Search the Community

Bonsoir, Pour retour d'expérience, je viens de migrer aujourd'hui mon HP Gen 7 (N54L) de DSM 5.0.x à DSM 6.0.2 avec le loader de Jun 1.01 sans problème particulier. J'ai suivi le tuto (en anglais). J'ai aussi mis à jour l'Update 11. - Les volumes SHR => OK, - Plusieurs reboot => OK, - Cloud Sync avec Amazon Cloud Drive => OK, - Plex => OK, - BitTorrent Sync => OK, - HA Proxy => Fonctionne mais il doit y avoir des problèmes de compatibilité. L'interface ne fonctionne pas mais le service est up. J'ai bien tenté le loader 1.02a avec DSM 6.1.x mais il n'est pas compatible AMD pour l'instant. Enfin, Docker c'est génial Bonne soirée, Martial

Merci pour votre réponse. J'ai effectivement essayé tous les ports (sauf celui qui se trouve sur la CM), rien y fait. La commande "dmesg | grep Blue" ne me donne rien (je suis novice). Par contre, sous Putty, lorsque je tape uniquement "dmesg", voilà ce que j'obtiens : dmesg log ash-4.3# dmesg | grep Blue ash-4.3# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.77 (root@build1) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #8451 SMP Wed Aug 17 05:12:41 CST 2016 [ 0.000000] Command line: BOOT_IMAGE=/image/DS3615xs/bzImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet root=/dev/md0 sn=5C7528P3K9 mac1=38EAA7A107A9 netif_num=1 vid=0x058f pid=0x6387 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077f8ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077f9e000-0x0000000077f9ffff] type 9 [ 0.000000] BIOS-e820: [mem 0x0000000077fa0000-0x0000000077fadfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000077fae000-0x0000000077fdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000077fe0000-0x0000000077ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: HP ProLiant MicroServer, BIOS O41 07/29/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x77f90 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01abe000, 0x01abefff] PGTABLE [ 0.000000] BRK [0x01abf000, 0x01abffff] PGTABLE [ 0.000000] BRK [0x01ac0000, 0x01ac0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x77c00000-0x77dfffff] [ 0.000000] [mem 0x77c00000-0x77dfffff] page 2M [ 0.000000] BRK [0x01ac1000, 0x01ac1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x74000000-0x77bfffff] [ 0.000000] [mem 0x74000000-0x77bfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x73ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x73ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x77e00000-0x77f8ffff] [ 0.000000] [mem 0x77e00000-0x77f8ffff] page 4k [ 0.000000] BRK [0x01ac2000, 0x01ac2fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x36eb4000-0x37751fff] [ 0.000000] ACPI: RSDP 00000000000f8f50 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 0000000077fa0100 0007C (v01 HP ProLiant 20110729 HP 00000097) [ 0.000000] ACPI: FACP 0000000077fa0290 000F4 (v03 HP ProLiant 20110729 HP 00000097) [ 0.000000] ACPI: DSDT 0000000077fa0620 06947 (v01 HP ProLiant 00000006 INTL 20051117) [ 0.000000] ACPI: FACS 0000000077fae000 00040 [ 0.000000] ACPI: APIC 0000000077fa0390 00072 (v01 HP ProLiant 20110729 HP 00000097) [ 0.000000] ACPI: MCFG 0000000077fa0410 0003C (v01 HP ProLiant 20110729 HP 00000097) [ 0.000000] ACPI: SPMI 0000000077fa0450 00041 (v05 HP ProLiant 20110729 HP 00000097) [ 0.000000] ACPI: OEMB 0000000077fae040 00072 (v01 HP ProLiant 20110729 HP 00000097) [ 0.000000] ACPI: HPET 0000000077fab4e0 00038 (v01 HP ProLiant 20110729 HP 00000097) [ 0.000000] ACPI: EINJ 0000000077fab520 00130 (v01 AMIER AMI_EINJ 20110729 HP 00000097) [ 0.000000] ACPI: BERT 0000000077fab6b0 00030 (v01 AMIER AMI_BERT 20110729 HP 00000097) [ 0.000000] ACPI: ERST 0000000077fab6e0 001B0 (v01 AMIER AMI_ERST 20110729 HP 00000097) [ 0.000000] ACPI: HEST 0000000077fab890 000A8 (v01 AMIER ABC_HEST 20110729 HP 00000097) [ 0.000000] ACPI: SSDT 0000000077fab940 0052A (v01 HP ProLiant 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880075800000-ffff8800773fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x77f8ffff] [ 0.000000] On node 0 totalpages: 491309 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6663 pages used for memmap [ 0.000000] DMA32 zone: 487312 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000 [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000 [ 0.000000] e820: [mem 0x78000000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff880077c00000 s70144 r8192 d24064 u524288 [ 0.000000] pcpu-alloc: s70144 r8192 d24064 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 484569 [ 0.000000] Kernel command line: BOOT_IMAGE=/image/DS3615xs/bzImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet root=/dev/md0 sn=5C7528P3K9 mac1=38EAA7A107A9 netif_num=1 vid=0x058f pid=0x6387 [ 0.000000] Power on seq num: 0 [ 0.000000] Synology Hardware Version: DS3615xs-j [ 0.000000] Vender format version: 2 [ 0.000000] Serial Number: ********** [ 0.000000] Mac1: ************ [ 0.000000] Internal netif num: 1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 1913056k/1965632k available (4791k kernel code, 396k absent, 52180k reserved, 3814k data, 760k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 7864320 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2196.304 MHz processor [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4392.60 BogoMIPS (lpj=2196304) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000046] Security Framework initialized [ 0.000057] AppArmor: AppArmor initialized [ 0.000070] Mount-cache hash table entries: 256 [ 0.000326] Initializing cgroup subsys memory [ 0.000349] Initializing cgroup subsys devices [ 0.000352] Initializing cgroup subsys freezer [ 0.000355] Initializing cgroup subsys blkio [ 0.000391] tseg: 0000000000 [ 0.000400] CPU: Physical Processor ID: 0 [ 0.000401] CPU: Processor Core ID: 0 [ 0.000404] mce: CPU supports 6 MCE banks [ 0.000412] process: using AMD E400 aware idle routine [ 0.000414] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 tlb_flushall_shift: 4 [ 0.000511] Freeing SMP alternatives: 24k freed [ 0.000531] ACPI: Core revision 20130328 [ 0.002659] ACPI: All ACPI Tables successfully acquired [ 0.004860] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.014862] smpboot: CPU0: AMD Turion(tm) II Neo N54L Dual-Core Processor (fam: 10, model: 06, stepping: 03) [ 0.116748] Performance Events: (null) PMU driver. [ 0.116751] ... version: 0 [ 0.116752] ... bit width: 0 [ 0.116753] ... generic registers: 0 [ 0.116754] ... value mask: 0000000000000000 [ 0.116755] ... max period: 0000000000000000 [ 0.116756] ... fixed-purpose events: 0 [ 0.116757] ... event mask: 0000000000000000 [ 0.116907] NMI watchdog: disabled (cpu0): unable to create perf event: -19 [ 0.117237] smpboot: Booting Node 0, Processors #1 [ 0.130379] Brought up 2 CPUs [ 0.130382] smpboot: Total of 2 processors activated (8785.21 BogoMIPS) [ 0.130401] process: System has AMD C1E enabled [ 0.130415] process: Switch to broadcast mode on CPU1 [ 0.131020] process: Switch to broadcast mode on CPU0 [ 0.131576] devtmpfs: initialized [ 0.131904] PM: Registering ACPI NVS region [mem 0x77fae000-0x77fdffff] (204800 bytes) [ 0.132077] xor: measuring software checksum speed [ 0.141423] prefetch64-sse: 9048.000 MB/sec [ 0.151417] generic_sse: 8588.000 MB/sec [ 0.151419] xor: using function: prefetch64-sse (9048.000 MB/sec) [ 0.151482] NET: Registered protocol family 16 [ 0.152051] ACPI: bus type PCI registered [ 0.152257] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.152262] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.152574] PCI: Using configuration type 1 for base access [ 0.157106] bio: create slab at 0 [ 0.173421] raid6: sse2x1 gen() 2660 MB/s [ 0.190411] raid6: sse2x1 xor() 3087 MB/s [ 0.207403] raid6: sse2x2 gen() 4953 MB/s [ 0.224388] raid6: sse2x2 xor() 5005 MB/s [ 0.241386] raid6: sse2x4 gen() 4585 MB/s [ 0.258376] raid6: sse2x4 xor() 3121 MB/s [ 0.258378] raid6: using algorithm sse2x2 gen() (4953 MB/s) [ 0.258379] raid6: .... xor() 5005 MB/s, rmw enabled [ 0.258381] raid6: using intx1 recovery algorithm [ 0.258400] ACPI: Added _OSI(Module Device) [ 0.258402] ACPI: Added _OSI(Processor Device) [ 0.258403] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.258405] ACPI: Added _OSI(Processor Aggregator Device) [ 0.259021] ACPI: EC: Look up EC in DSDT [ 0.259712] ACPI: Executed 2 blocks of module-level executable AML code [ 0.261488] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.265539] ACPI: OEMN 0000000077faaeb0 00624 (v01 AMD NAHP 00000001 INTL 20051117) [ 0.265733] ACPI: Dynamic OEM Table Load: [ 0.265736] ACPI: OEMN (null) 00624 (v01 AMD NAHP 00000001 INTL 20051117) [ 0.269514] \_SB_:_OSC evaluation returned wrong type [ 0.269519] _OSC request data:1 6 [ 0.269667] ACPI: Interpreter enabled [ 0.269680] ACPI: (supports S0 S4 S5) [ 0.269682] ACPI: Using IOAPIC for interrupt routing [ 0.269925] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.269991] ACPI: No dock devices found. [ 0.278107] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.278641] acpi PNP0A08:00: host bridge window expanded to [mem 0x78000000-0xdfffffff]; [mem 0x78000000-0xdfffffff] ignored [ 0.278645] acpi PNP0A08:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xf0000000-0xffffffff] ignored [ 0.278650] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf000-0x000d19ff]) [ 0.278735] PCI host bridge to bus 0000:00 [ 0.278739] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.278741] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.278743] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.278745] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.278747] pci_bus 0000:00: root bus resource [mem 0x78000000-0xdfffffff] [ 0.278749] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff] [ 0.278762] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.278932] pci 0000:00:01.0: [103c:9602] type 01 class 0x060400 [ 0.279081] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 [ 0.279116] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.279165] pci 0000:00:06.0: System wakeup disabled by ACPI [ 0.279274] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.279295] pci 0000:00:11.0: reg 10: [io 0xd000-0xd007] [ 0.279304] pci 0000:00:11.0: reg 14: [io 0xc000-0xc003] [ 0.279314] pci 0000:00:11.0: reg 18: [io 0xb000-0xb007] [ 0.279323] pci 0000:00:11.0: reg 1c: [io 0xa000-0xa003] [ 0.279332] pci 0000:00:11.0: reg 20: [io 0x9000-0x900f] [ 0.279341] pci 0000:00:11.0: reg 24: [mem 0xfe6ffc00-0xfe6fffff] [ 0.279563] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.279579] pci 0000:00:12.0: reg 10: [mem 0xfe6fe000-0xfe6fefff] [ 0.279773] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.279791] pci 0000:00:12.2: reg 10: [mem 0xfe6ff800-0xfe6ff8ff] [ 0.279869] pci 0000:00:12.2: supports D1 D2 [ 0.279871] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.280008] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.280021] pci 0000:00:13.0: reg 10: [mem 0xfe6fd000-0xfe6fdfff] [ 0.280199] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.280217] pci 0000:00:13.2: reg 10: [mem 0xfe6ff400-0xfe6ff4ff] [ 0.280294] pci 0000:00:13.2: supports D1 D2 [ 0.280296] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.280449] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.280631] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.280644] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.280653] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.280662] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.280672] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.280681] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.280826] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.281006] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.281080] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.281198] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.281213] pci 0000:00:16.0: reg 10: [mem 0xfe6fc000-0xfe6fcfff] [ 0.281426] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.281444] pci 0000:00:16.2: reg 10: [mem 0xfe6ff000-0xfe6ff0ff] [ 0.281522] pci 0000:00:16.2: supports D1 D2 [ 0.281524] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.281660] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.281783] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.281900] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.282019] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.282141] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.282413] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000 [ 0.282423] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 0.282428] pci 0000:01:05.0: reg 14: [io 0xe000-0xe0ff] [ 0.282433] pci 0000:01:05.0: reg 18: [mem 0xfe8f0000-0xfe8fffff] [ 0.282443] pci 0000:01:05.0: reg 24: [mem 0xfe700000-0xfe7fffff] [ 0.282462] pci 0000:01:05.0: supports D1 D2 [ 0.282611] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.282618] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.282621] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff] [ 0.282625] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.282775] pci 0000:02:00.0: [14e4:165b] type 00 class 0x020000 [ 0.282797] pci 0000:02:00.0: reg 10: [mem 0xfe9f0000-0xfe9fffff 64bit] [ 0.282897] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.284417] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.284428] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.284595] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.284605] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.284607] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.284610] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.284612] pci 0000:00:14.4: bridge window [mem 0x78000000-0xdfffffff] (subtractive decode) [ 0.284614] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 0.284626] pci_bus 0000:00: on NUMA node 0 [ 0.284753] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.284917] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted [ 0.285172] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 0.285238] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 0.285303] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 0.285377] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0 [ 0.285428] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 0.285468] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 [ 0.285509] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 0.285549] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 0.285711] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.285717] acpi root: \_SB_.PCI0 notify handler is installed [ 0.285746] Found 1 acpi root devices [ 0.285961] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.285963] vgaarb: loaded [ 0.285964] vgaarb: bridge control possible 0000:01:05.0 [ 0.286107] SCSI subsystem initialized [ 0.286109] ACPI: bus type ATA registered [ 0.286264] libata version 3.00 loaded. [ 0.286424] pps_core: LinuxPPS API ver. 1 registered [ 0.286425] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.286453] PTP clock support registered [ 0.286558] PCI: Using ACPI for IRQ routing [ 0.295138] PCI: pci_cache_line_size set to 64 bytes [ 0.295188] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.295190] e820: reserve RAM buffer [mem 0x77f90000-0x77ffffff] [ 0.295540] Switching to clocksource hpet [ 0.296247] AppArmor: AppArmor Filesystem Enabled [ 0.296370] pnp: PnP ACPI init [ 0.296383] ACPI: bus type PNP registered [ 0.296643] system 00:00: [mem 0x78000000-0x7fffffff] has been reserved [ 0.296647] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.296700] pnp 00:01: [dma 4] [ 0.296822] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.297575] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.297659] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.297746] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.297857] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.298037] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.298040] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.298043] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.298337] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.298340] system 00:07: [io 0x040b] has been reserved [ 0.298343] system 00:07: [io 0x04d6] has been reserved [ 0.298345] system 00:07: [io 0x0c00-0x0c01] has been reserved [ 0.298347] system 00:07: [io 0x0c14] has been reserved [ 0.298349] system 00:07: [io 0x0c50-0x0c51] has been reserved [ 0.298351] system 00:07: [io 0x0c52] has been reserved [ 0.298353] system 00:07: [io 0x0c6c] has been reserved [ 0.298355] system 00:07: [io 0x0c6f] has been reserved [ 0.298357] system 00:07: [io 0x0cd0-0x0cd1] has been reserved [ 0.298359] system 00:07: [io 0x0cd2-0x0cd3] has been reserved [ 0.298362] system 00:07: [io 0x0cd4-0x0cd5] has been reserved [ 0.298364] system 00:07: [io 0x0cd6-0x0cd7] has been reserved [ 0.298366] system 00:07: [io 0x0cd8-0x0cdf] has been reserved [ 0.298368] system 00:07: [io 0x0800-0x089f] has been reserved [ 0.298370] system 00:07: [io 0x0b00-0x0b1f] has been reserved [ 0.298372] system 00:07: [io 0x0b20-0x0b3f] has been reserved [ 0.298374] system 00:07: [io 0x0900-0x090f] has been reserved [ 0.298376] system 00:07: [io 0x0910-0x091f] has been reserved [ 0.298379] system 00:07: [io 0xfe00-0xfefe] has been reserved [ 0.298382] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.298384] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.298386] system 00:07: [mem 0xfed80000-0xfed80fff] has been reserved [ 0.298389] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.298558] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.298560] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.298758] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.298761] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.298763] system 00:09: [mem 0x00100000-0x77ffffff] could not be reserved [ 0.298766] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.298768] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.298858] pnp: PnP ACPI: found 10 devices [ 0.298860] ACPI: bus type PNP unregistered [ 0.309919] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.309924] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.309928] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff] [ 0.309931] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.309935] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.309938] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.309942] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.310091] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.310093] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.310095] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.310097] pci_bus 0000:00: resource 7 [mem 0x78000000-0xdfffffff] [ 0.310099] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xffffffff] [ 0.310101] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.310103] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe8fffff] [ 0.310105] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.310108] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.310110] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.310112] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.310114] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.310116] pci_bus 0000:03: resource 7 [mem 0x78000000-0xdfffffff] [ 0.310118] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xffffffff] [ 0.310185] NET: Registered protocol family 2 [ 0.310399] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.310506] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.310609] TCP: Hash tables configured (established 16384 bind 16384) [ 0.310661] TCP: reno registered [ 0.310664] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.310679] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.310758] NET: Registered protocol family 1 [ 0.310913] RPC: Registered named UNIX socket transport module. [ 0.310918] RPC: Registered udp transport module. [ 0.310920] RPC: Registered tcp transport module. [ 0.310921] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.310929] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 1.267089] pci 0000:01:05.0: Boot video device [ 1.267097] PCI: CLS 64 bytes, default 64 [ 1.267146] Trying to unpack rootfs image as initramfs... [ 3.294091] Freeing initrd memory: 8824k freed [ 3.311808] LVT offset 1 assigned for vector 0x400 [ 3.311823] IBS: LVT offset 1 assigned [ 3.325933] audit: initializing netlink socket (disabled) [ 3.325950] type=2000 audit(1492680269.223:1): initialized [ 3.329768] ------------[ cut here ]------------ [ 3.329779] WARNING: at fs/sysfs/group.c:72 internal_create_group+0x210/0x220() [ 3.329781] sysfs: attrs not set by subsystem for group: cpu/ [ 3.329783] Modules linked in: el000(O) [ 3.329788] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G O 3.10.77 #8451 [ 3.329790] Hardware name: HP ProLiant MicroServer, BIOS O41 07/29/2011 [ 3.329792] ffffffff814a460c ffffffff81033656 0000000000000001 ffff880074827e00 [ 3.329796] ffffffff81815090 ffffffff81814d00 0000000000000000 ffffffff810336b7 [ 3.329798] ffffffff816fefa0 0000000000000028 ffff880074827e10 ffff880074827dd0 [ 3.329801] Call Trace: [ 3.329806] [] ? dump_stack+0xc/0x15 [ 3.329809] [] ? warn_slowpath_common+0x56/0x70 [ 3.329812] [] ? warn_slowpath_fmt+0x47/0x50 [ 3.329815] [] ? internal_create_group+0x210/0x220 [ 3.329820] [] ? device_add_groups+0x38/0x90 [ 3.329823] [] ? device_add+0x4c3/0x6a0 [ 3.329828] [] ? pmu_dev_alloc+0x87/0xc0 [ 3.329831] [] ? perf_event_sysfs_init+0x45/0x8a [ 3.329834] [] ? irq_work_init_cpu_notifier+0x24/0x24 [ 3.329837] [] ? do_one_initcall+0xea/0x140 [ 3.329841] [] ? kernel_init_freeable+0x13a/0x1bb [ 3.329844] [] ? rest_init+0x70/0x70 [ 3.329846] [] ? kernel_init+0x5/0x180 [ 3.329850] [] ? ret_from_fork+0x58/0x90 [ 3.329852] [] ? rest_init+0x70/0x70 [ 3.329858] ---[ end trace bfd58daaf05b7ffd ]--- [ 3.331819] ------------[ cut here ]------------ [ 3.331829] WARNING: at kernel/events/core.c:7709 perf_event_sysfs_init+0x6a/0x8a() [ 3.331831] Failed to register pmu: cpu, reason -22 [ 3.331832] Modules linked in: el000(O) [ 3.331837] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W O 3.10.77 #8451 [ 3.331838] Hardware name: HP ProLiant MicroServer, BIOS O41 07/29/2011 [ 3.331840] ffffffff814a460c ffffffff81033656 ffffffff818150c0 ffff880074827ee0 [ 3.331843] 0000000000000000 0000000000000000 0000000000000000 ffffffff810336b7 [ 3.331845] ffffffff816f4fc8 ffffffff00000028 ffff880074827ef0 ffff880074827eb0 [ 3.331848] Call Trace: [ 3.331852] [] ? dump_stack+0xc/0x15 [ 3.331855] [] ? warn_slowpath_common+0x56/0x70 [ 3.331858] [] ? warn_slowpath_fmt+0x47/0x50 [ 3.331861] [] ? perf_event_sysfs_init+0x6a/0x8a [ 3.331864] [] ? irq_work_init_cpu_notifier+0x24/0x24 [ 3.331866] [] ? do_one_initcall+0xea/0x140 [ 3.331870] [] ? kernel_init_freeable+0x13a/0x1bb [ 3.331872] [] ? rest_init+0x70/0x70 [ 3.331875] [] ? kernel_init+0x5/0x180 [ 3.331878] [] ? ret_from_fork+0x58/0x90 [ 3.331880] [] ? rest_init+0x70/0x70 [ 3.331882] ---[ end trace bfd58daaf05b7ffe ]--- [ 3.336711] bounce pool size: 64 pages [ 3.336720] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.339248] VFS: Disk quotas dquot_6.5.2 [ 3.339279] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.340522] NFS: Registering the id_resolver key type [ 3.340537] Key type id_resolver registered [ 3.340538] Key type id_legacy registered [ 3.340552] msgmni has been set to 3753 [ 3.340728] async_tx: api initialized (async) [ 3.340819] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.340822] io scheduler noop registered [ 3.340823] io scheduler deadline registered [ 3.340830] io scheduler cfq registered (default) [ 3.341373] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X [ 4.313252] tsc: Refined TSC clocksource calibration: 2196.341 MHz [ 4.313261] Switching to clocksource tsc [ 4.351925] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.355419] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250 [ 4.461018] brd: module loaded [ 4.472927] Loading iSCSI transport class v2.0-870. [ 4.509467] rdac: device handler registered [ 4.516546] ahci 0000:00:11.0: version 3.0 [ 4.516781] ahci 0000:00:11.0: irq 41 for MSI/MSI-X [ 4.516885] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 4.516890] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 4.540670] scsi0 : ahci [ 4.544739] scsi1 : ahci [ 4.549514] scsi2 : ahci [ 4.552648] scsi3 : ahci [ 4.554948] ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 41 [ 4.554955] ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 41 [ 4.554958] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 41 [ 4.554961] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 41 [ 4.573535] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 5.344739] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.344767] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.345307] ata1.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133 [ 5.345312] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 5.346070] ata3.00: ATA-8: WDC WD2503ABYX-01WERA1, 01.01S02, max UDMA/133 [ 5.346075] ata3.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 5.346744] ata1.00: configured for UDMA/133 [ 5.346866] ata3.00: configured for UDMA/133 [ 5.347286] scsi 0:0:0:0: Direct-Access WDC WD30EFRX-68AX9N0 80.0 PQ: 0 ANSI: 5 [ 5.347707] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.347729] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.348265] ata4.00: failed to enable AA (error_mask=0x1) [ 5.348463] ata4.00: ATA-8: VB0250EAVER, HPG9, max UDMA/100 [ 5.348465] ata4.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.349119] ata2.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133 [ 5.349121] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 5.349196] ata4.00: failed to enable AA (error_mask=0x1) [ 5.349393] ata4.00: configured for UDMA/100 [ 5.349692] ata2.00: configured for UDMA/133 [ 5.350273] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 5.350276] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 5.350307] sd 0:0:0:0: [sda] Write Protect is off [ 5.350310] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.350324] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.603153] i8042: No controller found [ 5.603316] rtc_cmos 00:02: RTC can wake from S4 [ 5.604328] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 5.604365] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 5.605462] scsi 1:0:0:0: Direct-Access WDC WD30EFRX-68AX9N0 80.0 PQ: 0 ANSI: 5 [ 5.605934] i2c /dev entries driver [ 5.609096] md: linear personality registered for level -1 [ 5.609102] md: raid0 personality registered for level 0 [ 5.609104] md: raid1 personality registered for level 1 [ 5.609105] md: raid10 personality registered for level 10 [ 5.614125] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 5.614131] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 5.614162] sd 1:0:0:0: [sdb] Write Protect is off [ 5.614165] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.614179] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.615878] md: raid6 personality registered for level 6 [ 5.615882] md: raid5 personality registered for level 5 [ 5.615884] md: raid4 personality registered for level 4 [ 5.622999] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 5.623006] cpuidle: using governor ladder [ 5.623007] cpuidle: using governor menu [ 5.623112] TCP: cubic registered [ 5.623115] NET: Registered protocol family 17 [ 5.623148] Key type dns_resolver registered [ 5.625674] scsi 2:0:0:0: Direct-Access WDC WD2503ABYX-01WERA1 01.0 PQ: 0 ANSI: 5 [ 5.636676] sd 2:0:0:0: [sdc] 490350672 512-byte logical blocks: (251 GB/233 GiB) [ 5.636712] sd 2:0:0:0: [sdc] Write Protect is off [ 5.636716] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.636730] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.645560] scsi 3:0:0:0: Direct-Access ATA VB0250EAVER HPG9 PQ: 0 ANSI: 5 [ 5.652738] sda: sda1 sda2 sda5 [ 5.656948] sd 3:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 5.656983] sd 3:0:0:0: [sdd] Write Protect is off [ 5.656986] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 5.657000] sd 3:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.658091] sdc: sdc1 sdc2 sdc3 < sdc5 > [ 5.674960] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.678321] sdb: sdb1 sdb2 sdb5 [ 5.690593] sd 2:0:0:0: [sdc] Attached SCSI disk [ 5.691934] sdd: sdd1 sdd2 sdd3 < sdd5 > [ 5.712099] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.726815] sd 3:0:0:0: [sdd] Attached SCSI disk [ 5.726854] registered taskstats version 1 [ 5.733342] rtc_cmos 00:02: setting system clock to 2017-04-20 09:24:32 UTC (1492680272) [ 5.733385] ip_auto_config address is reused for AMD CPU support [ 5.733523] keep initmem for overlay use [ 5.733525] Write protecting the kernel read-only data: 8192k [ 5.736843] Freeing unused kernel memory: 1344k freed [ 5.738529] Freeing unused kernel memory: 508k freed [ 5.846208] ACPI: bus type USB registered [ 5.846947] usbcore: registered new interface driver usbfs [ 5.847642] usbcore: registered new interface driver hub [ 5.849550] usbcore: registered new interface driver ethub [ 5.852558] usbcore: registered new device driver usb [ 5.867961] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.876103] ehci-pci: EHCI PCI platform driver [ 5.876292] ehci-pci 0000:00:12.2: EHCI Host Controller [ 5.876301] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 5.876310] QUIRK: Enable AMD PLL fix [ 5.876313] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 5.876325] ehci-pci 0000:00:12.2: debug port 1 [ 5.876365] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe6ff800 [ 5.881518] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 5.881964] hub 1-0:1.0: USB hub found [ 5.881971] hub 1-0:1.0: 5 ports detected [ 5.882199] ehci-pci 0000:00:13.2: EHCI Host Controller [ 5.882205] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 5.882210] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 5.882222] ehci-pci 0000:00:13.2: debug port 1 [ 5.882252] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe6ff400 [ 5.887475] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 5.888395] hub 2-0:1.0: USB hub found [ 5.888403] hub 2-0:1.0: 5 ports detected [ 5.888723] ehci-pci 0000:00:16.2: EHCI Host Controller [ 5.888731] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 5.888736] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 5.888749] ehci-pci 0000:00:16.2: debug port 1 [ 5.888785] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe6ff000 [ 5.894463] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 5.897205] hub 3-0:1.0: USB hub found [ 5.897220] hub 3-0:1.0: 4 ports detected [ 5.922494] uhci_hcd: USB Universal Host Controller Interface driver [ 5.975460] usbcore: registered new interface driver usb-storage [ 6.004778] VMware PVSCSI driver - version 1.0.2.0-k [ 6.016720] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 6.028135] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 6.064582] Fusion MPT base driver 3.04.20 [ 6.064588] Copyright (c) 1999-2008 LSI Corporation [ 6.081265] Fusion MPT SPI Host driver 3.04.20 [ 6.092173] Fusion MPT SAS Host driver 3.04.20 [ 6.103688] Fusion MPT misc device (ioctl) driver 3.04.20 [ 6.103857] mptctl: Registered with Fusion MPT base driver [ 6.103859] mptctl: /dev/mptctl @ (major,minor=10,220) [ 6.126488] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013 [ 6.138783] mpt2sas version 20.00.00.00 loaded [ 6.153095] mpt3sas version 01.100.01.00 loaded [ 6.163969] bromolow_synobios: module license 'Synology Inc.' taints kernel. [ 6.163974] Disabling lock debugging due to kernel taint [ 6.164517] 2017-4-20 9:24:32 UTC [ 6.164521] synobios: load, major number 201 [ 6.164525] Brand: Synology [ 6.164527] Model: DS-3615xs [ 6.164529] set group disks wakeup number to 4, spinup time deno 7 [ 6.498218] usb 1-5: new high-speed USB device number 3 using ehci-pci [ 6.665137] synobios cpu_arch proc entry initialized [ 6.665146] synobios crypto_hw proc entry initialized [ 6.665149] synobios syno_platform proc entry initialized [ 6.677175] synobios: unload [ 6.687172] md: Autodetecting RAID arrays. [ 6.730323] md: invalid raid superblock magic on sda5 [ 6.730506] md: sda5 does not have a valid v0.90 superblock, not importing! [ 6.736796] usb-storage 1-5:1.0: USB Mass Storage device detected [ 6.737810] scsi4 : usb-storage 1-5:1.0 [ 6.804763] md: invalid raid superblock magic on sdb5 [ 6.804945] md: sdb5 does not have a valid v0.90 superblock, not importing! [ 6.830818] md: invalid raid superblock magic on sdc5 [ 6.831008] md: sdc5 does not have a valid v0.90 superblock, not importing! [ 6.869709] md: invalid raid superblock magic on sdd5 [ 6.869891] md: sdd5 does not have a valid v0.90 superblock, not importing! [ 6.869907] md: Scanned 12 and added 8 devices. [ 6.869908] md: autorun ... [ 6.869910] md: considering sda1 ... [ 6.869917] md: adding sda1 ... [ 6.869920] md: sda2 has different UUID to sda1 [ 6.869924] md: adding sdb1 ... [ 6.869945] md: sdb2 has different UUID to sda1 [ 6.869950] md: adding sdc1 ... [ 6.869953] md: sdc2 has different UUID to sda1 [ 6.869957] md: adding sdd1 ... [ 6.869960] md: sdd2 has different UUID to sda1 [ 6.869972] md: created md0 [ 6.869973] md: bind [ 6.869990] md: bind [ 6.869998] md: bind [ 6.870007] md: bind [ 6.870015] md: running: [ 6.870334] md/raid1:md0: active with 4 out of 12 mirrors [ 6.870361] md0: detected capacity change from 0 to 2549940224 [ 6.870556] md: considering sda2 ... [ 6.870570] md: adding sda2 ... [ 6.870574] md: adding sdb2 ... [ 6.870578] md: adding sdc2 ... [ 6.870582] md: adding sdd2 ... [ 6.871388] md: created md1 [ 6.871390] md: bind [ 6.871399] md: bind [ 6.871409] md: bind [ 6.871417] md: bind [ 6.871425] md: running: [ 6.875495] md/raid1:md1: active with 4 out of 12 mirrors [ 6.875528] md1: detected capacity change from 0 to 2147418112 [ 6.876584] md: ... autorun DONE. [ 6.936032] md0: unknown partition table [ 7.745142] scsi 4:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [ 7.748233] sd 4:0:0:0: [synoboot] 4028416 512-byte logical blocks: (2.06 GB/1.92 GiB) [ 7.749356] sd 4:0:0:0: [synoboot] Write Protect is off [ 7.749363] sd 4:0:0:0: [synoboot] Mode Sense: 23 00 00 00 [ 7.750482] sd 4:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 7.958415] synoboot: synoboot1 synoboot2 synoboot3 [ 7.967337] sd 4:0:0:0: [synoboot] Attached SCSI removable disk [ 8.103415] EXT4-fs (md0): barriers disabled [ 8.124385] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [ 12.422217] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 14.211594] EXT4-fs (md0): re-mounted. Opts: (null) [ 19.654865] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 19.654925] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 19.654980] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 19.655035] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 19.655089] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 19.964296] md1: unknown partition table [ 20.121770] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k [ 20.460733] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 20.461645] zram: Created 2 device(s) ... [ 20.485725] Adding 577532k swap on /dev/zram0. Priority:1 extents:1 across:577532k SS [ 20.497828] Adding 577532k swap on /dev/zram1. Priority:1 extents:1 across:577532k SS [ 22.233261] NET: Registered protocol family 10 [ 22.275842] sit: IPv6 over IPv4 tunneling driver [ 22.489373] init: syno-auth-check main process (5168) killed by TERM signal [ 22.721016] ACPI: processor limited to max C-state 1 [ 22.781264] acpi-cpufreq: overriding BIOS provided _PSD data [ 23.297124] fuse init (API version 7.22) [ 23.311564] dca service started, version 1.12.1 [ 23.318162] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.5-NAPI [ 23.318166] e1000e: Copyright(c) 1999 - 2016 Intel Corporation. [ 23.330437] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.4 [ 23.330442] Copyright (c) 2007-2015 Intel Corporation. [ 23.348994] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.4.6 [ 23.348998] Copyright(c) 1999 - 2016 Intel Corporation. [ 23.368588] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.3.47 [ 23.368592] i40e: Copyright (c) 2013 - 2015 Intel Corporation. [ 23.395904] tn40xx: Tehuti Network Driver, 0.3.6.11.2 [ 23.407593] Loading modules backported from Linux version v3.18.1-0-g39ca484 [ 23.407597] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c [ 23.460246] Compat-mlnx-ofed backport release: b558788 [ 23.460255] Backport based on mlnx_ofed/mlnx_rdma.git b558788 [ 23.460256] compat.git: mlnx_ofed/mlnx_rdma.git [ 23.615625] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.714.0 ($DateTime: 2016/08/25 21:13:29 $) [ 23.709152] bio: create slab at 1 [ 23.709334] Btrfs loaded [ 23.767457] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 23.779628] sky2: driver version 1.30 [ 23.791751] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01 [ 23.804562] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42 [ 23.816745] QLogic/NetXen Network Driver v4.0.80 [ 23.823288] Solarflare NET driver v3.2 [ 23.829735] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 23.829740] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 23.835710] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 23.841795] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI [ 23.861125] cnic: QLogic cnic Driver v2.5.20n (July 28, 2016) [ 23.896058] tg3.c:v3.137h (Dec 20, 2014) [ 23.940177] pcieport 0000:00:06.0: eth0: Tigon3 [partno(BCM95723) rev 5784100] (PCI Express) MAC address 38:ea:a7:a1:07:a9 [ 23.940183] pcieport 0000:00:06.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 23.940186] pcieport 0000:00:06.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 23.940188] pcieport 0000:00:06.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 23.953582] usbcore: registered new interface driver ax88179_178a [ 23.959643] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 23.959650] ACPI: Power Button [PWRB] [ 23.959718] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 23.959720] ACPI: Power Button [PWRF] [ 24.027152] 2017-4-20 9:24:50 UTC [ 24.027158] synobios: load, major number 201 [ 24.027162] Brand: Synology [ 24.027164] Model: DS-3615xs [ 24.027166] set group disks wakeup number to 4, spinup time deno 7 [ 24.275677] systemd-udevd[5894]: starting version 204 [ 24.527260] synobios cpu_arch proc entry initialized [ 24.527267] synobios crypto_hw proc entry initialized [ 24.527270] synobios syno_platform proc entry initialized [ 26.365021] tg3 0000:02:00.0: irq 42 for MSI/MSI-X [ 27.140043] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.738340] pcieport 0000:00:06.0: eth0: Link is up at 100 Mbps, full duplex [ 28.738347] pcieport 0000:00:06.0: eth0: Flow control is off for TX and off for RX [ 28.738372] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 28.914140] md: md3 stopped. [ 28.916376] md: md4 stopped. [ 28.927222] md: md2 stopped. [ 28.966608] md: bind [ 28.966659] md: bind [ 28.966691] md: bind [ 28.966762] md: bind [ 28.992501] md/raid1:md3: active with 1 out of 1 mirrors [ 28.992528] md3: detected capacity change from 0 to 246107537408 [ 28.996048] md/raid1:md2: active with 2 out of 2 mirrors [ 28.996084] md2: detected capacity change from 0 to 2995645906944 [ 29.001030] md/raid1:md4: active with 1 out of 1 mirrors [ 29.001061] md4: detected capacity change from 0 to 245112242176 [ 29.007579] md3: unknown partition table [ 29.008767] md2: unknown partition table [ 29.018348] md4: unknown partition table [ 29.497204] bio: create slab at 2 [ 30.191097] ip_tables: (C) 2000-2006 Netfilter Core Team [ 30.239530] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 30.347474] init: dhcp-client (eth0) main process (7826) killed by TERM signal [ 30.547938] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 30.983398] EXT4-fs (dm-2): barriers disabled [ 31.010901] EXT4-fs (dm-2): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc [ 31.049349] EXT4-fs (dm-3): barriers disabled [ 31.075924] EXT4-fs (dm-1): barriers disabled [ 31.086806] EXT4-fs (dm-3): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc [ 31.232485] EXT4-fs (dm-1): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc [ 33.552468] ata1.00: configured for UDMA/133 [ 33.552476] ata1: EH complete [ 33.553260] ata2.00: configured for UDMA/133 [ 33.553264] ata2: EH complete [ 33.553342] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.559849] ata3.00: configured for UDMA/133 [ 33.559857] ata3: EH complete [ 33.559937] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.564554] ata4.00: failed to enable AA (error_mask=0x1) [ 33.565678] ata4.00: failed to enable AA (error_mask=0x1) [ 33.565891] ata4.00: configured for UDMA/100 [ 33.565908] ata4: EH complete [ 33.566184] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.576280] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.823040] usbcore: registered new interface driver usblp [ 33.890713] usbcore: registered new interface driver usbhid [ 33.890719] usbhid: USB HID core driver [ 35.589442] init: pkg-synoreport main process (12278) terminated with status 1 [ 37.744550] ata1.00: configured for UDMA/133 [ 37.744559] ata1: EH complete [ 37.922024] ata2.00: configured for UDMA/133 [ 37.922032] ata2: EH complete [ 38.064830] ata3.00: configured for UDMA/133 [ 38.064838] ata3: EH complete [ 38.344273] ata4.00: failed to enable AA (error_mask=0x1) [ 38.345422] ata4.00: failed to enable AA (error_mask=0x1) [ 38.345618] ata4.00: configured for UDMA/100 [ 38.345633] ata4: EH complete [ 38.417059] loop: module loaded [ 41.320000] iSCSI:target_core_rodsp_server.c:954 RODSPS Start-[38eaa7a107a9] [ 41.334891] iSCSI:extent_pool.c:619 INIT Extent-Pool [ 41.354757] iSCSI:target_core_device.c:577 Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 41.354889] iSCSI:target_core_lunbackup.c:401 512 buffers allocated, total 2097152 bytes successfully [ 41.477715] iSCSI:target_core_ep.c:864 RODSP plugin is enabled. [ 41.477722] iSCSI:target_core_ep.c:871 ODX Token Manager is enabled. [ 45.603562] usbcore: registered new interface driver usbserial [ 45.623569] usbcore: registered new interface driver ftdi_sio [ 45.623586] usbserial: USB Serial support registered for FTDI USB Serial Device [ 45.730253] usbcore: registered new interface driver cp210x [ 45.730269] usbserial: USB Serial support registered for cp210x [ 45.766312] usbcore: registered new interface driver pl2303 [ 45.766329] usbserial: USB Serial support registered for pl2303 [ 45.804180] usbcore: registered new interface driver ch341 [ 45.804198] usbserial: USB Serial support registered for ch341-uart [ 45.823616] usbcore: registered new interface driver ti_usb_3410_5052 [ 45.823635] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 45.823645] usbserial: USB Serial support registered for TI USB 5052 2 port adapter [ 46.387890] init: pkg-WebStation-userdir main process (14830) terminated with status 1 [ 47.958631] usbcore: registered new interface driver snd-usb-audio [ 48.033929] usbcore: registered new interface driver snd-usb-hiface [ 49.545628] init: pkg-WebStation-userdir main process (15604) terminated with status 1 [ 55.078038] init: pkg-surveillance-apid faild on spawn stage, stopped Hide C'est grave Docteur?! Edit : Le module "btusb.ko" est bien présent dans \lib\modules

J'ai fait la mise à jour (update 10) sans aucun soucis. @Polanskiman (ou autre), est-ce normal que mon dongle Bluetooth Kinivo BTD-400 ne soit pas reconnu ? (dans panneau de config -> sans fil -> Bluetooth : il m'indique : "veuillez insérer un adaptateur Bluetooth") Xpenology DSM 6.0.2-8451 (update 10) tourne sur un N54L, loader 1.01. Un soucis de driver non inclus? (pourtant ce dongle est indiqué comme compatible avec les 3615xs) Qque chose que j'aurais mal fait ? Merci d'avance.

Bonjour polanskiman, avez vous des nouvelles concernant le loader de jun pour les station n54l sous AMD afin de pouvoir passer a la version 6.1 ? cordialement

Bonjour a tous ! a mon tour, je fais un petit retour d'expérience, et si possible, une recherche de solution ! sur un bon vieux N54L qui tourne depuis deux ans en 5.2un de mes 5 disk a rendu l'âme. je le remplace par un neuf, effectue le reconstruction et me dis : Pourquoi pas mettre a jours ? je suis le tuto a la lettre, fais la modif des infos de la clé et lance le carnaval. tout se passe bien, aucune perte de data ni de config. du coup, je download l'upgrade 8, j'envois l'install, le truc reboot, et c'est le drame ! plus d'acces via navigateur, plus de SSH (c'est sensé etre normal...), plus de partage accessible. par contre, ça ping OK et Plex fonctionne. donc pas moyen de modifier le fichier de conf permettant de downgrader, c'est la misère ! dans la mesure où mes datas sont sauvegardés, je me dit que c'est peut être pas plus mal de tout remettre a plat. Boot sur une knoppix, un grand coup de gparted la dedans, les 5 disks vierges et ça repart pour une install. tout se passe bien, ( je ne passe pas l'upgrade 8, on me la fait pas deux fois !), creation des users, mise a jours des paquets... impec ! j'arrête le serveur pour le ramener a sa place, remise en route et plus rien ! même combat que pour la mise a jours ! plus d'accès. un petit coup de nmaps sur l'IP du serveur montre qu'il n'y a pas grand chose d'ouvert... log Starting Nmap 7.40 ( https://nmap.org ) at 2017-03-11 15:36 Paris, Madrid NSE: Loaded 143 scripts for scanning. NSE: Script Pre-scanning. Initiating NSE at 15:36 Completed NSE at 15:36, 0.00s elapsed Initiating NSE at 15:36 Completed NSE at 15:36, 0.00s elapsed Initiating ARP Ping Scan at 15:36 Scanning 192.168.0.100 [1 port] Completed ARP Ping Scan at 15:36, 0.13s elapsed (1 total hosts) Initiating Parallel DNS resolution of 1 host. at 15:36 Completed Parallel DNS resolution of 1 host. at 15:36, 0.02s elapsed Initiating SYN Stealth Scan at 15:36 Scanning 192.168.0.100 [1000 ports] Discovered open port 21/tcp on 192.168.0.100 Discovered open port 50001/tcp on 192.168.0.100 Discovered open port 3261/tcp on 192.168.0.100 Discovered open port 50002/tcp on 192.168.0.100 Discovered open port 161/tcp on 192.168.0.100 Discovered open port 49160/tcp on 192.168.0.100 Completed SYN Stealth Scan at 15:36, 0.22s elapsed (1000 total ports) Initiating Service scan at 15:36 Scanning 6 services on 192.168.0.100 Completed Service scan at 15:37, 73.68s elapsed (6 services on 1 host) Initiating OS detection (try #1) against 192.168.0.100 NSE: Script scanning 192.168.0.100. Initiating NSE at 15:37 Completed NSE at 15:37, 4.91s elapsed Initiating NSE at 15:37 Completed NSE at 15:37, 0.02s elapsed Nmap scan report for 192.168.0.100 Host is up (0.00060s latency). Not shown: 994 closed ports PORT STATE SERVICE VERSION 21/tcp open ftp Synology DiskStation Manager 5.2 ftpd 161/tcp open snmp? 3261/tcp open winshadow? 49160/tcp open upnp Portable SDK for UPnP devices 1.6.18 (Linux 3.10.77; UPnP 1.0) 50001/tcp open upnp Portable SDK for UPnP devices 1.6.18 (Linux 3.10.77; UPnP 1.0) 50002/tcp open http lighttpd 1.4.43 | http-methods: |_ Supported Methods: OPTIONS GET HEAD POST |_http-server-header: lighttpd/1.4.43 |_http-title: 403 - Forbidden 1 service unrecognized despite returning data. If you know the service/version, please submit the following fingerprint at https://nmap.org/cgi-bin/submit.cgi?new-service : SF-Port3261-TCP:V=7.40%I=7%D=3/11%Time=58C40B8B%P=i686-pc-windows-windows% SF:r(DNSVersionBindReq,20,"\0\x1e\0\x02\0\0\0\x01\x01\0\0\0\0\0\0\0\0\0\0\ SF:0\0\0\0\0\0\0\0\0\0\0\0\0"); MAC Address: 9C:B6:54:06:77:05 (Hewlett Packard) Device type: general purpose Running: Linux 3.X OS CPE: cpe:/o:linux:linux_kernel:3 OS details: Linux 3.4 - 3.10 Uptime guess: 0.056 days (since Sat Mar 11 14:16:56 2017) Network Distance: 1 hop TCP Sequence Prediction: Difficulty=261 (Good luck!) IP ID Sequence Generation: All zeros Service Info: Host: stock; OS: Linux; Device: storage-misc; CPE: cpe:/o:linux:linux_kernel:3.10.77 Hide j'en conclus bêtement qu'il n'y a pas grand chose qui tourne... donc en fait, c'est du one shot ! ne fonctionne que jusqu'au reboot ! en résumé : NL54, 5 x 1To ( 1, 2, 3, 4, 6), 4 Go de RAM réseau fonctionnel, FTP fonctionnel, et c'est tout. je suis preneur de conseils ! je me laisse une semaine avant de reinstaller une 5.2. mais je serais triste !

Bonjour, une question idiote , sachant que le nouveau loader pour passer a la 6.1 ne fonctionne pas encore pour AMD, comment puije savoir si mon N54L est AMD ou Intel ? dans le centre d'information du syno je vois : INTEL Core i3-4130 Puis je donc utliser le nouveau loader pour passer en 6.1 ? cordialement

Bonjour J'ai un sacré souci suite à une tentative d'amélioration (ajouter un 5ème disque dans mon HP GeN 7 N54L) comme quoi le mieux est parfois l'ennemi du bien, bref. Ma configuration initiale : DSM 6 update 7 ou 8, sur 4 disques en SHR (migration depuis DSM5). Lorsque j'ai tenté d'ajouter le 5ème disque, dans un 1er temps je n'ai rien modifié sur la clé et cela n'avait rien changé. J'ai tenté de mettre append SataPortMap = 41 et cela bootait encore mais toujours pas de 5ème disque. J"ai ensuite tenté de mettre SataPortMap = 14 et là c'est la drame. Depuis impossible d'accéder à la console et de relancer mon système. Il n'est même pas visible dans synology assistant. J'ai recréé la clé USB (même SN et même adresse MAC) sans changer aucun paramètre aux port SATA ( qui est bien à 4, bref tout pareil que lors de ma migration initiale) Si je ne mets qu'un seul disque dur, j'ai bien mon serveur qui est retrouvé dans synology assistant. Pr contre; dès que j'en branche plus d'un , plus rien. Avant que, par désespoir, j'écrase tout (disque par disque) et me retape toutes les configurations (même si j'ai une sauvegarde, ça m'étonnerait que ce soit si simple, et de toutes façons tout n'était pas sauvegardé, rien de dramatique mais bon quoi... ); voyez-vous un truc que je pourrai tenter pour retrouver son système fonctionnel ? Merci d'avance

Et en mettant le disque du Gen8 dans le N54L ?

Mon soucis est que la même clef fonctionne sur un Gen8 et ne fonctionne pas sur un N54l en DSM 6. Pourquoi ? La clef ne se voit pas sur le N54L avec la command lsusb.

Une idée ? Cela est normale que ça ne marche plus. Les modules ayant été compilés pour DSM 5.2 ne marcheront pas sous DSM 6.0. Il faut donc compiler à nouveau les drivers en prenant le code source de DSM 6.0. J'ai un ami qui a un GEN8 est cela fonctionne, mais sur le N54L. On peut avoir un tuto pour compiler les drivers ? Merci pour vos réponse.

Bonjour, Après avoir fait la MAJ DSM5.2 vers DSM6 mon dongle Zwave ne fonctionne plus. Config: N54L + Loader Jun 1.01 Driver: http://www.jadahl.com/ Aucune erreur dans dmesg Quand je fais un LSUSB, je ne vois pas le dongle et les modules CP210x et ftdi sont bien chargé. Avez-vous une idée ? Le dongle est bien reconnu sur mon raspberry. idem : https://xpenology.com/forum/topic/6367-tuto-installermigrer-dsm-52-à-602-loader-jun/?do=findComment&comment=58738

Bonjour, Merci pour le travail et le tuto, ma maj s'est déroulé sans problème jusqu'à l'update 8.... Je résume, création de la clé, maj vers la v6.0.2 de mon N54l, tout démarre, je fais la maj des applications, ras. Je télécharge le .pat de lupdate 8, je l'installe et redémarre et là, plus rien. Je pense à un problème d'adresse ip ayant configuré le xpenology en ip statique...mais il est bien identifié par la livebox... Comment faire ? Merci d'avance.

AAAAH j'ai le même pb avec ESXi 6.0 et 6.5 depuis le passage à l'update 9 : plus rien ne marche. Le serveur est n'a pas d'IP. Dans la console ESXi je vois que la CPU de la VM DSM est à 100%, mais impossible de voir ce qu'il fait. Je constate aussi que les accès aux disques sont très importants aussi (d'ailleurs la diode sur mon N54L) est tout le temps allumé. Je suspecte qu'il reconstruit ou vérifie la parité sur mon volume SHR AVANT de faire le démarrage réseau. Du moins j'espère. Je vais donc attendre une nuit complète pour m'assurer que ce soit bien ça et non pas Synology qui aurait bloqué qqchose... Pour info j'ai le loader 1.01 et j'ai aussi testé avec le loader 1.00

Salut, J'ai fait hier soir sans soucis la maj de mon proliant n54L gen7 ( la version AMD ) et tout c'est bien passé sans perte de données.Juste quelque paquets que j'ai réinstaller et les user à remettre ( installation propre oblige ). Je peux faire la MAJ update 8 sur lui ? Bon j'édite car je l'ai fait quand même via l'interface et sa à marché

Bonjour j'ai un n54l en 5.2 et il n'est pas visible sur le réseau je ne comprends pas...

Bonjour, Simplement un grand merci à Polanskiman pour le tuto. Suivi scrupuleusement sur deux machines et tout déroulé sans problèmes, ni pertes de données. -Mise à jour sur un HP N54L, de DSM5.2 à DSM6.0, puis update 7 (Ca a même réglé mon vieux problème de redémarrage planifié qui ne fonctionnait plus en 5.2). -Fresh install sur un Intel G4400 + Msi h110l pro, DSM6.0 puis update 7. Tout fonctionne impeccablement

Bon, installer sur mon N54L. Il était sous un 5.0, j'ai tenté direct la MAJ avec une nouvelle clé. Pour information j'ai deux cartes réseaux sur la bestiole, celle intégré, et une carte Pci E realtek. Quand j'ai fait mac1 et mac2 je sais pas à quelle interface il a associé.... Ensuite, après avoir choisit le PAT, j'ai lancé, j'ai eu une erreur disant de se connecter en telnet... Finalement l'IP avait changé, et il avait repris l'IP d'avant migration. (pas sur la même carte je crois mais pas sur...) Du coup, volume nickel. Configuration aussi. c'est parfait... Bon le HighAvailibity fonctionne toujours pas en SHR. Et donc ma seconde carte réseau en PciE équipé d'un RTL8111 ne fonctionne pas, quand je plug ca s'éclaire mais j'arrive jamais à joindre... Le pilote ne serait pas inclus ? Faut demander sur l'autre topic anglais ? Je teste les nouveautés là, la nouvelle centralisation du Backup a l'air vraiment bien faite avec l'assistant. Ah oui, et j'ai utilisé une autre clé USB, je fais comment si je veux réutiliser la première que j'avais avec Nanoboot ? Faut que je refasse tout ? Je dois la cloner ?

Essayez un autre navigateur ou téléchagez l'update 5 manuellement et essayez d'installer manuellement. Je viens de tester sous FF/Chrome/Safari en manuel et auto sans succès :/ J'ai trouvé ceci >>> https://xpenology.com/forum/topic/6550-n54l-dsm-602-update-2-maj-impossible/ Adapter en fonction. Je pense que ca devrait marcher.

Je viens d'essayer ce week-end , et meme resultat. J'ai juste progresse un peu sur ce que je pensais etre une non detection des port USB Si juste apres un reboot , j'insere une cle usb (memoire) elle est reconnue sur tous les port du N54L. Si j'insere une cle tuner TNT , la j'obtiens un message dans le log me disant que le driver n'est pas dispo. Et la commande lsusb affiche bien les id de la cles Par contre si j'insere ma cle domotique (qui utilise un driver usb - serial) rien ni dans dmesg ni dans lsusb. Et le plus drole apres avoir insere cette cles sur un port donne. plus rien n'est reconnu sur ce port (meme la cles usb de stokage) jusqu'au prochain reboot. Plus d'idee la . Je crois que je vqis devoir trouver une autre solution pour ;on serveur domotic Bonne soiree

Bonjour et merci pour ce super travail !! je souhaiterai faire la mise a niveau de mon N54L (l'ensemble fonctionne tres bien sur DSM 5.2 5644 update 5) mais j'aurai plusieurs question: - le package Plex fonctionne t'il correctement avec la mise a jour DSM6.0 ? -concernant le nombre de disque et de contrôleur a inscrire sur la clef usb, je suis un peu largué... j'ai installé 4 disques western red : 2 de 1 To et 2 de 3To , ils sont montés en SHR et formatés en ext4. -je suis un peu perdu concernant la derniere version du bootloader et l'image du dsm à installer. merci pour votre patience et vos réponses à mes questions qui peuvent paraitre idiotes.

Bonjour à tous et d'abord merci pour tous le travail fournit ici. Je viens de passer mon hp n54l en dsm 6.0 grâce au tuto (avec le booloader de jun 1.0.1 Tous c'est bien passé côté DSM et disques, le problème c'est que mes périphérique USB ne sont plus reconnus. J'utilise mon syno pour héberger un serveur domotique (Jeedom) dans un container docker et donc j'ai plus accès à mon stick USB controller J'ai utilisé le package usbserial d'ici http://www.jadahl.com pour les driver La clés utilisé le driver cp210x qui est bien chargé , mais aucune clés n'est reconnue Rien du tout concernant les port USB dans dmesg. Quelqu'un aurait-il une piste? Merci

Pb résolu : https://xpenology.com/forum/topic/6498-urgent-dsm-6-casse-sur-n54l/?do=findComment&comment=58288

Bon ce matin gros pb pour moi : j'ai redemarré mon nas (via l'interface). Depuis impossible d'accèder à l'interface, ou aux partages réseaux ... Quand j'allume le serveur rien de particulier. Dans le doute j'ai mis à jour le loader en 1.01 en remodifiant bien le grub, mais idem ... Si quelqu'un peut m'aider ... (j'en étais resté à l'update 2, pas fait update 3 ou 4) Merci beaucoup. PS : pour le sataport (pas configuré : j'ai 5 disques branché sur le N54L, que faudrait-il mettre ?) Un ping sur l'adresse ip du serveur répond bien.

Bonjour, J'ai pu faire la mise à jour dsm 6.0 sur mon n54l, mais lorsque je souhaite faire la mise à jour de l'update 4, j'ai une erreur indiquant que le fichier est corrompu. Y a t'il une étape à faire avant de lancer la mise à jour? merci.

Bonsoir à tous, Un grand merci pour ce super Tuto. Tout s'est bien passé avec un N54L, j'avais juste oublié que c'était de l'AMD... encore un problème d'interface clavier/chaise. A+