Jump to content
XPEnology Community
  • 0

No IP on baremetal (TCRP DS3622xs+)


trublu
 Share

Question

Posted (edited)

I've tried searching but can't seem to find any posts about a similar issue.

 

Hardware:

Motherboard with UEFi disabled: SUPERMICRO MBD-X10SDV-TLN4F-O D-1541 (2 x 10 GbE LAN & 2 x Intel i350-AM2 GbE LAN)

LSI HBA with 8 HDDs (onboard STA controllers disabled)


Used the above with Jun's mod for DSM 6.X with no issues. However, after booting up TCRP, everything looks fine except I can't get a network connection.

 

The process I used is below:

 

./rploader.sh update now
./rploader.sh fullupgrade now
./rploader.sh identifyusb now
./rploader.sh serialgen DS3622xs+ realmac now

At this point I edited user_config.json to add additional 3 NICs before continuing.

./rploader.sh satamap
./rploader.sh build broadwellnk-7.1.0-42661

Edited by trublu
Link to comment
Share on other sites

18 answers to this question

Recommended Posts

  • 0
17 minutes ago, flyride said:

Try assigning MAC to the lowest-ordered 1 Gbe port.  You might need to look at the mobo manual to be certain which it is.

 

No need to add the other addresses.

 

I haven't come across this term before. In a case where the 1Gbe ports are LAN1 & LAN2, does this simply mean going with the LAN1 port? Thanks!

Link to comment
Share on other sites

  • 0
Posted (edited)
56 minutes ago, flyride said:

Yes

Thanks, that certainly put me on the right track because now I can see (via the router) that the server now acquires an IP, however, I can't find it via Synology Assistant and going directly to http://<serverIP>:5000 times out. After a while the server also loses the IP.

 

EDIT: I was wrong about the server acquiring an IP. After rebooting, it appears it was simply the IP for tiny core which wasn't released for a few minutes.


Anything else you think I should try? Thanks.

Edited by trublu
Link to comment
Share on other sites

  • 0

Serial console is always helpful to see what is going on. EDIT: your Supermicro probably supports serial redirection so you might be able to view the serial output from a Java console launched via the IPMI.

 

Are you certain the loader is compiling without errors?

 

If you have an Intel CT (e1000e) card you could drop that in temporarily see if you can find what is going wrong with the i350.

Link to comment
Share on other sites

  • 0
Posted (edited)
login as: tc
tc@192.168.0.54's password:
   ( '>')
  /) TC (\   Core is distributed with ABSOLUTELY NO WARRANTY.
 (/-_--_-\)           www.tinycorelinux.net

tc@box:~$ ./rploader.sh clean now
Clearing local redpill files
tc@box:~$ ./rploader.sh update now
Checking Internet Access -> OK
Checking if a newer version exists on the main repo -> Version is current
tc@box:~$ ./rploader.sh fullupgrade now
Performing a full TCRP upgrade
Warning some of your local files will be moved to /home/tc/old/xxxx.2022-Jun-07-15-55
Updating custom_config.json
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 33842  100 33842    0     0   138k      0 --:--:-- --:--:-- --:--:--  138k
Updating custom_config_jun.json
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  8954  100  8954    0     0  33286      0 --:--:-- --:--:-- --:--:-- 33286
Updating global_config.json
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  5692  100  5692    0     0  23327      0 --:--:-- --:--:-- --:--:-- 23327
Updating modules.alias.3.json.gz
mv: cannot stat 'modules.alias.3.json.gz': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:--  0:00:01 --:--:--     0
100  5591  100  5591    0     0   4770      0  0:00:01  0:00:01 --:--:--  4770
Updating modules.alias.4.json.gz
mv: cannot stat 'modules.alias.4.json.gz': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 89007  100 89007    0     0   491k      0 --:--:-- --:--:-- --:--:--  491k
Updating rpext-index.json
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  211k  100  211k    0     0   635k      0 --:--:-- --:--:-- --:--:--  635k
Updating user_config.json
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   431  100   431    0     0   1803      0 --:--:-- --:--:-- --:--:--  1803
Updating dtc
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  146k  100  146k    0     0   509k      0 --:--:-- --:--:-- --:--:-- 6377k
Updating rploader.sh
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 95902  100 95902    0     0   538k      0 --:--:-- --:--:-- --:--:--  538k
Updating ds1621p.dts
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  3026  100  3026    0     0  13754      0 --:--:-- --:--:-- --:--:-- 13754
Updating ds920p.dts
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  2423  100  2423    0     0  11429      0 --:--:-- --:--:-- --:--:-- 11429
Please make sure you are using the latest 1GB img before using backup option
Current /home/tc size is 349M , try to keep it less than 1GB as it might not fit into your image
Should i update the sda with your current files [Yy/Nn]
y
Backing up home files to sda : Backing up files to /mnt/sda3//mydata.tgz
Done.

tc@box:~$ ./rploader.sh identifyusb now
Found Samsung Flash SerialNumber: 0374521101112786
Vendor ID : 0x080c Product ID : 0x1000
Should i update the user_config.json with these values ? [Yy/Nn]
y
tc@box:~$ ./rploader.sh serialgen DS3622xs+ realmac now
Serial Number for Model : 2150SQRVZMCPJ
Mac Address for Model DS3622xs+ : 00:11:32:79:67:49
Real Mac Address : AC:1F:6B:19:F0:E6
Notice : realmac option is requested, real mac will be used
Should i update the user_config.json with these values ? [Yy/Nn]
y
tc@box:~$ ./rploader.sh satamap
Found SCSI HBAs, We need to install the SCSI modules
Downloading: scsi-5.10.3-tinycore64.tcz
Connecting to repo.tinycorelinux.net (89.22.99.37:80)
saving to 'scsi-5.10.3-tinycore64.tcz'
scsi-5.10.3-tinycore 100% |********************************| 2632k  0:00:00 ETA
'scsi-5.10.3-tinycore64.tcz' saved
scsi-5.10.3-tinycore64.tcz: OK
Succesfully installed SCSI modules

No AHCI SATA ports mapped. Setting up compatibility for SCSI/SAS controller mappings.

Found SCSI/HBA "04:00.0 LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)" (0 drives)

Computed settings:
SataPortMap=1
DiskIdxMap=00

Should i update the user_config.json with these values ? [Yy/Nn] y
Done.
tc@box:~$ vi user_config.json
tc@box:~$ ./rploader.sh build broadwellnk-7.1.0-42661
Rploader Version : 0.8.0.2
Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : develop
Redpill module source : https://github.com/pocopico/redpill-lkm.git : Redpill module branch : master
Extensions :   redpill-misc
Extensions URL : "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json"
TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.broadwellnk-7.0.dev.txz/download
TOOLKIT_SHA : 0d9edca67d9e7e14c2529bbb58341b623936124d5264f71f1e4acbacf3ea202d
SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/broadwellnk-source/linux-4.4.x.txz/download
SYNOKERNEL_SHA : d3e85eb80f16a83244fcae6016ab6783cd8ac55e3af2b4240455261396e1e1be
COMPILE_METHOD : toolkit_dev
TARGET_PLATFORM       : broadwellnk
TARGET_VERSION    : 7.1.0
TARGET_REVISION : 42661
REDPILL_LKM_MAKE_TARGET : dev-v7
KERNEL_MAJOR : 4
MODULE_ALIAS_FILE :  modules.alias.4.json
SYNOMODEL : ds3622xsp_42661
MODEL : DS3622xs+
Local Cache Folder : /mnt/sda3/auxfiles
DATE Internet : 07062022 Local : 07062022
Checking Internet Access -> OK
Checking if a newer version exists on the main repo -> Version is current
Cloning into 'redpill-lkm'...
remote: Enumerating objects: 1253, done.
remote: Counting objects: 100% (325/325), done.
remote: Compressing objects: 100% (41/41), done.
remote: Total 1253 (delta 302), reused 284 (delta 283), pack-reused 928
Receiving objects: 100% (1253/1253), 469.84 KiB | 7.96 MiB/s, done.
Resolving deltas: 100% (865/865), done.
Cloning into 'redpill-load'...
remote: Enumerating objects: 2022, done.
remote: Counting objects: 100% (28/28), done.
remote: Compressing objects: 100% (24/24), done.
remote: Total 2022 (delta 8), reused 20 (delta 4), pack-reused 1994
Receiving objects: 100% (2022/2022), 114.71 MiB | 73.27 MiB/s, done.
Resolving deltas: 100% (945/945), done.
No extra build option or static specified, using default <static>
Using static compiled redpill extension
Removing any old redpill.ko modules
Looking for redpill for : ds3622xsp_42661
Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-4.4.180plus-broadwellnk.tgz
Extracting module
Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/src/check-redpill.sh
Got redpill-linux-v4.4.180+.ko
Testing modules.alias.4.json -> File OK
------------------------------------------------------------------------------------------------
It looks that you will need the following modules :


[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbe/rpext-index.json...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbe/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] ========================================== pocopico.ixgbe ==========================================
[#] Extension name: ixgbe
[#] Description: Adds Intel(R) 10GbE PCI Express Linux Network Driver Support
[#] To get help visit: <todo>
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/ixgbe
[#] Software author: https://github.com/pocopico
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbe/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================

Found Ethernet Interface : pciid 8086d000015ad Required Extension : ixgbe
Searching for matching extension for ixgbe
Found matching extension :
"https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbe/rpext-index.json"
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbe/rpext-index.json...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbe/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%

[!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.ixgbe/pocopico.ixgbe.json). For more info use "ext-manager.sh info pocopico.ixgbe"

*** Process will exit ***
Found Ethernet Interface : pciid 8086d000015ad Required Extension : ixgbe
Searching for matching extension for ixgbe
Found matching extension :
"https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbe/rpext-index.json"
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] ========================================== pocopico.mpt3sas ==========================================
[#] Extension name: mpt3sas
[#] Description: Adds LSI MPT Fusion SAS 3.0 Device Driver Support
[#] To get help visit: <todo>
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/mpt3sas
[#] Software author: https://github.com/pocopico
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================

Found SAS Controller : pciid 1000d00000072  Required Extension : mpt3sas
Searching for matching extension for mpt3sas
Found matching extension :
"https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json"
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%
[OK]
[#] ========================================== pocopico.igb ==========================================
[#] Extension name: igb
[#] Description: Adds Intel(R) Gigabit Ethernet Network Driver Support
[#] To get help visit: <todo>
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/igb
[#] Software author: https://github.com/pocopico
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================

Found Ethernet Interface : pciid 8086d00001521 Required Extension : igb
Searching for matching extension for igb
Found matching extension :
"https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json"
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################## 100.0%

[!] Extension is already added (index exists at /home/tc/redpill-load/custom/extensions/pocopico.igb/pocopico.igb.json). For more info use "ext-manager.sh info pocopico.igb"

*** Process will exit ***
Found Ethernet Interface : pciid 8086d00001521 Required Extension : igb
Searching for matching extension for igb
Found matching extension :
"https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json"
Found VGA Controller : pciid 1a03d00002000  Required Extension : ast
Searching for matching extension for ast
------------------------------------------------------------------------------------------------
Starting loader creation
Found tinycore cache folder, linking to home/tc/custom-module
Checking user_config.json : Done
Entering redpill-load directory
Removing bundled exts directories
Cache directory OK
Found build request for revision greater than 42218
Found extractor locally cached
Copying required libraries to local lib directory
Linking lib to lib64
Copying executable
Removing temp folder /tmp/synoesp
Checking if tool is accessible
/bin/syno_extract_system_patch: /usr/local/lib/libcurl.so.4: no version information available (required by /bin/syno_extract_system_patch)
Executed succesfully
Creating temp folder /tmp/pat
Checking for cached pat file
Found tinycore cache folder, linking to home/tc/custom-module
Found locally cached pat file /home/tc/custom-module/ds3622xsp_42661.pat
File /home/tc/custom-module/ds3622xsp_42661.pat, is a compressed tar
File /home/tc/custom-module/ds3622xsp_42661.pat is already unencrypted
Copying file to /home/tc/redpill-load/cache folder
./VERSION
Pat file  sha256sum is : 952ee1ff8db6b9afd9dce0593c5fbdf49a199998b604058ccd6c1b9a47791e9f
Checking config file existence -> OK
Editing config file -> Verifying config file -> OK !
Clearing temp folders
Processing add_extensions entries found on custom_config.json file :   redpill-misc
Adding extension "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json"
[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%
[OK]
[#] ========================================== redpill-misc ==========================================
[#] Extension name: Misc shell
[#] Description: Misc shell
[#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc
[#] Update URL: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================

Updating extension : redpill-misc contents for model : ds3622xsp_42661
[#] Checking runtime for required tools... [OK]
[#] Updating ds3622xsp_42661 platforms extensions...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################### 100.0%

[#] Filling-in newly downloaded recipe for extension redpill-misc platform ds3622xsp_42661
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/install.sh
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/install.sh file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install-all.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/install-all.sh
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/install-all.sh file...  [OK]
[#] Downloading remote file https://github.com/tsl0922/ttyd/releases/download/1.6.3/ttyd.x86_64 to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/ttyd
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/ttyd file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install_rd.sh to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/install_rd.sh
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/install_rd.sh file...  [OK]
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/lrzsz.tar.gz
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/lrzsz.tar.gz file...  [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/...  [OK]
[#] Successfully processed recipe for extension redpill-misc platform ds3622xsp_42661
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-misc/ds3622xsp_42661/...  [OK]
[#] Checking runtime for required tools... [OK]
[#] Updating extensions...

[#] Checking runtime for required tools... [OK]
[#] Adding new extension from https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json...
[#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%
[OK]
[#] ========================================== redpill-boot-wait ==========================================
[#] Extension name: RedPill Bootwait
[#] Description: Simple extension which stops the execution early waiting for the boot device to appear
[#] To get help visit: https://github.com/pocopico/rp-ext/redpill-boot-wait
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/redpill-boot-wait
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds2422p_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds920p_42550 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================

[#] Checking runtime for required tools... [OK]
[#] Updating pocopico.igb extension...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%

[#] Extension pocopico.igb index is already up to date
[#] Updating pocopico.ixgbe extension...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbe/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%

[#] Extension pocopico.ixgbe index is already up to date
[#] Updating pocopico.mpt3sas extension...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%

[#] Extension pocopico.mpt3sas index is already up to date
[#] Updating redpill-boot-wait extension...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%

[#] Extension redpill-boot-wait index is already up to date
[#] Updating redpill-misc extension...
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json
######################################################################### 100.0%
[OK]
[#] Checking runtime for required tools... [OK]
[#] Updating ds3622xsp_42661 platforms extensions...
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/releases/ds3622xsp_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################### 100.0%

[#] Filling-in newly downloaded recipe for extension pocopico.igb platform ds3622xsp_42661
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/releases/igb-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds3622xsp_42661/igb-4.4.180plus-broadwellnk.tgz
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.igb/ds3622xsp_42661/igb-4.4.180plus-broadwellnk.tgz file... [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.igb/ds3622xsp_42661/igb-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds3622xsp_42661/... [OK]
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/igb/src/check-igb.sh to /home/tc/redpill-load/custom/extensions/pocopico.igb/ds3622xsp_42661/check-igb.sh
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.igb/ds3622xsp_42661/check-igb.sh file... [OK]
[#] Successfully processed recipe for extension pocopico.igb platform ds3622xsp_42661
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbe/releases/ds3622xsp_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################### 100.0%
[#] Filling-in newly downloaded recipe for extension pocopico.ixgbe platform ds3622xsp_42661
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbe/releases/ixgbe-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.ixgbe/ds3622xsp_42661/ixgbe-4.4.180plus-broadwellnk.tgz
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.ixgbe/ds3622xsp_42661/ixgbe-4.4.180plus-broadwellnk.tgz file... [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.ixgbe/ds3622xsp_42661/ixgbe-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.ixgbe/ds3622xsp_42661/... [OK]
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/ixgbe/src/check-ixgbe.sh to /home/tc/redpill-load/custom/extensions/pocopico.ixgbe/ds3622xsp_42661/check-ixgbe.sh
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.ixgbe/ds3622xsp_42661/check-ixgbe.sh file... [OK]
[#] Successfully processed recipe for extension pocopico.ixgbe platform ds3622xsp_42661
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/releases/ds3622xsp_42218.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################### 100.0%
[#] Filling-in newly downloaded recipe for extension pocopico.mpt3sas platform ds3622xsp_42661
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/releases/mpt3sas-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.mpt3sas/ds3622xsp_42661/mpt3sas-4.4.180plus-broadwellnk.tgz
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.mpt3sas/ds3622xsp_42661/mpt3sas-4.4.180plus-broadwellnk.tgz file... [OK]
[#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.mpt3sas/ds3622xsp_42661/mpt3sas-4.4.180plus-broadwellnk.tgz to /home/tc/redpill-load/custom/extensions/pocopico.mpt3sas/ds3622xsp_42661/... [OK]
[#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/src/check-mpt3sas.sh to /home/tc/redpill-load/custom/extensions/pocopico.mpt3sas/ds3622xsp_42661/check-mpt3sas.sh
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.mpt3sas/ds3622xsp_42661/check-mpt3sas.sh file... [OK]
[#] Successfully processed recipe for extension pocopico.mpt3sas platform ds3622xsp_42661
[#] Downloading remote file https://github.com/RedPill-TTG/redpill-boot-wait/raw/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################### 100.0%
[#] Filling-in newly downloaded recipe for extension redpill-boot-wait platform ds3622xsp_42661
[#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds3622xsp_42661/boot-wait.sh
######################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds3622xsp_42661/boot-wait.sh file... [OK]
[#] Successfully processed recipe for extension redpill-boot-wait platform ds3622xsp_42661
[#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
######################################################################### 100.0%
[#] Extension redpill-misc for ds3622xsp_42661 platform is already up to date
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds3622xsp_42661/boot-wait.sh file... [OK]
[#] Updating extensions... [OK]
[#] Verifying /home/tc/redpill-load/cache/ds3622xsp_42661.pat file... [OK]
[#] Unpacking /home/tc/redpill-load/cache/ds3622xsp_42661.pat file to /home/tc/redpill-load/build/1654617555/pat-ds3622xsp_42661-unpacked... [OK]
[#] Verifying /home/tc/redpill-load/build/1654617555/pat-ds3622xsp_42661-unpacked/zImage file... [OK]
[#] Patching /home/tc/redpill-load/build/1654617555/pat-ds3622xsp_42661-unpacked/zImage to /home/tc/redpill-load/build/1654617555/zImage-patched... [OK]
[#] Verifying /home/tc/redpill-load/build/1654617555/pat-ds3622xsp_42661-unpacked/rd.gz file... [OK]
[#] Unpacking /home/tc/redpill-load/build/1654617555/pat-ds3622xsp_42661-unpacked/rd.gz file to /home/tc/redpill-load/build/1654617555/rd-ds3622xsp_42661-unpacked... [OK]
[#] Apply patches to /home/tc/redpill-load/build/1654617555/rd-ds3622xsp_42661-unpacked... [OK]
[#] Patching config files in ramdisk... [OK]
[#] Adding OS config patching... [OK]
[#] Repacking ramdisk to /home/tc/redpill-load/build/1654617555/rd-patched-ds3622xsp_42661.gz... [OK]
[#] Bundling extensions... [#] Checking runtime for required tools... [OK]
[#] Dumping ds3622xsp_42661 platform extensions to /home/tc/redpill-load/build/1654617555/custom-initrd/exts... [OK]
[#] Packing custom ramdisk layer to /home/tc/redpill-load/build/1654617555/custom.gz... [OK]
[#] Generating GRUB config... [OK]
[#] Creating loader image at loader.img... [OK]
[#] Cleaning up... [OK]
Mounting /dev/sda1 to localdiskp1
/dev/sda2 localdiskp2
Creating tinycore entry
menuentry 'Tiny Core Image Build' {
        savedefault
        set root=(hd0,msdos3)
        echo Loading Linux...
        linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791
        echo Loading initramfs...
        initrd /corepure64.gz
        echo Booting TinyCore for loader creation
}
Entries in Localdisk bootloader :
=======================================================================
menuentry 'RedPill DS3622xs v7.1.0-42661 Beta (USB, Verbose)' {
menuentry 'RedPill DS3622xs v7.1.0-42661 Beta (SATA, Verbose)' {
menuentry 'Tiny Core Image Build' {
Caching files for future use
No adequate space on TCRP loader partition /mnt/sda3 to cache pat file
Found /mnt/sda3/auxfiles/ds3622xsp_42661.pat file
Do you want me to remove older cached pat files and cache current ? [yY/nN] : Saving user session for future use. Saving current extensions  -> OK !
Saving current user_config.json  -> OK !
tc@box:~$ exitcheck.sh reboot
tc@box:~$


 

Edited by trublu
Link to comment
Share on other sites

  • 0

The compile looks good, although I am not sure what device you are booting TinyCore from as you have no SATA disks and nothing apparently attached to the HBA? (EDIT: obviously booting form USB)

 

Odds are that the loader is kernel panicking on boot for some reason.  Serial console will help with that.

Link to comment
Share on other sites

  • 0
10 minutes ago, flyride said:

The compile looks good, although I am not sure what device you are booting TinyCore from as you have no SATA disks and nothing apparently attached to the HBA? (EDIT: obviously booting form USB)

 

Odds are that the loader is kernel panicking on boot for some reason.  Serial console will help with that.

Thanks, I'll look into getting the serial console output

Link to comment
Share on other sites

  • 0

Yeah, you should see a lot more than that.  Not much to diagnose with there.

 

Hopefully someone else has some ideas too.

 

I would get down to simple.  Disable 10Gbe controllers and one of your 1 Gbe adapters.  Get a SATA disk and get a basic DSM install going with that.  Then gradually add in the other components until you find the one that is misbehaving.

 

Sorry I don't have better suggestions but there isn't much here to go on.

Link to comment
Share on other sites

  • 0

Serial console displays the kernel message (what normally is visible in dmesg) and alerts from the loader.  Lots of examples on the forum.

 

Like I said, I'd try simple.  Maybe download a new clean non-UEFI loader and try again.  If all else fails, consider virtualizing.

Link to comment
Share on other sites

  • 0
1 hour ago, flyride said:

Serial console displays the kernel message (what normally is visible in dmesg) and alerts from the loader.  Lots of examples on the forum.

 

Like I said, I'd try simple.  Maybe download a new clean non-UEFI loader and try again.  If all else fails, consider virtualizing.

yeah, I may have to go the virtualization route. For now though, does the attached output provide any clues?

 

iKVM_capture.jpg

Link to comment
Share on other sites

  • 0
On 6/8/2022 at 3:21 PM, flyride said:

No, that is all that ever will be displayed on a VGA console.  Thus, the need for a serial console if troubleshooting is required.

 

 

Hey, I tried switching back to my untouched 6.X loader but now I'm not getting an IP. Do you know what could be the issue? I wasn't able to get far enough with TCRP to install DSM7 so I'm stumped on what might have happened.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...