Jump to content
XPEnology Community

TinyCore RedPill loader (TCRP) - Development release 0.9

pocopico

By pocopico
in Developer Discussion Room

 Share

Recommended Posts

pocopico Guru Master

pocopico

Posted
  • Author
Posted
On 9/27/2022 at 8:30 PM, Dreadnought said:

anything regarding the bootloop? 

 

TCRP Friend cannot find the loader disk to mount.

 

There is a 5 second timer until TCRP Friend tries to boot DSM. I need you also to stop with ctrl-c and run the following commands  and send me the output ? 

lspci -nnq 
lsusb 
fdisk -l 
Link to comment
Share on other sites
Peter Suh Guru Master

Peter Suh

Posted
Posted
4 minutes ago, pocopico said:

 

TCRP Friend cannot find the loader disk to mount.

 

There is a 5 second timer until TCRP Friend tries to boot DSM. I need you also to stop with ctrl-c and run the following commands  and send me the output ?

 

lspci -nnq 

lsusb 

fdisk -l 

 

 

The lspci -q option is not supported.
Would lspci -nn or lspci -tvnn be enough?

 

1089892239_2022-09-2710_40_33.thumb.png.1f9a526e8bd13b4a03587955227cd3c2.png

Link to comment
Share on other sites
Blubster Junior Member

Blubster

Posted
Posted (edited)

lspci -nnq does not work, it says : 

root@tcrpfriend:~# lspci -nnq
lspci: DNS queries are not available in this version

It did it without the q though, it can be interesting perhaps?

lspci.txt

The other commands :

patchkernel.txt

patchramdisk.txt

Thanks a lot!!!

 

EDIT : i grabbed the results using ssh, very convenient!!! In my case, /mnt/tcrp corresponds to the 3rd partition on the usb drive.

Edited by Blubster
Link to comment
Share on other sites
Peter Suh Guru Master

Peter Suh

Posted
Posted

@pocopico


Now, the download of the friend repo on Github has been stabilized, and all updates can be processed.

 

On my main XPE, the ASUS H310, which had the problem, I'm still getting the same error from the NVMe cache.

 

So, I tried it on the DELL T1700, which was prepared as a test PC.

 

Again, I prepared NVMe cache and recognized it as DS3622xs+ bare metal.

 

The contents of the capture are after booting through the TCRP friend loader on the DELL T1700.

 

849563940_2022-09-281_20_02.thumb.png.0d9047dd3944d501e546bf1a001007d7.png

 

Represents the NVMe cache caught by the storage manager.

 

The difference between the two NVMe cache installation methods is that ASUS H310 is installed in the built-in M.2 slot,

 

and DELL T1700 is installed through a separate external M.2 adapter PCIE type card.

 

I'll try more when I get another MOBO with a built-in M.2-type slot I have.

 

What is the singularity?

 

Will the log file left in /mnt/tcrp help in analyzing the cause?

 

 

  • Like 1
Link to comment
Share on other sites
pocopico Guru Master

pocopico

Posted
  • Author
Posted
On 9/28/2022 at 1:39 AM, Dreadnought said:

 

Hm I tried but no update was detected or installed, so the problem still remains:

IMG_7010.thumb.jpg.d5e06bab7b05ad1f4eab74535a7a4dbf.jpg

Okay, I have to suggest one more thing, after booting press, CtrlC, and execute 

mount /dev/sdb3 /mnt/tcrp 
mount /dev/sdb1 /mnt/tcrp-p1
mount /dev/sdb2 /mnt/tcrp-p2
./boot.sh
Link to comment
Share on other sites
Dreadnought Super Member

Dreadnought

Posted
Posted
On 9/28/2022 at 1:57 AM, pocopico said:

Okay, I have to suggest one more thing after booting press, CtrlC, and execute 

mount /dev/sdb3 /mnt/tcrp 
mount /dev/sdb1 /mnt/tcrp-p1
mount /dev/sdb2 /mnt/tcrp-p2
./boot.sh

 

What should I say, you are my hero!

Now it's working, I am able to successfully boot and update to DSM 7.1.1

  • Thanks 1
Link to comment
Share on other sites
Dreadnought Super Member

Dreadnought

Posted
Posted
1 minute ago, pocopico said:

 

I'm afraid this will be a bit to small. Can you replace it ?

 

Unfortunately not, it is hard connected to the mainboard.

 

I found another issue, on 7.1.1. I am not able to activate WOL.

I have configured the real MAC address as normal. I will try it with the other DSM versions.

 

I used the following ACPID extension: https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-acpid/rpext-index.json

Maybe I will try the one of dodo-dk or jimmyGALLAND.

Link to comment
Share on other sites
pocopico Guru Master

pocopico

Posted
  • Author
Posted
26 minutes ago, Dreadnought said:

 

Unfortunately not, it is hard connected to the mainboard.

 

I found another issue, on 7.1.1. I am not able to activate WOL.

I have configured the real MAC address as normal. I will try it with the other DSM versions.

 

I used the following ACPID extension: https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-acpid/rpext-index.json

Maybe I will try the one of dodo-dk or jimmyGALLAND.

 

The MAC address is written while booting. Please also check your linux line while booting for the MAC Address

Link to comment
Share on other sites
  • Polanskiman changed the title to TinyCore RedPill loader (TCRP) - Development release 0.9

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...