Leaderboard

J'ai swappé les 2 barrettes de RAM et maintenant la machine me remonte bien 8Go

Please give us even less details on your configuration, it will of course help us to know nothing about your setup, loader, hardware...

it still possible to do it in place but you should have some knowledge about linux and the will to learn something now on the way as it will take some time to prepare (depends on how much value has time to be invested)

you would need to compile you own driver for that old dsm version (kernel 3.2.40) and that might be way more complicated then using a new loader an dsm version the hardware would still be working with dsm 7.x https://xpenology.com/forum/topic/64619-dsm-711-42962/?do=findComment&comment=346221 https://xpenology.com/forum/topic/64619-dsm-711-42962/?do=findComment&comment=347902 https://xpenology.com/forum/topic/64619-dsm-711-42962/?do=findComment&comment=348669 not sure what loader that is but the one i have here only supports a very limited number of hardware, not even a 10G nic seems to be there if you shy away from setting up all new (might be needed when the system/swat partition is to small for upgrading to a recent dsm version - 2 GB and 2.4GB is the standard since at least dsm 5.x) you can still try to switch to open media vault by using a usb flash drive on it just set up the usb flash drive on another computer completely and if its working properly boot you n54l with that one, you data (raid) volume should be usable that way (and here is no change in your now running system, if anything is off or not to your liking you can remove the usb drive and be back to normal with your former usb with the 4x loader) it gets way more messy if start upgrading dsm, in most cases you cant go back if the upgrade fails for soem reason and you need to take care of things yourself the hard way if the partition size for (dsm) system and swat does not match then its going to be a offload of all data and setting up new personal i would suggest setting up a more recent new hardware with new disks, transfer all data and then set up the old hardware with a newer dsm version and use the old hardware for backups of the new system

Почитайте...

Не мистика, а результат работы нескольких команд, которые пилили мобильные приложения для разных сервисов на свое усмотрение 🤣 У меня так работает: прописан домен как на картинке, на роутере проброшен только 443 порт на 443 порт хрени, установлены серты на хрени на этот домен. В кинетике, наверное, это же можно сделать через встроенный в него реверс-прокси. После этого все приложения на огрызке спокойно заходят по адресу my-domain.xyz:443 с флагом https, как во внутренней сетке, так и снаружи. P.S. my-domain.xyz - вымышленное имя, но как оказалось, оно существует на просторах инета, правда без ssl 😁

I've getted from this thread: I not have an intel 9th or 10th to tests, then please test. The module is only compiled for apollolake and geminilake (10th up) and only apollolake for 9th or less

You can download and manual install from panel control DSM https://archive.synology.com/download/Os/DSM/7.1.1-42962-2

@J3d1UK i had similar issue with my HP GEN9 DL160 and P440 RaidCard.. i switched back to ESXI Host on the DL160. and i noticed the same Speed Issue as i started to transfer the Data. as i use this as only Storage System and not Productiv its OK for me

Извините, а как вы изменили sn на флешке без перестановки dsm