altas
Member-
Posts
161 -
Joined
-
Last visited
Everything posted by altas
-
the remaining challenge is to be sure you have a working tinycore loader befor start migration. and for that you have to play arround with the current working NAS or you have a similar Device. or remove all HDDs from the current Setup and use a empty/clean HDD to prepair the tinyloader and rollback to the working setup with the HDDS to start then the migration process
-
cool thx ! so then i can confirm that my Test migration from DS3617xs to DS3622xs+ was successfully (Baremetal) i used 1 HDD with some Test Data and everything was still available. Steps i did 1. block internet to DS3617xs 2 turn off the DS 3 switch the Loader (USB Stick) 4 Boot up and wait until the DS come up and reachable in the Network (ping) 5 use the pat file from the tinyloader and start migration, i used the Option dont keep settings( 2.Option), maybe someone can use NR1 as test 6 wait until the migration process has reached 100%, then the DS should rest as usual, 7 wait until the DS is back online and you can process with DSM7 Wizard to complet.
-
so means you bootet the DS3622xs+ VM with the Sata 1:0 from the VM DS3615XS? for Baremetal test.. boot the DS3615xs installation with the DS3622xs Boot Stick and use the 7.0.1 pat file from the loader.
-
so you started the Update process with the 7.0.1 pat file on the running DSM 6.2.3 and switched after the reboot to Tinyloader ? or what was the successfully way?
-
Develop and refine the DS3622xs+ loader
altas replied to yanjun's topic in Developer Discussion Room
good idea.. i switched to AHCI Mode for the onboard B120i Controller, the P222 is limited to use it like this... -
Develop and refine the DS3622xs+ loader
altas replied to yanjun's topic in Developer Discussion Room
strange.. i never had any problem to downlod from cndl.. i did it right now. why not pre-download and but it in the cach Folder ? -
RedPill - the new loader for 6.2.4 - Discussion
altas replied to ThorGroup's topic in Developer Discussion Room
https://xpenology.club/install-dsm-7-on-baremetal-or-vm/ -
RedPill - the new loader for 6.2.4 - Discussion
altas replied to ThorGroup's topic in Developer Discussion Room
-
Develop and refine the DS3622xs+ loader
altas replied to yanjun's topic in Developer Discussion Room
And how to configure the HDD?? Each drive on the onboard raid controller as own array? -
RedPill - the new loader for 6.2.4 - Discussion
altas replied to ThorGroup's topic in Developer Discussion Room
For EsXi you dont need PID/VID if you use SATA boot -
Develop and refine the DS3622xs+ loader
altas replied to yanjun's topic in Developer Discussion Room
It was to play around, as i found this P222 in mY Hardware stuff But i am not happy with it, will switch back to onboard controller. Maybe satamap are wrong, but i am not able to create volumes after i add more than 2 Disks They stay on status Dedected. Not sure what is better hardware raid or let DSM manage it. -
Develop and refine the DS3622xs+ loader
altas replied to yanjun's topic in Developer Discussion Room
-
Redpill - extension driver/modules request
altas replied to pocopico's topic in Developer Discussion Room
but i need it for Broadwell ds3622xs+ edit: got it -
Develop and refine the DS3622xs+ loader
altas replied to yanjun's topic in Developer Discussion Room
ah ok need to test i only had the shutdown/Reboot stuck in DSM for Barmetal and Gen8 will give it a try later -
Redpill - extension driver/modules request
altas replied to pocopico's topic in Developer Discussion Room
-
Develop and refine the DS3622xs+ loader
altas replied to yanjun's topic in Developer Discussion Room
use the Tinyloader to create the Image. its not needed to add the extension for acpid, mine was working without. -
Redpill - extension driver/modules request
altas replied to pocopico's topic in Developer Discussion Room
lspci -tnnvq -[0000:00]-+-00.0 Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM Controller [8086:0158] +-01.0-[07]----00.0 Hewlett-Packard Company Smart Array Gen8 Controllers [103c:323b] +-06.0-[02]----00.0 Hewlett Packard Enterprise Device [1590:005f] +-1a.0 Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] +-1c.0-[0d]-- +-1c.4-[03]--+-00.0 Broadcom Limited NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] | \-00.1 Broadcom Limited NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] +-1c.6-[04]----00.0 Renesas Technology Corp. uPD720201 USB 3.0 Host Controller [1912:0014] +-1c.7-[01]--+-00.0 Hewlett-Packard Company Integrated Lights-Out Standard Slave Instrumentation & System Support [103c:3306] | +-00.1 Matrox Electronics Systems Ltd. MGA G200EH [102b:0533] | +-00.2 Hewlett-Packard Company Integrated Lights-Out Standard Management Processor Support and Messaging [103c:3307] | \-00.4 Hewlett-Packard Company Integrated Lights-Out Standard Virtual USB Controller [103c:3300] +-1d.0 Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] +-1e.0-[14]-- +-1f.0 Intel Corporation C204 Chipset Family LPC Controller [8086:1c54] \-1f.2 Intel Corporation 6 Series/C200 Series Chipset Family SATA RAID Controller [8086:1c04] -
Redpill - extension driver/modules request
altas replied to pocopico's topic in Developer Discussion Room
any recommendation what extension to use for HP P222 SAS Card?