Olegin Posted April 16, 2020 Share #1 Posted April 16, 2020 Quote Link to comment Share on other sites More sharing options...
use-nas Posted April 16, 2020 Share #2 Posted April 16, 2020 DSM 6.2.3-25423 Осторожно!! В SurveillanceStation отвалились usb вебкамеры 😡 Kernel panic - not syncing: Fatal exception in interrupt Quote Link to comment Share on other sites More sharing options...
alexku44 Posted April 16, 2020 Share #3 Posted April 16, 2020 5 часов назад, alexku44 сказал: DS918+/Jun’s Mod V1.04b/DSM 6.2.3-25423 - результат обновления: УСПЕШНЫЙ - версия DSM до обновления (миграции): DSM 6.2.2-24922 Update 6 - версия и модель загрузчика до обновления (миграции) : Jun's Loader v1.04b - DS918+ - железо: ASUS J1900I-C, GA-j1800n-d2h - видео адаптер отключен в BIOS!!! - дополнительные комментарии: требуется перезагрузка, слетел vid/pid в grub / пропал HW нет папки dev/dri ОТКАТ на 6.2.2-24922 Update 6 Quote Link to comment Share on other sites More sharing options...
lotusd Posted April 16, 2020 Share #4 Posted April 16, 2020 (edited) 1 час назад, alexku44 сказал: пропал HW нет папки dev/dri То же самое. vid/pid причем? система же загрузилась? Камера в SS работает, QC работает, CPU info слетел, новая установка не помогла восстановить Edited April 16, 2020 by lotusd Quote Link to comment Share on other sites More sharing options...
alexku44 Posted April 16, 2020 Share #5 Posted April 16, 2020 29 минут назад, lotusd сказал: То же самое. vid/pid причем? система же загрузилась? Камера в SS работает, QC работает, CPU info слетел, новая установка не помогла восстановить При обновлении в file station появилась флэшке. Сразу проверил vid/pid он сменился. Не знаю как, но это факт... До этого прошел все обновления начиная с 6.1 такого не было. Quote Link to comment Share on other sites More sharing options...
lotusd Posted April 16, 2020 Share #6 Posted April 16, 2020 1 минуту назад, alexku44 сказал: При обновлении в file station появилась флэшке. Сразу проверил vid/pid он сменился. Не знаю как, но это факт... До этого прошел все обновления начиная с 6.1 такого не было. Нет, у меня флешка не появилась. Кодеки завелись, а вот папки dev/dri нет. Если не считать cpu info то вроде как ничего больше не поменялось. серийник и мак тоже не слетели (валидные) QC - работает. @Olegin Помогай!!! Транскодинг шибко больно нужен Quote Link to comment Share on other sites More sharing options...
use-nas Posted April 16, 2020 Share #7 Posted April 16, 2020 В логах что?? У меня так вообще паника ядра при подключенных USB камерах ... HW работает. Quote Link to comment Share on other sites More sharing options...
lotusd Posted April 16, 2020 Share #8 Posted April 16, 2020 (edited) 9 минут назад, use-nas сказал: В логах что?? У меня так вообще паника ядра при подключенных USB камерах ... HW работает. Ничего особенного. Много пакетов обновилось после обновы DSM. И, да, все USB диски перемонтировались после обновления DSM Edited April 16, 2020 by lotusd Quote Link to comment Share on other sites More sharing options...
use-nas Posted April 17, 2020 Share #9 Posted April 17, 2020 Сино в последнем обновлении обновило кучу модулей и видео и сеть, как пишут в буржуйских ветках грузиться и джуновкие и сино драйверы... отсюда проблемы. Quote Link to comment Share on other sites More sharing options...
Olegin Posted April 17, 2020 Author Share #10 Posted April 17, 2020 2 часа назад, use-nas сказал: Сино в последнем обновлении обновило кучу модулей и видео и сеть, как пишут в буржуйских ветках грузиться и джуновкие и сино драйверы... отсюда проблемы. Ребята, в чем проблема? У меня работает на голом железе. Если есть траблы, то давайте выведем в отдельную тему(ы). Quote Link to comment Share on other sites More sharing options...
Olegin Posted April 17, 2020 Author Share #11 Posted April 17, 2020 Скрытый текст Quote Link to comment Share on other sites More sharing options...
use-nas Posted April 17, 2020 Share #12 Posted April 17, 2020 (edited) Тык эта тема то для чего? ))) Меняй Extra без i915. И про фирмфаре не забудь. Edited April 17, 2020 by use-nas Quote Link to comment Share on other sites More sharing options...
Olegin Posted April 17, 2020 Author Share #13 Posted April 17, 2020 14 минуты назад, use-nas сказал: Тык эта тема то для чего? ))) Меняй Extra без i915. И про фирмфаре не забудь. Неохото флешку менять... до сих пор все работало. Quote Link to comment Share on other sites More sharing options...
use-nas Posted April 17, 2020 Share #14 Posted April 17, 2020 (edited) ?? зачем менять?? ))) Сам же иструкшен писал как сменить на работающей хрени.. старую переименуй для отката и не забудь update убить. Edited April 17, 2020 by use-nas Quote Link to comment Share on other sites More sharing options...
lotusd Posted April 17, 2020 Share #15 Posted April 17, 2020 Ну так что, парни, какое решение видите для восстановления HW ? Quote Link to comment Share on other sites More sharing options...
use-nas Posted April 17, 2020 Share #16 Posted April 17, 2020 Quote Link to comment Share on other sites More sharing options...
lotusd Posted April 17, 2020 Share #17 Posted April 17, 2020 Это что должно восстановить HW? Quote Link to comment Share on other sites More sharing options...
use-nas Posted April 17, 2020 Share #18 Posted April 17, 2020 Вирмварь подсунь для своего проца Quote Link to comment Share on other sites More sharing options...
lotusd Posted April 17, 2020 Share #19 Posted April 17, 2020 11 минуту назад, use-nas сказал: Вирмварь подсунь для своего проца А есть какая-нибудь инструкция как это делать? или проще откатиться на 622? Quote Link to comment Share on other sites More sharing options...
use-nas Posted April 17, 2020 Share #20 Posted April 17, 2020 Ну почему мы не хотим почитать ((((((( Quote Link to comment Share on other sites More sharing options...
lotusd Posted April 17, 2020 Share #21 Posted April 17, 2020 Читаю, правильно я понял, что моя версия экстра должна быть: 2. "std" - with jun's i915 driver from 1.04b (tested for coffee lake cpu from q2/2018), needed for anything newer then kaby lake like gemini lake, coffee lake, cannon lake, ice lake, i915 driver source date: 20180514 - as i had no source i915 driver is the same binary as in jun's original extra/extra2, on my system its working with a G5400, not just /dev/dri present, tested completely with really transcoding a video, so its working in general but might fail in some(?) cases, also 8th/9th gen cpu like i3/i5 8100/9400 produce a /dev/dri, tested with a 9400 and it does work2. "std" - with jun's i915 driver from 1.04b (tested for coffee lake cpu from q2/2018), needed for anything newer then kaby lake like gemini lake, coffee lake, cannon lake, ice lake, i915 driver source date: 20180514 - as i had no source i915 driver is the same binary as in jun's original extra/extra2, on my system its working with a G5400, not just /dev/dri present, tested completely with really transcoding a video, so its working in general but might fail in some(?) cases, also 8th/9th gen cpu like i3/i5 8100/9400 produce a /dev/dri, tested with a 9400 and it does work 0.8_std ds918+ - extra.lzma/extra2.lzma for loader 1.04b_mod ds918+ DSM 6.2.2 v0.8_stdhttp://s000.tinyupload.com/?file_id=00354004133254441591 SHA256: F611BCA5457A74AE65ABC4596F1D0E6B36A2749B16A827087D97C1CAF3FEA89A С другой стороны он пишет в самом начале, что это не работает для 6.2.3. Quote Link to comment Share on other sites More sharing options...
alexku44 Posted April 17, 2020 Share #22 Posted April 17, 2020 (edited) попробовал установить на голое железо. loader 1.04b 918+ не меняя extra.lzma. установилась, на удивление сеть работает на realtek 8111. но папка dev/dri так и не появилась. заменил два файла extra.lzma v 0.8 syno т.к у меня j1800. после перезагрузки сеть не заводится в сети не видится. на мониторе "квадрат малевича" через ~минуту. такое наблюдал при рабочем HW на 6.2.2 если не отключить видео в биосе. Вопрос: как теперь завести сеть? Edited April 17, 2020 by alexku44 Quote Link to comment Share on other sites More sharing options...
lotusd Posted April 17, 2020 Share #23 Posted April 17, 2020 А вы пробовали версию syno? Quote Link to comment Share on other sites More sharing options...
use-nas Posted April 17, 2020 Share #24 Posted April 17, 2020 19 минут назад, alexku44 сказал: после перезагрузки сеть не заводится в сети не видится. на мониторе "квадрат малевича" Уже сколько раз говорилось ... монитор отключать нужно ... 21 минуту назад, alexku44 сказал: заменил два файла extra.lzma v 0.8 syno каталог update грохал? Quote Link to comment Share on other sites More sharing options...
alexku44 Posted April 17, 2020 Share #25 Posted April 17, 2020 5 минут назад, lotusd сказал: А вы пробовали версию syno? вот только что закончил, пробовал все три версии. сеть не заводится. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.