Search the Community

Hi guys I'm running arpl on a hp gen 8 microserver, model ds3622xs, dsm 7.2.1 69057 update 4 with the latest arpl release. When I insert a USB drive a message pops up saying a newly inserted drive has been detected, if I go to storage manager it's there to be formatted. Anyone any ideas how to recognise the usb drive as a usb. TIA

After nearly more than one year I have a problem on my DS3622x (on ESXi-7.0U3o-22348816) Today in the morning I rebooted and Redpill Friend updated to 0.0.6 and I lost three drives. I checked them in the BIOS on the LSI SAS9211-8i IT controller and all are visible. I am not quite sure what could happened. I thought maybe something crashed so I decided to update to DSM 7.2, (I was going to do it anyway ) so I did it and I used new tinycore-redpill.v0.10.0.0.vmdk file and create new bootloader I used the same MAC and SN. I have one physical drive (HDD) connected to SATA port on the motherboard and 6 SSD drives connected to above SAS controller -> pass-through. After I type ./rploader.sh satamap tc@box:~$ ./rploader.sh satamap Machine is VIRTUAL Hypervisor=VMware Found SCSI HBAs, We need to install the SCSI modules scsi-5.10.3-tinycore64 is already installed! Succesfully installed SCSI modules Found "02:00.0 VMware SATA AHCI controller" Detected 30 ports/1 drives. Mapping SATABOOT drive after maxdisks Found "02:01.0 VMware SATA AHCI controller" Detected 30 ports/1 drives. Defaulting 8 virtual ports for typical system compat ibility Override # of ports or ENTER to accept <8> Found SCSI/HBA "03:00.0 LSI Logic / Symbios Logic SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05)" (0 drives) Computed settings: SataPortMap=18 DiskIdxMap=1000 Should i update the user_config.json with these values ? [Yy/Nn] y Done. I created bootloader and proceed with installation and upgrade. In the new system I still cannot see these three drives: ( I attached pictures) I would like ask for the advice or help what I can do. Thanks M

My buddy is in need of a loader rr, arc,tcrp etc etc that allows for 40 drives, PLUS allows for using am HBA card like lsi 9x00 or close. Like HD6500 but with the ability to install and use hba cards.. Anything like this out there? Even if its a mish mash of patches/drivers ?

Is there an in-depth tutorial on how DSM/Xpen responds to changes in SATA disks? (perhaps also covering USB). I ask because so far all I can find are forum responses "do this", "edit sataportmap/DiskIdxMap values", "I did this..." Do I have to reinstall/recover whenever I rearrange drives? I'm hoping for an in-depth planning guide that covers a lot of general info, AFTER INSTALL, on what happens / what-to-do when adding/rearranging SATA drives, controllers, swapping out drives (e.g. for single-disk volumes), covering all scenarios. And perhaps about attaching/removing USB dives too. Again, so all I've found are posts that address specific issues when somebody is migrating a drive, or adding a new drive... I'm hoping to find a broad tutorial that answers questions I don't have yet. More... Rather than one-time build a reasonably spec'd box, I'm using misc leftover hardware, so I expect to have a lot of sata drive changes over time (tho I expect that's not ideal, I'm just the type that will tweak-as-I-go.) My choice hardware is very limiting (Lenovo M900 tiny), and I know I should just use more suitable stuff, but... I'm still in discovery mode, and when I get far along then I'd like to avoid having to rebuild from scratch. So what's specifically eluding me is... Using ARC loader, I seem to need at least one Sata drive to install -- I can't install on NVMe? Even tho I thought I'm installing on the USB stick, is it really installing on a base sata drive? What happens if I wish to remove the 1st (only) sata drive at a later time to upgrade it? Does this 1st sata drive get used for core DSM apps, so it's required and can't be removed? Is rearranging SATA drives a matter of "edit config file and cross fingers"? No dynamic behavior by DSM? If I were to use a JBOD sata box (my sata port supports port-multiplier), and occasionally pop in a drive, or delete a volume and remove a drive, whether I'll have to edit the If I were to add an ASMedia or JMB585 secondary sata controller, then could I jockey sata drives on those? I've been monkeying with DS920+, which doesn't seem to have satamap command ... should I switch to DS3622xs+? So with this external sata JBOD 5-bay drive rack, if it's so much trouble to swap drives, I could instead connect it with a USB-SATA bridge (instead of attaching it to an add-on sata controller), and use via File Station(?) That would be quite limiting -- no software DSM-based RAID (I'm fine with that), but would I otherwise be able to share files via apps like Plex Server off of those USB-attached drives? Any links to tutorials that address these topics? Thanks!!!

This project started about two weeks ago at the suggestion of @wjz304 . A guide that can be processed with Jun's loader in DSM 6 already exists as shown below. This method requires a lot of manual work through MS Windows. Redpil plans to create a simpler automatic script as a menu function. https://github.com/PeterSuh-Q3/tinycore-redpill/blob/main/menu_m.sh#L1688 The part where tcrp-mshell is slightly different from rr is tcrp, as its name suggests, is a redpill loader that uses tinycore Linux, so it includes one more kernel. The kernels used by rr and tcrp are as follows. 1. rr kernel (tcrp is friend kernel) 2. dsm kernel (same for tcrp) 3. tc kernel (tcrp only) rr contains all the functions that the tc kernel and friend kernel must perform in the rr kernel. This is why the menu starts directly with ./menu.sh in the rr kernel. The reason I explained these kernels is Ultimately, these kernel files (2 per kernel) must be ported to the hard drive. The existing DSM 6 Jun's loader had a kernel size of only 50M, so 100M of spare space at the end of the first hard drive was sufficient. However, Red Pill is equipped with various kernels, and the files for each kernel are close to 100M. 1. tc kernel (20M, mydata.tgz backup file is variable) 2. Friend kernel (61M fixed size) 3. dsm kernel (based on ds3622xs+ 7.2.1-69057, 82M initrd-dsm is variable [including driver modules and addons for each model]) The loader on the original USB stick is all in the 3rd partition with a lot of free space. It is impossible to store all of this in 100M on one hard drive. Give up less and only take items 2 and 3 and use 2 hard drives. Two hard drives created as Basic or JBOD type are required. Assuming that the structure of each hard drive on which the storage pool is created is of the above two types, It consists of system partition 8G + 2G and data partition (the entire remaining area). I thought there was only about 100M space behind the data partition. If you look closely, there is about 128M more free space between the system partition and data partition. You will see that the Start / End sectors are not connected and are empty. In the meantime, create an extended partition, sd#4, and create additional logical partitions where the bootloader partitions should exist. This capture shows bootloader partitions 1, 2, and 3 split into two hard drives. The first partition has 98M space. Contains the friend kernel from number 2 above. Because the location of the kernel changed, modifications were made to a separate grub.cfg. The existing boot loader searches for (hd0, msdos1) and includes the part where grub is set to boot. Use grub-install to readjust it to point to (hd0,msdos5) = /dev/sd#5. Activate /dev/sd#5, which corresponds to the first partition of the boot loader, to Active so that the hard drive can boot grub on its own. The second partition does not require a lot of space, but The important part contains rd.gz extracted from the original dsm pat file. When an update for SmallFixVersion is detected, it automatically assists in update processing through Ramdisk automatic patching. Currently, DSM 7.2.1-69057 is a file required to automatically update U0 to U4. In the 3rd partition The DSM kernel for each model is included. This is a kernel file that keeps changing and being regenerated every time you rebuild the loader. The intermediate file custom.gz (contains rd.gz and the driver) is also included. Because the size is not trivial, the final result, initrd-dsm, contains almost the same content. We have found a way to exclude it and have recently reflected it in the friend kernel version upgrade in advance. In the case of rr, the size of custom.gz and initrd-dsm contains too many modules (e.g. wifi module, etc.) compared to tcrp. As it is, only 2 hard drives are insufficient. I am not sure if wjz304 is well aware of this and is adjusting the kernel size related to this. With this preparation in place, you can boot with the bootloader implanted using only two BASIC type hard drives. For this purpose, remove the original bootloader, USB or SATA DOM bootloader. Up to this point, I have implemented the bootloader script and completed the first test. Following this topic, I would like to separately explain the problems and solutions I would like to consider.

Hi, using DSM7, with a set of HDD connected to motherboard. But i needed more SATA ports, so purchased an ASM1116 card. It is not detected. Anyone managed to make it work? Ty!

I am trying install DSM 7.2 - DS3622xs+ on the following system: Ryzen 5 4650g Rog Strix b550i (4xsata, 2xNvme) 32gb ram On motherboard sata: 2xSSD for Proxmox boot, 2xSSD for Proxmox VMs, 2xNVME for Xpenology cache On LSI/Broadcom SAS3008 HBA Controller in IT Mode: 4x18tb HDD, 2x SSD for VMs, 2xSata empty for future expansion ARC Loader 21.4.24.img I followed some PCIE passthrough tutorials to install xpenology using the manual HDD pass-through method which worked fine but was limited to 6 sata ports only. Installed with ARC Loader 21.4.24, selected the first option for SataportMap: Active Ports*. When I got to the find.synology.com screen, it recognized I had drives 2 to 7 and installed DSM. However, I would like the option to have more drives in the future, so I scrapped the VM and try to install again by passing the whole HBA card to the VM itself. I added- Raw Device - select HBA Card - ROM-BAR and PCI-Express Checked. I have tried every option for the SataportMap, but each time I get 'No Drives Detected'. In the Arc Loader sysinfo, when you scroll down, it recognizes the HBA card and says it has 6 drives attached to it. This told me that the loader can see the drives, so I manually passed through one of my NVME drives using scsi. When you get to the find.synology.com screen, it recognized the 1 nvme drive and was able to install DSM. When it finally loads, my 4x18th and 2xSSDs attached to the HBA are visible and working fine in DSM. So what am I missing? Can I not boot into DSM without having at least one HDD or SSD manually passed through? My eyes are going cross trying to troubleshoot every possibility, I wanted to list here everything I have done to troubleshoot but that would be a huge post. Should I skip trying to pass through the whole HBA Card and just manually pass through the drives? How do I add more drives then? Any suggestions are welcome.

Hello everyone, I am using DSM 6.2.2-24922 update 6 system on my Dell Vostro 3900 MT i5-4460 computer, with four storage pools (Synology Hybrid RAID SHR without data protection) of sizes 2x 926 GB, 1x 3.63 TB and 1x 14.55 TB. Two days ago, one of the 14.55 TB disks had a failure and in the "Storage Manager" module, I received a message saying "Cannot use this storage pool. Data may be damaged. Try copying data before removing the storage pool." The status field shows "Damaged" while the "Health Status" field shows "Normal." Unfortunately, I am not sure what could be causing this issue. In the "HDD/SSD" module, I found the information that "This disk has been removed from the storage pool by the system. Please replace the disk and go to the Storage Pool tab to select the pool that needs repair, then click Actions > Repair" - unfortunately, after following these steps, the "Repair" option is greyed out and cannot be clicked. Using "File Station", I was able to access some of the directories stored on this disk and managed to transfer some of the necessary data - however, I have also lost system applications such as VPN server and others that were installed on this disk. I kindly ask for help from the esteemed members of this forum in solving this challenge - any advice or suggestions would be greatly appreciated. PS Sorry if I raised this topic in a wrong place - if so, please point me where I should post it.

I have a fully functional DS412+. I want to try DSM 7.2 on it. Here's what I did: 1) Removed the DOM from the motherboard 2) Use Rufus to write the Arc loader to a USB stick (PID=F400, VID=F400) 3) Insert the USB stick into the front USB port of the DS412+ 4) Power on the unit 5) Access the Arc loader web console (port 7681) to configure the loader. Chose DS918+ as the model. Build the loader. 6) From Arc loader, choose "Boot the loader". 7) It boots into DSM. I can access the web for DSM installation. But it says "No drives detected on DS918+". I think it's the SATA mapping issue in the loader because those drives work fine in native DSM 6.2. How shall I troubleshoot? Thank you! I also read from this thread that the DSM image can be mod to spoof another model (e.g. spoof a 412+ into a 713+). How is that option compared to the loader option? Thank you!

i lost all my data so rebuilt the loader i used before. now some of my drives are that connected via the lsi hba card are showing as external drives. any ideas how i can make that appear as internal drives so i can add them to my pool. The loader is aprl

Hi, Currently, I have a motherboard: GA-B85M-DS3H, it has 4 x SATA3 + 2 SATA2, total of 6 drives, it can support. CPU is an Intel i7-4770 CPU based on socket 1150, Haswell architecture. This motherboard support hot-swappable drives in the BIOS/UEFI. So, in order to take advantage this feature, I need have 6 drives connected during DSM installation? I am about to start 1st installation of DSM 7.x, however after reading the is information about selecting the hardware: DSM 7.x Loaders and Platforms - Tutorials and Guides - XPEnology Community I windows user for many years, not a linux pro. so naturally, I a bit confused about these terminologies: 1) SataPortMap 2) DiskIdxMap 3) device tree Questions: 1) If I am to select the architecture: apollolake, DS918+, how many drive would it be display within DSM, the number = 4, right? 2) Can appollolake, DS918+ supports more than 4 drives, but cosmetically, it can only show 4 drives? 3) What happen if I can a extra HBA into the PCI-E x16 slot, which can support 4 more drives, same issue, it will only shows 4 drives? 4) How to map out drives? 5) What is RAIDF1 support means? Thank you.

Hi all! It's my first topic in this forum and I'm not very sure that this is the right subplace but I here is my question: I can't create a volume on a HP Gen10 with a H240 controller card and 4x2TB SAS drives. The system see the disks but no way to create a volume, after a couple of seconds, a message shows that the volume can not be created. But on the original motherboard controller, I have no problem to create another Raid volumen with SATA disks.... My Xpenology is 7.2.1 ds3622xs+. Thx for watching and BIG THX to all community

I'm trying to update my Synology_HDD_db script but I've been having issues getting E10M20-T1, M2D20 and M2D18 working in DS1823xs+, DS1821+ and DS1621+ in DSM 7.2-64570-U2 and later. These 3 models all use device tree, have 2 internal M.2 slots and do not officially support E10M20-T1, M2D20, M2D18 or M2D17. Setting the power_limit in model.dtb to 100 for each NVMe drive does not work for these models. The only way I can get more than 2 NVMe drives to work in DS1823xs+, DS1821+ and DS1621+ is to replace these 2 files with versions from 7.2-64570 (which I'd rather not do). /usr/lib/libsynonvme.so.1 /usr/syno/bin/synonvme And there are error messages in synoscgi.log, synosnmpcd.log and synoinstall.log With 3 NVMe drives installed the logs contain: nvme_model_spec_get.c:90 Incorrect power limit number 3!=2 With 4 NVMe drives installed the logs contain: nvme_model_spec_get.c:90 Incorrect power limit number 4!=2 I suspect that the DS1823xs+, DS1821+ and DS1621+ have the number of M.2 drives hard coded to 2 somewhere. If I restore these 2 files to the versions from 7.2.1-69057-U1 /usr/lib/libsynonvme.so.1 /usr/syno/bin/synonvme And add the default power_limit 14.85,9.075 the Internal M.2 slots show in storage manager and the fans run at normal speed. The "Incorrect power limit" log entries are gone, but synoscgi.log now contains the following for NVMe drives in the E10M20-T1: synoscgi_SYNO.Core.System_1_info[24819]: nvme_model_spec_get.c:81 Fail to get fdt property of power_limit synoscgi_SYNO.Core.System_1_info[24819]: nvme_model_spec_get.c:359 Fail to get power limit of nvme0n1 synoscgi_SYNO.Core.System_1_info[24819]: nvme_slot_info_get.c:37 Failed to get model specification synoscgi_SYNO.Core.System_1_info[24819]: nvme_dev_port_check.c:23 Failed to get slot informtion of nvme0n1 synoscgi_SYNO.Core.System_1_info[24819]: nvme_model_spec_get.c:81 Fail to get fdt property of power_limit synoscgi_SYNO.Core.System_1_info[24819]: nvme_model_spec_get.c:359 Fail to get power limit of nvme1n1 synoscgi_SYNO.Core.System_1_info[24819]: nvme_slot_info_get.c:37 Failed to get model specification synoscgi_SYNO.Core.System_1_info[24819]: nvme_dev_port_check.c:23 Failed to get slot informtion of nvme1n1 I get the default power_limit 14.85,9.075 for the DS1823xs+, DS1821+ and DS1621+ with: cat /sys/firmware/devicetree/base/power_limit | cut -d"," -f1 Apparently other models don't have /sys/firmware/devicetree/base/power_limit

Everyone knows that the DS923+ model supports using nvme hard drives as storage pools. By comparing synoinfo.conf, I found that this option is the key to enabling this feature. support_m2_pool="yes" I used sa6400 for testing, I can indeed see the nvme hard disk in the hard disk list, but when I try to add him as a storage pool, I encountered an annoying compatibility reminder, as shown below, I also Try to turn off the hard disk compatibility option through the following configuration, support_disk_compatibility="no" I also added the model and compatibility support of my corresponding hard drive to almost all files in the /var/lib/disk-compatibility directory, but the page still has a compatibility report, anyone have any better suggestions?

Hi, I'm completely new is this XPEnology topic, so please forgive me if this is a very stupid question. I have a custom build Intel hardware and worked thru the tutorial to install DSM 7. At the beginning everything looked quite good. At first boot I had no HDD installed. DSM claimed that it needs HDDs (surprise....) So I installed three WD NAS HDDs, that were completely empty, not formatted at all. After I booted again I got the message "We have discovered that the hard disks from another NAS...." Only option is "Restore". Takes 10 minutes and I end up at the same message, Tried three times now. Any ideas? Thanks

Got DSM 7.2 up and running on ESXi 6.7. Then did a transfer from DSM 6.2.3 to the DSM 7.2 machine which is configured as a DS3266xs+ all data remained perfectly on 7.2 after enabling the controller as a passthough as I did on 6.2.3 Odd things is that it's showing the drives on ports 10-16 when I only have this configured as a 12 bay. Is there anyway to fix it where it shows drive 1-6 or make this into a 24 bay, or do I just leave it as is?

Hi everyone, after month of preparation I finally assembled my own xpenology NAS. My storage solution is made of 2x500 GB SATA directly connected to the motherboard and 4x4 TB SAS connected via LSI 9260 8I controller. At startup the PC correctly detected controller and allows me to configure a RAID 5 volume The problem is that when I start synology i cannot see the RAID volume. I also tried to force DSM to recreate but it doesn’t work anyways. Anyone with the same problem? Do I have to install some drivers for synology to detected my new hardware? thx everyone for your help

Hello, I hope someone can help me. My NAS was running for about a year without problems. But then i installed a new CPU..... This is what i did: Installed the newest BIOS and swapped my "old" i3-12100 to a i7 13700k. Booted up the system, set my XMP Profile and Fan Curve and Booted right into the ARPL Loader that i used right before i swapped the CPU and boom: Its German and means: No Drives detected in your DS3622xs+. connect drives and click "refesh" and so on... I tryed swapping the i3 back in and downgrading the Bios without any luck. The Problem is here to stay. I also other versions of ARPL, also no luck. I dont know what else i can do to fix this... The Sata Controller is in AHCI Mode and Hotswapp is turned on (tryed it with off as well). My board: Biostar B660GTN with Realtek RTL8125B 2,5Gbit onboard LAN. I use the onboard SATA Connectors. Is this maybe some Sata Portmapping issue? In the ARPL setup i can see 4 greyed out DUMMY Ports and 4 green Ports. So the detection from ARPL should work fine or not? Thanks for helping and sorry for my bad english

Hi, I am a complete newbie when it comes to XPenology, but have some experience with an actual Synology NAS (DS418Play) and have had some disk fail on me and replaced them in the Synology NAS, which works fine and is very simple. However, I am contemplating setting up a DSM on Proxmox in the near future and I was wondering how to replace a failing hard drive, as they need to be manually passed through to the VM. I assume that replacing a failing hard disk is possible, otherwise using this DSM software on Proxmox does not make much sense. Any information on if this is possible and how, would really help me in deciding if I want to go this route and install XPenology on my Proxmox server.

Last week something happend to my long running 6.1 platform in vmware - suddenly it wouldnt boot at all. I tried to fix it but ended up with not being able to, and created a 7.2 install in vmware aswell. I have two controllers passed through to the vm - one onboard and a LSI 9300-16i .. satamap sees the controllers, sees the correct number of discs, but when I boot into DSM, it only shows 12 discs. Not 14 as is there.. I tried to change the model to a RS4021xs+ in hopes that it was some limit in the ds3622xs+, but that didnt help. in the synoinfo.conf it says maxdiscs 24, I also tried to change the internsataportcfg but im unsure if im doing it right.. Any help is greatly apreciated!

Всем привет. Собственно, мигрировал на диски большего размера по инструкции с сайта synology, перед этим отключил на всякий случай кэш (2 диска кэш чтение/запись к одному тому, 1 диск на кэш чтения к другому). Миграция прошла успешно, но бывшие кэшевые диски стали в таком статусе, инструкции с сайта synology не помогают. Стереть диски через SecureErase не могу, система сообщает, что диски используются, хотя они и не используются. Вынимал диски и сносил с них файловую систему, форматил в другой тип файловой системы на винде и маке, поставил в другой хренолоджи и создал на одном пул ресурсов, но после установки в основной NAS все равно картина с дисками такая, как на скрине. DSM 7.2-64570 Update 3, arcloader, Intel Xeon E5-2673 v3, Huananzhi QD3

Hi all, This is my first attempt at installing Xpenology, I have a DS918+ for my own use and would like to convert an old Windows Home Server for a family member. I'm guessing the drivers for CN896 North Bridge or VIA VT8251 South Bridge are not loaded, it's picked up one of them as "JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)" but I'm not sure how to proceed. Motherboard: VIA EPIA SN 18000G with 4GB DDRII 667 CPU: VIA C7 1.8GHz NanoBGA2 processor with FSB 800 MHz 4 S-ATA II connectors VIA CN896 North Bridge VIA VT8251 South Bridge http://cdn.viaembedded.com/eol_products/docs/epia-sn/operating_guide/OG_EPIA-SN_v1.10.pdf I have 4 1TB SATA 3.5" drives connected but only two are showing - any idea how I can add the other two? I used win32diskimager-1.0.0-install.exe to install tinycore-redpill.v0.9.4.9.img ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb Found MEMUP SerialNumber: 077B15B105A3 Vendor ID : 0x13fe Product ID : 0x1e20 Should i update the user_config.json with these values ? [Yy/Nn] ./rploader.sh serialgen DS3622xs+ Interface selected : eth0 Serial Number for Model = 20C0SQRLJFDVP Mac Address for Model DS3622xs+ = 00:11:32:AC:B8:D2 Should I update the user_config.json with these values ? [Yy/Nn] ./rploader.sh satamap Found "02:00.0 JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)" Detected 2 ports/2 drives. Override # of ports or ENTER to accept <2> 4 Non-numeric, overridden to 0 Computed settings: SataPortMap=1 DiskIdxMap=00 Should i update the user_config.json with these values ? [Yy/Nn] n OK remember to update manually by editing user_config.json file ./rploader.sh build ds3622xsp-7.2.0-64570 DSM_DS3622xs+_64570.pat ./rploader.sh backup ./rploader.sh backuploader exitcheck.sh reboot

I'm trying to setup a DS918+ but my Gigabyte motherboard has 5 SATA instead of 6 as one is dedicated to an NVME. I'm getting this error message. I was able to install successfully but I'm concerned that in the future this port might cause an issue. Any idea on how to resolve this? tc@box:~$ ./rploader.sh satamap Found "00:17.0 Intel Corporation Device 43d2 (rev 11)" Detected 6 ports/1 drives. Bad ports: 1. Override # of ports or ENTER to accept <6> 6 Computed settings: SataPortMap=6 DiskIdxMap=00 WARNING: Bad ports are mapped. The DSM installation will fail!

Hi guys, I have XPEnology installed on a baremetal Gen8 Microserver. Until yesterday I had a stable running DS3622xs+ with DSM 7.1.1-42962. Decided to upgrade to 7.2.0-64570 and at the same time to add the 5th SATA port on the motherboard to the satamap in order to use it for the Survaillance station. Built the loader pretty easily following this Tutorial: Install/Migrate to DSM 7.x with TinyCore RedPill (TCRP) Loader Restarted, bootloader worked, Synology Assistent found the DS, I connected to it and installed DSM 7.2.0-64570 manually from the file I've downloaded from Synology download section beforehand. Restarted again and... the problem. The DS is found but only in Recoverable status. When I chose to Recover it starts installing DSM for a second or two, than restarts and 10 mins later - Something went wrong Then connecting to the DS again just to find it in Recoverable status again. Obviously something's wrong but I can't figure it out myself. Am I missing something in the bootloader? Or else? Can anybody help to identify and resolve the issue? Here's the log of bootloader building process: login as: tc tc@192.168.0.250's password: ( '>') /) TC (\ Core is distributed with ABSOLUTELY NO WARRANTY. (/-_--_-\) www.tinycorelinux.net tc@box:~$ ./rploader.sh update Checking Internet Access -> OK Checking if a newer version exists on the main repo -> Version is current tc@box:~$ ./rploader.sh fullupgrade Performing a full TCRP upgrade Cloning into 'tinycore-redpill'... remote: Enumerating objects: 1178, done. remote: Counting objects: 100% (1178/1178), done. remote: Compressing objects: 100% (956/956), done. remote: Total 1178 (delta 239), reused 1094 (delta 201), pack-reused 0 Receiving objects: 100% (1178/1178), 18.29 MiB | 16.98 MiB/s, done. Resolving deltas: 100% (239/239), done. Please make sure you are using the latest 1GB img before using backup option Current /home/tc size is 49M , try to keep it less than 1GB as it might not fit into your image Should i update the sdf with your current files [Yy/Nn] y Backing up home files to sdf : Backing up files to /mnt/sdf3//mydata.tgz Done. tc@box:~$ ./rploader.sh identifyusb Found Generic Ultra SerialNumber: 000002660A01 Vendor ID : 0x0424 Product ID : 0x4030 Should i update the user_config.json with these values ? [Yy/Nn] y tc@box:~$ ./rploader.sh serialgen DS3622xs+ realmac Serial Number for Model = 2150SQRMXKZ5W Mac Address for Model DS3622xs+ = 00:11:32:39:74:BD Real Mac Address : 00:11:32:08:29:70 Notice : realmac option is requested, real mac will be used Should i update the user_config.json with these values ? [Yy/Nn] y tc@box:~$ ./rploader.sh satamap Found "00:1f.2 Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05)" Detected 6 ports/5 drives. Override # of ports or ENTER to accept <6> 5 Computed settings: SataPortMap=5 DiskIdxMap=00 Should i update the user_config.json with these values ? [Yy/Nn] y Done. tc@box:~$ cat user_config.json { "general": { "model": "DS3622xs+", "version": "7.1.1-42962", "smallfixnumber": "0", "zimghash": "", "rdhash": "", "usb_line": "", "sata_line": "", "redpillmake": "prod", "friendautoupd": "true", "staticboot": "false", "hidesensitive": "false" }, "ipsettings": { "ipset": "", "ipaddr": "", "ipgw": "", "ipdns": "", "ipproxy": "" }, "extra_cmdline": { "pid": "0x4030", "vid": "0x0424", "sn": "2150SQRMXKZ5W", "mac1": "001132082970", "netif_num": "1", "SataPortMap": "5", "DiskIdxMap": "00" }, "synoinfo": { "internalportcfg": "0xffff", "maxdisks": "16", "support_bde_internal_10g": "no", "support_disk_compatibility": "no", "support_memory_compatibility": "no", "maxlanport": "8", "netif_seq": "0 1 2 3 4 5 6 7" }, "ramdisk_copy": {} } tc@box:~$ vi user_config.json tc@box:~$ cat user_config.json { "general": { "model": "DS3622xs+", "version": "7.2.0-64570", "smallfixnumber": "0", "zimghash": "", "rdhash": "", "usb_line": "", "sata_line": "", "redpillmake": "prod", "friendautoupd": "true", "staticboot": "false", "hidesensitive": "false" }, "ipsettings": { "ipset": "", "ipaddr": "", "ipgw": "", "ipdns": "", "ipproxy": "" }, "extra_cmdline": { "pid": "0x4030", "vid": "0x0424", "sn": "2150SQRMXKZ5W", "mac1": "001132082970", "netif_num": "1", "SataPortMap": "5", "DiskIdxMap": "00" }, "synoinfo": { "internalportcfg": "0xffff", "maxdisks": "16", "support_bde_internal_10g": "no", "support_disk_compatibility": "no", "support_memory_compatibility": "no", "maxlanport": "8", "netif_seq": "0 1 2 3 4 5 6 7" }, "ramdisk_copy": {} } tc@box:~$ ./rploader.sh build ds3622xsp-7.2.0-64570 bspatch does not exist, bringing over from repo % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 10232 100 10232 0 0 100k 0 --:--:-- --:--:-- --:--:-- 100k Rploader Version : 0.9.4.9 Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/pocopico/redpill-lkm.git : Redpill module branch : master Extensions : all-modules eudev disks misc Extensions URL : "https://github.com/pocopico/tcrp-addons/raw/main/all-modules/rpext-index.json", "https://github.com/pocopico/tcrp-addons/raw/main/eudev/rpext-index.json", "https://github.com/pocopico/tcrp-addons/raw/main/disks/rpext-index.json", "https://github.com/pocopico/tcrp-addons/raw/main/misc/rpext-index.json" TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download TOOLKIT_SHA : a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/bromolow-source/linux-3.10.x.txz/download SYNOKERNEL_SHA : 18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : ds3622xsp TARGET_VERSION : 7.2.0 TARGET_REVISION : 64570 REDPILL_LKM_MAKE_TARGET : dev-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE : modules.alias.4.json SYNOMODEL : ds3622xsp_64570 MODEL : DS3622xs+ Local Cache Folder : /mnt/sdf3/auxfiles DATE Internet : 28062023 Local : 28062023 Checking Internet Access -> OK Checking if a newer version exists on the main repo -> Version is current Cloning into 'redpill-lkm'... remote: Enumerating objects: 1715, done. remote: Counting objects: 100% (483/483), done. remote: Compressing objects: 100% (94/94), done. remote: Total 1715 (delta 415), reused 401 (delta 389), pack-reused 1232 Receiving objects: 100% (1715/1715), 5.84 MiB | 5.98 MiB/s, done. Resolving deltas: 100% (1049/1049), done. Cloning into 'redpill-load'... remote: Enumerating objects: 5098, done. remote: Counting objects: 100% (1929/1929), done. remote: Compressing objects: 100% (912/912), done. remote: Total 5098 (delta 1031), reused 1891 (delta 999), pack-reused 3169 Receiving objects: 100% (5098/5098), 125.93 MiB | 9.28 MiB/s, done. Resolving deltas: 100% (2582/2582), done. No extra build option or static specified, using default <static> Using static compiled redpill extension Removing any old redpill.ko modules Looking for redpill for : ds3622xsp_64570 Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpillprod/releases/redpill-broadwellnk-4.4.302.tgz Extracting module Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpillprod/src/check-redpill.sh Got redpill-linux-v4.4.302+.ko Starting loader creation Found tinycore cache folder, linking to home/tc/custom-module Checking user_config.json : Done Entering redpill-load directory Removing bundled exts directories Cache directory OK Found build request for revision greater than 42218 Downloading extractor v2 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 389M 100 389M 0 0 106M 0 0:00:03 0:00:03 --:--:-- 106M OK old pat downloaded !!! Creating temp folder /tmp/pat Checking for cached pat file Found tinycore cache folder, linking to home/tc/custom-module Could not find pat file locally cached Configdir : /home/tc/redpill-load/config/DS3622xs+/7.2.0-64570 Configfile: /home/tc/redpill-load/config/DS3622xs+/7.2.0-64570/config.json Pat URL : https://global.download.synology.com/download/DSM/release/7.2/64570-1/DSM_DS3622xs%2B_64570.pat Downloading pat file from URL : https://global.download.synology.com/download/DSM/release/7.2/64570-1/DSM_DS3622xs%2B_64570.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 390M 100 390M 0 0 94.6M 0 0:00:04 0:00:04 --:--:-- 94.6M File //mnt/sdf3/auxfiles/ds3622xsp_64570.pat, is encrypted File //mnt/sdf3/auxfiles/ds3622xsp_64570.pat, has been cached but its encrypted, re-running decrypting process Checking for cached pat file Found tinycore cache folder, linking to home/tc/custom-module Found locally cached pat file /home/tc/custom-module/ds3622xsp_64570.pat File /home/tc/custom-module/ds3622xsp_64570.pat, is encrypted Extracting encrypted pat file : /home/tc/custom-module/ds3622xsp_64570.pat to /tmp/pat option -f with value `/home/tc/custom-module/ds3622xsp_64570.pat' option -C with value `/tmp/pat' 0 Creating unecrypted pat file ds3622xsp_64570.pat to /home/tc/redpill-load/cache folder VERSION Pat file sha256sum is : 7bdf581843d5553ffdc2f9681257a3ca8f6cddc8d90364646a909fff626cd634 Checking config file existence -> OK Editing config file -> Verifying config file -> OK ! Clearing temp folders Processing add_extensions entries found on /home/tc/custom_config.json file : all-modules eudev disks misc Adding extension "https://github.com/pocopico/tcrp-addons/raw/main/all-modules/rpext-index.json", [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/pocopico/tcrp-addons/raw/main/all-modules/rpext-index.json... [#] Downloading remote file https://github.com/pocopico/tcrp-addons/raw/main/all-modules/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [OK] [#] ========================================== all-modules ========================================== [#] Extension name: all-modules [#] Description: Adds All modules Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/tcrp-addons/tree/main/all-modules [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/tcrp-addons/main/all-modules/rpext-index.json [#] Platforms supported: ds1621p_42218 ds920p_64570 dva3221_42661 ds3615xs_64570 ds3617xs_42218 dva3221_64570 ds920p_42661 fs6400_42661 dva3221_42962 ds1019p_42218 ds918p_42661 fs6400_42218 ds3622xsp_42962 rs3618xs_42962 dva1622_42218 ds920p_42962 ds1621p_42661 ds923p_42962 ds923p_64570 ds3617xs_64570 ds3622xsp_64570 dva3221_42218 ds1621xsp_42661 ds3615xs_42661 fs6400_64570 rs3618xs_64570 ds3622xsp_42661 ds723p_42661 ds2422p_42661 sa6400_42661 ds3622xsp_42218 rs3413xsp_42661 ds723p_42962 ds2422p_42962 fs6400_42962 fs2500_64570 ds1621xsp_64570 dva1622_42962 rs3413xsp_42218 ds1520p_64570 sa6400_42962 ds2422p_42218 fs2500_42962 rs4021xsp_42962 zendofmodel ds3615xs_42962 ds3617xs_42962 ds1621p_64570 rs3618xs_42218 fs2500_42661 sa6400_64570 ds1520p_42218 rs4021xsp_42218 ds723p_42218 dva3219_42962 dva3219_42218 rs4021xsp_64570 ds723p_64570 ds3617xs_42661 ds1621xsp_42962 ds920p_42218 ds918p_42962 rs3618xs_42661 dva1622_42661 ds1520p_42962 ds918p_42218 ds1019p_42962 ds923p_42661 dva3219_42661 ds1621xsp_42218 ds2422p_64570 ds923p_42218 ds918p_64570 dva1622_64570 rs3413xsp_42962 rs3413xsp_64570 ds1019p_64570 ds3615xs_42218 ds1621p_42962 sa6400_42218 dva3219_64570 ds1520p_42661 rs4021xsp_42661 ds1019p_42661 fs2500_42218 [#] ======================================================================================= Adding extension "https://github.com/pocopico/tcrp-addons/raw/main/eudev/rpext-index.json", [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/pocopico/tcrp-addons/raw/main/eudev/rpext-index.json... [#] Downloading remote file https://github.com/pocopico/tcrp-addons/raw/main/eudev/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [OK] [#] ========================================== eudev ========================================== [#] Extension name: Eudev binaries [#] Description: Eudev binaries will assist with auto module loading [#] To get help visit: https://github.com/pocopico/tcrp-addons/main/eudev/ [#] Extension preparer/packer: https://github.com/pocopico/tcrp-addons/main/eudev/ [#] Software author: https://github.com/pocopico/tcrp-addons/main/eudev/ [#] Update URL: https://raw.githubusercontent.com/pocopico/tcrp-addons/main/eudev/rpext-index.json [#] Platforms supported: ds1621p_42218 ds920p_64570 dva3221_42661 ds3615xs_64570 ds3617xs_42218 dva3221_64570 ds920p_42661 fs6400_42661 dva3221_42962 ds1019p_42218 ds918p_42661 fs6400_42218 ds3622xsp_42962 rs3618xs_42962 dva1622_42218 ds920p_42962 ds1621p_42661 ds923p_42962 ds923p_64570 ds3617xs_64570 ds3622xsp_64570 dva3221_42218 ds1621xsp_42661 ds3615xs_42661 fs6400_64570 rs3618xs_64570 ds3622xsp_42661 ds723p_42661 ds2422p_42661 sa6400_42661 ds3622xsp_42218 rs3413xsp_42661 ds723p_42962 ds2422p_42962 fs6400_42962 fs2500_64570 ds1621xsp_64570 dva1622_42962 rs3413xsp_42218 ds1520p_64570 sa6400_42962 ds2422p_42218 fs2500_42962 rs4021xsp_42962 zendofmodel ds3615xs_42962 ds3617xs_42962 ds1621p_64570 rs3618xs_42218 fs2500_42661 sa6400_64570 ds1520p_42218 rs4021xsp_42218 ds723p_42218 dva3219_42962 dva3219_42218 rs4021xsp_64570 ds723p_64570 ds3617xs_42661 ds1621xsp_42962 ds920p_42218 ds918p_42962 rs3618xs_42661 dva1622_42661 ds1520p_42962 ds918p_42218 ds1019p_42962 ds923p_42661 dva3219_42661 ds1621xsp_42218 ds2422p_64570 ds923p_42218 ds918p_64570 dva1622_64570 rs3413xsp_42962 rs3413xsp_64570 ds1019p_64570 ds3615xs_42218 ds1621p_42962 sa6400_42218 dva3219_64570 ds1520p_42661 rs4021xsp_42661 ds1019p_42661 fs2500_42218 [#] ======================================================================================= Adding extension "https://github.com/pocopico/tcrp-addons/raw/main/disks/rpext-index.json", [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/pocopico/tcrp-addons/raw/main/disks/rpext-index.json... [#] Downloading remote file https://github.com/pocopico/tcrp-addons/raw/main/disks/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [OK] [#] ========================================== disks ========================================== [#] Extension name: Disks [#] Description: All in one solution for disk issues [#] To get help visit: https://github.com/pocopico/tcrp-addons/main/disks/ [#] Extension preparer/packer: https://github.com/pocopico/tcrp-addons/main/disks/ [#] Software author: https://github.com/pocopico/tcrp-addons/main/disks/ [#] Update URL: https://raw.githubusercontent.com/pocopico/tcrp-addons/main/disks/rpext-index.json [#] Platforms supported: ds1621p_42218 ds920p_64570 dva3221_42661 ds3615xs_64570 ds3617xs_42218 dva3221_64570 ds920p_42661 fs6400_42661 dva3221_42962 ds1019p_42218 ds918p_42661 fs6400_42218 ds3622xsp_42962 rs3618xs_42962 dva1622_42218 ds920p_42962 ds1621p_42661 ds923p_42962 ds923p_64570 ds3617xs_64570 ds3622xsp_64570 dva3221_42218 ds1621xsp_42661 ds3615xs_42661 fs6400_64570 rs3618xs_64570 ds3622xsp_42661 ds723p_42661 ds2422p_42661 sa6400_42661 ds3622xsp_42218 rs3413xsp_42661 ds723p_42962 ds2422p_42962 fs6400_42962 fs2500_64570 ds1621xsp_64570 dva1622_42962 rs3413xsp_42218 ds1520p_64570 sa6400_42962 ds2422p_42218 fs2500_42962 rs4021xsp_42962 zendofmodel ds3615xs_42962 ds3617xs_42962 ds1621p_64570 rs3618xs_42218 fs2500_42661 sa6400_64570 ds1520p_42218 rs4021xsp_42218 ds723p_42218 dva3219_42962 dva3219_42218 rs4021xsp_64570 ds723p_64570 ds3617xs_42661 ds1621xsp_42962 ds920p_42218 ds918p_42962 rs3618xs_42661 dva1622_42661 ds1520p_42962 ds918p_42218 ds1019p_42962 ds923p_42661 dva3219_42661 ds1621xsp_42218 ds2422p_64570 ds923p_42218 ds918p_64570 dva1622_64570 rs3413xsp_42962 rs3413xsp_64570 ds1019p_64570 ds3615xs_42218 ds1621p_42962 sa6400_42218 dva3219_64570 ds1520p_42661 rs4021xsp_42661 ds1019p_42661 fs2500_42218 [#] ======================================================================================= Adding extension "https://github.com/pocopico/tcrp-addons/raw/main/misc/rpext-index.json" [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/pocopico/tcrp-addons/raw/main/misc/rpext-index.json... [#] Downloading remote file https://github.com/pocopico/tcrp-addons/raw/main/misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [OK] [#] ========================================== misc ========================================== [#] Extension name: Misc shell [#] Description: Misc shell [#] To get help visit: https://raw.githubusercontent.com/pocopico/tcrp-addons/main/misc [#] Extension preparer/packer: https://raw.githubusercontent.com/pocopico/tcrp-addons/main/misc [#] Software author: https://raw.githubusercontent.com/pocopico/tcrp-addons/main/misc [#] Update URL: https://raw.githubusercontent.com/pocopico/tcrp-addons/main/misc/rpext-index.json [#] Platforms supported: ds1621p_42218 ds920p_64570 dva3221_42661 ds3615xs_64570 ds3617xs_42218 dva3221_64570 ds920p_42661 fs6400_42661 dva3221_42962 ds1019p_42218 ds918p_42661 fs6400_42218 ds3622xsp_42962 rs3618xs_42962 dva1622_42218 ds920p_42962 ds1621p_42661 ds923p_42962 ds923p_64570 ds3617xs_64570 ds3622xsp_64570 dva3221_42218 ds1621xsp_42661 ds3615xs_42661 fs6400_64570 rs3618xs_64570 ds3622xsp_42661 ds723p_42661 ds2422p_42661 sa6400_42661 ds3622xsp_42218 rs3413xsp_42661 ds723p_42962 ds2422p_42962 fs6400_42962 fs2500_64570 ds1621xsp_64570 dva1622_42962 rs3413xsp_42218 ds1520p_64570 sa6400_42962 ds2422p_42218 fs2500_42962 rs4021xsp_42962 zendofmodel ds3615xs_42962 ds3617xs_42962 ds1621p_64570 rs3618xs_42218 fs2500_42661 sa6400_64570 ds1520p_42218 rs4021xsp_42218 ds723p_42218 dva3219_42962 dva3219_42218 rs4021xsp_64570 ds723p_64570 ds3617xs_42661 ds1621xsp_42962 ds920p_42218 ds918p_42962 rs3618xs_42661 dva1622_42661 ds1520p_42962 ds918p_42218 ds1019p_42962 ds923p_42661 dva3219_42661 ds1621xsp_42218 ds2422p_64570 ds923p_42218 ds918p_64570 dva1622_64570 rs3413xsp_42962 rs3413xsp_64570 ds1019p_64570 ds3615xs_42218 ds1621p_42962 sa6400_42218 dva3219_64570 ds1520p_42661 rs4021xsp_42661 ds1019p_42661 fs2500_42218 [#] ======================================================================================= Updating extension : all-modules contents for model : ds3622xsp_64570 [#] Checking runtime for required tools... [OK] [#] Updating ds3622xsp_64570 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/all-modules/releases/broadwellnk.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension all-modules platform ds3622xsp_64570 [#] Downloading remote file https://github.com/pocopico/redpill-modules/releases/latest/download/broadwellnk-4.4.180.tgz to /home/tc/redpill-load/custom/extensions/all-modules/ds3622xsp_64570/broadwellnk-4.4.180.tgz ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/all-modules/ds3622xsp_64570/broadwellnk-4.4.180.tgz file... [OK] [#] Downloading remote file https://github.com/pocopico/redpill-modules/releases/latest/download/broadwellnk-4.4.302.tgz to /home/tc/redpill-load/custom/extensions/all-modules/ds3622xsp_64570/broadwellnk-4.4.302.tgz ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/all-modules/ds3622xsp_64570/broadwellnk-4.4.302.tgz file... [OK] [#] Downloading remote file https://github.com/pocopico/redpill-modules/releases/latest/download/firmware.tgz to /home/tc/redpill-load/custom/extensions/all-modules/ds3622xsp_64570/firmware.tgz ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/all-modules/ds3622xsp_64570/firmware.tgz file... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/all-modules/src/install.sh to /home/tc/redpill-load/custom/extensions/all-modules/ds3622xsp_64570/install.sh ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/all-modules/ds3622xsp_64570/install.sh file... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/all-modules/auxfiles/kmod to /home/tc/redpill-load/custom/extensions/all-modules/ds3622xsp_64570/kmod ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/all-modules/ds3622xsp_64570/kmod file... [OK] [#] Successfully processed recipe for extension all-modules platform ds3622xsp_64570 [#] Verifying /home/tc/redpill-load/custom/extensions/all-modules/ds3622xsp_64570/kmod file... [OK] Updating extension : eudev contents for model : ds3622xsp_64570 [#] Checking runtime for required tools... [OK] [#] Updating ds3622xsp_64570 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/eudev/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension eudev platform ds3622xsp_64570 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/master/eudev/releases/eudev-6.2.tgz to /home/tc/redpill-load/custom/extensions/eudev/ds3622xsp_64570/eudev-6.2.tgz ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/eudev/ds3622xsp_64570/eudev-6.2.tgz file... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/master/eudev/releases/eudev-7.1.tgz to /home/tc/redpill-load/custom/extensions/eudev/ds3622xsp_64570/eudev-7.1.tgz ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/eudev/ds3622xsp_64570/eudev-7.1.tgz file... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/master/eudev/releases/eudev-7.2.tgz to /home/tc/redpill-load/custom/extensions/eudev/ds3622xsp_64570/eudev-7.2.tgz ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/eudev/ds3622xsp_64570/eudev-7.2.tgz file... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/master/eudev/releases/install.sh to /home/tc/redpill-load/custom/extensions/eudev/ds3622xsp_64570/install.sh ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/eudev/ds3622xsp_64570/install.sh file... [OK] [#] Successfully processed recipe for extension eudev platform ds3622xsp_64570 [#] Verifying /home/tc/redpill-load/custom/extensions/eudev/ds3622xsp_64570/install.sh file... [OK] Updating extension : disks contents for model : ds3622xsp_64570 [#] Checking runtime for required tools... [OK] [#] Updating ds3622xsp_64570 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/disks/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension disks platform ds3622xsp_64570 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/disks/releases/dtc to /home/tc/redpill-load/custom/extensions/disks/ds3622xsp_64570/dtc ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/disks/ds3622xsp_64570/dtc file... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/disks/releases/install.sh to /home/tc/redpill-load/custom/extensions/disks/ds3622xsp_64570/install.sh ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/disks/ds3622xsp_64570/install.sh file... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/disks/releases/readlink to /home/tc/redpill-load/custom/extensions/disks/ds3622xsp_64570/readlink ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/disks/ds3622xsp_64570/readlink file... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/disks/releases/sed to /home/tc/redpill-load/custom/extensions/disks/ds3622xsp_64570/sed ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/disks/ds3622xsp_64570/sed file... [OK] [#] Successfully processed recipe for extension disks platform ds3622xsp_64570 [#] Verifying /home/tc/redpill-load/custom/extensions/disks/ds3622xsp_64570/sed file... [OK] Updating extension : misc contents for model : ds3622xsp_64570 [#] Checking runtime for required tools... [OK] [#] Updating ds3622xsp_64570 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/misc/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension misc platform ds3622xsp_64570 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/master/misc/releases/install-all.sh to /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/install-all.sh ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/install-all.sh file... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/master/misc/releases/ttyd.tar.gz to /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/ttyd.tar.gz ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/ttyd.tar.gz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/ttyd.tar.gz to /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/master/misc/releases/sed to /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/sed ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/sed file... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/master/misc/releases/install_rd.sh to /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/install_rd.sh ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/install_rd.sh file... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/master/misc/releases/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/lrzsz.tar.gz ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/lrzsz.tar.gz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/master/misc/releases/pciids to /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/pciids ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/pciids file... [OK] [#] Successfully processed recipe for extension misc platform ds3622xsp_64570 [#] Verifying /home/tc/redpill-load/custom/extensions/misc/ds3622xsp_64570/pciids file... [OK] [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/pocopico/tcrp-addons/raw/main/boot-wait/rpext-index.json... [#] Downloading remote file https://github.com/pocopico/tcrp-addons/raw/main/boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [OK] [#] ========================================== boot-wait ========================================== [#] Extension name: RedPill Bootwait [#] Description: Simple extension which stops the execution early waiting for the boot device to appear [#] To get help visit: https://github.com/RedPill-TTG/redpill-boot-wait [#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-boot-wait [#] Software author: https://github.com/pocopico/tcrp-addons/main/disks/ [#] Update URL: https://raw.githubusercontent.com/pocopico/tcrp-addons/main/boot-wait/rpext-index.json [#] Platforms supported: ds1621p_42218 ds920p_64570 dva3221_42661 ds3615xs_64570 ds3617xs_42218 dva3221_64570 ds920p_42661 fs6400_42661 dva3221_42962 ds1019p_42218 ds918p_42661 fs6400_42218 ds3622xsp_42962 rs3618xs_42962 dva1622_42218 ds920p_42962 ds1621p_42661 ds923p_42962 ds923p_64570 ds3617xs_64570 ds3622xsp_64570 dva3221_42218 ds1621xsp_42661 ds3615xs_42661 fs6400_64570 rs3618xs_64570 ds3622xsp_42661 ds723p_42661 ds2422p_42661 sa6400_42661 ds3622xsp_42218 rs3413xsp_42661 ds723p_42962 ds2422p_42962 fs6400_42962 fs2500_64570 ds1621xsp_64570 dva1622_42962 rs3413xsp_42218 ds1520p_64570 sa6400_42962 ds2422p_42218 fs2500_42962 rs4021xsp_42962 zendofmodel ds3615xs_42962 ds3617xs_42962 ds1621p_64570 rs3618xs_42218 fs2500_42661 sa6400_64570 ds1520p_42218 rs4021xsp_42218 ds723p_42218 dva3219_42962 dva3219_42218 rs4021xsp_64570 ds723p_64570 ds3617xs_42661 ds1621xsp_42962 ds920p_42218 ds918p_42962 rs3618xs_42661 dva1622_42661 ds1520p_42962 ds918p_42218 ds1019p_42962 ds923p_42661 dva3219_42661 ds1621xsp_42218 ds2422p_64570 ds923p_42218 ds918p_64570 dva1622_64570 rs3413xsp_42962 rs3413xsp_64570 ds1019p_64570 ds3615xs_42218 ds1621p_42962 sa6400_42218 dva3219_64570 ds1520p_42661 rs4021xsp_42661 ds1019p_42661 fs2500_42218 [#] ======================================================================================= [#] Checking runtime for required tools... [OK] [#] Updating all-modules extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/all-modules/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [#] Extension all-modules index is already up to date [#] Updating boot-wait extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [#] Extension boot-wait index is already up to date [#] Updating disks extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/disks/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [#] Extension disks index is already up to date [#] Updating eudev extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/eudev/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [#] Extension eudev index is already up to date [#] Updating misc extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################### 100.0% [#] Extension misc index is already up to date [#] Updating misc extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds3622xsp_64570 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/all-modules/releases/broadwellnk.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################### 100.0% [#] Extension all-modules for ds3622xsp_64570 platform is already up to date [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/boot-wait/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension boot-wait platform ds3622xsp_64570 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/boot-wait/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/boot-wait/ds3622xsp_64570/boot-wait.sh ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/boot-wait/ds3622xsp_64570/boot-wait.sh file... [OK] [#] Successfully processed recipe for extension boot-wait platform ds3622xsp_64570 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/disks/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################### 100.0% [#] Extension disks for ds3622xsp_64570 platform is already up to date [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/eudev/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################### 100.0% [#] Extension eudev for ds3622xsp_64570 platform is already up to date [#] Downloading remote file https://raw.githubusercontent.com/pocopico/tcrp-addons/main/misc/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json ######################################################################### 100.0% [#] Extension misc for ds3622xsp_64570 platform is already up to date [#] Verifying /home/tc/redpill-load/custom/extensions/boot-wait/ds3622xsp_64570/boot-wait.sh file... [OK] [#] Updating extensions... [OK] [#] Verifying /home/tc/redpill-load/cache/ds3622xsp_64570.pat file... [OK] [#] Unpacking /home/tc/redpill-load/cache/ds3622xsp_64570.pat file to /home/tc/redpill-load/build/1687938332/pat-ds3622xsp_64570-unpacked... [OK] [#] Verifying /home/tc/redpill-load/build/1687938332/pat-ds3622xsp_64570-unpacked/zImage file... [OK] [#] Patching /home/tc/redpill-load/build/1687938332/pat-ds3622xsp_64570-unpacked/zImage to /home/tc/redpill-load/build/1687938332/zImage-patched... [OK] [#] Verifying /home/tc/redpill-load/build/1687938332/pat-ds3622xsp_64570-unpacked/rd.gz file... [OK] [#] Unpacking /home/tc/redpill-load/build/1687938332/pat-ds3622xsp_64570-unpacked/rd.gz file to /home/tc/redpill-load/build/1687938332/rd-ds3622xsp_64570-unpacked... [OK] [#] Apply patches to /home/tc/redpill-load/build/1687938332/rd-ds3622xsp_64570-unpacked... [OK] [#] Patching config files in ramdisk... [OK] [#] Adding OS config patching... [OK] [#] Repacking ramdisk to /home/tc/redpill-load/build/1687938332/rd-patched-ds3622xsp_64570.gz... [OK] [#] Bundling extensions... [#] Checking runtime for required tools... [OK] [#] Dumping ds3622xsp_64570 platform extensions to /home/tc/redpill-load/build/1687938332/custom-initrd/exts... [OK] [#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1687938332/custom.gz... [OK] [#] Generating GRUB config... [OK] [#] Creating loader image at loader.img... [OK] [#] Cleaning up... [OK] Mounting /dev/sdf1 to localdiskp1 Mounting /dev/sdf2 to localdiskp2 Copying custom.gz to sdf3 Bringing over my friend ######################################################################### 100.0% ######################################################################### 100.0% ######################################################################### 100.0% bzImage-friend checksum OK ! initrd-friend checksum OK ! Entries in Localdisk bootloader : ======================================================================= menuentry 'RedPill DS3622xs v7.2.0-64570 (USB, Verbose)' { menuentry 'RedPill DS3622xs v7.2.0-64570 (SATA, Verbose)' { Updated user_config with USB Command Line : withefi earlyprintk syno_hw_version=DS3622xs+ console=ttyS0,115200n8 netif_num=1 pid=0x4030 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac1=001132082970 sn=2150SQRMXKZ5W vid=0x0424 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=5 Updated user_config with SATA Command Line : withefi earlyprintk syno_hw_version=DS3622xs+ console=ttyS0,115200n8 netif_num=1 pid=0x4030 earlycon=uart8250,io,0x3f8,115200n8 synoboot_satadom=1 syno_port_thaw=1 mac1=001132082970 sn=2150SQRMXKZ5W vid=0x0424 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=5 Generating GRUB entries for model :ds3622xsp_64570 in /home/tc Generating default grub.cfg for model generate Generated successfully Added USB entry Added SATA entry Added TCRP entry Added TCRP FRIEND entry cp: cannot create regular file '/home/tc/redpill-load/part1/boot/grub/grub.cfg': Permission denied menuentry 'RedPill DS3622xs+ 7.2.0-64570 (USB, Verbose)' { menuentry 'RedPill DS3622xs+ 7.2.0-64570 (SATA, Verbose)' { menuentry 'Tiny Core Image Build' { menuentry 'Tiny Core Friend' { Copying grub file /home/tc/grub.cfg to /home/tc/redpill-load/localdiskp1/boot/grub/grub.cfg menuentry 'RedPill DS3622xs+ 7.2.0-64570 (USB, Verbose)' { menuentry 'RedPill DS3622xs+ 7.2.0-64570 (SATA, Verbose)' { menuentry 'Tiny Core Image Build' { menuentry 'Tiny Core Friend' { Setting next grub entry Setting next grub entry to Friend : Tiny Core Friend Grub entry has been set to : Tiny Core Friend Ramdisk in not compressed 51766 blocks 42632 blocks 94396 blocks Cleaning up files Caching files for future use No adequate space on TCRP loader partition /mnt/sdf3 to cache pat file Found /mnt/sdf3/auxfiles/ds3622xsp_64570.pat file Removing older cached pat files to cache current Found /home/tc/redpill-load/cache/ds3622xsp_64570.pat, copying to cache directory : /mnt/sdf3/auxfiles Saving user session for future use. Saving current extensions -> OK ! Saving current user_config.json -> OK ! tc@box:~$ ./rploader.sh backup Please make sure you are using the latest 1GB img before using backup option Current /home/tc size is 267M , try to keep it less than 1GB as it might not fit into your image Should i update the sdf with your current files [Yy/Nn] y Backing up home files to sdf : Backing up files to /mnt/sdf3//mydata.tgz Done. tc@box:~$ ./rploader.sh backuploader Backing up current loader Checking backup folder existence The backup folder holds the following backups total 0 Creating backup folder 2023-Jun-28-07-49 Mounting partition 1 Mounting partition 2 Listing backup files : total 27348 -rwxrwxrwx 1 root root 10496913 Jun 28 07:49 partition2.tgz -rwxrwxrwx 1 root root 17505230 Jun 28 07:49 partition1.tgz Partition 1 : 623 files and directories Partition 2 : 12 files and directories DONE tc@box:~$ exitcheck.sh reboot tc@box:~$

I have old tower PC running baremetal DSM 7.x with an SHR storage pool and two volumes. I constantly hear the drives grinding away from where it sits across the room from me, but cannot figure out what is causing this activity. I've tried shutting down every docker container as well as any running package that I am able to stop, still the spinning continues. The noise is a little annoying but not unbearable, but I am mainly concerned with premature drive failure if these drives are constantly reading/writing 24/7. How to I figure out what the culprit is? Task manager doesn't seem to show a level of activity comparable to the constant grind I am hearing.