463nt0ran63

Post a screen of your vm settings maybe I can see what you did wrong. Think most important is this sata settings. Also you should change the MAC address in the boot image to the one vmware is generating after first boot. Gesendet von meinem ONE A2003 mit Tapatalk

Ja aber wieso willst du die unmounten? Versteh ich nicht so ganz Gesendet von meinem ONE A2003 mit Tapatalk

Since plex does not support any hardware acceleration like gpu encoding, at least to my knowledge (and if so very experimental and on dsm only the hardware which is synology own and only used in specific synology boxes) I would say performance is, depending on your used hardware of course, same as bare metal. CPU power is what you are left with anyways and if you are able to do vt-d and vt-x or the AMD pendants virtualization is your friend. I pass the hba controller through to the xpenology vm and for dsm those drives are natively recognized with full speed of the controller (I think dsm limits here anyways - but dsm Speedtest shows maximum throughput of the hdd) But back to topic - it surprises me that the 58 drive config of the above video does not work for you. I am also wondering about SataPortMap in grub config file. I was under the impression that you bare metal guys have to tinker with that setting depending on the amount of controllers you use. For virtual environment so far I never touched this. Could there be a reason why this keeps breaking dsm? Gesendet von meinem ONE A2003 mit Tapatalk

Welche Laufwerke meinst du? Eigentlich solltest du in der config der vm nur eine ide disk haben die auf das Bootimage von jun verweist, alles andere sind deine datendisks Gesendet von meinem ONE A2003 mit Tapatalk

Same for me, regardless of what I setup in Synoinfo.conf, even configs which should work like in the above video. Dsm always resets. Are you on virtual environment like me? Which dsm version do you use, maybe synology changed something in the latest updates? I am on 6.1.4 Gesendet von meinem ONE A2003 mit Tapatalk

OK eben habe ich es verstanden, in der zweiten vm den selben Serial port konfigurieren als pipe mit gleichem Namen aber als Client. In der Client vm dann mit putty auf com1 und sobald sich auf der Konsole was tut sieht man es auch. Danke dafür! Das sowas aber nicht direkt in der vmware Umgebung geht.... Gesendet von meinem ONE A2003 mit Tapatalk

Wie dort von mir geschrieben, geht in der esxi free nicht, laut vmware mindestens enterprise:https://kb.vmware.com/s/article/2109507?r=2&Quarterback.validateRoute=1&KM_Utility.getArticleData=1&KM_Utility.getGUser=1&KM_Utility.getArticleLanguage=2&KM_Utility.getArticle=1 Das mit der pipe probiere ich mal.... Wie ist das mit der Gegenstelle gemeint? Eine X beliebige vm? Geht windows? Und was müsste ich dort dann einrichten? Gesendet von meinem ONE A2003 mit Tapatalk

Sobald ich die etc.defaults/Synoinfo.conf bearbeite sehe ich sofort in der webui den Effekt, aber nach einem reboot ist alles wieder beim Standard Gesendet von meinem ONE A2003 mit Tapatalk

Leider kriege ich insgesamt nur 16 Laufwerke in die esxi config - eine davon ist das Bootimage. Beim hochfahren mit Standard config bzw resetted config sind die 3 letzten plötzlich esata Laufwerke... Das Bootimage ist nicht zu sehen als ide Laufwerk. Ich hab es dann mal mit deinen Settings probiert, aber nach dem Neustart ist die diskstation wieder migrierbar. Was ich nicht so ganz verstehe ist das nachdem ich migriere und 6.1.4 wieder drauf ist, ist das einzige was in der etc/synoinfo.conf geändert ist die maxdisks = 12. Alle anderen Werte sind so wie ich sie eingegeben habe. Die etc.defaults/Synoinfo.conf ist aber auf werkseinstellung zurückgesetzt. Sollte ich eventuell mal nur die etc/Synoinfo.conf ersetzen? Gesendet von meinem ONE A2003 mit Tapatalk

Hi, Ich spiele schon einige Zeit mit der Synoinfo.conf. Mein Ziel ist es unter esxi 6.5 zwei lsi 9220-8i per pass-through an dsm 6.1.4 durchzureichen. Da ich schon eine dieser Karte in meiner produktiv xpenology nutze will ich nicht einfach die zweite Karte dazu stecken und mein setup zerstören. Daher dachte ich ich setzte eine test xpenology auf mit 2 SCSI Controller und je 8 disks Die synoboot.img disk als edi drive Die Synoinfo.conf passe ich so an: maxdisks="24" esataportcfg="0x0000000" internalportcfg="0x0ffffff" usbportcfg="0xf000000" Also 0 esata, 24 internal und 4 usb ports. Wenn ich die Synoinfo.conf hochlade in etc und etc.defaults sehe ich in web ui auch alles richtig, aber nach einem Neustart ist die test Maschine im migrate Status und muss neuinstalliert werden Hat jemand eine Idee? Gesendet von meinem ONE A2003 mit Tapatalk

Hi wie funktioniert das mit der pipe denn genau? Das ist doch um die Konsole zu sehen oder? Kann man das im esxi nachträglich einrichten? Als Option ist das ja beim serial port dabei.. Gesendet von meinem ONE A2003 mit Tapatalk

Is this still possible on esxi 6.5 free edition for you? For me a license issue is shown in the vmware.log of the virtual machine Is there maybe another way? Gesendet von meinem ONE A2003 mit Tapatalk

Works perfectly on esxi 6.5 Gesendet von meinem ONE A2003 mit Tapatalk

Thanks for the hint. Although it is not "nested" virtualization how vmware calls it, you can tick a CPU option in every vm to pass down the virtualization functions to the vm. Gesendet von meinem ONE A2003 mit Tapatalk

Yes I was also thinking that virtualization inside virtualization is not possible, but I don't know. Xeon e3 1230 v5, supermicro server board Gesendet von meinem ONE A2003 mit Tapatalk

Well this can't be it because if this would be inactive I could not run dsm with this loader on it. I want to enable virtual dsm inside my working dsm. Virtual machine manager package from synology Gesendet von meinem ONE A2003 mit Tapatalk

Is virtual dsm working for you guys? I can create vms but none is starting. It always complains about not enough space. Both ram and disk space I have more than enough. DSM 6.1.3 on esxi 6.5 Gesendet von meinem ONE A2003 mit Tapatalk

Where do you see the spin down? In the logs? If so in which exactly? What are you looking for? Gesendet von meinem ONE A2003 mit Tapatalk

One question to you guys trying to pass-through a raid controller in esxi : why? I simply pass the disk through with some esxi commands ls -l /vmfs/devices/disks Pick the string with t10.ATA And add the virtual raw device like this vmkfstools -z /vmfs/devices/disks/t10.ATA_____ST4000VN0002D2AH166__________________________________WDH0K40S /vmfs/volumes/datastore1/RDM/RDMdisk1.vmdk Afterwards you can add the disk in esxi vm settings You(esxi) have full control over this disk only disadvantage is the missing temperature and smart values in dsm although in console you can get that information, maybe somebody knows a workaround for that. A pro point is definitely no need for any drivers... Gesendet von meinem ONE A2003 mit Tapatalk

Seems so, I asked multiple times already and no positive answer yet. (please someone tell me otherwise [emoji12]) Gesendet von meinem ONE A2003 mit Tapatalk

I am using 6.0.2 (currently update 8) on esxi 6.5 for months now. I encountered no issues in dsm whatsoever. All official packages run perfectly. I also use lets encrypt certificates, works like a charm. I passed 4 hdds through via rdm, not the controller (googled how to do it, started on esxi 6.0 which didn't have this functionality built in into the gui, yet) my onboard controller can't be passed through unfortunately Throughput is like native performance no raid in use. Same with network performance Feel free to ask for specifics if you want to know Gesendet von meinem ONE A2003 mit Tapatalk

How did you install 1.02a2 DS3617 in ESXi? Did you write the image to an USB drive, and then boot your VM from the USB? or did you add the img as a disk in the VM? I had trouble getting it to install on my ESXi 6.5. It kept getting the File Corrupt (13) error during installation. Do you mean a real usb drive? That is not easily (and consistently) done in esxi. You would have to pass through the usb device to the vm to always have the same device present. Using the virtual USB device in esxi is not permanent. You would have to map the device to the vm on every boot manually. I personally don't do the bare metal way on esxi. Adding the drive is easier - or you could add a 5 bug pci usb controller card and pass it through to the vm. Gesendet von meinem ONE A2003 mit Tapatalk

Hi since you have the same environment setup like me (esxi 6.5) and tried with the latest loader too. May I ask you if you are able to migrate from 6.0.2 to 6.1? I tried with all 1.02 loaders now and after migration the VM is not visible anymore on the network. What I did is the following: - Installed xpenology 6.0.2 fresh on test environment, gave it the synoboot.img by adding the vmdk drive (which essentially is a link to the image file) and one additional drive all on scsi - edit grub file in image to have the mac1 address correct, nothing else Then I shut the vm down. Replaced the vmdk and image file with 6.1 loader 1.02a2. Edited grub file to match same mac1. Turned the VM back on. Got to the migration screen. Did migrate from ds3615 to ds3617 with keeping the data option. All went through without error. Then the assistant reboots and no xpenology anymore on the network. Synology assistant tool also does not find it anymore. I wonder if anybody made a successful migration on esxi, yet... Gesendet von meinem ONE A2003 mit Tapatalk

Hi since you have the same environment setup like me (esxi 6.5) and tried with the latest loader too. May I ask you if you are able to migrate from 6.0.2 to 6.1? I tried with all 1.02 loaders now and after migration the VM is not visible anymore on the network. What I did is the following: - Installed xpenology 6.0.2 fresh on test environment, gave it the synoboot.img by adding the vmdk drive (which essentially is a link to the image file) and one additional drive all on scsi - edit grub file in image to have the mac1 address correct, nothing else Then I shut the vm down. Replaced the vmdk and image file with 6.1 loader 1.02a2. Edited grub file to match same mac1. Turned the VM back on. Got to the migration screen. Did migrate from ds3615 to ds3617 with keeping the data option. All went through without error. Then the assistant reboots and no xpenology anymore on the network. Synology assistant tool also does not find it anymore. I wonder if anybody made a successful migration on esxi, yet... Gesendet von meinem ONE A2003 mit Tapatalk

Did you do a fresh install or migration? If last I would be interested in how you did it Gesendet von meinem ONE A2003 mit Tapatalk ...i did fresh. I have to re-format hdd's for btrfs support. Only in HP Proliant i have to put manual ip configuration. DHCP don't work so good. Could one readd the drives after a fresh install? What would happen? Loss of data? Gesendet von meinem ONE A2003 mit Tapatalk