mar1boro Posted September 3, 2023 Share #301 Posted September 3, 2023 On 8/30/2023 at 5:37 PM, RedwinX said: Hello ! I can tell that someone found the solution with loader SA6400 with kernel 5.10 Integrated gpu from 11th to 13gen is working fine, and CPU too^^. Backport and integration of i915 is working just fine actually where to read about it? are files available to try? Quote Link to comment Share on other sites More sharing options...
RedwinX Posted September 3, 2023 Share #302 Posted September 3, 2023 5 minutes ago, mar1boro said: where to read about it? are files available to try? https://blog.jim.plus/blog/post/jim/synology-sa6400-with-i915 1 Quote Link to comment Share on other sites More sharing options...
mar1boro Posted September 3, 2023 Share #303 Posted September 3, 2023 21 minutes ago, RedwinX said: https://blog.jim.plus/blog/post/jim/synology-sa6400-with-i915 So you have tested it for a month already, right? Is it stable? did it fix the reboots for your hardware? Quote Link to comment Share on other sites More sharing options...
RedwinX Posted September 3, 2023 Share #304 Posted September 3, 2023 2 hours ago, mar1boro said: So you have tested it for a month already, right? Is it stable? did it fix the reboots for your hardware? Yep. The random reboot was not the loader but my motherboard (hardware pb). Since I changed it, no problems at all... 2 1 Quote Link to comment Share on other sites More sharing options...
sebigeli Posted December 7, 2023 Share #305 Posted December 7, 2023 On 4/10/2022 at 2:18 PM, blackmanga said: i915 drivers for various models and scripts. I have tested them on DS 918+ and can confirm that /dev/dri exists and HW transcoding works perfectly (even HDR tonemapping works with the linuxserver/plex docker) DS918+ DSM 7 https://www.filehosting.org/file/details/3054890/i915.7z https://www104.zippyshare.com/v/oPItjx82/file.html https://dailyuploads.net/41tops2ix61g DS920+ DSM 7 https://dailyuploads.net/iiafmtyxq2si https://www74.zippyshare.com/v/NPbJM27X/file.html DS3622+ DSM 7 https://dailyuploads.net/avd0bpv3ejw0 https://www100.zippyshare.com/v/i1ha0qjo/file.html Attached the scripts as well to remove original modules (rm_modules.sh) in a running DSM system, and then insert the new modules (in_modules.sh). All modules are for kernel 4.4.180+ If someone would like to compile their own modules, you would need to patch the files in linux.4.4.x source files. The i915.patch file is to be placed in linux.4.4.x folder of the GPL source. (you can do a dry run to see if there are any errors first: patch -p0 --verbose --dry-run < i915.patch ) If everything looks ok, you can run the following command patch -p0 --verbose -b < i915.patch after this, you just cross compile the modules as usual. in_modules.sh 203 B · 202 downloads rm_modules.sh 183 B · 182 downloads i915.patch 7.13 kB · 186 downloads Hello, I have a DS3622XS+ with DSM 7.2.1-69057 Update 3, installed with Arc Loader, It running on a mini pc with I5 7500T and I need to deploy a Windows VM with GPU passthrough. Is it possible ? When the driver are installed (if it's compatible), how to tell windows vm to use intel hd graphics 630. Thanks ! Quote Link to comment Share on other sites More sharing options...
Orphée Posted December 7, 2023 Share #306 Posted December 7, 2023 (edited) 45 minutes ago, sebigeli said: Hello, I have a DS3622XS+ with DSM 7.2.1-69057 Update 3, installed with Arc Loader, It running on a mini pc with I5 7500T and I need to deploy a Windows VM with GPU passthrough. Is it possible ? When the driver are installed (if it's compatible), how to tell windows vm to use intel hd graphics 630. Thanks ! Just switch to DS918+ loader... it is genuine supported with your iGPU. Why do you want to hack DS3622xs+ when DS918+ is working just fine as long as you know how to iGPU passthrough ? You expect to passtrough the iGPU from DSM to a Windows VM using VMM from Synology ? I don't know if VMM is able to do it. Edited December 7, 2023 by Orphée Quote Link to comment Share on other sites More sharing options...
sebigeli Posted December 7, 2023 Share #307 Posted December 7, 2023 (edited) 4 minutes ago, Orphée said: Just switch to DS918+ loader... it is genuine supported with your iGPU. Why do you want to hack DS3622xs+ when DS918+ is working just fine as long as you know how to iGPU passthrough ? You expect to passtrough the iGPU from DSM to a Windows VM using VMM from Synology ? I don't know if VMM is able to do it. Oh ok, the DS918+ is compatible to mount a storage from usb HDD ? support nvme disk as internal storage ? Arf... if VMM is not compatible, I will go to proxmox with DSM VM but I prefer with a DSM on a baremetal... the gpu passthrough is only for container ? Edited December 7, 2023 by sebigeli Quote Link to comment Share on other sites More sharing options...
Orphée Posted December 7, 2023 Share #308 Posted December 7, 2023 Just now, sebigeli said: Oh ok, the DS918+ is compatible to mount a storage from usb HDD ? support nvme disk as internal storage ? Arf... if VMM is not compatible, I will go to proxmox with DSM VM but I prefer with a DSM on a baremetal... If you really need to have a Windows VM with an iGPU and you know Proxmox... Don't bother with VMM... https://community.synology.com/enu/forum/1/post/135055 Quote Link to comment Share on other sites More sharing options...
sebigeli Posted December 7, 2023 Share #309 Posted December 7, 2023 Just now, Orphée said: If you really need to have a Windows VM with an iGPU and you know Proxmox... Don't bother with VMM... https://community.synology.com/enu/forum/1/post/135055 ok, that bothers me because I already have a cluster with two proxmox hosts. I'm doing gpu passthrough for a windows vm on one and on the second it's disabled to be able to mount the gpu on an lxc Plex container, except that I want redundancy in the event of a host failure on the container part LXC, except that the GPU passthrough will no longer work on the VM... That's why, I would like to have my administration VM, 3D modeling on my 3rd host. (the “NAS”) Quote Link to comment Share on other sites More sharing options...
Orphée Posted December 7, 2023 Share #310 Posted December 7, 2023 Synology may not be your best choice then. Quote Link to comment Share on other sites More sharing options...
sebigeli Posted December 7, 2023 Share #311 Posted December 7, 2023 16 minutes ago, Orphée said: Synology may not be your best choice then. I prefer a lot of Qnap but it's not free... Quote Link to comment Share on other sites More sharing options...
Orphée Posted December 7, 2023 Share #312 Posted December 7, 2023 (edited) Neither is Synology 😆 Truenas maybe an option if it handle GPU passthrough to qemu VMs... Edited December 7, 2023 by Orphée Quote Link to comment Share on other sites More sharing options...
sebigeli Posted December 7, 2023 Share #313 Posted December 7, 2023 managing volumes and sharing is not as simple as on DSM, I don't want to worry about this part, I have my PVEs to have fun with. Quote Link to comment Share on other sites More sharing options...
huzzyz Posted December 27, 2023 Share #314 Posted December 27, 2023 (edited) Hello, I am running DS918+, DSM 7.2.1-69057 on an Intel i5-10210U. I've tried going through the various threads but couldn't grasp, could someone please tell me how can I install the patched modules to get /dev/dri to show up? I've installed via v0.10.0.0. huzzyz@nuc918:/usr/lib/firmware/i915$ lsmod | grep i915 i915 1314764 0 drm_kms_helper 123302 1 i915 drm 313498 2 i915,drm_kms_helper iosf_mbi 4298 1 i915 fb 35077 2 i915,drm_kms_helper video 27424 1 i915 backlight 6170 2 i915,video i2c_algo_bit 5876 1 i915 button 5161 1 i915 ps: Device ID is 9B41 Thank you in advance. Edited December 27, 2023 by huzzyz Quote Link to comment Share on other sites More sharing options...
gazumping Posted January 7 Share #315 Posted January 7 On 4/9/2022 at 8:16 AM, blackmanga said: I have managed to compile the i915.ko module (and associated modules) for Intel 10th Gen CPUs (i.e. 9BC8 etc.) Tested and working on DS918+ 7.0.1-42218 up3; Redpill loader on baremetal instance. The patched i915 module from IG88 had issues and would end up in a hardlockup/kernel panic for me. For anyone who wants to test, i have attached the compiled modules. https://www.filehosting.org/file/details/3054890/i915.7z https://www104.zippyshare.com/v/oPItjx82/file.html https://dailyuploads.net/41tops2ix61g Sadly none of these links work anymore - does anyone have the DS918+ 10th Gen 9BC8 i915.ko somewhere else? (or updated for 7.2 if that's relevant) Much appreciated. Quote Link to comment Share on other sites More sharing options...
blackmanga Posted January 13 Author Share #316 Posted January 13 On 1/8/2024 at 5:52 AM, gazumping said: Sadly none of these links work anymore - does anyone have the DS918+ 10th Gen 9BC8 i915.ko somewhere else? (or updated for 7.2 if that's relevant) Much appreciated. Resharing the links. Added DSM 7.2 files as well DSM 918+ https://www.mediafire.com/file/z3nxpvijr55fueb/i915_918_7.0.7z/file https://www.mediafire.com/file/otdft7xoitiutxo/i915_918_7.2-striped.7z/file DSM 920+ https://www.mediafire.com/file/qjm717fny19b891/i915_920_7.0.7z/file https://www.mediafire.com/file/r94cz9no2y6s54c/i915_920_7.2_striped.7z/file in_modules.sh rm_modules.sh Quote Link to comment Share on other sites More sharing options...
oz666 Posted January 16 Share #317 Posted January 16 Hello community , I'm having some issues with HW transcoding and need some clarifications System: DSM918+ OS: Synology DSM 7.2.1-69057 update 3 Loader : ARC 24.1.6 Hardware: unknown vendor, bought from Aliexpress. CPU N5095 with integrated GPU, 12SATA ports (used 5), 2 NICs. BIOS from AMI, project W-N95-R build 20.09.2022 From what I see, N5095 is JasperLake generation 11. Is this currently supported by DSM 7.2 ? I can see the GPU in Plex Transcoder settings (JasperLake). I have a HVEC 10 bit file used for testing. If I select transcode from the plex menu (web) it keeps loading, system CPU spikes and gets a bit unresponsive..and nothing, no play. root@b443vpn:~# cat /sys/kernel/debug/dri/0/i915_frequency_info Video Turbo Mode: yes HW control enabled: yes SW control enabled: no PM IER=0x00000000 IMR=0x00000000 ISR=0x00000000 IIR=0x00000000, MASK=0x00003ffe pm_intrmsk_mbz: 0x80000000 GT_PERF_STATUS: 0x00c0610f Render p-state ratio: 97 Render p-state VID: 15 Render p-state limit: 255 RPSTAT1: 0x06000006 RPMODECTL: 0x00000d92 RPINCLIMIT: 0x00002c88 RPDECLIMIT: 0x00004fb0 RPNSWREQ: 200MHz CAGF: 200MHz RP CUR UP EI: 4692 (6256us) RP CUR UP: 0 (0us) RP PREV UP: 0 (0us) Up threshold: 95% RP CUR DOWN EI: 4698 (6264us) RP CUR DOWN: 0 (0us) RP PREV DOWN: 0 (0us) Down threshold: 85% Lowest (RPN) frequency: 200MHz Nominal (RP1) frequency: 450MHz Max non-overclocked (RP0) frequency: 750MHz Max overclocked frequency: 750MHz Current freq: 200 MHz Actual freq: 200 MHz Idle freq: 200 MHz Min freq: 200 MHz Boost freq: 750 MHz Max freq: 750 MHz efficient (RPe) frequency: 300 MHz Current CD clock frequency: 24000 kHz Max CD clock frequency: 675000 kHz Max pixel clock frequency: 675000 kHz root@b443vpn:~# lspci -tvnnq -+-[0001:03]---00.0 Intel Corporation I211 Gigabit Network Connection [8086:1539] +-[0001:02]---00.0 Intel Corporation I211 Gigabit Network Connection [8086:1539] +-[0001:01]---00.0 Marvell Technology Group Ltd. 88SE9215 PCIe 2.0 x1 4-port SATA 6 Gb/s Controller [1b4b:9215] +-[0001:00]-+-12.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SATA AHCI Controller [8086:5ae3] | +-13.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #1 [8086:5ad8] | +-14.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port B #1 [8086:5ad6] | +-15.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series USB xHCI [8086:5aa8] | +-16.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #1 [8086:5aac] | +-18.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #1 [8086:5abc] | +-19.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #3 [8086:5ac6] | +-19.2 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #3 [8086:5ac6] | +-1f.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller [8086:5ad4] | \-1f.1 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller [8086:5ad4] \-[0000:00]-+-00.0 Intel Corporation Device [8086:4e24] +-02.0 Intel Corporation JasperLake [UHD Graphics] [8086:4e55] +-04.0 Intel Corporation Dynamic Tuning service [8086:4e03] +-08.0 Intel Corporation Device [8086:4e11] +-14.0 Intel Corporation Device [8086:4ded] +-14.2 Intel Corporation Device [8086:4def] +-15.0 Intel Corporation Serial IO I2C Host Controller [8086:4de8] +-15.2 Intel Corporation Device [8086:4dea] +-16.0 Intel Corporation Management Engine Interface [8086:4de0] +-17.0 Intel Corporation Device [8086:4dd3] +-19.0 Intel Corporation Device [8086:4dc5] +-19.1 Intel Corporation Device [8086:4dc6] +-1c.0-[01]----00.0 JMicron Technology Corp. JMB58x AHCI SATA controller [197b:0585] +-1c.1-[02]----00.0 JMicron Technology Corp. JMB58x AHCI SATA controller [197b:0585] +-1c.6-[03]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] +-1c.7-[04]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] +-1e.0 Intel Corporation Device [8086:4da8] +-1e.3 Intel Corporation Device [8086:4dab] +-1f.0 Intel Corporation Device [8086:4d87] +-1f.3 Intel Corporation Jasper Lake HD Audio [8086:4dc8] +-1f.4 Intel Corporation Jasper Lake SMBus [8086:4da3] \-1f.5 Intel Corporation Jasper Lake SPI Controller [8086:4da4] root@b443vpn:~# lsmod | grep i915 i915 1314764 0 drm_kms_helper 123302 1 i915 drm 313498 3 i915,drm_kms_helper iosf_mbi 4298 1 i915 fb 35077 2 i915,drm_kms_helper video 27424 1 i915 backlight 6170 2 i915,video button 5161 1 i915 i2c_algo_bit 5876 1 i915 [ 268.970218] audit: type=1105 audit(1705421941.685:200): pid=20965 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_env,pam_env,pam_permit,pam_umask,pam_unix,pam_limits acct="webuser" exe="/usr/sbin/cron" hostname=? addr=? terminal=cron res=success' [ 269.477092] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 270.083998] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 270.687320] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 271.290573] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 271.894298] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 272.499581] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 273.103407] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 273.132983] audit: type=1104 audit(1705421961.880:201): pid=20965 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_permit acct="webuser" exe="/usr/sbin/cron" hostname=? addr=? terminal=cron res=success' [ 273.138513] audit: type=1106 audit(1705421961.906:202): pid=20965 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_env,pam_env,pam_permit,pam_umask,pam_unix,pam_limits acct="webuser" exe="/usr/sbin/cron" hostname=? addr=? terminal=cron res=success' [ 273.706607] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 274.311265] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 274.915158] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 275.518378] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 276.121588] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 276.725612] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 277.330218] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 277.934320] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 278.538331] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 279.142898] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 279.749588] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 280.354620] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 280.958268] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. What else should I check? Thank you Quote Link to comment Share on other sites More sharing options...
blackmanga Posted January 17 Author Share #318 Posted January 17 19 hours ago, oz666 said: Hello community , I'm having some issues with HW transcoding and need some clarifications System: DSM918+ OS: Synology DSM 7.2.1-69057 update 3 Loader : ARC 24.1.6 Hardware: unknown vendor, bought from Aliexpress. CPU N5095 with integrated GPU, 12SATA ports (used 5), 2 NICs. BIOS from AMI, project W-N95-R build 20.09.2022 From what I see, N5095 is JasperLake generation 11. Is this currently supported by DSM 7.2 ? I can see the GPU in Plex Transcoder settings (JasperLake). I have a HVEC 10 bit file used for testing. If I select transcode from the plex menu (web) it keeps loading, system CPU spikes and gets a bit unresponsive..and nothing, no play. root@b443vpn:~# cat /sys/kernel/debug/dri/0/i915_frequency_info Video Turbo Mode: yes HW control enabled: yes SW control enabled: no PM IER=0x00000000 IMR=0x00000000 ISR=0x00000000 IIR=0x00000000, MASK=0x00003ffe pm_intrmsk_mbz: 0x80000000 GT_PERF_STATUS: 0x00c0610f Render p-state ratio: 97 Render p-state VID: 15 Render p-state limit: 255 RPSTAT1: 0x06000006 RPMODECTL: 0x00000d92 RPINCLIMIT: 0x00002c88 RPDECLIMIT: 0x00004fb0 RPNSWREQ: 200MHz CAGF: 200MHz RP CUR UP EI: 4692 (6256us) RP CUR UP: 0 (0us) RP PREV UP: 0 (0us) Up threshold: 95% RP CUR DOWN EI: 4698 (6264us) RP CUR DOWN: 0 (0us) RP PREV DOWN: 0 (0us) Down threshold: 85% Lowest (RPN) frequency: 200MHz Nominal (RP1) frequency: 450MHz Max non-overclocked (RP0) frequency: 750MHz Max overclocked frequency: 750MHz Current freq: 200 MHz Actual freq: 200 MHz Idle freq: 200 MHz Min freq: 200 MHz Boost freq: 750 MHz Max freq: 750 MHz efficient (RPe) frequency: 300 MHz Current CD clock frequency: 24000 kHz Max CD clock frequency: 675000 kHz Max pixel clock frequency: 675000 kHz root@b443vpn:~# lspci -tvnnq -+-[0001:03]---00.0 Intel Corporation I211 Gigabit Network Connection [8086:1539] +-[0001:02]---00.0 Intel Corporation I211 Gigabit Network Connection [8086:1539] +-[0001:01]---00.0 Marvell Technology Group Ltd. 88SE9215 PCIe 2.0 x1 4-port SATA 6 Gb/s Controller [1b4b:9215] +-[0001:00]-+-12.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SATA AHCI Controller [8086:5ae3] | +-13.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #1 [8086:5ad8] | +-14.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port B #1 [8086:5ad6] | +-15.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series USB xHCI [8086:5aa8] | +-16.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #1 [8086:5aac] | +-18.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #1 [8086:5abc] | +-19.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #3 [8086:5ac6] | +-19.2 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #3 [8086:5ac6] | +-1f.0 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller [8086:5ad4] | \-1f.1 Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller [8086:5ad4] \-[0000:00]-+-00.0 Intel Corporation Device [8086:4e24] +-02.0 Intel Corporation JasperLake [UHD Graphics] [8086:4e55] +-04.0 Intel Corporation Dynamic Tuning service [8086:4e03] +-08.0 Intel Corporation Device [8086:4e11] +-14.0 Intel Corporation Device [8086:4ded] +-14.2 Intel Corporation Device [8086:4def] +-15.0 Intel Corporation Serial IO I2C Host Controller [8086:4de8] +-15.2 Intel Corporation Device [8086:4dea] +-16.0 Intel Corporation Management Engine Interface [8086:4de0] +-17.0 Intel Corporation Device [8086:4dd3] +-19.0 Intel Corporation Device [8086:4dc5] +-19.1 Intel Corporation Device [8086:4dc6] +-1c.0-[01]----00.0 JMicron Technology Corp. JMB58x AHCI SATA controller [197b:0585] +-1c.1-[02]----00.0 JMicron Technology Corp. JMB58x AHCI SATA controller [197b:0585] +-1c.6-[03]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] +-1c.7-[04]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] +-1e.0 Intel Corporation Device [8086:4da8] +-1e.3 Intel Corporation Device [8086:4dab] +-1f.0 Intel Corporation Device [8086:4d87] +-1f.3 Intel Corporation Jasper Lake HD Audio [8086:4dc8] +-1f.4 Intel Corporation Jasper Lake SMBus [8086:4da3] \-1f.5 Intel Corporation Jasper Lake SPI Controller [8086:4da4] root@b443vpn:~# lsmod | grep i915 i915 1314764 0 drm_kms_helper 123302 1 i915 drm 313498 3 i915,drm_kms_helper iosf_mbi 4298 1 i915 fb 35077 2 i915,drm_kms_helper video 27424 1 i915 backlight 6170 2 i915,video button 5161 1 i915 i2c_algo_bit 5876 1 i915 [ 268.970218] audit: type=1105 audit(1705421941.685:200): pid=20965 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_env,pam_env,pam_permit,pam_umask,pam_unix,pam_limits acct="webuser" exe="/usr/sbin/cron" hostname=? addr=? terminal=cron res=success' [ 269.477092] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 270.083998] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 270.687320] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 271.290573] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 271.894298] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 272.499581] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 273.103407] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 273.132983] audit: type=1104 audit(1705421961.880:201): pid=20965 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_permit acct="webuser" exe="/usr/sbin/cron" hostname=? addr=? terminal=cron res=success' [ 273.138513] audit: type=1106 audit(1705421961.906:202): pid=20965 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_env,pam_env,pam_permit,pam_umask,pam_unix,pam_limits acct="webuser" exe="/usr/sbin/cron" hostname=? addr=? terminal=cron res=success' [ 273.706607] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 274.311265] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 274.915158] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 275.518378] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 276.121588] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 276.725612] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 277.330218] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 277.934320] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 278.538331] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 279.142898] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 279.749588] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 280.354620] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. [ 280.958268] [drm:fw_domains_get_with_fallback [i915]] *ERROR* media: timed out waiting for forcewake ack request. What else should I check? Thank you The modules i created should only work until 10th Gen Intel CPUs. Unfortunately, Jasper Lake (PCI ID 4E55), isnt covered. I see that you are using ARC loader. I m not sure where those module files are coming from or who created them. So ideally you will want to check with the maintainer of that loader. also i see that you might need to pass i915.enable_guc=2 when booting Quote Link to comment Share on other sites More sharing options...
mitya_zzz Posted January 23 Share #319 Posted January 23 В 13.01.2024 в 05:20, blackmanga сказал: Resharing the links. Added DSM 7.2 files as well DSM 918+ DSM 920+ in_modules.sh 203 \u0411 · 10 загрузок rm_modules.sh 183 \u0411 · 4 загрузки Hi, I'm running DS918+, DSM 7.2.1-69057 Update 3 on an Intel i7-10700 and Arc Loader 24.1.22-next. root@xpe-home:/volume1/homes/mitya/i915# ./rm_modules.sh rmmod: ERROR: Module fb is in use by: efifb fbcon softcursor bitblit and: root@xpe-home:/volume1/homes/mitya/i915# ./in_modules.sh insmod: ERROR: could not insert module fb.ko: Invalid module format insmod: ERROR: could not insert module i2c-algo-bit.ko: Invalid module format insmod: ERROR: could not insert module drm.ko: Invalid module format insmod: ERROR: could not insert module drm_kms_helper.ko: Invalid module format insmod: ERROR: could not insert module iosf_mbi.ko: Invalid module format insmod: ERROR: could not insert module backlight.ko: Invalid module format insmod: ERROR: could not insert module video.ko: Invalid module format insmod: ERROR: could not insert module i915.ko: Invalid module format What's wrong? Quote Link to comment Share on other sites More sharing options...
blackmanga Posted January 23 Author Share #320 Posted January 23 36 minutes ago, mitya_zzz said: Hi, I'm running DS918+, DSM 7.2.1-69057 Update 3 on an Intel i7-10700 and Arc Loader 24.1.22-next. root@xpe-home:/volume1/homes/mitya/i915# ./rm_modules.sh rmmod: ERROR: Module fb is in use by: efifb fbcon softcursor bitblit and: root@xpe-home:/volume1/homes/mitya/i915# ./in_modules.sh insmod: ERROR: could not insert module fb.ko: Invalid module format insmod: ERROR: could not insert module i2c-algo-bit.ko: Invalid module format insmod: ERROR: could not insert module drm.ko: Invalid module format insmod: ERROR: could not insert module drm_kms_helper.ko: Invalid module format insmod: ERROR: could not insert module iosf_mbi.ko: Invalid module format insmod: ERROR: could not insert module backlight.ko: Invalid module format insmod: ERROR: could not insert module video.ko: Invalid module format insmod: ERROR: could not insert module i915.ko: Invalid module format What's wrong? Can you show me the output for dmesg and cat /var/log/messages Quote Link to comment Share on other sites More sharing options...
mitya_zzz Posted January 23 Share #321 Posted January 23 1 час назад, blackmanga сказал: Can you show me the output for dmesg and cat /var/log/messages shure! varlog.txt dmesg.txt Quote Link to comment Share on other sites More sharing options...
blackmanga Posted January 24 Author Share #322 Posted January 24 (edited) 43 minutes ago, mitya_zzz said: shure! varlog.txt 1.65 MB · 1 download dmesg.txt 107.16 kB · 1 download Ok the error seems to be coz modules are stripped. I will shared the unstripped modules and you can try with that. https://www.mediafire.com/file/8l90uxmfgjwjclh/i915_918_7.2-unstriped.7z/file Edited January 24 by blackmanga Quote Link to comment Share on other sites More sharing options...
mitya_zzz Posted January 24 Share #323 Posted January 24 50 минут назад, blackmanga сказал: Ok the error seems to be coz modules are stripped. I will shared the unstripped modules and you can try with that. https://www.mediafire.com/file/8l90uxmfgjwjclh/i915_918_7.2-unstriped.7z/file Same... Quote Link to comment Share on other sites More sharing options...
blackmanga Posted January 24 Author Share #324 Posted January 24 8 minutes ago, mitya_zzz said: Same... Dmesg ? Quote Link to comment Share on other sites More sharing options...
mitya_zzz Posted January 24 Share #325 Posted January 24 4 часа назад, blackmanga сказал: Dmesg ? dmesg.txt Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.