r27

Finally upgraded Proxmox based 6.2 install to 7.0-41222. It took me good 3-4 hours to figure out how the new boot loader works, so hopefully information bellow will help others: 1. I am using LSI SAS 2008 flashed in IT mode to passthrough HDDs (4x4TB) 2. Also passing 82579LM ethernet card for dedicated network. 3. Booting VM from USB (couldn't get SATA boot to work properly). 4. Used this repo to build loader with mptsas and mpt2sas drivers 5. bromolow_user_config.json { "extra_cmdline": { "pid": "0x6387", "vid": "0x058f", "sn": "xxxxxx", "mac1": "xxxxxxx", "netif_num": 1, "DiskIdxMap": "0C", "SataPortMap": "1", "SasIdxMap": "0" }, "synoinfo": {}, "ramdisk_copy": {}, "extensions": [] } PS. I have RS18017xs+ and DS1817+ for production. This VM used for backup and test purposes.

Can someone, please, share VM config details from proxmox for this loader? I have 6.2 running ... compiled apollolake-7.0.1-42218 but can't find it online.

Well, I can passthrough lci to Ubunu VM for example, so from Proxmox setup standpoint everything works. Which boot loader did you use ?

Could you please share the link to boot loader you used. I can't get LSI controller recognized, so can't pass drives to xpenology. Every other VM works fine with this controller and pass.

Can some share steps to pass LSI controller to xpenology running on Proxmox ? I did everything possible and impossible, using multiple different loaders etc. I can pass controller to ubuntu vm and see drives but xpenology VM doesn't see drives.

Камера в душе - это круто

Еще раз спасибо за проверку. Ответ нашелся в конфигурации файрвола.

K сожалению, тот же результат с последним "лекарством". Сейчас проверю на 6.2... и на официальных Синолоджи серверах.

Уважаемый montagnic, Благодарен за Ваш ответ. Догадываться не надо, я ведь не просил Вас решить мою проблему Данный тест проводился на Хрени 6.1.7 (3617) и с последней версией СС (без лекарства) на две камеры.

Может кто нибудь подтвердить следующее: СС не активирует камеры без доступа в интернет. Т.е если NAS не может достучатся до Китайский Серверов, активация камер не происходит. Для эксперимента, заблокировал нас на уровне файрвола и вырубил камеру (disable) в SS. Когда включаю камеру (enable) висит активация, потом таймаут и камера оффлайн.

Thanks for your help

Watched that video and checked forum before posting. As I mentioned all sata ports are disabled so it is 8+8. I ended up configuring 16 ports, it works now. But first 4 slots empty so HDD #1 is in bay 5.

Hi, I have almost the same problem. In my case 2 LSI card used in IT mode with 12 HDD. Everything was fine with v5. Upgraded to the latest 6.1 and now 2 hard disks recognized as ESATA disks with default config files. Onboard sata ports disabled. Tried multiple different configurations, can't get it right. Disabled esata and usb in config (0x0). internalportcfg="0xfff". Any ideas what I am missing ?

Tа же проблема.

Расскажите, пожалуйста, как настраивали ЕПГ и иконки для каналов.

Есть на форуме тема про Хенсервер, в английской ветке. Я недавно открыл и написал, что если нужна помощь по установке обращайтесь. Все нормально работает, включая pci pass... Ставьте бета 10.4. Последняя (10.5) не работает с хен. viewtopic.php?f=2&t=3001

First of all thank you so much for your hard work. Synology is great product and I think this community will make it more popular. I just wanna share my experience with this product. I have 1 Synology (409+, 4.2) and Xpenology (4.3, based on Trantor's build) . 409+ still works as expected. Never had an issue with this box in 3 years. But it is time for replacement and it will be DS1513+. Xpenology based on LianLi PC-Q25, ASUS H87I-PLUS and 4 seagate drives. It is full functional test box for my Xenserver lab. I also tested WOL and HDD hibernation, no issues. I wanted to play with v5.0 and decided to install it on Xenserver 6.2 host with pci passthrough and was surprised by performance. Latest gnoboot 10.5 didn't work (Xen paravirtual support does not boot!?), but 10.4 works perfect. I have xenserver host patched with e1000 and vm gives me around 90-100MB/sec transfer speed. If anybody will be interested in running Xpenology under XenServer then I'll post step by step guide.