Trantor Posted October 20, 2013 Author Share #26 Posted October 20, 2013 Having LOT of issue with this card !! Yesterday it work on debian 7, today no way to get it up I found on some forums that it's maybe related to an IRQ issue (will try to clear CMOS) It's handled by the r8169 included in the kernel source (the r8169 from realtek website doesn't work for this card). Unfortunately this driver is full of bugs (miss detect some r8168 chips for example) so I edit the source to remove the support for r8168 based card (let that part to the r8168 driver). I hope this will prevent conflict when both drivers will be loaded. When I will succeed to get my DGE-528T card to work again on my debian (with built-in r8169 driver), I will try my patched driver on XPEnology ^^ Link to comment Share on other sites More sharing options...
echris Posted October 20, 2013 Share #27 Posted October 20, 2013 Having LOT of issue with this card !!Yesterday it work on debian 7, today no way to get it up I found on some forums that it's maybe related to an IRQ issue (will try to clear CMOS) It's handled by the r8169 included in the kernel source (the r8169 from realtek website doesn't work for this card). Unfortunately this driver is full of bugs (miss detect some r8168 chips for example) so I edit the source to remove the support for r8168 based card (let that part to the r8168 driver). I hope this will prevent conflict when both drivers will be loaded. When I will succeed to get my DGE-528T card to work again on my debian (with built-in r8169 driver), I will try my patched driver on XPEnology ^^ Ok, hope you will succeed. Thank you Link to comment Share on other sites More sharing options...
ad911 Posted October 21, 2013 Share #28 Posted October 21, 2013 Hi requested to include the Broadcom BCM57788 driver http://www.broadcom.com/support/etherne ... etlink.php thanks Link to comment Share on other sites More sharing options...
clunc Posted October 22, 2013 Share #29 Posted October 22, 2013 Hi trantor the next repack will it have updatings for chipset haswell ?? Link to comment Share on other sites More sharing options...
Trantor Posted October 22, 2013 Author Share #30 Posted October 22, 2013 Broadcom BCM57788 driver http://www.broadcom.com/support/etherne ... etlink.php This is the tg3 driver which is already included in the repack, but it maybe miss firmware in my build. Can you give me more informations about your hardware and what's not working ? Hi trantorthe next repack will it have updatings for chipset haswell ?? What's not working ? Haswell support start with kernel 3.10.... Link to comment Share on other sites More sharing options...
clunc Posted October 23, 2013 Share #31 Posted October 23, 2013 [ Hi trantorthe next repack will it have updatings for chipset haswell ?? What's not working ? Haswell support start with kernel 3.10.... for intel DG87RL viewtopic.php?f=2&t=1082&p=6453#p6453 asus : viewtopic.php?f=2&t=1081&p=5600#p5600 are they problems of driver? (i have to purchase mb with haswell ..with few problems ) Link to comment Share on other sites More sharing options...
ad911 Posted October 23, 2013 Share #32 Posted October 23, 2013 Broadcom BCM57788 driver http://www.broadcom.com/support/etherne ... etlink.php This is the tg3 driver which is already included in the repack, but it maybe miss firmware in my build. Can you give me more informations about your hardware and what's not working ? Hi trantorthe next repack will it have updatings for chipset haswell ?? What's not working ? Haswell support start with kernel 3.10.... It is J&W MINIX™ H61M-USB3 mainboard http://www.jwele.com/motherboard_detail.php?1035 with two discontinued Broadcom NetLink BCM57788 It works on Ubuntu 13.04 live CD, it works fine, the chips can be detected reported by lspci command 02:00.0 Ethernet controller: Broadcom corporation NetLink BCM57788 Gigabit Ethernet PCIe (rev 01) 03:00.0 Ethernet controller: Broadcom corporation NetLink BCM57788 Gigabit Ethernet PCIe (rev 01) running on 4.2-3211 V1.2, it cannot get the ip address from DHCP server seems that the tg3 driver is not loaded or something else thanks for your help Link to comment Share on other sites More sharing options...
costib Posted October 23, 2013 Share #33 Posted October 23, 2013 (edited) Hi,Simple suggestion: Please, add all drivers related to virtualization. Several of them are included in the source of the Linux kernel. This will facilitate the deployment inside VMware, Hyper-V and Virtualbox. Best! Can you make a list of required options to build ? I read in the hyper-v that the built-in drivers are staging are very buggy... Not the full list, only a few: * For VMWARE: - PVSCSI: vmw_pvscsi.ko - VMXNET3: vmxnet3.ko - VMCI: vmw_vmci.ko & vmw_vsock_vmci_transport.ko - Ballon: vmw_balloon.ko ............................... After a kernel with all modules enabled will be more easy to add a "tools" package for guest shutdown and other commands. Futhermore, the performance improvement with paravirtualization it's a must have! Should I suppose that same drivers apply also to ESXi? Currently version 4.2-3211-v1.2 converted for ESXi cannot use PVSCSI. I have to use esxi_install_3202_v2 from jukolaut and odie82544 for physical RDM. Thanks Edited October 25, 2013 by Guest Link to comment Share on other sites More sharing options...
Trantor Posted October 24, 2013 Author Share #34 Posted October 24, 2013 Should I suppose that same drivers apply also to ESXi? Currently version 4.2-3211-v1.2 converted for ESXi cannot use PVSCSI. I have to use esxi_install_3202_v2 from jukolaut for physical RDM. Thanks Strange because pvscsi is built-in the kernel in 4.2-3211 v1.2. I will try to build this as module in my coming testing build. Do you have more informations (kernel options, driver, modules) about paravirtualization ? Link to comment Share on other sites More sharing options...
costib Posted October 24, 2013 Share #35 Posted October 24, 2013 I was wondering the same thing, because from your change-log it looks like SCSI: VMware PVSCSI driver is included. But, as reported also by other users on the forum, we were unable to make a complete installation on ESXi, using the Paravirtual SCSI controller for the hard disk 2(no matter if it is a VMDK or a RDM one), even though the drive it is detected. Behaviour is like this: - after the pat file is installed, first reboot occurs - machine starting up with Grub error 22 - replaced on the datastore synoboot-trantor-4.2-3211-v1.2.vmdk - installation starts again because "Configuration lost" Instead of that, installation works flawlessly to the end if the hard disk 2 is created using Virtual Device Node as IDE(0:1), but then IDE performance is pretty horrific. Used the same procedure for installation like in Idiot's Guide to DSM 4.2 and ESXi 5.1 Hmm, maybe totalnas have more info about what is needed. Else I can provide some requested info from the working version which I'm running currently. Thanks. Link to comment Share on other sites More sharing options...
Trantor Posted October 24, 2013 Author Share #36 Posted October 24, 2013 This is the first beta for build v1.2a - Add USB to serial FTDI and Prolific chips - Update igb driver for intel I340/I350 support - Update e1000e, r8168 network driver - Add ASIX AX88179 USB 3.0 Gigabit Ethernet driver - Add patched r8169 driver (removed r8168 support from it to prevent conflict) - Add firmware for r8169 (realtek) and tigon3 (broadcom) drivers - Built-in mp2sas and megaraid_sas drivers (instead of modules) - Add lot of virtualization options (hyper-v, vmware, virtio, xen, paravirtualization guest... vbox modules in the next beta) Link : Beta 1a available below As usual write img file to your usb stick andcopy modules files (*.ko) in /lib/modules/ Sorry I don't have enought time to repack a full build (pat + synoboot) neither to test it properly... I'm counting on you guys I hope adding firmware will finally fix the support of "strange" r8169 chip and broadcom BCM57788 chip Link to comment Share on other sites More sharing options...
echris Posted October 25, 2013 Share #37 Posted October 25, 2013 This is the first beta for build v1.2a - Add USB to serial FTDI and Prolific chips - Update igb driver for intel I340/I350 support - Update e1000e, r8168 network driver - Add ASIX AX88179 USB 3.0 Gigabit Ethernet driver - Add patched r8169 driver (removed r8168 support from it to prevent conflict) - Add firmware for r8169 (realtek) and tigon3 (broadcom) drivers - Built-in mp2sas and megaraid_sas drivers (instead of modules) - Add lot of virtualization options (hyper-v, vmware, virtio, xen, paravirtualization guest... vbox modules in the next beta) Link : http://xpenology.trantor.be/xpenology-trantor-v1.2a_beta1.7z As usual write img file to your usb stick andcopy modules files (*.ko) in /lib/modules/ Sorry I don't have enought time to repack a full build (pat + synoboot) neither to test it properly... I'm counting on you guys I hope adding firmware will finally fix the support of "strange" r8169 chip and broadcom BCM57788 chip Thank you very much. i try right now Edit : block at setup : attached scsi removable disk Link to comment Share on other sites More sharing options...
costib Posted October 25, 2013 Share #38 Posted October 25, 2013 Hi, I've tried it also with no luck. Same behavior as with the previous version, plus see point nr1. below. 1. When used the network adapter as VMXNET3, assistant couldn't find any server. Changed to E1000 and assistant detects it. 2. Configured the VM with hard disk 2 as SCSI(0:0), controller SCSI Paravirtual. Proceed with setup: - "Note: All data on the hard drive(s) 1 will be deleted." - it means that only 1 hard disk was detected(the boot one)? I know that when the hard disk 2 is configured as IDE(0:1) the message is "Note: All data on the hard drive(s) 1,2 will be deleted." - it means 2 hard disks detected(the boot one and the second one)? - Then setup progress stops immediately at "Initializing..." with "An error occurred during installation." Link to comment Share on other sites More sharing options...
Bartleby Posted October 26, 2013 Share #39 Posted October 26, 2013 Hi Trantor, Can you add this two drivers: Chipset: Intel NM10 (Formerly Tiger Point Network: Intel 82552V 10/100Mbit Ethernet You can find my board and this drivers here: http://www.jetwaycomputer.com/NC94.html thanks so much ! Link to comment Share on other sites More sharing options...
DancingQueen Posted October 26, 2013 Share #40 Posted October 26, 2013 Qualcomm Atheros AR8171 please... ^^ Link to comment Share on other sites More sharing options...
stephle Posted October 27, 2013 Share #41 Posted October 27, 2013 hi i need driver for dvb-t and dvb-s cards pci saa7134 for dvb-tmodel card ctx918 v2 and the dvb-s is hauppauge nexus wintv saa7146A if possible or if someone know how to build ko or kernel spec because i don't know thank's Link to comment Share on other sites More sharing options...
Trantor Posted October 27, 2013 Author Share #42 Posted October 27, 2013 @Bartleby : Your card is detected with the intel e100 driver which is built-in the kernel @stephle : DVB drivers will be added in the future @DancingQueen : Included in beta 1a Build v1.2a - beta 1a - Qualcomm Atheros AR816x/AR817x support (backported alx driver from kernel 3.10.4) - Include firmwares files forgotten in previous beta Need feedbacks for previously included drivers... PS : I take a look of the ESXi build by jukolaut (with PVSCSI support) and we must make a special version for ESXi as it need his dummy synobios kernel module, and some patched files to work properly. Link to comment Share on other sites More sharing options...
Rand__ Posted October 27, 2013 Share #43 Posted October 27, 2013 Hi, are the LSI sas drivers included in this latest beta? I still dont see my drives attached to an 1068e chip (IBM BR10i) - or only the 2008's supported atm? And i dont see anything that looks like a megaraid driver in the list;) Or did i do sth wrong? - I reuploaded the vmdk (to a running system) and copied all modules to the modules dir (cp -rf o/c)... Thx p.s. Found "Built-in mp2sas and megaraid_sas drivers (instead of modules)" in a changelog ... so thats why there are no modules; what LSI chips do these support? Link to comment Share on other sites More sharing options...
costib Posted October 27, 2013 Share #44 Posted October 27, 2013 .................... PS : I take a look of the ESXi build by jukolaut (with PVSCSI support) and we must make a special version for ESXi as it need his dummy synobios kernel module, and some patched files to work properly. That's some good news to hear! At least you've found that the cause for ESXi problem was not the missing drivers. Now I feel like a fly who tried to go out through the window glass . Thanks. Link to comment Share on other sites More sharing options...
Trantor Posted October 28, 2013 Author Share #45 Posted October 28, 2013 are the LSI sas drivers included in this latest beta? I still dont see my drives attached to an 1068e chip (IBM BR10i) - or only the 2008's supported atm? And i dont see anything that looks like a megaraid driver in the list;) Found "Built-in mp2sas and megaraid_sas drivers (instead of modules)" in a changelog ... so thats why there are no modules; what LSI chips do these support? No modules because there are built-in the kernel. SCSI drivers are the same as v1.2 + modifications included in the beta. (megaraid_newgen, megaraid_sas, mtp2sas are built-in). Your IBM BR10i controller is handle by the Fusion MPT Stack (not yet inclduded). I will add this in next beta. Fusion_SAS: LSISAS1064 LSISAS1068 LSISAS1064E LSISAS1068E LSISAS1078 Fusion_SPI: LSI53C1020 LSI53C1020A LSI53C1030 LSI53C1035 ATTO UL4D Link to comment Share on other sites More sharing options...
Rand__ Posted October 28, 2013 Share #46 Posted October 28, 2013 Great, looking forward to it:) Thx Link to comment Share on other sites More sharing options...
Trantor Posted October 29, 2013 Author Share #47 Posted October 29, 2013 I take a closer look at jukolaut's work. He provide the sources of his work, in particular sd.c and libata-scsi.c. I think with these modifications PVSCSI will work without special synobios module. I will repack this tonight Link to comment Share on other sites More sharing options...
costib Posted October 29, 2013 Share #48 Posted October 29, 2013 Great! Because I have the ESXi environment up and running, I can give feed back as soon as you have something available. Link to comment Share on other sites More sharing options...
survivor1127 Posted October 29, 2013 Share #49 Posted October 29, 2013 Dear Trantor I am new gay for XPEnology, I am trying to install of all posted ver. (4.1 ~ 4.2) But also not working... holding in following photo. and below is my hareware conifg. And i use Synology Assistant can search the PC. Is it the Hardware not support?~? -------------------------------------------------- CPU: DaulCore Intel Core 2 Duo E8400 Motherboard ID: 08/26/2009-MCP7A-7A61QG01C-00 Name: Gigabyte GA-E7AUM-DS2H Bus Type: Intel AGTL+ Noth Bridge: nVIDIA GeForce9400(MCP7A-U) South Bridge: nVIDIA GeForce9400(MCP7A-U) Network (onboard) : NVIDIA nForce Ethernet ------------------------------------------------------ Best Regards Survivor Link to comment Share on other sites More sharing options...
costib Posted October 29, 2013 Share #50 Posted October 29, 2013 @ Trantor: I hope it's not to late for this evening repack, but can you also include this power off fix? Thanks to darkest_star Thanks. Edit: I've tested it but, seems like installation of "VMware Tools" are a must have, for "Shut Down Guest" to work inside ESXi. Link to comment Share on other sites More sharing options...
Recommended Posts