Jump to content
XPEnology Community

Leaderboard

Popular Content

Showing content with the highest reputation on 10/16/2018 in all areas

  1. This is what i did. If you are using 3617 download the other loader! And flash it to your USB. Download old .pat file from synology. Update manually, migrate data. never click upgrade! Now you need to setup everything from scratch but most likely all your data will be safe! Do it on your own risk.
    1 point
  2. @smidra (and others), you should have read the posted Warning! and thread to save yourself some problems.
    1 point
  3. Well, for me the 6.2 with Jun's loader was working fine until the 6.2.1-23824 update. I updated from the DSM interface and after reboot the LAN stopped working. (Blinked orange). Honestly, I have no idea what needs to be fixed, just trying to provide as many n00b information to help the competent ones to fix it
    1 point
  4. Just checked and my onboard NIC works fine too. It's an Asrock J3455-ITX board (the one with 4x Sata). Loader 1.03b 6.2 U2 is installed (I've not tried 6.2.1 yet).. Both boards (mine and the 2x Sata 'B' version) have the same onboard NIC, so it should work...
    1 point
  5. On esxi 6.5 looking good so far.
    1 point
  6. I have J4105 which presumably has the same ASMedia controller, and this is not the case. The four ports (Intelx2, ASMediax2) line up disk 1-4. Which image are you using?
    1 point
  7. в grub.cfg есть такое значение для загрузки как: console=ttyS0,115200n8 и что это и для кого это написано? if serial --port=0x3F8 --speed=115200;then set has_serial=true terminal_input --append serial terminal_output --append serial что бы лог снять не железе нужно кабель RS232 подключить к компу на com1, на esxi проще там сыпит serial.log в стораж учи матчасть дядя и что ты в логе хочешь увидить? как модули подгружаются не проще ли просто вставить свисток с бубунтой в железо на котором ты хочешь xpenology подымать и выполнить: lspci -k | grep 'Kernel driver' и тебе покажет вывод какие дрова нужны можешь и в уже установленой dcm просто проверить: root@nas916:~# lspci -k | grep 'Kernel driver' Kernel driver in use: i915 Kernel driver in use: ahci Kernel driver in use: xhci_hcd Kernel driver in use: pcieport Kernel driver in use: pcieport Kernel driver in use: pcieport Kernel driver in use: pcieport Kernel driver in use: e1000e Kernel driver in use: r8168 Kernel driver in use: ahci но ты можещь конечно взять паяльник и снимать лог
    1 point
  8. Да, это с третьего поста стало понятно, и то что мы тут биссер метаем тош по ходу зря. Вангую, чел или уже закинул, или вот-вот закинет удочки на сино форумы, а в результате плюнет и скажет "шо то х..ня, шо то х...ня", уже не говоря о том что посты плюсовать за помощь тут вообще считается дурным тоном...
    1 point
  9. Ну что, заказал мамку ASRock J3455-ITX, одну плашку памяти на 4 гига AS04GFA60CAQBGC и плату расширения STLab A-480. Ну и дополнить это все еще одним жестким диском на 6 тб WD60EFRX (к уже имеющимся 5-ти винтам) Встанет это в замен Asus E35M1-I и 4 гиг памяти. Хрено на ней работает отлично, 4 гб хватает с головой (виртуалок не использую). Приедет комплектуха - пересоберу NAS. Будет фотоотчет. Пс: кто уже пользует такую мамку? Как проц потянет raid5? Jbod собирать стрёмно, а в синглах винты держать надоело...
    1 point
×
×
  • Create New...