Dfds
-
Posts
598 -
Joined
-
Last visited
-
Days Won
16
Posts posted by Dfds
-
-
Please use the search facility before posting as you will often find the question has been answered already.
This card will work: https://www.amazon.co.uk/dp/B00AZ9T3OU/ref=psdc_949408031_t1_B00BUC3NNS?th=1
-
1
-
-
When asking for help it's useful to include details of the DSM version, which loader you're using & what hardware you're running.
-
Please use the search facility in future. You should be able to reinstall 6.1 using the guide below.
-
You should be able to migrate the disks to the new Synology box, which will keep all of your data intact. Having said that you should always ensure that you have a recent backup of any important data that you wish to keep.
-
Yes to both questions.
-
1
-
-
DSM is written to a hidden partition on all installed disks, synoboot.img is only used to boot.
-
1
-
-
A quick search of the forums would have yielded the information you're after
-
The question(s) in this topic have been answered and/or the topic author has resolved their issue. This topic is now closed. If you have other questions, please open a new topic.
-
Thanks for all your hard work @jun It's much appreciated by everyone in the community.
-
The question(s) in this topic have been answered and/or the topic author has resolved their issue. This topic is now closed. If you have other questions, please open a new topic.
-
The question(s) in this topic have been answered and/or the topic author has resolved their issue. This topic is now closed. If you have other questions, please open a new topic.
-
1 hour ago, Moredhel said:
Hi, I managed to get 1.02b and 6.1.4 working well on a HP N36L microserver.
I needed to use a supported NIC but otherwise it went smoothly, thanks to the developers!
The only thing I've found is that there is no option for SHR or SHR2 when building an array.
I just get the options for RAID 0,1,5,6 etc.
Is there anything that needs to be modified in grub to allow SHR to be used?
A quick search of the forums would have yielded the answer
-
7 hours ago, ryerye said:
Coming back to the initial question with some answers and no solution
I have bought a licence for the 3-rd cam which worked well on DS112 box.
The same licence worked also on baremetal Xpenology 6.02.
Now I have gone over to ESXi based environment and the licence does not activate anymore, giving the "connection failed" error
I have tried SN and MAC pair generated by the excel file available in the net.
I have also tried the original MAC and SN from the DS112, with still the connection failed message at activation the licence.
Might be that there are some detection mechanisms for non genuine HW. I also tried to fall back to the oldest possible surveillance station with no success.
My workaround: I am running separate Xpenology instance on ESXi for every pair of cameras. Not very convenient as they have separate timelines.
Still looking for a more permanent solution, and I'm ready to buy more licences if I get it working.
The reason it no longer works is because Synology have changed their T&C's around moving licences, even on genuine hardware.
-
4 hours ago, DigitalDaz said:
I had exactly the same grief without that C1E so thanks
No problem.
-
The question(s) in this topic have been answered and/or the topic author has resolved their issue. This topic is now closed. If you have other questions, please open a new topic.
-
You should be using all cores of the new CPU, the CPU info you see in control panel is hard coded & reflects what is in a genuine synology. You can check by running the following command
cat /proc/cpuinfo -
1 hour ago, jeimuzu said:
Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20). I'm currently just going through the extra.lzma ramdisk. section in the tutorial to see if I can find anymore answers.
Is there any particular reason for using this nic, as the N54's inbuilt nic works fine.
-
1 hour ago, Polanskiman said:
This is intended. His issue seems to be with network detection.
@Polanskiman My apologies, you're quite right, got a bit confused there.
-
1 hour ago, jeimuzu said:
Hi all,
I've done a fresh install using DS3615xs on my HP N54L using Jun's Loader V1.02b (grub file edit has been done -vid/pid/sn/mac), the only issue now is when I run Synology Assistant my hardware isn't being detected. The N54L is currently connected through my network card. Also, I've disabled C1E in my BIOS and disabled my firewall. I've attached my grub file for refernce, any help would be much appreciated.
In your grub file the AMD bare metal version menuentry is commented out so it's not surprising it won't boot. I would recommend resolving this & removing the other menuentrys then trying again.
-
@BIGCHEW151 Please use proper punctuation & spell check future posts to make them easier to read.
-
25 minutes ago, Dipeshn said:
Dfds your a Star i was just reading another users issue where he disabled the C1E and C3 in bios and it worked, and just read your reply
Yup that did the trick for sure im Back up and Running with both internal and the supported Intel one
Glad you're up & running.
-
As the N36 has an AMD cpu you will need to disable C1E support in the bios, also I would use the DS3615xs image. Not sure about the intel nic you've purchased but the inboard nic should work ok. You mention that you edited the Mac & SN, did you also set the USB'S VID & pid?
-
2
-
-
The question(s) in this topic have been answered and/or the topic author has resolved their issue. This topic is now closed. If you have other questions, please open a new topic.
-
The question(s) in this topic have been answered and/or the topic author has resolved their issue. This topic is now closed. If you have other questions, please open a new topic.
Compatible low cost SATA card for build.
in Answered Questions
Posted