Jump to content
XPEnology Community

altas

Member
  • Posts

    161
  • Joined

  • Last visited

Everything posted by altas

  1. Yes i used the same steps but now with sata boot
  2. I got an DS3617xs done on a HP Gen8 Micro but on/with ESXi (Internet blocked) Really no idea why Baremetal get corrupt pat file as i used the sam for ESXi VM Any idea how to figure this out?
  3. @pocopico can the DS3617xs file corrupt error from the unsupported CPU be? What we maybe have in the HP gen8 Micro. As an 3615xs is working well.
  4. is it very important to check what CPU Model is used and what Synology NAS we want to compilte? DS3615xs => Bromolow=> Intel Xeon E3-1230 v2 DS3617xs => Broadwell => Intel Xeon D-1527 RS3617xs Intel Xeon E3-1230 v2 Quad Core8 Bromolow DDR3 ECC 4 GB so for a HP Gen8 Micro with Xeon E3-1230 v2 the support is only on a DS3616xs or RS3617xs
  5. On thx I will give a try and will confirm
  6. A question: Does a HP Gen8 Micro Xeon E3-1230 V2 work with 3715xs in Baremetal config??
  7. The vmdk on github has a problem to boot with ESXi But it exist an esxi ssh command to fix this Nee do check what i have used * vmkfstools -i "hdd.vmdk" "fixed-hdd.vmdk" -d thin http://www.das-werkstatt.com/forum/werkstatt/viewtopic.php?t=2156 *
  8. Successfully installed it on ESXi 6.5 on HPGen8 Thx for the info about incrase the Memory to compile the Loder to 3-4GB Important you need the .pat file in the Cache Folder to success install DSM
  9. yes this is the setup.. booting is working but the VM crashs at this point in the loader creation if i do the same with putty i lost connection
  10. i loaded the tinycore-loader vmdk on my ESXi Host.. first the file seems to be corrupt. i fixed it with this command vmkfstools -i "hdd.vmdk" "fixed-hdd.vmdk" -d thin after that the VM starts otherwise error like Harddisk scsi0:0 could not be opened: not supported or invalid hard disk type 7. Make sure that the harddisk has been imported but the VM crash at * Creating loader image at loader.img.... * any idea?
  11. I recommend not update I am sure that the package what are not supported under 7 will be removed
  12. SATA or USB Boot? i got mine ESXi Test working with SATA Boot
  13. Good explaining about SataPortMap https://11q.kr/www/bbs/board.php?bo_table=s11&wr_id=11263&sst=wr_datetime&sod=desc&sop=and&page=3 use English translation with Google chrome when you check this page.. there are lot more stuff. ESXi config instruction etc.
  14. i have successfully created with tossp/redpill-tool-chain an bromolow 7.0.1 image and converted it to an VMDK File for my HP GEN8 ESXI Test System. first i had some issues with my 50GB Test SATA HDD.. i have to move them from Sata Controller 1 to Sata Controller 0 => 0:1, RedPill VMDK is on Controller0 0:0 to get the the HDD visible
  15. not sure if this message is still valid If you're running QEmu-based virtualization (e.g. Proxmox or VirtualBox) set vid to 0x46f4 and pid to 0x0001
  16. No Serial Only Putty with IP from ILO you can have for free a 30day Trial Full ILO License. in putty change unter Logging => All session output, to get all information from the GEN8
  17. @Mixpower so then time to check this Driver also on my GEN8 current i use the Intel NIC
  18. @Mixpower use other USB Stick, to check if you get same error with the VID/PID i had one what gives me Errors on Gen8, after switch to another USB Stick with different VID/PID it boots up
  19. I uses the portable partion Manager from xpenology Tools to set the first as active.
  20. Hehe I am happy with my 5G and for 1month test with a Public IP Yes Init7 is a good Swiss provider
×
×
  • Create New...