Ticariocman
-
Posts
25 -
Joined
-
Last visited
Everything posted by Ticariocman
-
Thanks Polanskiman. Re-imaging usb key let me see the Nas back with "Migratable" status. But under "Migratable", all my settings are gone even a server (Nas) name and I cannot change it back. In this case, I'd better re-format all my 12 HDDs and re-build a new Nas from beginning. It costs me time a lot to re-build and therefore, for those who are going to build a AMD Nas like me, BE CAREFUL. You'd better wait for Jun's V1.02a for AMD or just stay where you're at DSM 6.0.2 (or DSM 5.2). Do not update and you're warned.
-
I couldn't wait till Jun launches out DSM V1.02a for AMD bare metal. Today, I might as well decide to use V1.01 to build an AMD Nas. Everything looked fine during the setup until it asked me to update. Checked Polanskiman's tutorial and found he said "You can then proceed and update DSM 6.0 up to DSM 6.0.2-8451 update 11". Once again, I followed him and downloaded DSM 6.0.2-8451 update 11 http://from here viewtopic.php?f=2&t=33043 (Critical Updates specifically for DSM 6.0.2 can be found here - the last line for U11). And of course, I picked the correct model DS3615xs. Unfortunately after I manually updated to U11 from the .pat file I downloaded, my Nas now can't be seen from the network anymore. Doesn't matter how hard I tried such as "force install", "hard boot",... it's completely gone. Have you guys seen this issue before? I really need your help and much appreciate it. Thanks.
-
XPEnology Configuration Tool & Bootloader DSM 6.0.2-8451
Ticariocman replied to quicknick's topic in Loaders
Guys, don't just post for asking questions. For those who successfully installed new bootloader of Quicknick please also post and say THANK to support his spirit. Thanks. -
Sorry for my newbie question. How do I open .vmx file directly by VMware workstation? Do I have to replace "VMname".vmx by DS3615xs.vmx I just downloaded from Jun and then hit Power button on VM? Thanks.
-
...Because I upgraded mine to a xeon, I can run more than one OS and pass through a disk controller (Dell H310 flashed in IT mode) to xpenology. ...So hi everyone Hi, I also have Dell H310 in IT mode. How did you pass through disk controller to xpenology? And you can see S.M.A.R.T after the "pass through"? Are your HDDs spinning down/ sleeping now in idle time? Thanks.
-
Yes, sure if you want WOL. Otherwise, forget it.
-
Yes I did it. Check fiew post, i describes what I did. If you want your vm to autoboot, create a batch file with "vmware - x yourvmfile". I store 1 VMK / disk. So if one disk fails, i add a new one, and recreate the missing vmk Envoyé de mon SM-T700 en utilisant Tapatalk I read all your other posts but didn't see how you boot it up on VMWare Workstation. Once again, do I need an iso or just download img file to boot from it? Thanks.
-
Thanks, finally I got you. A quick question here is how you booted into grub menu? I can burn .img file of Jun into a usb flash drive and boot it up on a bare metal machine. But with a VM Workstation, do I have to have a iso file and put it in CD/DVD drive of virtual machine to boot it up? Correct me if I'm wrong. Once again, thank you for your precious reply.
-
Over 165 people read it, but nobody can help? I don't think nobody using VMWare Workstation.
-
Human being is not perfect and therefore things they've made also not perfect either. You think you have no risk if you buy Windows or Mac? If you don't trust it, do use it. Why bother?
-
Has anybody successfully built a Nas based on new DSM 6.0.2 loader on VMWare Workstation? Do I need an iso or img file to boot it up? Thanks a lot.
-
My daily working Windows 8.1 has some spare HDDs and now I plan to build a Nas on top of it thru VM Workstation. Has anybody successfully built a Nas based on new DSM 6.0.2 loader on VMWare Workstation yet? Please shed some light briefly on how to do it. Thank you . I appreciate it.
-
Tutorial: Install/Migrate DSM 5.2 to 6.0.2 (Jun's loader)
Ticariocman replied to Polanskiman's topic in Tutorials and Guides
Totally agreed with Faro. So far, we haven't had tutorial about 1. HDD hibernation/ auto power off. 2. Power off button. 3. CPU power state. I appreciate if someone spends his hard time to write it down here. Thanks. -
Hello everyone, when I use ESXI 6.0 U2 for DSM 6, I have no way to see my Disk info thru S.M.A.R.T. In other words, my Nas has no spin down (hibernation) at all. For those who are using ESXI 6.0 U2, can you see it? Thanks.
-
Compiling any disk adapter modules is not possible at the moment due to unexported syno_libata_get_index function (declared in libata-core). So only way to fix it is recompile kernel (we don't have latest kernel sources to do that) or somehow modify drive adapter sources to not depends on syno_libata_get_index function. A newbie question. Just don't know what you meant evdev, button: for acpid My humble guess is if I use your updated ramdisk.lzma, I can simply turn off my Nas by pressing the button, no more no less right? Thanks.
-
Next time don't waist your value time. Read first...
-
Report... report... report... annoying BIOS reset still exists on new loader! I used new loader to install DSM 6 on (bare metal) my Asus Intel H87 plus mobo. Everything looked fine until the first reboot right after configurations written on HDDs. All I have is a blank screen. It even didn't let me log in BIOS to take a look after I disconnected all drives. Had to do a trick by taking battery out, clearing CMOS to set BIOS back up. Next step, when I tried to update to DSM 6.0.2-8451 Update 2, after the reboot, once again the nightmare is back - got BIOS reset again. Tried both Jun's image as well as hybrid image at page 10 but no luck. Anybody has any experience or solutions that can help please advise. Thanks. Your inputs would be much appreciated.
-
What is your 3rd party tools? When you use those, did you have to add the Powerdown sh script to the rc.d folder? If I use DS Finder to wake my nas up thru phone, should I add the Powerdown sh script to the rc.d folder?
-
Oh... got it. Thanks.
-
Looks like people still abuse QC...
-
Hi #H, I also have a motherboard ASUS H87i-plus. What do you mean "wol doesnt work with the built in Intel card"? How did you know?
-
Yes, you're right. I just want to know why I have to change PID, VID, SN, and MAC if I use DSM 6. Anybody? Thanks.
-
Thanks for the reply. But if I don't use QuickConnect, can I pick randomly MAC & SN? Do I get a loop-reboot issue?
-
Hi all, My xpenology Nas running DSM 5.2-5644 Update 5 just fine. People told me if I want to use DSM 6, definitely I have to change PID, VID (according to my current USB drive) and MAC as well as SN (according to excel file) to have it runs correctly. Why? I really want to build another Nas that's running on DSM 6. But before that I need to know why I have to do this, do that... Thanks and your inputs would be much appreciated.
-
I'm a newbie here. Searched around but couldn't find topics or instructions that show how to copy/ transfer files between 2 Nas. I want to build 2 small nas that I can copy things between them when needed (NOT backup). Couldn't figure out the best way to do this job. Please help. Thank you and much appreciate your inputs.