altas

Members
  • Content Count

    46
  • Joined

  • Last visited

Everything posted by altas

  1. Good explaining about SataPortMap https://11q.kr/www/bbs/board.php?bo_table=s11&wr_id=11263&sst=wr_datetime&sod=desc&sop=and&page=3 use English translation with Google chrome when you check this page.. there are lot more stuff. ESXi config instruction etc.
  2. i have successfully created with tossp/redpill-tool-chain an bromolow 7.0.1 image and converted it to an VMDK File for my HP GEN8 ESXI Test System. first i had some issues with my 50GB Test SATA HDD.. i have to move them from Sata Controller 1 to Sata Controller 0 => 0:1, RedPill VMDK is on Controller0 0:0 to get the the HDD visible
  3. not sure if this message is still valid If you're running QEmu-based virtualization (e.g. Proxmox or VirtualBox) set vid to 0x46f4 and pid to 0x0001
  4. No Serial Only Putty with IP from ILO you can have for free a 30day Trial Full ILO License. in putty change unter Logging => All session output, to get all information from the GEN8
  5. @Mixpower so then time to check this Driver also on my GEN8 current i use the Intel NIC
  6. @Mixpower use other USB Stick, to check if you get same error with the VID/PID i had one what gives me Errors on Gen8, after switch to another USB Stick with different VID/PID it boots up
  7. I uses the portable partion Manager from xpenology Tools to set the first as active.
  8. Hehe I am happy with my 5G and for 1month test with a Public IP Yes Init7 is a good Swiss provider
  9. 5G in Swiss give me 600/120 [emoji1787][emoji1787][emoji1787] 33.- Euro For the Gen8, i use the internal USB Port
  10. Upgrade done! 1. download the 7.0.1 from Synology 2. start upgrade on the currrent DSM 7.0 3. compile the Loader for 7.01 (i used a new USB Stick) 4.Shutdown the GEn8 replace the USB Stick with the new 7.0.1 Loader onit 5. Start the Gen8 and maybe 5min later you should have access again on the WebPage
  11. is it possible to upgrade from DSM 7.0 to DSM 7.0.1 with the DSM7.0 Redpill Loader ?
  12. On my Gen8 the Docker is still running, I have now 4 Containers started
  13. i have now docker installed on my DSM 7.0 on ds3615xs and started an nginx1 Container.. since 50min up and running.. no crash nothing add now influxdb container... keep you updated 30min running influxdb container.. no crash still stable
  14. is this Docker Crashes also in 6.2.4 or only in DSM7 ? maybe docker has some problems with DSM7 i will do a test today evening with my fresh Gen8 on DSM7 and a Docker Image.
  15. it is not asp its vsp to start the Serial output on SSH. in the grub file i set console=ttyS1,115200n8 or ttyS0,115200n8
  16. @nemesis122 you should able to connect with SSH on the ilO Port to get Serial Console output.
  17. i keept my Gen8 running over night and did not had any Reboot. i should say that its a Clean DSM installation no Docker or any other 3rd Party Software is installed right now. @nemesis122 can you pm me your Config for bromolow-7.0.1-42214 for the Toolchain ?
  18. i got it work after a lot of Linux learnings to build the Image for my GEN8 with Intel NIC i did not get anymore the this Stop at the Boot process. The InfoCenter is current empty.. seems somewhere in this thread is hint to that problem i migrated from a 6.2 installation to DSM 7.0.41222 and did not loos any of my Test Data what i have befor copied on the NAS
  19. Yes its an PCIe NIC from Intel, its should be an INTEL E1G44ET PRO/1000 ET QUAD PORT PCI-E SERVER NIC yes, i add my VID/PID etc.
  20. only Free License for iLO the NIC is active but no IP/DHCP Lease
  21. Baremetal DSM7 for a HP GEN8 i have got one from WiteWulf but it stops somewhere
  22. has someone a tut to create a loder under win10 ? my linux skills are a bit rusty you mean this partition to set as active, right?