koszyk

Problem with ASROCK J3455B-ITX

Recommended Posts

Hi Everyone,

I have got a problem with installation DS916+. Details in attachment. Got any ideas?

 

log  

 

-patching file etc/passwd
patching file etc/rc
Hunk #1 succeeded at 173 (offset 10 lines).
patching file etc/synoinfo.conf
Hunk #2 succeeded at 273 (offset 3 lines).
Hunk #3 succeeded at 283 (offset 4 lines).
Hunk #4 succeeded at 299 (offset 4 lines).
patching file etc/synoinfo_8G.conf
Hunk #2 succeeded at 283 (offset 4 lines).
patching file linuxrc.syno
Hunk #1 succeeded at 39 (offset 2 lines).
Hunk #2 succeeded at 118 with fuzz 2 (offset 2 lines).
Hunk #3 succeeded at 479 (offset 95 lines).
patching file usr/sbin/init.post
START /linuxrc.syno
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore ... [  OK  ]
:: Loading module ohci-hcd ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module usb-storage ... [  OK  ]
:: Loading module BusLogic ... [  OK  ]
:: Loading module vmw_pvscsi ... [  OK  ]
:: Loading module megaraid_mm ... [  OK  ]
:: Loading module megaraid_mbox ... [  OK  ]
:: Loading module megaraid ... [  OK  ]
:: Loading module megaraid_sas ... [  OK  ]
Insert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
Partition Version=8
 /sbin/e2fsck exists, checking /dev/md0...
1.42.6-15217:                                                                   /lost+found not found.  CREATED.
          42 inodes used (0.03%, out of 155648)
           0 non-contiguous files (0.0%)
           0 non-contiguous directories (0.0%)
             # of inodes with ind/dind/tind blocks: 0/0/0
             Extent depth histogram: 32/1
      195165 blocks used (31.35%, out of 622544)
           0 bad blocks
           1 large file
          24 regular files
           8 directories
           0 character device files
           0 block device files
           0 fifos
           0 links
           0 symbolic links (0 fast symbolic links)
           0 sockets
------------
          32 files
/sbin/e2fsck returns 1
Mounting /dev/md0 /tmpRoot
------------upgrade
Begin upgrade procedure
Found an upgrade file on data volume. Begin upgrade
Checksum of system tarball verified.
/tmpRoot//etc ->        /tmpRoot/.upd@te/etc/
/tmpRoot//var ->        /tmpRoot/.upd@te/var/
Removing /tmpRoot/.upd@te//etc/ftpusers...
Removing /tmpRoot/.upd@te//etc/rc...
Removing /tmpRoot/.upd@te//etc/rc.network...
Removing /tmpRoot/.upd@te//usr/syno/etc/rc.atalk...
Removing /tmpRoot/.upd@te//usr/syno/etc/.htpasswd...
Removing /tmpRoot/.upd@te//usr/syno/etc/lpd/lpd.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/printcap...
Removing /tmpRoot/.upd@te//usr/syno/etc/ups.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/upsd.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/upsd.users...
Removing /tmpRoot/.upd@te//usr/syno/etc/upsmon.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/upssched.conf...
Removing /tmpRoot/.upd@te//etc/lvm/lvm.conf...
Removing /tmpRoot/.upd@te//usr/local/etc/rc.d/SynoEnablePersonalServices.sh...
Removing /tmpRoot/.upd@te//etc/rc.network_routing...
Removing /tmpRoot/.upd@te//usr/syno/etc/rc.tun...
Removing /tmpRoot/.upd@te//usr/syno/etc/afpd.conf...
Removing /tmpRoot/.upd@te//etc/pam.d/samba...
Removing /tmpRoot/.upd@te//etc/ppp/ip-up...
Removing /tmpRoot/.upd@te//etc/ppp/ip-down...
Removing /tmpRoot/.upd@te//etc/ppp/ip-function...
Removing /tmpRoot/.upd@te//etc/ppp/ipv6-up...
Removing /tmpRoot/.upd@te//etc/ppp/ipv6-down...
Removing /tmpRoot/.upd@te//etc/ppp/options...
Removing /tmpRoot/.upd@te//usr/local/cups/mime.types...
Removing /tmpRoot/.upd@te//usr/local/cups/mime.convs...
Removing /tmpRoot/.upd@te//etc/cups/cupsd.conf...
Removing /tmpRoot/.upd@te//usr/local/cups/cupsd.conf...
Removing /tmpRoot/.upd@te//usr/local/cups/testprint...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/bannertops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/commandtops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/gziptoany...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/imagetops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/imagetoraster...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/pdftops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/pstops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertoepson...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertohp...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertolabel...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertopwg...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/texttops...
Removing /tmpRoot/.upd@te//usr/local/cups/filter/hpgltops...
Removing /tmpRoot/.upd@te//etc/hostapd/stainfo.sh...
Removing /tmpRoot/.upd@te//etc/hostapd/mac_filter/mfscript.sh...
Removing /tmpRoot/.upd@te//usr/syno/etc/rfkill.sh...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_guest_net.sh...
Removing /tmpRoot/.upd@te//etc/ld.so.preload...
Removing /tmpRoot/.upd@te//etc/tc/default.cmd...
Removing /tmpRoot/.upd@te//usr/syno/etc/ssl/mkcert.sh...
Removing /tmpRoot/.upd@te//usr/syno/etc/ssl/mkcgikey.sh...
Removing /tmpRoot/.upd@te//etc/logrotate.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/usbmodem/wcdma_list.json...
Removing /tmpRoot/.upd@te//usr/syno/etc/usbmodem/usb_modeswitch.d/*...
Removing /tmpRoot/.upd@te//etc/php/php.ini...
Removing /tmpRoot/.upd@te//etc/php/php-fpm.conf...
Removing /tmpRoot/.upd@te//etc/php/conf.d/opcache.ini...
Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d/global.setting...
Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d/system.cfg...
Removing /tmpRoot/.upd@te//usr/syno/etc/ssdp/dsm_desc.xml...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_time_ctrl.sh...
Removing /tmpRoot/.upd@te//etc/profile...
Removing /tmpRoot/.upd@te//etc/inputrc...
Removing /tmpRoot/.upd@te//etc/dhclient/dhclient-script...
Removing /tmpRoot/.upd@te//etc/dhclient/ipv4/dhclient.conf...
Removing /tmpRoot/.upd@te//etc/dhclient/ipv6/dhclient.conf...
Removing /tmpRoot/.upd@te//usr/syno/etc/www/SSLProfile.json...
Removing /tmpRoot/.upd@te//etc/vimrc...
Removing /tmpRoot/.upd@te//usr/syno/etc/cacert.pem...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_modules_list...
Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_chain_list...
Removing /tmpRoot/.upd@te//usr/local/bin/python*...
Removing /tmpRoot/.upd@te//etc/sudoers...
Removing /tmpRoot/.upd@te//usr/syno/etc/openldap/ldap.conf...
Removing /tmpRoot/.upd@te//etc/pam.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/vfs...
Removing /tmpRoot/.upd@te//var/run...
Removing /tmpRoot/.upd@te//var/state/ups...
Removing /tmpRoot/.upd@te//usr/syno/etc/ups...
Removing /tmpRoot/.upd@te//var/spool/postfix...
Removing /tmpRoot/.upd@te//usr/local/cups/backend...
Removing /tmpRoot/.upd@te//usr/local/cups/mime...
Removing /tmpRoot/.upd@te//etc/fw_security/sysconf...
Removing /tmpRoot/.upd@te//etc/init...
Removing /tmpRoot/.upd@te//etc/logrotate.d...
Removing /tmpRoot/.upd@te//etc/syslog-ng...
Removing /tmpRoot/.upd@te//var/lib/dpkg...
Removing /tmpRoot/.upd@te//etc/httpd/conf...
Removing /tmpRoot/.upd@te//etc/postgresql...
Removing /tmpRoot/.upd@te//etc/nginx...
Removing /tmpRoot/.upd@te//etc/wide-dhcpv6...
Removing /tmpRoot/.upd@te//etc/apparmor.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d...
Removing /tmpRoot/.upd@te//var/dynlib...
Removing /tmpRoot/.upd@te//etc/iproute2/script...
Removing /tmpRoot/.upd@te//etc/ssl/certs...
Removing /tmpRoot/.upd@te//etc/dbus-1...
Removing /tmpRoot/.upd@te//usr/syno/etc/dbus-1...
Removing /tmpRoot/.upd@te//etc/avahi...
Removing /tmpRoot/.upd@te//usr/syno/etc/synovpnclient/scripts...
Removing /tmpRoot/.upd@te//var/lib/apparmor...
Removing /tmpRoot/.upd@te//usr/syno/etc/www/app.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/rc.d...
Removing /tmpRoot/.upd@te//usr/syno/etc/bluetooth/...
Removing /tmpRoot/.upd@te//usr/syno/etc/smallupdate_patch...
Removing /tmpRoot/.upd@te//etc/ImageMagick-6...
chmod: /tmpRoot/.upd@te/root: No such file or directory
cp: can't stat '/tmpRoot/etc.defaults/VERSION': No such file or directory
cp: can't stat '/tmpRoot/etc.defaults/synoinfo.conf': No such file or directory
cp: can't stat '/tmpRoot/.system_info': No such file or directory
Setting up swapspace version 1, size = 2147414016 bytes
Untaring /tmpRoot/.SynoUpgrade.tar...
cp: can't create '/tmpRoot/*': No such file or directory
[   16.460728] BUG: unable to handle kernel NULL pointer dereference at 0000000000000011
[   16.468916] IP: [<ffffffff81359ea1>] syno_ahci_disk_led_enable+0x31/0x180
[   16.476022] PGD 1746a1067 PUD 174695067 PMD 0
[   16.480710] Oops: 0000 [#1] SMP
[   16.484122] Modules linked in: braswell_synobios(PO+) etxhci_hcd megaraid_sas megaraid megaraid_mbox megaraid_mm vmw_pvscsi BusLogic usb_storage xhci_hcd ohci_hcd usbcore usb_common el000(O) [last unloaded: braswell_synobios]
[   16.505285] CPU: 0 PID: 4210 Comm: insmod Tainted: P           O 3.10.102 #15217
[   16.513008] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J3455B-ITX, BIOS P1.30 07/14/2017
[   16.523057] task: ffff88017a7fb040 ti: ffff88012f370000 task.ti: ffff88012f370000
[   16.530866] RIP: 0010:[<ffffffff81359ea1>]  [<ffffffff81359ea1>] syno_ahci_disk_led_enable+0x31/0x180
[   16.540532] RSP: 0018:ffff88012f373cd8  EFLAGS: 00010202
[   16.546084] RAX: ffff8801781b4000 RBX: 0000000000000001 RCX: ffff8801762014b0
[   16.553526] RDX: 000000000000000a RSI: 0000000000000000 RDI: ffff8801781b4380
[   16.561016] RBP: ffff88012f373ee8 R08: 00000000000024c0 R09: 00000000000024c0
[   16.568518] R10: 0000000000002640 R11: 0000000000002640 R12: ffff8801781b4000
[   16.575978] R13: 0000000000000001 R14: 0000000000000001 R15: ffffffffa01025c0
[   16.583504] FS:  00007f6d1f394700(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000
[   16.592005] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.598042] CR2: 0000000000000011 CR3: 000000012dc15000 CR4: 00000000003407f0
[   16.605493] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   16.612960] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   16.620435] Stack:
[   16.622558]  ffffffffa00fb250 ffff88012f373ee8 0000000000000000 ffffffffa0102610
[   16.630373]  0000000000000001 ffffffffa01025c0 ffffffffa00fe695 ffffffff8182d040
[   16.638192]  0000000000000001 ffffffffa01025c0 ffffffff81160faf 0000010a00000002
[   16.646002] Call Trace:
[   16.648577]  [<ffffffffa00fb250>] ? remove_card_detect_proc+0x20/0x20 [braswell_synobios]
[   16.657123]  [<ffffffffa00fe695>] ? synobios_model_init+0x1a5/0x390 [braswell_synobios]
[   16.665491]  [<ffffffff81160faf>] ? proc_alloc_inum+0x2f/0xb0
[   16.671520]  [<ffffffff811610c9>] ? proc_register+0x99/0x140
[   16.677411]  [<ffffffff81161259>] ? proc_mkdir_data+0x49/0x70
[   16.683445]  [<ffffffffa00fb250>] ? remove_card_detect_proc+0x20/0x20 [braswell_synobios]
[   16.691999]  [<ffffffffa00fb2be>] ? synobios_init+0x6e/0x490 [braswell_synobios]
[   16.699789]  [<ffffffffa00fb250>] ? remove_card_detect_proc+0x20/0x20 [braswell_synobios]
[   16.708390]  [<ffffffff810003aa>] ? do_one_initcall+0xea/0x140
[   16.714559]  [<ffffffff81089a13>] ? load_module+0x1b93/0x2110
[   16.720587]  [<ffffffff810869a0>] ? store_uevent+0x40/0x40
[   16.726319]  [<ffffffff8108a024>] ? SYSC_init_module+0x94/0xc0
[   16.732426]  [<ffffffff814a64f2>] ? system_call_fastpath+0x16/0x1b
[   16.738879] Code: 56 41 55 44 8d 2e 41 54 55 53 e8 fb df fb ff 48 85 c0 4c 8d 20 0f 84 54 01 00 00 48 8b 98 08 05 00 00 48 85 db 0f 84 3d 01 00 00 <48> 8b 7b 10 48 8b ab 48 32 00 00 e8 df bb 14 00 31 d2 31 ff 48
[   16.759962] RIP  [<ffffffff81359ea1>] syno_ahci_disk_led_enable+0x31/0x180
[   16.767181]  RSP <ffff88012f373cd8>
[   16.770860] CR2: 0000000000000011
[   16.774442] ---[ end trace baaa7e263ac392cb ]---
Killed
mknod: /dev/synobios: File exists
Starting /usr/syno/bin/synohdcfgen...
/usr/syno/bin/synohdcfgen returns 255
rmmod: can't unload 'braswell_synobios': Device or resource busy
End upgrade procedure
============upgrade
Wait 2 seconds for synology manufactory device
Mon Jan 22 16:18:29 UTC 2018
/dev/md0 /tmpRoot ext4 rw,relatime,journal_checksum,data=ordered 0 0
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,s[   26.034363] VFS: opened file in mnt_point: (/dev), file: (/ttyS1)
ize=1847400k,nr_inodes=461850,mode=755 0 0
umou[   26.045826] VFS: opened file in mnt_point: (/dev), file: (/ttyS1)
nt: can't umount /dev: Device or resource busy
proc /proc proc rw,relatime 0 0
linuxrc.syno executed successfully.
Post init
mount: mounting none on /dev failed: Device or resource busy
[   26.113230] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
fgrep: /tmpRoot/etc/rc: No such file or directory
/tmpRoot/usr/bin/sed: can't read /tmpRoot/etc/rc: No such file or directory
fgrep: /tmpRoot/etc/rc.subr: No such file or directory
/tmpRoot/usr/bin/sed: can't read /tmpRoot/etc/rc.subr: No such file or directory
Installing /tmpRoot//usr/lib/modules/update/BusLogic.ko...
Installing /tmpRoot//usr/lib/modules/update/vmw_pvscsi.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid_mm.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid_mbox.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid.ko...
Installing /tmpRoot//usr/lib/modules/update/megaraid_sas.ko...
Installing /tmpRoot//usr/lib/modules/update/mii.ko...
Installing /tmpRoot//usr/lib/modules/update/mdio.ko...
Installing /tmpRoot//usr/lib/modules/update/libphy.ko...
Installing /tmpRoot//usr/lib/modules/update/atl1.ko...
Installing /tmpRoot//usr/lib/modules/update/atl1e.ko...
Installing /tmpRoot//usr/lib/modules/update/atl1c.ko...
Installing /tmpRoot//usr/lib/modules/update/alx.ko...
Installing /tmpRoot//usr/lib/modules/update/uio.ko...
Installing /tmpRoot//usr/lib/modules/update/ipg.ko...
Installing /tmpRoot//usr/lib/modules/update/jme.ko...
Installing /tmpRoot//usr/lib/modules/update/skge.ko...
Installing /tmpRoot//usr/lib/modules/update/sky2.ko...
Installing /tmpRoot//usr/lib/modules/update/ptp_pch.ko...
Installing /tmpRoot//usr/lib/modules/update/pch_gbe.ko...
Installing /tmpRoot//usr/lib/modules/update/qla3xxx.ko...
Installing /tmpRoot//usr/lib/modules/update/qlcnic.ko...
Installing /tmpRoot//usr/lib/modules/update/qlge.ko...
Installing /tmpRoot//usr/lib/modules/update/netxen_nic.ko...
Installing /tmpRoot//usr/lib/modules/update/sfc.ko...
Installing /tmpRoot//usr/lib/modules/update/e1000.ko...
Installing /tmpRoot//usr/lib/modules/update/pcnet32.ko...
Installing /tmpRoot//usr/lib/modules/update/vmxnet3.ko...
Installing /tmpRoot//usr/lib/modules/update/bnx2.ko...
Installing /tmpRoot//usr/lib/modules/update/cnic.ko...
Installing /tmpRoot//usr/lib/modules/update/ixgbe.ko...
Installing /tmpRoot//usr/lib/modules/update/r8168.ko...
Installing /tmpRoot//usr/lib/modules/update/r8169.ko...
Installing /tmpRoot//usr/lib/modules/update/tg3.ko...
Installing /tmpRoot//usr/lib/modules/update/usbnet.ko...
Installing /tmpRoot//usr/lib/modules/update/ax88179_178a.ko...
Installing /tmpRoot//usr/lib/modules/update/ohci-hcd.ko...
Installing /tmpRoot//usr/lib/firmware/bnx2/bnx2-rv2p-09ax-6.0.17.fw...
Installing /tmpRoot//usr/lib/firmware/bnx2/bnx2-rv2p-09-6.0.17.fw...
Installing /tmpRoot//usr/lib/firmware/bnx2/bnx2-rv2p-06-6.0.15.fw...
Installing /tmpRoot//usr/lib/firmware/tigon/tg3_tso5.bin...
Installing /tmpRoot//usr/lib/firmware/tigon/tg3_tso.bin...
Installing /tmpRoot//usr/lib/firmware/tigon/tg3.bin...
[   26.716327] VFS: opened file in mnt_point: (/dev), file: (/ttyS1)
umount: can't umount /dev: Device or resource busy
[   27.758739] EXT4-fs (md0): re-mounted. Opts: (null)
[   36.973783] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   36.979152] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   37.434484] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k
[   37.908743] zram: module is from the staging directory, the quality is unknown, you have been warned.
[   37.919128] zram: Created 4 device(s) ...
[   37.951596] Adding 556028k swap on /dev/zram0.  Priority:1 extents:1 across:556028k SS
[   37.975395] Adding 556028k swap on /dev/zram1.  Priority:1 extents:1 across:556028k SS
[   37.999155] Adding 556028k swap on /dev/zram2.  Priority:1 extents:1 across:556028k SS
[   38.022809] Adding 556028k swap on /dev/zram3.  Priority:1 extents:1 across:556028k SS
==================== start udevd ====================
[   46.376845] NET: Registered protocol family 10
[   46.424745] sit: IPv6 over IPv4 tunneling driver
[   46.938279] init: syno-auth-check main process (5545) killed by TERM signal
[   47.715603] ACPI: Requesting acpi_cpufreq
[   48.536932] systemd-udevd[5865]: starting version 204
===== trigger device plug event =====
[   48.609632] fuse init (API version 7.22)
[   48.625662] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI
[   48.632072] e1000e: Copyright(c) 1999 - 2016 Intel Corporation.
[   48.947976] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3
[   48.954835] Copyright (c) 2007-2015 Intel Corporation.
[   49.033212] ixgbe: Unknown symbol mdio_mii_ioctl (err 0)
[   49.038918] ixgbe: Unknown symbol mdio45_probe (err 0)
[   49.140812] r8168 Gigabit Ethernet driver 8.044.02-NAPI loaded
[   49.147238] r8168 0000:02:00.0: irq 140 for MSI/MSI-X
[   49.166415] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[   49.178331] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com>
[   49.178331]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[   49.178331]  This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[   49.423966] Loading modules backported from Linux version v3.18.1-0-g39ca484
[   49.431409] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
[   49.824676] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[   49.833325] ACPI: Power Button [PWRB]
[   49.888152] Linux agpgart interface v0.103
[   50.038233] [drm] Initialized drm 1.1.0 20060810
[   50.183270] bio: create slab <bio-1> at 1
[   50.188604] Btrfs loaded
[   50.212661] exFAT: Version 1.2.9
[   50.300831] jme: JMicron JMC2XX ethernet driver version 1.0.8
[   50.321665] sky2: driver version 1.30
[   50.340672] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01
[   50.363190] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42
[   50.385483] QLogic/NetXen Network Driver v4.0.80
[   50.398421] Solarflare NET driver v3.2
[   50.410179] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[   50.417583] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   50.431440] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[   50.446227] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI
[   50.476927] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
[   50.501218] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.13.10-k
[   50.509438] ixgbe: Copyright (c) 1999-2013 Intel Corporation.
[   50.554989] usbcore: registered new interface driver ax88179_178a

 

Hide  

 

Share this post


Link to post
Share on other sites

only thing i can see that "syno_ahci_disk_led_enable" comes from libahci.c so the crash seems ahci related and that is part of the precompiled original synology kernel

the board seems to be widely used here with the 916+ image so we can rule out a general incompatibility

 

check ram with ram test of a bootable linux disk

maybe try different cable and disk?

 

 

https://xpenology.com/forum/topic/9761-dsm614-sn-apollo-lake-dts-audio-plex-hardware-transcoding/

 

 

Share this post


Link to post
Share on other sites

maybe check bios/uefi settings

i got the exact same board. it works with xpenology-916+ image

Share this post


Link to post
Share on other sites

Thanks for reply.

Different cable - no difference.

Ram checked and all is ok (I also try another one - no difference). I also changed the settings in bios. 

 

Share this post


Link to post
Share on other sites

Recommendations:

Reset Bios. Update it if any update available. Disable any unnecessary functions or devices in the Bios.

Re-download the .pat file.

Re-burn the loader onto the USB boot drive.

Try again.

Let us know how it goes.

Share this post


Link to post
Share on other sites

I checked everything I could in BIOS. New .pat file on new pendrive. Also I tried other hard disk. Always after instalation, stopped working at the same moment (Logs attachment).

Share this post


Link to post
Share on other sites

Maybe try the 3615 image?

i realise you may want the 916/3455 Cpu features, but a test of this image might show the same errors or none, so pointing to a hardware issue

i've been running the 3615 6.1 image on a 3455m flawlessly for over a year.

Share this post


Link to post
Share on other sites
9 hours ago, sbv3000 said:

Maybe try the 3615 image?

i realise you may want the 916/3455 Cpu features, but a test of this image might show the same errors or none, so pointing to a hardware issue

i've been running the 3615 6.1 image on a 3455m flawlessly for over a year.

 

Strange thing is that @nevusZ (see 3 posts above) has the same board and it works for him with the 916+ loader. :35_thinking:

Share this post


Link to post
Share on other sites

My mistake;) I try 3615/3617 and works flawlessly. But I wanted to use hw transcoding. @nevusZ have ASROCK J-3455-ITX (4xSATA3, M.2 socket), mine motherboard (J3455B-ITX) have only 2xSATA without M.2. I suppose it's different here.

Share this post


Link to post
Share on other sites
1 hour ago, koszyk said:

My mistake;) I try 3615/3617 and works flawlessly. But I wanted to use hw transcoding. @nevusZ have ASROCK J-3455-ITX (4xSATA3, M.2 socket), mine motherboard (J3455B-ITX) have only 2xSATA without M.2. I suppose it's different here.

 

Perhaps that might be it. Stick to 3615xs it's the most used loader by members and works fine.

Share this post


Link to post
Share on other sites

As a test I will try the 916 image on my spare j3455M

It has 2 sata but 3 pci slots (2 x1 and 1 x4/8/16), but should be the same otherwise

Share this post


Link to post
Share on other sites

sorry, i don't have the same board
mine is ASROCK J3455-ITX without B

Edited by nevusZ

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now