Peter Suh
-
Posts
2,646 -
Joined
-
Last visited
-
Days Won
139
Everything posted by Peter Suh
-
this is my pc. CPU : i3-4160T M/B : DT-H81DL GAIDA LAN : RealTek r8111F DUAL RAID : Dell Perc H310 , IT Mode LOADER : Tinycore 0.4.5 Native EXT : r8169, mpt3sas DSM : DS3622xs+ 7.0.1 HDD : 4ea Sata Drives
-
The first shr-generated multi-disk combination I tried was a test of 0.6 TB + 2 TB + 2 TB + 3 TB. After the RAM issue occurred, the storage pool and volume were deleted, and abnormal restart occurred in this process. Since this restart, the storage pool has been deleted and there have been no other errors. I don't know if I know exactly, but the mpt3sas driver seems to have been updated from version 22 to 41, so I'm rebuilding the loader and watching for 18 hours after creating it with SHR 2TB+ 2TB+3TB. No other abnormal symptoms have been seen yet.
-
There was a similar phenomenon in my DS3622xs+ SHR. SHR was first configured with four SATA HDD. Unexpectedly, I needed a day of restructuring. My 8GB of RAM was using almost 95% of the resources. So, I deleted the storage pool and volume and made SHR again with only one disk, and did not attempt to reconstruct it. If there is another attempt to reconstruct with two or more disks and another lack of RAM resources occurs, it plans to report it to @pocopico
-
It was applied as informed and can be rebooted and terminated normally now. Thank you so much, Aigor.
-
@pocopico I will further review whether the mpt3sas of ds918+ is necessary and request it to Github's issue. However, ds3622xs+ cannot be terminated or rebooted not only during DSM installation but also during normal times. The sudo reboot or sudo poweroff command is also unavailable. You know that, right?
-
@pocopico I succeeded in Tinycore Redfill v0.4.5 and DS3622xs+ H310 !!!!!. I deactivated the internal Sata port to use only H310. I erased the SatarPortMap or DiskIdxMap options at all. DS3622xs+, which was released late last year, seems to be only supported by DSM 7. And SHR, which I was worried about, is being supported by default. Instead, transcoding is not supported. In my case, I don't need transcoding, so I'm considering migration from DS918+ 6.2.3 to DS3622xs+ 7.0.1. Do you have any plans to apply ext mpt3sas, which was applied first to DS3622xs+, to other models than DS918+? Thank you for your hard work. CPU : i3-4160T M/B : DT-H81DL GAIDA LAN : RealTek r8111F DUAL RAID : Dell Perc H310 , IT Mode LOADER : Tinycore Redpill 0.4.5 Native EXT : r8169, mpt3sas DSM : DS3622xs+ 7.0.1 HDD : 4ea Sata Drives
-
Was there no sataportmap, diskIdxMap option? Or is it completely erased?
-
Has the built-in SATA Port been disabled? Can you tell me the sataportmap and diskIdxMap settings?
-
@pocopico CPU : i3-4160T M/B : DT-H81DL GAIDA LAN : RealTek r8111F DUAL RAID : Dell Perc H310 , IT Mode LOADER : Tinycore 0.4.5 Native EXT : r8169, mpt3sas DSM : DS918+ 7.0.1 HDD : 4x3TB Sata Drives The results of the extended test with only H310 in ds918+ DSM 7.0.1 showed unfortunate results. Disable built-in SATA ports and install only one HDD on sataportmap=1, DiskIdxMap=00. DSM of DS918+ was successfully installed. After that, I installed three additional sata HDDs and changed sataportmap values from 0 to 9 different ways. The conclusion is that S.M.A.R.T. information is not fully linked. Only one or two out of four are linked to S.M.A.R.T., and the rest are null in front of the disk name and cannot be linked. A virtual S/N that starts with V appears in S/N, and once I see this serial, I can use it as a normal volume. It feels like a situation similar to the S.M.A.R.T issue of the extended driver 0.13.3 version of the mpt3sas.ko driver during the jun loader. Jun loader had a separate version of extension driver 0.12.1 due to HBA S.M.A.R.T issue.
-
Central time 11 a.m. is around 1 a.m. in Taiwan or Beijing. I think this is Synology's regular PM time.
-
This 6.2.3 extra driver also resolves the disappearance of the LAN without a monitor line or HDMI DUMMY PLUG. Thank you. IG-88 -
I answer the last question myself. Downgrading to DS918+ DSM VERSION 6.2.1. However, if I unplug the HDMI CABLE, the Ethernet disappears. So, I bought and installed the HDMI DUMMY PLUG. In this case, Ethernet does not disappear and the connection persists. Perhaps, even the latest version of DS918+ DSM VERSION 6.2.2 DUMMY PLUG would have been helpful. Thanks.
-
This is the result of accessing the DSM with SSH. ----------------------------------------------------------- admin@NAS4:/$ lspci -k | grep 'Kernel Driver' Kernel driver in us: hsw_uncore Kernel driver in us: i915 Kernel driver in us: xhci_hcd Kernel driver in us: serial Kernel driver in us: e1000e Kernel Driver in Us: Ehci-pci Kernel driver in us: pcieport Kernel driver in us: pcieport Kernel Driver in Us: Ehci-pci Kernel driver in us: lpc_ich Kernel driver in us: ahci Kernel driver in us: i801_smbus ------------------------------------------------------- Will this information help? The same original 1.04b bootloader as mine and DS918+ DSM 6.2.2 have the same symptoms as the same person who has experienced the same symptoms of not being able to find Ethernet. I heard that he has solved the problem by downgrading to DS918+ DSM 6.2.1. First of all, I will try the DSM downgrade before using the 1.02b bootloader. Thanks.
-
I tried to boot without connecting the monitor as you gave me the guide with the bootloader with the 0.8 patch I mentioned above. But again, it doesn't find Ethernet. The 1.04b original bootloader also does not find Ethernet. Reconnecting the monitor line does not change the phenomenon. The models on the main board differ cautiously, but many other users in Korea say the same thing. It won't be easy to solve this problem, will it?
-
Sorry for posting the same thing in multiple threads. Thank you for managing duplicate posts.
-
Hi When I disconnect the HDMI cable from the iGPU HDMI port on the main board or from the HDMI port on the monitor, the Ethernet port disappears. When I reconnect the HDMI cable, the Ethernet port will work again. Not only HDMI cables, but also DVI and RGB. The bootloader version is 1.04b. Bootloader 1.04b was modified with (0.8_syno ds918+ - extra.lzma/extra2.lzma for loader 1.04b_mod ds918+ DSM 6.2.2 v0.8_syno). Use the DS918+ DSM 24922 version. The main board and the CPU are GIGABYTE GA-B85N Phoenix-WIFI, i5-4690. Ethernet is Intel. Is there any solution?
