igbs

ставил DVA1622 как обычно с USB-flash arpl ...родную флешку заменяем на новую c arpl... и вперед! 8 лицензий будет автоматом если сгенерить правильный серийник! DVA и даёт распознавание лиц.

Да конечно скорость мерил с iperf3... запускал сервер на десктопе с Xeon процом и клиент на NAS...

Я ставил arpl на Terramaster F2-422 которая с 1x10Gb и 2x1Gb - 918 и 920 модели не видели 10Гиг, 3622 увидел 10Гиг но полную скорость не дал: где-то около 6.5Гиг. В итоге остановился на DVA1622 - нет 10ки но камеры распознают лицо и 8 лицензий. Как система наблюдения -оК.

- Результат: Успешно - Версия и модель загрузчика: tinycore-redpill.v0.9.0.2 =>broadwellnk-7.1.0-42661 - Версия DSM: DS3622xs+ 7.1.0-42661 Update 3 - Дополнительные модули extra.lzma: NO - Аппаратное решение: Материнская плата: ASRock Rack C3558D4I-4L Процессор: Intel® Atom® C3558 Память: 8ГБ DDR4 Нет транскодинга! - Комментарий: ставить только через manual mode my.sh скрипт

Big THANKS Master Suh! I connected 4 drives and heve tried first option and ... Successful install DS920+ 7.1.. but the Storage Manager can see only 2 HDD of 4 I can see all 4 drives from the terminal: ... any idea how to fix it? Should I use the second option - dynamic disk tree? Thanks again..

My X520 10Gb PCIe is singe port ... "So, how to safely use ext in X520 10Gb dual NIC is as follows. Build DS3622xs+ loader without plugging X520 10Gb into PC X520 10Gb is to plug in later." - Yes I read this.. Thanks..

Thanks.. will try... I need the ixgbe also ... I've got the Intel X520 10Gb PCIe-card and have a plan to use it..

Hello guys, Now I'm using Intel 82576 2x1.25Gb in the PCIe-slot ... plus (you are right) the mobo has 4x Marvell 88E1543 ( I210 ) built-in.. I can't connect to any of Marvell 88E1543 4 ports (because of error??)... but Intel 82576 works fine ... I've tried also ./my.sh DS920+J jumkey - no go.. The last image is .. ./my.sh DS920+ I think .. I need to wipe out first 10..15% of the HDD space and try again... because they are not a new HDD .. I used before in the Syno ..

Please... I connect 2 drives only for now..

Thanks Peter.. Actually the mobo has 6 different bios configuration for the SATA ports - the max supporting SATA drives are 9 only.. I found on the google: The C3558D4I-4L has 13 storage connectors, of which up to 9 can be connected at once. 7 configurations of PCI-E, SAS and Mini-SAS HD Connector are possible. They are: config1 PCI-E x4, 5x SATA 9 ports config2 PCI-E x4, 1x Mini-SAS HD (A), 1x SATA 5 ports config3 PCI-E x4, 1x Mini-SAS HD (B), 1x SATA 5 ports config4 PCI-E x8, 1x SATA 1 port! config5 5x SATA, 1x Mini-SAS HD (A) 9 ports config6 2x Mini-SAS HD, 1x SATA 9 ports config7 5x SATA, 1x Mini-SAS HD (B) 9 ports As you can see, none of the configurations lets me attach 12 drives. I switched the BIOS settings to config2 - 5ports... still Syno Assist. can't find the HD drives I connect the putty to the COM-port and check - the OS can see all drives.. Something wrong..

Hello team, I need the help of audience.... I've got the mobo Asrock C3558D4I-4L ... supported 9 SATA ports in different configurations.. I have tried to install many different images: ./my.sh DS920+, /my.sh DS918+, /my.sh DS3622xs+ and Syno Assist can't find any disk: for the Config.1: Found "00:13.0 Intel Corporation DNV SATA Controller 0 (rev 11)" Detected 8 ports/3 drives. Bad ports: -7 -6 -5 -4. Override # of ports or ENTER to accept <8> Found "00:14.0 Intel Corporation DNV SATA Controller 1 (rev 11)" Detected 6 ports/0 drives. Bad ports: 1 2 3 4 5. Override # of ports or ENTER to accept <6> Computed settings: SataPortMap=86 DiskIdxMap=0008 WARNING: Bad ports are mapped. The DSM installation will fail! for the config.2: Found "00:14.0 Intel Corporation DNV SATA Controller 1 (rev 11)" Detected 6 ports/1 drives. Bad ports: 3. Override # of ports or ENTER to accept <6> Computed settings: SataPortMap=6 DiskIdxMap=00 WARNING: Bad ports are mapped. The DSM installation will fail! ALSO I've tried to build the image with the disk tree mode: ./my.sh DS920+J jumkey noclean and ./my.sh DS1621+J jumkey noclean ... the same result Need your help please! Any suggestions? Thanks..

Join as well... Big thank you!

Hello pocopico, Please correct extention: https://github.com/pocopico/rp-ext/blob/main/atlantic/rpext-index.json I've got errors: [!] Failed to dump extension pocopico.atlantic for platform ds920p_42218 as its recipe file cannot be retrieved. Isn't the extension misspelled or not supported on that platform? [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.atlantic/ds920p_42218/check-atlantic.sh file... [OK] [-] Recipe file for extension pocopico.atlantic platform ds920p_42218 is logically invalid - recipe defines kmod crc-itu-t.ko *FILE* which doesn't exist after all files entries are processed. You SHOULD contact the extension packer to report that (see below) Thanks

at the boot screen press "esc" and select the USB device... also you can add to the VM settings args 'bootindex=number' .. where the number is your virtual boot USB.. Regards,

да вроде верно... я и хотел предложить спросить в англ.ветке