DSM 7.2-64570

[nicoueron]

Release notes can be found here 7.2-64570. This version cancels and replaces 7.2-64561

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.2-64561 with ARPL-i18n 23.5.10

- Loader version and model: arpl-i18n 23.6.2 DS920+

- Using custom extra.lzma: NO

- Installation type: Baremetal - Intel core i7 - 10Go RAM

- Additional comments with older version canceled : 

• Recreate USB boot drive with ARPL-i18n 23.6.2
• Build boot loader (select model, SN, Mac, build)
• reboot
• Follow prompt for upgrade from browser
• just need to reactivate Advcanced Media Extensions (AME 1.1.0-51005) and uninstall NodeJS v12 beacause now it's NodeJS 18)

[alexnikolas]

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.2-64570

- Previus Loader version and model: Arc Loader 23.5.55 / DS920+

- New Loader version and model: Arc Loader 23.6.30 / DS920+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Nettop 3QNTP-SHELL- CPU CELERON J1900 (4Core), RAM 8Gb DDR3 1333, HDD WD Blue 2x1TB

- Additional comments: Switching BIOS to mode UEFI

Edited June 9, 2023 by alexnikolas

[JNNog]

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.2-64561 with ARPL-i18n 23.6.0

- Loader version and model: arpl-i18n 23.6.2 DS920+

- Using custom extra.lzma: NO

- Installation type: Proxmox VM (q35, SeaBIOS, VirtIO SCSI Single, SATA vDisks, VirtIO LAN, 4 vCPUs with CPU type set to "host", 8GB RAM)

- Additional comments:

• Upgraded bootloader to ARPL-i18n 23.6.2
• reboot
• Went back to bootloader menu and updated all addons, modules and LKMs
• Rebuilt boot loader (had to pick first the new build from the menu otherwise build will fail. No need to select again the model and serial number)
• reboot
• Follow prompt for upgrade from browser preserving all existing data and configs (Junior mode)

 

Edited June 9, 2023 by JNNog

[Sonnenblume]

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.2-64561 with ARPL-i18n 23.5.8

- Loader version and model: arpl-i18n 23.6.2 , DS920+

- Using custom extra.lzma: NO

- Installation type: Baremetal

- Additional comments: First I tried with arpl-i18-23.5.8 a manual update from 7.2.-64561, but this was unsuccesful! The NAS wasn't reachable.😮

Second I built new boot stick with actual arpl-i18 v23.6.2. Everything seems fine now.🙂

I had to reactivate ABB with new serial number.

Edited June 10, 2023 by Sonnenblume

[SuperJack]

Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962 Update 4 with automated RedPill Loader 0.5 alpha-1

- Loader version and model: TinyCore RedPill Loader v0.9.4.3-2.m-shell.img DS3622xs+ (modified: new Peter Suh files added)

- Using custom extra.lzma: NO

- Installation type: HPE MicroServer Gen10 Plus 

Additional comments:

- created modified USB bootloader v0.9.4.3-2.m-shell.img;

- select model, SN, Mac, build;

- reboot.

[Zhyryrk]

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.2-64561
- Loader version and model: TCRP v0.9.4.9a with Friend - DVA1622 (not UEFI)
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - FUJITSU D3417-B21 GS2; Intel Core i5-7500T; 8GB DDR4; 2x4TB HDD

- Additional comments: Rebuilt the bootloader and then installed DSM (.pat) during the migration procedure. 

Edited June 11, 2023 by Zhyryrk

[calimansi]

- Outcome of the update: FAILED

- DSM version prior update: DSM 7.2-64561
- Loader version and model: TCRP v0.9.4.9a with Friend - DVA1622
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - ACER; Intel J4125; 16GB DDR4; 1x1TB HDD

- Additional comments: I can log into the system and have full access to local network.  Anything over the internet is blocked.  Downgraded to 7.1.1 and I can get internet access again.

Edited June 11, 2023 by calimansi

[Jseinfeld]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962 Update 5
- Loader version and model: arpl-i18n 23.6.4  DS920+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Asrock J4105
- Additional comments: Upgraded from arpl 1.11 by flashing arpl-i8n image onto USB. Didn't get prompt to migrate from old install. Had to setup everything again.

[keqas78]

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.2-64561 (TCRP v0.9.4.6 with Friend 0.0.5 - DS3622xs+)
- Loader version and model: TCRP v0.9.4.9 with Friend 0.0.5j - DS3622xs+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP ProLiant MicroServer Gen8

- Additional comments:

1. Booted to Tiny Core Image Build: Full Upgrade of loader (TCRP v0.9.4.6 -> v0.9.4.9)

./rploader.sh clean
./rploader.sh update
./rploader.sh fullupgrade
exitcheck.sh reboot

2. On next start TCRP Friend was updated automatically (TCRP Friend 0.0.5 -> 0.0.5j)

3. DSM Control Panel: Update DSM 7.2-64561 -> 7.2-64570

4. Reboot

[Buny74]

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.2-64561

- Previous Loader version and model: ARPL-i18n / DS3622xs+ / 23.5.8

- New Loader version and model: ARPL-i18n / DS3622xs+ / 23.6.4
- Using custom extra.lzma: NO
- Installation type: Baremetal - HP MicroServer Gen 8

- Additional comments: 

1. Update via GUI to 7.2-64570

2. Reboot to ARPL and updated ARPL to latest version

3. Reboot to the updated ARPL, choose model addons and rebuild the loader

4. Boot the loader and the update was successfully installed

 

Edited June 12, 2023 by Buny74

[merve04]

- Outcome of the update: SUCCESSFUL
- DSM version prior to update: DSM 7.1.1-42962 Update 5
- Loader version and model prior to update: TCRP v0.9.4.3-2 w\Friend 0.0.6 (DVA1622)

- Loader version and model after update: TCRP v0.9.4.3-2 w\Friend 0.0.8 (DVA1622)
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Gigabyte B365-DS3H, i5-8400, 8x12TB, 2x4TB
- Additional comments: Updated via DSM GUI, rebooted, Synology Assistant reported "not installed". I suspect its because TCRP w\Friend reports NO IP during boot and cant perform the upgrade. Booted in TCRP and let it update to latest version, looks like it brought me up to 0.0.8, and let it reboot again, back in DSM now.

 

*It seems odd that the loader builder screen has no problems obtaining an IP but when it boots, no IP . Is this a driver issue?

Edited June 12, 2023 by merve04

[zoulou13]

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42962 Update 2

- Previous Loader version and model: ARLP v0.5-alpha1 / DS3622xs+ 

- New Loader version and model: ARPL-i18n - 26.6.3 / DS3622xs+ 
- Using custom extra.lzma: NO
- Installation type VM: ESXI - 6.5

[The Chief]

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.1.1-42962 Update 5

- Previous Loader version and model: ARPL 1.1-beta2 / DS918+ 

- New Loader version and model: ARPL-i18n 23.6.2 / DS918+
- Using custom extra.lzma: NO
- Installation type: Baremetal (Asrock J3355B-ITX)
- Additional comments: ARPL-i18n 23.6.3 and 23.6.4 Realtek LAN support is broken, it works in bootloader, but no LAN after DSM starts.

 

[ovel2clock]

- Outcome of the update: SUCCESSFUL

- DSM version prior update:  DSM 7.2-64561

- Previous Loader version and model: TCRP v0.9.4.9a with Friend 0.0.5j / DS3622xs+

- New Loader version and model: TCRP v0.9.4.9a with Friend 0.0.5j / DS3622xs+
- Using custom extra.lzma: NO
- Installation type: Proxmox VM
- Additional comments: 

1. Booted to Tiny Core Image Build: Full Upgrade of loader (TCRP v0.9.4.6 -> v0.9.4.9)

./rploader.sh clean 
./rploader.sh update 
./rploader.sh fullupgrade
reboot

2. DSM Control Panel: Update DSM 7.2-64561 -> 7.2-64570

3. Reboot

[spld]

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.2-64561 to DSM7.2-64570
- Loader version and model: ARPL-i18n 23.6.4 / DS3622xs+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - E3 1260L v5 + SuperMicro X11SSH-LN4F

- Additional comments: Rebuilt the bootloader (edit Sn, Mac1), compile and reboot, then installed DSM (.pat) 

[bladerider]

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Fresh install
- Loader version and model: ARPL-i18n 23.6.4 / DS3622xs+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL -Intel Xeon X3440 + Intel Server Board S3420GPLC + Marvell 88SE9215 SATA 4 Port PCIE Card + NEC chipset dual port USB 3.0 PCIE card

- Additional comments: Rebuilt the bootloader, compile and reboot, then installed DSM (.pat), all SATA ports are working as intended, same goes to the USB 3.0 port

Edited June 18, 2023 by bladerider
update the additional comments

[dmtg]

- Outcome of the update: SUCCESSFUL

- DSM version prior update: ARC 23.6.40a DS3622xs+ DSM 7.2 64570

- Loader version and model: ARPL v1.0-beta13 DS3615xs DSM 7.1 Update 4

- Installation type: HPE Microserver Gen 8 

[wirgen]

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 7.1.1-42962 Update 6
- Loader version and model: ARPL-i18n 23.6.4 (DS920+)
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - ASRock J4125
- Additional comments: Rebuilt the bootloader, manually uploaded PAT-file

[ngoc son]

Outcome of the update: SUCCESSFUL

- DSM version prior update: 7.2-64570 Update 1

- Loader version and model: arpl-i18n-23.6.8 , DS920+

- Using custom extra.lzma: NO

- Additional comments: 

Mainboard j2900:

INTEL Celeron J4125 2.41 GHz

Ram 4GB

 

[Flautista1988]

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 7.2-64561 ( arpl-i18n 23.5.8)

- Loader version and model:  DS3622xs+ - arpl-i18n 23.6.3

- Using custom extra.lzma: NO

- Installation type: BAREMETAL

- Additional comments: USB loader, updated and rebuilded with arpl-i18n 23.6.3 using NAS ip:7681 interface

[AlexR]

Результат : успешно

DSM 7.2-64561 (arc 24.3.2)

Dsm 918+ + arc 24.3.2

Baremetall i3 8300, gygabite b360 d3s, дискретная сетевая карта tplink-3468 v2. На встроеной realtek 8111 работает нестабильно, пропадает из сети рандомно. 

Установка вместе с arc patch, quick connect работает, ame codec + videostation не работает, plex работает отлично.