freddie Posted July 1, 2023 Share #26 Posted July 1, 2023 Hello, So just build the loader and run Friend After the install ? Quote Link to comment Share on other sites More sharing options...
freddie Posted July 2, 2023 Share #27 Posted July 2, 2023 Le 30/06/2023 à 22:38, djvas335 a dit : Just friend, with friend no postupdate necessary hello GOOD NEWS, it worked thanks a lot i'm silly sometimes LOL thanks again to help me !! I installed it and reboot => go to nas ip it saying (recoverable) I clik it => go on TCRP friend and he says that Ramdisk and rz image changed, I waiting it changed by him-self => go on browser to see and worked login page. Quote Link to comment Share on other sites More sharing options...
sagrotan Posted July 4, 2023 Share #28 Posted July 4, 2023 On 5/23/2023 at 3:30 PM, Peter Suh said: (Warning) There is a problem with the mpt3sas driver (module). (ARPL, TCRP are the same) Users who use the SAS controller Dell Perc H200, H310, etc. that use the module should not upgrade until the stabilization module is released. I think pocopico should fix it again. Tested on DS3622xs+ (Broadwellnk). https://github.com/pocopico/redpill-modules/blob/master/broadwellnk-4.4.302/mpt3sas.ko https://github.com/PeterSuh-Q3/arpl-modules/blob/main/broadwellnk-4.4.302/mpt3sas.ko Tried to get form 7.1 to 7.2 yesterday, but failed with loss of my DSM Apps & Settings. DSM was not able to recognize my passtrough drives on ESXi. After some information here and in GIT about mpt3sas problems, I decided to revert back to 7.1.1 with loss of my Settings. I am currently confused, if my struggle was caused by the mpt3sas Issues, or just my personal config fault. Is the mpt3sas Issue still there? Great forum and projects, but sometimes hard to get the current valid information in threads across month an several product versions. Thanks for reading Mat Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 4, 2023 Author Share #29 Posted July 4, 2023 3 hours ago, sagrotan said: Tried to get form 7.1 to 7.2 yesterday, but failed with loss of my DSM Apps & Settings. DSM was not able to recognize my passtrough drives on ESXi. After some information here and in GIT about mpt3sas problems, I decided to revert back to 7.1.1 with loss of my Settings. I am currently confused, if my struggle was caused by the mpt3sas Issues, or just my personal config fault. Is the mpt3sas Issue still there? Great forum and projects, but sometimes hard to get the current valid information in threads across month an several product versions. Thanks for reading Mat The current situation is as follows. Right below the post at the time, I mentioned the mpt3sas module issue once again. When loading the module, the error message was confirmed, but there was no problem in operation. ARPL-i18n's wjz304 also highlighted this benefit. But I still don't know why this error message occurs. So far, there has been no reporting of any problems while using the mpt3sas module for 7.2. Quote Link to comment Share on other sites More sharing options...
sagrotan Posted July 4, 2023 Share #30 Posted July 4, 2023 Thanks a lot for your reply. So it was my own inability to include the module successfully. As far as I read in the meantime, it is part of the all modules package which can added with the "ext" statement. Will try it again in a few days. Thanks again Mat Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 4, 2023 Author Share #31 Posted July 4, 2023 7 minutes ago, sagrotan said: Thanks a lot for your reply. So it was my own inability to include the module successfully. As far as I read in the meantime, it is part of the all modules package which can added with the "ext" statement. Will try it again in a few days. Thanks again Mat The final versions of ARPL and TCRP no longer add individual modules. All modules including mpt3sas are already included in the tgz file, which is an integrated module pack. You don't have to make that kind of effort that you're planning on your next try. https://github.com/PeterSuh-Q3/arpl-modules/releases/tag/v1.40 Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted July 11, 2023 Share #32 Posted July 11, 2023 the SAS controller Dell Perc H200, H310, etc On a dell R320 are not working, Says no drives found. It's flashed in IT mode. tried setting up RS4021 now if I use loader arpl-i18n-23.6.8 sas works fine. I would like to use your loader but it's not possible at the moment... Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 11, 2023 Author Share #33 Posted July 11, 2023 48 minutes ago, painkiller895 said: the SAS controller Dell Perc H200, H310, etc On a dell R320 are not working, Says no drives found. It's flashed in IT mode. tried setting up RS4021 now if I use loader arpl-i18n-23.6.8 sas works fine. I would like to use your loader but it's not possible at the moment... It seems that wjz304 has some improvements related to the format error of mpt3sas that was modified a while ago. I will review it and apply it to M SHELL for TCRP as well. https://github.com/wjz304/arpl-modules/commit/d10a7519c8ab492651bc2c727e828eab3ced0263 Quote Link to comment Share on other sites More sharing options...
pocopico Posted July 11, 2023 Share #34 Posted July 11, 2023 1 hour ago, Peter Suh said: It seems that wjz304 has some improvements related to the format error of mpt3sas that was modified a while ago. I will review it and apply it to M SHELL for TCRP as well. https://github.com/wjz304/arpl-modules/commit/d10a7519c8ab492651bc2c727e828eab3ced0263 MPT3SAS will fail to load using eudev cause it is exporting duplicate scsi_transport_sas symbols. This has been solved on latest all-modules tcrp-addon. 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 11, 2023 Author Share #35 Posted July 11, 2023 According to the instructions of pocopico, in M SHELL You can choose from the following 3 modes: DDSML (modprobe+insmod) Only DDSML + EUDEV EUDEV Only In the sas module affected by the above, it seems that EUDEV Only needs to be adjusted so that it is not used. 1 Quote Link to comment Share on other sites More sharing options...
pocopico Posted July 11, 2023 Share #36 Posted July 11, 2023 14 minutes ago, Peter Suh said: According to the instructions of pocopico, in M SHELL You can choose from the following 3 modes: DDSML (modprobe+insmod) Only DDSML + EUDEV EUDEV Only In the sas module affected by the above, it seems that EUDEV Only needs to be adjusted so that it is not used. Only the systems that include scsi_transport_sas (e.g. ds3622xs+) will fail to load mpt3sas/hpsa/mvsas using EUDEV. The rest will load properly the modules 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 11, 2023 Author Share #37 Posted July 11, 2023 (edited) M SHELL also searches for three modules mpt3sas/hpsa/mvsas and changes to prevent EUDEV ONLY from being selected. https://github.com/PeterSuh-Q3/tinycore-redpill/commit/24533766ae669d50e44a172cde2fab5906516769 Edited July 11, 2023 by Peter Suh Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted July 12, 2023 Share #38 Posted July 12, 2023 so will there be a fix for sas ? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 12, 2023 Author Share #39 Posted July 12, 2023 2 hours ago, painkiller895 said: so will there be a fix for sas ? Do you use pocopico's TCRP? Do you use my M SHELL? The two TCRPs have slightly different ways of loading SAS modules. pocopico also applied the supplementary corrections once more yesterday. I already had no problems inside DDSML mode. You didn't mention which of the two you tried with TCRP. 2 Quote Link to comment Share on other sites More sharing options...
painkiller895 Posted July 13, 2023 Share #40 Posted July 13, 2023 (edited) Thanks Peter and pocopico, I rebuilt the RS4021xs+ in M Shell loader I put it in DDSML to see if it would work and YES it's working ! sas is back! added a 10gb nic card and server is up and running well. Thanks again... Edited July 13, 2023 by painkiller895 1 Quote Link to comment Share on other sites More sharing options...
freddie Posted September 17, 2023 Share #41 Posted September 17, 2023 hello everybody, since this morning when i would like to connect my NAS, I Have (Sorry, the page you're looking for was not found) on the Login page How i can fix it please. thanks a lot PS: I erase the USB Stick, downloaded lastest Redpill and DSM, U1. Reinstalled and nothing same problem.. hum . Quote Link to comment Share on other sites More sharing options...
ULSY Posted October 10, 2023 Share #42 Posted October 10, 2023 Hi, I just burn the M SHELL Image: https://github.com/PeterSuh-Q3/tinycore-redpill/releases/download/v0.9.5.0/tinycore-redpill.v0.9.5.0.m-shell.img.gz to my 32GB USB Flash Drive. When I boot from it I get: Quote Link to comment Share on other sites More sharing options...
Captainfingerbang Posted November 3, 2023 Share #43 Posted November 3, 2023 On 7/12/2023 at 10:24 AM, Peter Suh said: ee Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted November 3, 2023 Author Share #44 Posted November 3, 2023 4 hours ago, Captainfingerbang said: Are you interested in my Github Repo? ^^ Quote Link to comment Share on other sites More sharing options...
Captainfingerbang Posted November 3, 2023 Share #45 Posted November 3, 2023 (edited) 15 hours ago, Peter Suh said: Are you interested in my Github Repo? ^^ I absolutely love the repo! i have 2 problems. And PLEASE READ MY FULL POST BELOW INCLUDING PHOTOS! Recently backed up, tore down, and rebuilt ds918+ on 7.2.1-69057 Baremetal and i forget which build of yours i was using and having some weird problems. I have the build with 4 squares like below Attached image. . After years of great success, my 918+ is so slow sometimes only 10mb/s write speed benchmarks. I need to know if i need any other packages etc to run this also. And can i use this script from 007revad/Synology_HDD_db ? Is this script compatible with your builds? https://github.com/007revad/Synology_HDD_db The reason i ask if script is compatible as because i am using (3)2 month old 1tb ssd SO SLOW for example, and on two identical ssd drive im getting 485mb read and 10mb write speed on benchmarks every day. Before, i was getting full speed with your builds. Look at image below. And why is my Xeon running at only 1.2Ghz instead of around 2.4-3.6ghz like its supposed to? Is there an error log i can post to you? or similar? Can you help me? System DS918+ 7.2.1- 69057 Baremetal ALL SSD'S Gigabyte X99 UD3P E5-2680v4 28gb ram (7) of 2tb Sata SSD's and (3) 1tb Sata Ssd's on 2 volumes each SHR-1 Edited November 3, 2023 by Captainfingerbang Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted November 4, 2023 Author Share #46 Posted November 4, 2023 3 hours ago, Captainfingerbang said: I absolutely love the repo! i have 2 problems. And PLEASE READ MY FULL POST BELOW INCLUDING PHOTOS! Recently backed up, tore down, and rebuilt ds918+ on 7.2.1-69057 Baremetal and i forget which build of yours i was using and having some weird problems. I have the build with 4 squares like below Attached image. . After years of great success, my 918+ is so slow sometimes only 10mb/s write speed benchmarks. I need to know if i need any other packages etc to run this also. And can i use this script from 007revad/Synology_HDD_db ? Is this script compatible with your builds? https://github.com/007revad/Synology_HDD_db The reason i ask if script is compatible as because i am using (3)2 month old 1tb ssd SO SLOW for example, and on two identical ssd drive im getting 485mb read and 10mb write speed on benchmarks every day. Before, i was getting full speed with your builds. Look at image below. And why is my Xeon running at only 1.2Ghz instead of around 2.4-3.6ghz like its supposed to? Is there an error log i can post to you? or similar? Can you help me? System DS918+ 7.2.1- 69057 Baremetal ALL SSD'S Gigabyte X99 UD3P E5-2680v4 28gb ram (7) of 2tb Sata SSD's and (3) 1tb Sata Ssd's on 2 volumes each SHR-1 I suspect your SSD is performing poorly. What is the model name of the SSD? Is this a product that uses QLC? Quote Link to comment Share on other sites More sharing options...
Captainfingerbang Posted November 8, 2023 Share #47 Posted November 8, 2023 On 6/1/2023 at 5:05 PM, Orphée said: @K1000 On 11/3/2023 at 10:09 PM, Peter Suh said: I suspect your SSD is performing poorly. What is the model name of the SSD? Is this a product that uses QLC? out of 10 discs i found two Timetec 1tb each brand new, can read at 450 but only write at 10 and 20mb/s. Could this be: Because they arent "compatible" or Something with loader or Something else? I backed up, started fresh on 918+,removed the two slow drives, and now it seems much snappier! Thanks no qlc in those. no dram cache, only slc. Btw should i have disc cache writing enabled for ssd's in array and also How often would one run data scrub on 10tb of all ssds? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.