nemesis122 Posted January 14, 2023 Share #26 Posted January 14, 2023 (edited) pls delete Edited January 14, 2023 by nemesis122 Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted January 14, 2023 Share #27 Posted January 14, 2023 4 minutes ago, haldi said: Uhm, if i may ask, what exactly is different about the official ARPL. What are the extra changes made for HP Microserver Gen8? there is no different to the original ARPL 1.03b but i have saved for me and this loader works on the gen8 one word -->perfect in any case ! Only You need to set the CPU governor to performance for the full power feeling the idle consumption is the same but the power is double or tripled Quote Link to comment Share on other sites More sharing options...
yquzac Posted January 14, 2023 Author Share #28 Posted January 14, 2023 I had no issue with 1.03b except HDD spindown, using TCRP mshell HDD doesn't spindown on 7.1.1 but not sure if that's 7.1.1 issue, however my TCRP with 7.1.1 I have no SAN Manager just stops and asks me to repair however doesn't work. But sure why either. Quote Link to comment Share on other sites More sharing options...
haldi Posted January 14, 2023 Share #29 Posted January 14, 2023 Ahh thanks. Because official Releases are at V1.0 Beta 11a now. Running a E3 1265L with 2.4Ghz. on v0.5 Alpha loader. Seems to run fine a max Frequency... but Performance is still bad. Quote Haldi@NAS:~$ sudo dmesg | grep MHz [ 0.000000] tsc: Detected 2394.305 MHz processor [ 3.689277] tsc: Refined TSC clocksource calibration: 2394.560 MHz Haldi@NAS:~$ cat /proc/cpuinfo | grep MHz cpu MHz : 2394.305 cpu MHz : 2394.305 cpu MHz : 2394.305 cpu MHz : 2394.305 cpu MHz : 2394.305 cpu MHz : 2394.305 cpu MHz : 2394.305 cpu MHz : 2394.305 System Information Operating System Linux 4.4.180+ x86_64 Model HP Synoden Motherboard N/A BIOS HP J06 Processor Information Name Intel Xeon E3-1265L Topology 1 Processor, 4 Cores, 8 Threads Identifier GenuineIntel Family 6 Model 42 Stepping 7 Base Frequency 2.39 GHz L1 Instruction Cache 32.0 KB x 4 L1 Data Cache 32.0 KB x 4 L2 Cache 256 KB x 4 L3 Cache 8.00 MB Memory Information Size 7.66 GB Geekbench 5 Score 352 Single-Core Score 1309 Multi-Core Score Quote Link to comment Share on other sites More sharing options...
yquzac Posted January 14, 2023 Author Share #30 Posted January 14, 2023 Mine was low, when used CPU governor to performance performance was back up, have you tried running the script nemesis mentioned? Quote Link to comment Share on other sites More sharing options...
haldi Posted January 14, 2023 Share #31 Posted January 14, 2023 Yes. But it probably didn't work. Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted January 15, 2023 Share #32 Posted January 15, 2023 (edited) hi both found some intressting things Test with V1.0 Beta 11a and with the gen8 it is working tested 3622xs and for full power you have to set in bios :the highest import setting are OS Control Mode for the performance Mode!!! this is only aI3 this is working without the CPU Governor Command https://browser.geekbench.com/v5/cpu/19897082 with OS Control Mode https://browser.geekbench.com/v5/cpu/19895998 with the wrong settings Power Management was at Performance a BAD RESULT F9 -> RBSU In RBSU: - System Options -> Serial Options -> Virtual Serial Port: Enabled -> Embedded NICs -> NIC 1 Boot Options: Disabled -> NUMLOCK Power-On State: On -> SATA Controller Options -> Embedded SATA Configuration: Enable SATA AHCI Support - Power Management Options -> HP Power Regulator: OS Control Mode -> Advanced Power Management Options -> Intel QPI Link Power Management: Enabled -> Minimum Processor Idle Power Core State: C6 State -> Minimum Processor Idle Power Package State: Package C6 (retention) State -> Maximum Memory Bus Frequency: Auto -> Memory Interleaving: Full Interleaving -> PCI-E Gen 3 Control (For Select Devices) -> PCI-E Slot 1: Enabled -> Maximum PCI Express Speed: Maximum Supported -> Dynamic Power Savings Mode Response: Fast -> Collaborative Power Control: Enabled -> DIMM Voltage Preference: Optimized for Performance - Date and Time: Datum und Uhrzeit korrekt einstellen - BIOS Serial Console & EMS -> BIOS Serial Console Port: Enabled - Advanced Options -> Advanced System ROM Options -> NMI Debug Button -> Disabled -> Virtual Install Disk -> Disabled -> Power-On Logo -> Enabled - System Default Options -> User Default Options -> Save User Defaults -> Yes, Save Beginn Installation OS Edited January 15, 2023 by nemesis122 Quote Link to comment Share on other sites More sharing options...
freak Posted March 14, 2023 Share #33 Posted March 14, 2023 Hello all, To contribute, here is my Gen 8 E3-1265 score with ARPL v1.1-beta2a (BIOS : OS Control Mode, no extra command) https://browser.geekbench.com/v5/cpu/20870400 Quote Link to comment Share on other sites More sharing options...
Petitgnoll6 Posted April 21, 2023 Share #34 Posted April 21, 2023 Hi everyone, I've got a gen8 with 1265v2 and dsm 6.2.3 (ds3617xs). Working fine but no hardware transcoding. I've noticed you were talking about having a dgpu but I though it wouldn't work neither for hardware transcoding with gen 8, even with tinycore and newest loaders. Did it change and could i get hardware transcoding with my baremetal gen 8 ? Thanks for the help guys Quote Link to comment Share on other sites More sharing options...
IG-88 Posted April 22, 2023 Share #35 Posted April 22, 2023 12 hours ago, Petitgnoll6 said: Hi everyone, I've got a gen8 with 1265v2 and dsm 6.2.3 (ds3617xs). Working fine but no hardware transcoding. I've noticed you were talking about having a dgpu but I though it wouldn't work neither for hardware transcoding with gen 8, even with tinycore and newest loaders. Did it change and could i get hardware transcoding with my baremetal gen 8 ? 3615/17 dont come with i915 driver needed for intel qsv and there are parts missing in the kernel so you cant just compile additional drivers (like its done for network and storage drivers) any platform with build in i915 driver needs at least a haswell (4th gen) cpu and microserver gen8 is 2nd/3rd gen cpu's the only ray of light might be sa6400 (only unit with kernel 5.x, epyc based) where Jim Ma added a i915 driver by also adding things missing for i915 in the kernel config https://xpenology.com/forum/topic/68067-develop-and-refine-sa3600broadwellnk-and-sa6400epyc7002-thread/ 1st i cant say for sure if sa6400 will need 4th gen, its still a beta release (i did not test that and i cant remember seeing anyone writing about that) 2nd is in theory someone could apply the same technique to other (future 5.x based units, dsm 7.2 will keep all kernels as it is now so we talk about new units with a new platform in 2023 and dsm 7.3 in 2024), so in 2024 there might be be ds3622 based on dsm 7.3 and kernel 5.x that get the same treatments as sa6400 got now, but thats a lot of time and if's (as we dont know if dsm 7.3 will bring kernel 5.x to most units as it was done with 7.0 where most units changed from 3.x to 4.x - also 7.3 is a placeholder it might be dsm 8.0 next year instead) beside trying jim ma's sa6400 arpl loader on "older" cpu's there is nothing that could be done atm - at least with dsm/xpenology - you could switch to open media vault and have i915 working immediately, its just creating a (additional) boot disk (or usb) and replace the usb xpenlology loader with that, the data raid partitions will be recognized and should be usable ootb (there might be a problem with volume naming but that can be solved) https://xpenology.com/forum/topic/42793-hp-gen8-dsm-623-25426-update-3-failed/#comment-200475 you could remove the OMV boot media at any time and re-add the xpenology usb loader and have DSM back, the dsm partions (1st and 2nd on every disk) will not be touched so dsm with its config will stay put until its used again) Quote Link to comment Share on other sites More sharing options...
Petitgnoll6 Posted April 22, 2023 Share #36 Posted April 22, 2023 (edited) Thanks for your detailed answer ! Nice news for jim ma's loader, i'll follow that (but with baremetal install kinda hard to test if it's the production server xD). And that was indeed what I though for the cpu and it doesnt change anything by adding a dedicated GPU, right ? (that's what you are trying to by telling me I can't compile additional drivers ?) And about switching to OMV that could be a great idea, but I'm on SHR partitions and I though it wouldn't work out of synology (maybe I would be able to switch SHR to a raid 5 ? But having same size disk ?) Thanks for your help ! Edited April 22, 2023 by Petitgnoll6 Quote Link to comment Share on other sites More sharing options...
haldi Posted May 23, 2023 Share #37 Posted May 23, 2023 (edited) Soo.... 7.2 officially released! Which Loader would you recommend? Arc Loader: https://github.com/AuxXxilium/arc ARPL i18n: https://github.com/wjz304/arpl-i18n HP Microserver Gen 8 Baremetal as always.... 3622xs image is still first choice right? Anyone already got it running? Edited May 23, 2023 by haldi Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted May 24, 2023 Share #38 Posted May 24, 2023 (edited) 19 hours ago, haldi said: Soo.... 7.2 officially released! Which Loader would you recommend? Arc Loader: https://github.com/AuxXxilium/arc ARPL i18n: https://github.com/wjz304/arpl-i18n HP Microserver Gen 8 Baremetal as always.... 3622xs image is still first choice right? Anyone already got it running? both loader are working great with the gen8 i would go with ARC But anyway the new docker App Container Manager is terrible cant create shortcuts on DSM for docker Containers anymore -- and i dont want creating this with webstation also so i will stay with DSM 7.1 Edited May 24, 2023 by nemesis122 Quote Link to comment Share on other sites More sharing options...
haldi Posted May 24, 2023 Share #39 Posted May 24, 2023 (edited) i tried. But Network didn't work.... Sysinfo: Used 3622xs Build: 64561 and some Modules: No need for certain Network driver right? the HP 223i works out of the box? as there is no module to include. Then i tried a build without any Addons or Modules.... that one finally worked after around 15 Seconds network was reachable. (though the IP was showing up before, i just didn't connect and timed out) Edited May 24, 2023 by haldi Quote Link to comment Share on other sites More sharing options...
haldi Posted May 25, 2023 Share #40 Posted May 25, 2023 P.S DiskHibernationFix addon doesn't work! ArcPatch might or might now work... haven't tried. For Wireguard you obviously need a new SPK. PreBuilt can be found here: https://www.blackvoid.club/wireguard-spk-for-your-synology-nas/ and i think they patched Container Manager today to bring back the shortcuts for DSM Desktop icons. Quote Link to comment Share on other sites More sharing options...
JP-PC supplies Posted July 20, 2023 Share #41 Posted July 20, 2023 Hello, arpl works fine but when i want to install dsm the installation stops at 55 % ,somebody knows what to do? regards Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.