Wraydroth Posted March 10, 2022 Share #351 Posted March 10, 2022 On 3/2/2022 at 9:41 AM, yanjun said: can you post the result of "fdisk -l" Hi, I was finally able to get my hands to COM port header extension and was able to login to console after the TC loader booted. Here is to output of "fdisk -l" . SynologyNAS> fdisk -l Disk /dev/synoboot: 29 GB, 30765219840 bytes, 60088320 sectors 29340 cylinders, 64 heads, 32 sectors/track Units: sectors of 1 * 512 = 512 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/synoboot1 * 0,32,33 6,62,56 2048 100351 98304 48.0M 83 Linux /dev/synoboot2 6,62,57 15,205,62 100352 253951 153600 75.0M 83 Linux /dev/synoboot3 15,205,63 130,138,8 253952 2097151 1843200 900M 83 Linux so seems it doesn't see any drives at all. Seems that the Broadcom 2116 wasn't recognized at all. Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 10, 2022 Share #352 Posted March 10, 2022 8 hours ago, RacerX said: Just a Test with the new module Chelsio T520-CR sudo ./rploader.sh ext bromolow-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/cxgb4/rpext-index.json The module seems to load correctly [OK] [#] ========================================== pocopico.cxgb4 ================== ======================== [#] Extension name: cxgb4 [#] Description: Adds Chelsio T4/T5/T6 Network Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/cxgb 4 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/cxgb4/r pext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 ds3617xs_42218 ds918p_25556 dva3221_42218 ds3622xsp_42218 ds3615xs_41222 ds3615xs_25556 ds918p_42218 ds3615x s_42218 [#] ============================================================================ =========== ssh into tinycore tc@box:~$ uname -r 5.10.3-tinycore64 It works fine in tinycore except the firmware is old tc@box:~$ dmesg |grep cxgb4 [ 1.204078] cxgb4 0000:01:00.4: Direct firmware load for cxgb4/t5fw.bin failed with error -2 [ 1.204080] cxgb4 0000:01:00.4: Falling back to sysfs fallback for: cxgb4/t5f w.bin [ 1.207705] cxgb4 0000:01:00.4: unable to load firmware image cxgb4/t5fw.bin, error -11 [ 1.207942] cxgb4 0000:01:00.4: Coming up as MASTER: Initializing adapter [ 1.897496] cxgb4 0000:01:00.4: Direct firmware load for cxgb4/t5-config.txt failed with error -2 [ 1.897502] cxgb4 0000:01:00.4: Falling back to sysfs fallback for: cxgb4/t5-config.txt [ 2.424116] cxgb4 0000:01:00.4: Successfully configured using Firmware Configuration File "Firmware Default", version 0x0, computed checksum 0x0 [ 2.594109] cxgb4 0000:01:00.4: Hash filter supported only on T6 [ 2.644117] cxgb4 0000:01:00.4: max_ordird_qp 21 max_ird_adapter 387072 [ 2.684118] cxgb4 0000:01:00.4: Current filter mode/mask 0x632b:0x21 [ 2.750065] cxgb4 0000:01:00.4: 62 MSI-X vectors allocated, nic 12 eoqsets 12 per uld 6 mirrorqsets 12 [ 2.750081] cxgb4 0000:01:00.4: 63.008 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x8 link) [ 2.779388] cxgb4 0000:01:00.4 eth0: eth0: Chelsio T520-CR (0000:01:00.4) 1G/10GBASE-SFP [ 2.780246] cxgb4 0000:01:00.4 eth1: eth1: Chelsio T520-CR (0000:01:00.4) 1G/10GBASE-SFP [ 2.817487] cxgb4 0000:01:00.4: Chelsio T520-CR rev 0 [ 2.817493] cxgb4 0000:01:00.4: S/N: PT03151028, P/N: 110118250B0 [ 2.817498] cxgb4 0000:01:00.4: Firmware version: 1.24.17.0 [ 2.817502] cxgb4 0000:01:00.4: Bootstrap version: 1.1.0.0 [ 2.817506] cxgb4 0000:01:00.4: TP Microcode version: 0.1.4.9 [ 2.817510] cxgb4 0000:01:00.4: Expansion ROM version: 1.0.0.68 [ 2.817514] cxgb4 0000:01:00.4: Serial Configuration version: 0x1005000 [ 2.817517] cxgb4 0000:01:00.4: VPD version: 0x2 [ 2.817521] cxgb4 0000:01:00.4: Configuration: RNIC MSI-X, Offload capable [ 27.104114] cxgb4 0000:01:00.4 eth0: passive DA module inserted [ 27.680816] cxgb4 0000:01:00.4 eth1: port module unplugged [ 27.706482] cxgb4 0000:01:00.4 eth0: link up, 10Gbps, full-duplex, Tx/Rx PAUS E tc@box:~$ When I boot usb I get a red light on the back of the card (not initialized) Is this a firmware thing? https://service.chelsio.com/store2/T5/Unified Wire/Linux/ChelsioUwire-3.16.0.0/README.txt The firmware (v1.26.6.0) is installed on the system, typically in /lib/firmware/cxgb4, and the driver will auto-load the firmware if an update is required. The kernel must be configured to enable userspace firmware loading support. Device Drivers -> Generic Driver Options -> Userspace firmware loading support Any advise? Yes, do you see the module loaded on DSM ? If so what are the dmesg messages about cxgb4 ? Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 10, 2022 Share #353 Posted March 10, 2022 8 hours ago, RacerX said: Just a Test with the new module Chelsio T520-CR sudo ./rploader.sh ext bromolow-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/cxgb4/rpext-index.json The module seems to load correctly [OK] [#] ========================================== pocopico.cxgb4 ================== ======================== [#] Extension name: cxgb4 [#] Description: Adds Chelsio T4/T5/T6 Network Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/cxgb 4 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/cxgb4/r pext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 ds3617xs_42218 ds918p_25556 dva3221_42218 ds3622xsp_42218 ds3615xs_41222 ds3615xs_25556 ds918p_42218 ds3615x s_42218 [#] ============================================================================ =========== ssh into tinycore tc@box:~$ uname -r 5.10.3-tinycore64 It works fine in tinycore except the firmware is old tc@box:~$ dmesg |grep cxgb4 [ 1.204078] cxgb4 0000:01:00.4: Direct firmware load for cxgb4/t5fw.bin failed with error -2 [ 1.204080] cxgb4 0000:01:00.4: Falling back to sysfs fallback for: cxgb4/t5f w.bin [ 1.207705] cxgb4 0000:01:00.4: unable to load firmware image cxgb4/t5fw.bin, error -11 [ 1.207942] cxgb4 0000:01:00.4: Coming up as MASTER: Initializing adapter [ 1.897496] cxgb4 0000:01:00.4: Direct firmware load for cxgb4/t5-config.txt failed with error -2 [ 1.897502] cxgb4 0000:01:00.4: Falling back to sysfs fallback for: cxgb4/t5-config.txt [ 2.424116] cxgb4 0000:01:00.4: Successfully configured using Firmware Configuration File "Firmware Default", version 0x0, computed checksum 0x0 [ 2.594109] cxgb4 0000:01:00.4: Hash filter supported only on T6 [ 2.644117] cxgb4 0000:01:00.4: max_ordird_qp 21 max_ird_adapter 387072 [ 2.684118] cxgb4 0000:01:00.4: Current filter mode/mask 0x632b:0x21 [ 2.750065] cxgb4 0000:01:00.4: 62 MSI-X vectors allocated, nic 12 eoqsets 12 per uld 6 mirrorqsets 12 [ 2.750081] cxgb4 0000:01:00.4: 63.008 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x8 link) [ 2.779388] cxgb4 0000:01:00.4 eth0: eth0: Chelsio T520-CR (0000:01:00.4) 1G/10GBASE-SFP [ 2.780246] cxgb4 0000:01:00.4 eth1: eth1: Chelsio T520-CR (0000:01:00.4) 1G/10GBASE-SFP [ 2.817487] cxgb4 0000:01:00.4: Chelsio T520-CR rev 0 [ 2.817493] cxgb4 0000:01:00.4: S/N: PT03151028, P/N: 110118250B0 [ 2.817498] cxgb4 0000:01:00.4: Firmware version: 1.24.17.0 [ 2.817502] cxgb4 0000:01:00.4: Bootstrap version: 1.1.0.0 [ 2.817506] cxgb4 0000:01:00.4: TP Microcode version: 0.1.4.9 [ 2.817510] cxgb4 0000:01:00.4: Expansion ROM version: 1.0.0.68 [ 2.817514] cxgb4 0000:01:00.4: Serial Configuration version: 0x1005000 [ 2.817517] cxgb4 0000:01:00.4: VPD version: 0x2 [ 2.817521] cxgb4 0000:01:00.4: Configuration: RNIC MSI-X, Offload capable [ 27.104114] cxgb4 0000:01:00.4 eth0: passive DA module inserted [ 27.680816] cxgb4 0000:01:00.4 eth1: port module unplugged [ 27.706482] cxgb4 0000:01:00.4 eth0: link up, 10Gbps, full-duplex, Tx/Rx PAUS E tc@box:~$ When I boot usb I get a red light on the back of the card (not initialized) Is this a firmware thing? https://service.chelsio.com/store2/T5/Unified Wire/Linux/ChelsioUwire-3.16.0.0/README.txt The firmware (v1.26.6.0) is installed on the system, typically in /lib/firmware/cxgb4, and the driver will auto-load the firmware if an update is required. The kernel must be configured to enable userspace firmware loading support. Device Drivers -> Generic Driver Options -> Userspace firmware loading support Any advise? Yes, do you see the module loaded on DSM ? If so what are the dmesg messages about cxgb4 ? Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 10, 2022 Share #354 Posted March 10, 2022 8 hours ago, RacerX said: Just a Test with the new module Chelsio T520-CR sudo ./rploader.sh ext bromolow-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/cxgb4/rpext-index.json The module seems to load correctly [OK] [#] ========================================== pocopico.cxgb4 ================== ======================== [#] Extension name: cxgb4 [#] Description: Adds Chelsio T4/T5/T6 Network Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/cxgb 4 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/cxgb4/r pext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 ds3617xs_42218 ds918p_25556 dva3221_42218 ds3622xsp_42218 ds3615xs_41222 ds3615xs_25556 ds918p_42218 ds3615x s_42218 [#] ============================================================================ =========== ssh into tinycore tc@box:~$ uname -r 5.10.3-tinycore64 It works fine in tinycore except the firmware is old tc@box:~$ dmesg |grep cxgb4 [ 1.204078] cxgb4 0000:01:00.4: Direct firmware load for cxgb4/t5fw.bin failed with error -2 [ 1.204080] cxgb4 0000:01:00.4: Falling back to sysfs fallback for: cxgb4/t5f w.bin [ 1.207705] cxgb4 0000:01:00.4: unable to load firmware image cxgb4/t5fw.bin, error -11 [ 1.207942] cxgb4 0000:01:00.4: Coming up as MASTER: Initializing adapter [ 1.897496] cxgb4 0000:01:00.4: Direct firmware load for cxgb4/t5-config.txt failed with error -2 [ 1.897502] cxgb4 0000:01:00.4: Falling back to sysfs fallback for: cxgb4/t5-config.txt [ 2.424116] cxgb4 0000:01:00.4: Successfully configured using Firmware Configuration File "Firmware Default", version 0x0, computed checksum 0x0 [ 2.594109] cxgb4 0000:01:00.4: Hash filter supported only on T6 [ 2.644117] cxgb4 0000:01:00.4: max_ordird_qp 21 max_ird_adapter 387072 [ 2.684118] cxgb4 0000:01:00.4: Current filter mode/mask 0x632b:0x21 [ 2.750065] cxgb4 0000:01:00.4: 62 MSI-X vectors allocated, nic 12 eoqsets 12 per uld 6 mirrorqsets 12 [ 2.750081] cxgb4 0000:01:00.4: 63.008 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x8 link) [ 2.779388] cxgb4 0000:01:00.4 eth0: eth0: Chelsio T520-CR (0000:01:00.4) 1G/10GBASE-SFP [ 2.780246] cxgb4 0000:01:00.4 eth1: eth1: Chelsio T520-CR (0000:01:00.4) 1G/10GBASE-SFP [ 2.817487] cxgb4 0000:01:00.4: Chelsio T520-CR rev 0 [ 2.817493] cxgb4 0000:01:00.4: S/N: PT03151028, P/N: 110118250B0 [ 2.817498] cxgb4 0000:01:00.4: Firmware version: 1.24.17.0 [ 2.817502] cxgb4 0000:01:00.4: Bootstrap version: 1.1.0.0 [ 2.817506] cxgb4 0000:01:00.4: TP Microcode version: 0.1.4.9 [ 2.817510] cxgb4 0000:01:00.4: Expansion ROM version: 1.0.0.68 [ 2.817514] cxgb4 0000:01:00.4: Serial Configuration version: 0x1005000 [ 2.817517] cxgb4 0000:01:00.4: VPD version: 0x2 [ 2.817521] cxgb4 0000:01:00.4: Configuration: RNIC MSI-X, Offload capable [ 27.104114] cxgb4 0000:01:00.4 eth0: passive DA module inserted [ 27.680816] cxgb4 0000:01:00.4 eth1: port module unplugged [ 27.706482] cxgb4 0000:01:00.4 eth0: link up, 10Gbps, full-duplex, Tx/Rx PAUS E tc@box:~$ When I boot usb I get a red light on the back of the card (not initialized) Is this a firmware thing? https://service.chelsio.com/store2/T5/Unified Wire/Linux/ChelsioUwire-3.16.0.0/README.txt The firmware (v1.26.6.0) is installed on the system, typically in /lib/firmware/cxgb4, and the driver will auto-load the firmware if an update is required. The kernel must be configured to enable userspace firmware loading support. Device Drivers -> Generic Driver Options -> Userspace firmware loading support Any advise? Yes, do you see the module loaded on DSM ? If so what are the dmesg messages about cxgb4 ? Quote Link to comment Share on other sites More sharing options...
RacerX Posted March 10, 2022 Share #355 Posted March 10, 2022 (edited) On DMS usb boot Loading Linux... Loading initramfs... Starting kernel with USB boot That's it, I do not see the driver loading One qustion regarding navigate to /home/tc/redpill-load/cache/ and download (in my case) S3622xs+_42218.pat when I go to that folder that file is already present. Is this necessary? Also I tried the card in a different pci slot no change If I test with virtual box, vm, since the nic is virtual could that tell us more? Edited March 10, 2022 by RacerX Quote Link to comment Share on other sites More sharing options...
RacerX Posted March 10, 2022 Share #356 Posted March 10, 2022 tc@box:~$ dmesg | grep -iC 3 "cxgb4" [ 1.191364] usb: port power management may be unreliable [ 1.192118] mei_me 0000:00:16.0: enabling device (0004 -> 0006) [ 1.204492] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 1.227661] cxgb4 0000:02:00.4: Direct firmware load for cxgb4/t5fw.bin failed with error -2 [ 1.227666] cxgb4 0000:02:00.4: Falling back to sysfs fallback for: cxgb4/t5fw.bin [ 1.229749] cxgb4 0000:02:00.4: unable to load firmware image cxgb4/t5fw.bin, error -11 [ 1.230116] cxgb4 0000:02:00.4: Coming up as MASTER: Initializing adapter [ 1.280852] tsc: Refined TSC clocksource calibration: 3599.999 MHz [ 1.280861] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4525366a, max_idle_ns: 440795257657 ns [ 1.280880] clocksource: Switched to clocksource tsc -- [ 1.791161] input: HP HP Wireless Keyboard Kit as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:03F0:140C.0002/input/input9 [ 1.791280] hid-generic 0003:03F0:140C.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [HP HP Wireless Keyboard Kit] on usb-0000:00:14.0-7/input1 [ 1.917566] usb 1-8: new full-speed USB device number 3 using xhci_hcd [ 1.934293] cxgb4 0000:02:00.4: Direct firmware load for cxgb4/t5-config.txt failed with error -2 [ 1.934300] cxgb4 0000:02:00.4: Falling back to sysfs fallback for: cxgb4/t5-config.txt [ 2.064772] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C52B.0003/input/input10 [ 2.121210] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-8/input0 [ 2.123927] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C52B.0004/input/input11 -- [ 2.300914] usb 1-10: new high-speed USB device number 4 using xhci_hcd [ 2.444652] usb-storage 1-10:1.0: USB Mass Storage device detected [ 2.445235] scsi host6: usb-storage 1-10:1.0 [ 2.460930] cxgb4 0000:02:00.4: Successfully configured using Firmware Configuration File "Firmware Default", version 0x0, computed checksum 0x0 [ 2.634245] cxgb4 0000:02:00.4: Hash filter supported only on T6 [ 2.684240] cxgb4 0000:02:00.4: max_ordird_qp 21 max_ird_adapter 387072 [ 2.724247] cxgb4 0000:02:00.4: Current filter mode/mask 0x632b:0x21 [ 2.790295] cxgb4 0000:02:00.4: 62 MSI-X vectors allocated, nic 12 eoqsets 12 per uld 6 mirrorqsets 12 [ 2.790315] cxgb4 0000:02:00.4: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:1b.4 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link) [ 2.819587] cxgb4 0000:02:00.4 eth0: eth0: Chelsio T520-CR (0000:02:00.4) 1G/10GBASE-SFP [ 2.820488] cxgb4 0000:02:00.4 eth1: eth1: Chelsio T520-CR (0000:02:00.4) 1G/10GBASE-SFP [ 2.867629] cxgb4 0000:02:00.4: Chelsio T520-CR rev 0 [ 2.867635] cxgb4 0000:02:00.4: S/N: PT03151028, P/N: 110118250B0 [ 2.867640] cxgb4 0000:02:00.4: Firmware version: 1.24.17.0 [ 2.867644] cxgb4 0000:02:00.4: Bootstrap version: 1.1.0.0 [ 2.867648] cxgb4 0000:02:00.4: TP Microcode version: 0.1.4.9 [ 2.867652] cxgb4 0000:02:00.4: Expansion ROM version: 1.0.0.68 [ 2.867656] cxgb4 0000:02:00.4: Serial Configuration version: 0x1005000 [ 2.867659] cxgb4 0000:02:00.4: VPD version: 0x2 [ 2.867664] cxgb4 0000:02:00.4: Configuration: RNIC MSI-X, Offload capable [ 4.491443] scsi 6:0:0:0: Direct-Access PNY USB 2.0 FD 1100 PQ: 0 ANSI: 4 [ 4.491929] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 4.492842] sd 6:0:0:0: [sdc] 63180800 512-byte logical blocks: (32.3 GB/30.1 GiB) -- [ 12.192418] FAT-fs (sdc3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 12.201623] FAT-fs (sdc3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 13.484519] random: crng init done [ 25.550912] cxgb4 0000:02:00.4 eth0: passive DA module inserted [ 26.127601] cxgb4 0000:02:00.4 eth1: port module unplugged [ 26.143164] cxgb4 0000:02:00.4 eth0: link up, 10Gbps, full-duplex, Tx/Rx PAUSE [ 105.842097] usb 1-7: USB disconnect, device number 2 [ 106.187588] usb 1-8: USB disconnect, device number 3 [ 112.964211] usb 1-7: new low-speed USB device number 5 using xhci_hcd tc@box:~$ Quote Link to comment Share on other sites More sharing options...
RacerX Posted March 10, 2022 Share #357 Posted March 10, 2022 tc@box:~$ [ 2.790315] cxgb4 0000:02:00.4: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:1b.4 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link) -sh: syntax error: unexpected "(" tc@box:~$ [ 2.819587] cxgb4 0000:02:00.4 eth0: eth0: Chelsio T520-CR (0000:02:00.4) 1G/10GBASE-SFP -sh: syntax error: unexpected "(" tc@box:~$ [ 2.820488] cxgb4 0000:02:00.4 eth1: eth1: Chelsio T520-CR (0000:02:00.4) 1G/10GBASE-SFP -sh: syntax error: unexpected "(" tc@box:~$ [ 2.867629] cxgb4 0000:02:00.4: Chelsio T520-CR rev 0 sh: missing ] Quote Link to comment Share on other sites More sharing options...
Wraydroth Posted March 11, 2022 Share #358 Posted March 11, 2022 Hi, I did some troubleshooting and found out that mpt3sas is not loading at all during the boot. Which is kinda strange. But when I do after full boot as root " insmod /lib/modules/mpt3sas.ko" it will initialize both controllers and find all drivers. I tried to build loader again with just default behavior (only changed max drives + pattern) and its still the same - it just wont load mpt3sas at all. I was checking the whole console boot output and there is no indication why - no error or something. Quote Link to comment Share on other sites More sharing options...
pocopico Posted March 11, 2022 Share #359 Posted March 11, 2022 9 minutes ago, Wraydroth said: Hi, I did some troubleshooting and found out that mpt3sas is not loading at all during the boot. Which is kinda strange. But when I do after full boot as root " insmod /lib/modules/mpt3sas.ko" it will initialize both controllers and find all drivers. I tried to build loader again with just default behavior (only changed max drives + pattern) and its still the same - it just wont load mpt3sas at all. I was checking the whole console boot output and there is no indication why - no error or something. Are you talking about the included mpt3sas module ? it will not load unless you tell system to enable them or you can use the mpt3sas extension. Quote Link to comment Share on other sites More sharing options...
Orphée Posted March 12, 2022 Share #360 Posted March 12, 2022 DVA3221 Baremetal status update :Fixed !! Baremetal booted !!https://github.com/dogodefi/redpill-lkm/blob/develop/config/platforms.h#L129Need to change ".fix_disk_led_ctrl = false," to ".fix_disk_led_ctrl = true,"like on DS918+ !And for Virtual Machine (ESXi/Proxmox VE) :need to update SATA boot to "synoboot_satadom=2"https://github.com/dogodefi/redpill-load/blob/develop/config/DVA3221/7.0.1-42218/config.json#L106 3 Quote Link to comment Share on other sites More sharing options...
jahsoul Posted March 12, 2022 Share #361 Posted March 12, 2022 8 hours ago, Orphée said: DVA3221 Baremetal status update : Fixed !! Baremetal booted !! https://github.com/dogodefi/redpill-lkm/blob/develop/config/platforms.h#L129 Need to change ".fix_disk_led_ctrl = false," to ".fix_disk_led_ctrl = true," like on DS918+ ! And for Virtual Machine (ESXi/Proxmox VE) : need to update SATA boot to "synoboot_satadom=2" https://github.com/dogodefi/redpill-load/blob/develop/config/DVA3221/7.0.1-42218/config.json#L106 So I'm in the boat of wanting to run a DVA3221 next to my 1621+. If we have a spare nvidia GPU lying around, we are able to run the complete system baremetal? Quote Link to comment Share on other sites More sharing options...
Orphée Posted March 12, 2022 Share #362 Posted March 12, 2022 So I'm in the boat of wanting to run a DVA3221 next to my 1621+. If we have a spare nvidia GPU lying around, we are able to run the complete system baremetal? I bought a hp oem system with core i5, 8gb ram and nvidia gtx1650. I wanted the GPU to match original spec in order to avoid incompatibility risks. And yes now it works. 2 things : - i don't know if it will work with other nvidia gpu than a 1650. - i can't garrantee advanced AI feature will work without real SN/mac I can(edit fixed) confirm i was able to run a VM without GPU with SS functionnal for normal use without AI features, so it should apply to baremetal as well. By the way you will have to wait for@yanjun to update repository and@pocopico to update custom_config to add DVA3221. At least to use tinycore@pocopico must upload fixed redpill.ko with fix led value to true. I'm not at home currently so can't post custom_config value... 1 Quote Link to comment Share on other sites More sharing options...
jahsoul Posted March 12, 2022 Share #363 Posted March 12, 2022 31 minutes ago, Orphée said: I bought a hp oem system with core i5, 8gb ram and nvidia gtx1650. I wanted the GPU to match original spec in order to avoid incompatibility risks. And yes now it works. 2 things : - i don't know if it will work with other nvidia gpu than a 1650. - i can't garrantee advanced AI feature will work without real SN/mac I can(edit fixed) confirm i was able to run a VM without GPU with SS functionnal for normal use without AI features, so it should apply to baremetal as well. By the way you will have to wait for@yanjun to update repository and@pocopico to update custom_config to add DVA3221. At least to use tinycore@pocopico must upload fixed redpill.ko with fix led value to true. I'm not at home currently so can't post custom_config value... This is so awesome. Would the advanced AI features need the SN/Mac of a DVA3221 or any box? Since I don't connect my stuff to the internet anyway, I wouldn't mind using what I currently have. The GPU is where I'm stuck. I was looking at getting a T1000 because its specs are nearly identical to the 1650 with a lower power requirement and profile. I think I'm going to go for the gusto..lol. Thanks for replying and you working on this. Quote Link to comment Share on other sites More sharing options...
Orphée Posted March 12, 2022 Share #364 Posted March 12, 2022 Would the advanced AI features need the SN/Mac of a DVA3221 or any box? Can't be sure, but I bet for DVA3221...At least a try with generated ones would confirm if real one is actually needed or not. 1 Quote Link to comment Share on other sites More sharing options...
Orphée Posted March 13, 2022 Share #365 Posted March 13, 2022 Baremetal : Here is tinycore custom_config file part for DVA3221 : { "id": "denverton-7.0.1-42218", "platform_version": "denverton-7.0.1-42218", "user_config_json": "denverton_user_config.json", "docker_base_image": "debian:8-slim", "redpill_lkm_make_target": "dev-v7", "compile_with": "toolkit_dev", "downloads": { "kernel": { "url": "https://global.download.synology.com/download/ToolChain/Synology%20NAS%20GPL%20Source/7.0-41890/denverton/linux-4.4.x.txz", "sha256": "7fe8e92ebf0a2fd30da10867d5165ae00b10b0a316286465ae9831ed3b598f0f" }, "toolkit_dev": { "url": "https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.denverton-7.0.dev.txz/download", "sha256": "6dc6818bad28daff4b3b8d27b5e12d0565b65ee60ac17e55c36d913462079f57" } }, "redpill_lkm": { "source_url": "https://github.com/dogodefi/redpill-lkm.git", "branch": "develop" }, "redpill_load": { "source_url": "https://github.com/dogodefi/redpill-load.git", "branch": "develop" } }, You will have to wait for Pocopico to update https://github.com/pocopico/rp-ext/blob/main/redpill/releases/redpill-4.4.180plus-denverton.tgz Then for baremetal it should work. 1 Quote Link to comment Share on other sites More sharing options...
jahsoul Posted March 13, 2022 Share #366 Posted March 13, 2022 @OrphéeIs the GPU hardcoded the same way that the CPU is? Also, I plan on testing with a similar GPU that I have laying around just because theoretically, if it works with you GTX1650, it should work with anything supported by the Linux display driver but it is no harm, no foul since I'm not spending any money. If it doesn't work, I know where to put my money Quote Link to comment Share on other sites More sharing options...
Orphée Posted March 13, 2022 Share #367 Posted March 13, 2022 I don't know. Quote Link to comment Share on other sites More sharing options...
aportnov Posted March 13, 2022 Share #368 Posted March 13, 2022 (edited) Updated from 918 to 3622. Everything is working, the mac has been repaired and is detected correctly, it also enters quick connect. I don't understand, like on a test build, I immediately updated to update 3, but not here. Is it possible to install update 3 immediately on a working system without testing? Edited March 13, 2022 by aportnov Quote Link to comment Share on other sites More sharing options...
synoxpe Posted March 13, 2022 Share #369 Posted March 13, 2022 12 hours ago, Orphée said: Then for baremetal it should work. The screenshot *is* from a baremetal installation right? What do you mean then? Quote Link to comment Share on other sites More sharing options...
synoxpe Posted March 13, 2022 Share #370 Posted March 13, 2022 Any idea why my Intel i7 with base frequency of 1.61GHz (1.61~4.7) is being reported as Xeon D-1531 @1GHz? Is this hardcoded? Quote Link to comment Share on other sites More sharing options...
synoxpe Posted March 13, 2022 Share #371 Posted March 13, 2022 3 hours ago, aportnov said: Is it possible to install update 3 immediately on a working system without testing? I got an infinite recovery loop. So I'd avoid for now till it's fixed. Quote Link to comment Share on other sites More sharing options...
Orphée Posted March 13, 2022 Share #372 Posted March 13, 2022 The screenshot *is* from a baremetal installation right? What do you mean then?Yes it is.I mean each baremetal system is different, so it works for me, you may need to adapt/fix things, as always. Quote Link to comment Share on other sites More sharing options...
Orphée Posted March 13, 2022 Share #373 Posted March 13, 2022 (edited) 44 minutes ago, synoxpe said: Any idea why my Intel i7 with base frequency of 1.61GHz (1.61~4.7) is being reported as Xeon D-1531 @1GHz? Is this hardcoded? On EVERY loaders it ALWAYS shows the official Synology's CPU's infos. Unless you use a script provided on the forum to "fix" it... But it is totally cosmetic. Edited March 13, 2022 by Orphée 1 Quote Link to comment Share on other sites More sharing options...
synoxpe Posted March 13, 2022 Share #374 Posted March 13, 2022 2 hours ago, Orphée said: Yes it is. I mean each baremetal system is different, so it works for me, you may need to adapt/fix things, as always. gotcha Quote Link to comment Share on other sites More sharing options...
Orphée Posted March 13, 2022 Share #375 Posted March 13, 2022 @jahsoul for info, Pocopico and Yanjun updated their repository (thanks to them). You should now be able to build DVA3221 with my above custom_config definition. Keep us updated of your results 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.