Leaderboard

yes it is

Due to many further questions/problems here in the thread, I would like to expand the topic to all models of the Synology "+" series and all questions about internal flash memory regarding hardware replacement, image repair, elsewhere with a new topic. Synology model upgrades are also possible here: As already mentioned, the thread owner also has the opportunity to close this topic here. From my side, thank you @wool very much for the information about the pin-out and the ideas that came from it.

Ага) И тебе привет)

as my 7.1 long term informations where older i looked it up, looks like the is a catch to that (at least now) only older units (presumably kernel 3.10, mostly 2015 units and older) will get one more year up to 6/2025, namely the ds3615xs, the other commonly used types like 3617 or 3622 will loose update support 6/2024 and will have to be updated to 7.2 (if security updates are important) https://kb.synology.com/en-global/WP/Synology_Security_White_Paper/3 looks like i will have to upgrade my dva1622 in the next 3 month to 7.2 there was also a "Synology E10G18-T1" with that performance problem so it might stretch to more nic's or its something different but if exchanging the driver on the already running system clears the speed problem then it would be clearly that issue forgot to mention it but my test system was using arc loader, as most loaders have there ow deriver set its worth checking the driver version and comparing to the original driver from synology (if there is one), in some cases it might not work using synology's drivers as there might not cover other oem versions of nic's, seen that with ixgbe drivers on 6.2 (but also tehuti and other intel drivers and realtek 2.5G nic driver) so it might not work to "downgrade" the driver to syno's original in some cases, that might result in a non working nic, it might find the device but if the phy chip is not supported the it will not show any connection or the driver might not load at all so in case of experiments like that its handy to keep a 2nd nic inside that can be used if the 10G nic fails to work after changing the driver

The Intel 10G ixgbe modules of DS3617xs(broadwell) and DS3622xs+(broadwellnk) operate somewhat specially. Both models must use the vanilla ixgbe that was originally built into the original model. I don't know if the TCRP of pocopico you used has adjustments for this vanilla module. rr and my mshell have this vanilla ixgbe adjustment. ixgbe compiled separately from redpill should only be used on other than these two platforms broadwell / broadwellnk. These two files are vanilla module files that are imported directly from the original module in Synology. The module pack is managed by overwriting this file on top of the ixgbe compiled by redpill. https://github.com/PeterSuh-Q3/arpl-modules/blob/main/vanilla/broadwell-4.4.302/ixgbe.ko https://github.com/PeterSuh-Q3/arpl-modules/blob/main/vanilla/broadwellnk-4.4.302/ixgbe.ko I hope you try it with rr or mshell.

6MBit like 1000 times less? thats like not working at all i have my main with 7.1.1 and backup system with 7.2.1, the later one does 250 MByte/s with a bunch of older disks and hyperbackup rsync (not tested wit iperf) so from the 7.1.1 to 7.2.1 is no problem the main 7.1.1 from a win11 system makes 1G Byte/s as long as it fills up ram and then drops to 650MB/s, cant ask for more (good nvme ssd on win11 and 20GB single file) just tested it for 7.2.1 from win11 and its the same as with 7.1.1, 1GByte/s as long as its ram and then ~600MByte/s (no iperf neede here if it looks that good already) (win11 and 7.1 is a sfp+ mellanox and 7.2 a rj-45 Tehuti TN9210 based (might be similar to you syno card) there are some base differences even with systems having the same dsm version, 3615 is kernel 3.10 but 3617 and 3622 are both 4.4 so looks no like its not related to that as 3615 and 3617/22 seem to perform both badly but anyway try arc loader arc-c (sa6400) with 7.2.1 that's kernel 5.x and might be different any switch involved there might be differences when connecting directly or through a switch as of how speed is negotiated what speed does the system show (ethtool eth0 | grep Speed) when its only 6Mbit/s its interesting but if you want to save time consider just keep it with 7.1, as its a LTS version and afair will get the same support as 7.2, if there are no features you need from 7.2 you dont miss anything when just using 7.1

Подтверждаю. Обновление прошло без проблем в штатном режиме.

Much better is to setup DS3622xs. Yes, you have to select a new model (in loader setup), build a loader, boot into freshly built loader, get into web and migrate to a new model DSM, preferring to save settings.

https://web.archive.org/web/20210412133958/https://global.download.synology.com/download/DSM/release/6.1.7/15284/DSM_VirtualDSM_15284.pat

There's an internet archive for this sort of thing https://web.archive.org/web/20210305152847/https://archive.synology.com/download/Os/DSM

Я обновился на старом загрузчике Arc 23.11.15 . Проблем нет

Обновление без проблем пройдет из самого DSM.

Moved to: https://github.com/RROrg/rr

le lien ne marche plus la discussion n'est plus la

Hi DSfuchs. I managed to download the DOM. Can you give me an email address to send you the link to the DOM image file? Thanks!

Mise à jour terminée, je suis maintenant en DSM 7.2.1-69057 Update 4

зависит от версии ESXi. хотя на рутрекере (через впн) всё есть (обычно достаточно SN указать)

в ссылку добавились лишние символы - вот так правильно: https://www.programmersought.com/article/53224542504/ Сделали всё верно, я забыл ещё: если что-то пробрасываем в виртуалку, то надо вот этот крыжик ещё включить:

Unfortunately, it never occurred to me that such a mistake could be made. If I can, I'll make a backup of the DOM. Tomorrow I'll try to see if it works and what's on it. If I can get it to come back to life, I'll make an img file and send it over. Thanks a lot for your help!

А не в Модулях ?

Is there no one moderating these forums anymore ? I posted a new topic for Version: 7.2.1-69057 Update 5 3 days ago and it is still waiting approval !

Ну привет брат вахтовик)

Предполагаю что диск который вы заменили нормальный. А диски отключаются по питанию одни и те же или разные? Тут 2 варианта или питалово или плохой сата коннект. Если диск нормальный и отваливаются одни и те же диски то вероятность больше в том что плохие сата коннекты. Если разные диски то надо смотреть в сторону бп. Еще может быть контроллер. Но это уже после проверки первых двух причин.

an interesting motherboard. But for Xpenology NAS, it is valuable in it only 8 SATA ports. The rest of the possibilities are redundant

Вспомнил. При каком-то из обновлений винда отключала smb 1 и из-за етого крашилась сеть. Нужно было зайти в компоненты и включить.

Du gros "game changer" comme j'adore, personnellement j'ai fais une migration vers le dsm 7.2 (DS3622xs+) de mon dsm 7.1 (DS3615xs) avec chargeur redpills virtualisé sur vmware workstation pro, sa se passe sans problème pour ce faire; j'ai mis moins d'1 heure, bravo pour cette version du chargeur et merci à toute la communauté

Для быстрой проверки лучше использовать Security Advisor, он стоит по умолчанию в DSM 7. Порты приложений желательно менять от стандартных, особенно к DSM и размещать переадресацию на роутере вручную. У меня частенько после перезапуска роутера порты upnp не поднимаются сразу автоматом.