Leaderboard

If you want the disks to be possible to be read by a physical system in the future i would choose directly.

Hello everyone, I would like to share a personal project that I am developing. It is another loader for TTG Redpill, intended to be as automatic and user-friendly as possible. The link is below, download the image and record it on a flash drive, the rest is done on the same computer. I'm Brazilian and I'm not good at English language, so forgive me for translation errors. I used forum knowledge and code from various loaders developed by TTG, pocopico, jumkey, Jun and many others. Hope you like it. https://github.com/fbelavenuto/arpl Edit: An important information that I forgot to mention is that I developed a simple patch to no longer display the DUMMY port error on models without device-tree, the user will be able to install without having to worry about it

List of mirror links to DSM 5.x and DSM 6.x boot loaders. Please drop a comment if you see a broken link or some erroneous information. All other posts will be deleted. Before downloading a loader I suggest you read this topic (for DSM 6.x) or this topic (for DSM 7.x) to know which loader to download. DSM 7.x - Read Flyride topic Tinycore-redpill (TCRP) Releases | Download is straight from Github. Link to code: https://github.com/pocopico/tinycore-redpill OR (the choice is yours) Automated RedPill Loader (ARPL) Releases | Download is straight from Github. Link to code: https://github.com/fbelavenuto/arpl --------

Ah ok cool thought i did something wrong here. All good then will do manual updates Thanks again for your time and support as always,

That part regarding DSM update is not that important for TCRP FRIEND. You don't have to spend your energy on it. You just have to respond appropriately when the next update comes out, whether it is manually installed or automatically installed. No problem.

It is adding a mid boot process for automatically handling DSM updates.

I edited my post and at the top it said it's OK after installing via GUI Thank's very much

In Poland it's a cheapest card. At the Polish portal <40USD. In the ebay.com about 30USD (ship from china) For our NAS is ideal

htanh034 said: I'm upgrading arpl 0.4-alpha12 to v1.0-beta2 with an error below. how do fix it, tks ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Get a NEW USB and rebuild the loader With the new v1.0-beta2 in the machine 1. Same Model 2. Same Build 3. Same serial number Everything will load up as before when done , No need to make easy into hard

Hi both, if its bnx2x the extension is available here : https://github.com/pocopico/rp-ext/tree/main/bnx2x netxen_nic should be possible... let me check. EDIT : @arTii I created the extension for you. You can try https://github.com/pocopico/rp-ext/raw/main/netxen_nic/rpext-index.json

You can't upgrade from alpha to Beta, you need to download the new archive start scratch from there and if you want to keep your config, just copy the whole text to notepad in alpha and paste it to beta.

The power consumption measured by Jonsbo N1Case and ASUS IOT H310Mi-IM-A R2.0 + MOBO + G5500 introduced in the review above and The separately prepared ECS BAT-I V1.2 J1900 discloses the measured power consumption under the same disk conditions. Because the captured photo is a Korean-style power meter, Hangul is included. Each item will be explained in advance. Power consumption is in the upper left, voltage is in the upper right, current is in the lower left, and usage time is in the lower right. As you can see in the picture, my main XPE Jonsbo N1, G5500-54W (1 cache SSD, 5 3.5 inch HDD) consumes 45.2 W in IDLE. ECS MOBO's J1900-10W (1 cache SSD, 5 3.5-inch HDDs) used in the test consumes 42.8 W in IDLE. The difference in power consumption between the two XPEs is 2.4 W, which is not much difference. For a long time, I've seen the XPE community buy low-power CPUs at high prices. Even among users, it is said that there is no need to insist on a low-power CPU. If possible, low power is advantageous, but expensive, It might be worth thinking about whether a lower-power CPU that pays a higher price actually saves a lot of power.

./my.sh DS3622xs+F realmac as per - https://xpenology.com/forum/topic/61839-tinycore-redpill-loader-build-support-tool-m-shell/ Also i tested it now with the below and i got it to work. ./rploader.sh clean now ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS3622xs+ realmac ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh ext ds3622xsp-7.1.1-42962 add https://raw.githubusercontent.com/pocopico/redpill-load/master/redpill-virtio/rpext-index.json ./rploader.sh ext ds3622xsp-7.1.1-42962 add https://raw.githubusercontent.com/pocopico/redpill-load/master/redpill-acpid/rpext-index.json ./rploader.sh build ds3622xsp-7.1.1-42962 withfriend exitcheck.sh reboot

What is your network card model?

It will not be possible to create your loader with 1GB RAM on the VM. You will need 2GB minimum