Rick4 Posted August 5, 2023 Share #26 Posted August 5, 2023 (edited) On 12/14/2022 at 5:08 AM, Peter Suh said: When TCRP FREIND was first released, I tested it with my RYZEN system in a test with pocopico, and there were parts that showed instability. So, the method I suggest is to use the JOT MODE loader build right under the TCRP FRIEND MODE loader build menu, as narvell3 used above. And, ryzen 7 1700 is a 16-thread CPU, and DS918+, DS920+, and DVA3221, which only support up to 8 cores, do not work when HT is turned on. Hello! Help me please! What means JOT mode? Just bought a topton n1 pro mini nas from bangood, with a very powerful ryzen5-5500U 6c/12t CPU, 16GB DDR4 memory, double i226 LAN, double nvme ssd, double sata HDD port, but unfortunately after is compile loader, there's no boot, looks like everíthing works, but syno assistant, advanced ip scanner, web browser don't find server, so looks like same as narvell3 story. Before boot, i can set everything in bios, compile loader (ARLP, ARC, ARLP i18n, Redpill, TCRP, etc etc, after reboot, loader can't work. Tried many more media, sata SSD, TF card, usb pendrive, same result. Tried omv, rockstor, istoreOS, truenas, freenas, win11, everything's works fine, only xpenology blocked. Tried many more bios settings, from default to last line disabling, then i get only one lan card, tried an usb2 lan r8152 adapter, same result.. I have 10+ years good skill installing xpenology, building and using home lan, servers, PCs, etc etc. What can i do? Thanks in advance! Edited August 5, 2023 by Rick4 Quote Link to comment Share on other sites More sharing options...
Rick4 Posted August 5, 2023 Share #27 Posted August 5, 2023 1 hour ago, Rick4 said: Hello! Help me please! What means JOT mode? Just bought a topton n1 pro mini nas from bangood, with a very powerful ryzen5-5500U 6c/12t CPU, 16GB DDR4 memory, double i226 LAN, double nvme ssd, double sata HDD port, but unfortunately after is compile loader, there's no boot, looks like everíthing works, but syno assistant, advanced ip scanner, web browser don't find server, so looks like same as narvell3 story. Before boot, i can set everything in bios, compile loader (ARLP, ARC, ARLP i18n, Redpill, TCRP, etc etc, after reboot, loader can't work. Tried many more media, sata SSD, TF card, usb pendrive, same result. Tried omv, rockstor, istoreOS, truenas, freenas, win11, everything's works fine, only xpenology blocked. Tried many more bios settings, from default to last line disabling, then i get only one lan card, tried an usb2 lan r8152 adapter, same result.. I have 10+ years good skill installing xpenology, building and using home lan, servers, PCs, etc etc. What can i do? Thanks in advance! So finally found JOT MODE, but in my case don't help! Still nothing happens after compile and booted loader looks alike good. I can compile if i push into usb2lan adapter, and get network, all ok, but after compile can't find on lan. Quote Link to comment Share on other sites More sharing options...
Rick4 Posted August 5, 2023 Share #28 Posted August 5, 2023 (edited) 1 hour ago, Rick4 said: So finally found JOT MODE, but in my case don't help! Still nothing happens after compile and booted loader looks alike good. I can compile if i push into usb2lan adapter, and get network, all ok, but after compile can't find on lan. Looks like, there's no i226V driver, reboot and push r8152 usb2lan adapter, (lan cable plug into) and then loader get ip, but after compile and reboot, then looks like there's no internet again. Not visible on lan. Edited August 5, 2023 by Rick4 Quote Link to comment Share on other sites More sharing options...
Rick4 Posted August 20, 2023 Share #29 Posted August 20, 2023 On 8/5/2023 at 7:01 PM, Rick4 said: Looks like, there's no i226V driver, reboot and push r8152 usb2lan adapter, (lan cable plug into) and then loader get ip, but after compile and reboot, then looks like there's no internet again. Not visible on lan. All ok after disabled amd uart config in BIOS! 1 Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted August 20, 2023 Share #30 Posted August 20, 2023 4 hours ago, Rick4 said: All ok after disabled amd uart config in BIOS! I know that uart is a standard used for serial communication, but I didn't know that it might be an obstacle to booting the loader. Quote Link to comment Share on other sites More sharing options...
Rick4 Posted August 21, 2023 Share #31 Posted August 21, 2023 3 hours ago, Peter Suh said: I know that uart is a standard used for serial communication, but I didn't know that it might be an obstacle to booting the loader. Until that time never met any UART settings. It's a Topton N1 pro nas, with very very strange ang unknown bios settings. That uart enabled by default. Quote Link to comment Share on other sites More sharing options...
Jastden Posted February 13 Share #32 Posted February 13 (edited) Hello @Peter Suh. I think i have the exact same problem as @narvell3 and @Plesjoor. Specs: ASUS PRIME X370-A, AMD Ryzen 7 2700, NIC: R8168, gpu Radeon x550 512mb (temporary plug), m.2 ssd nvme 256 gb, 2xHDD sata. Before boot, i can set everything in bios, compile loader (ARLP, ARC, ARLP i18n, Redpill, TCRP, etc etc, after reboot, loader can't work. I have already rebooted 1272 times, everything is not working yet Цитата When TCRP FREIND was first released, I tested it with my RYZEN system in a test with pocopico, and there were parts that showed instability. So, the method I suggest is to use the JOT MODE loader build right under the TCRP FRIEND MODE loader build menu, as narvell3 used above. And, ryzen 7 1700 is a 16-thread CPU, and DS918+, DS920+, and DVA3221, which only support up to 8 cores, do not work when HT is turned on Please tell me if it is possible to run xpenology on this hardware without proxmox, since I need maximum performance, and if possible, the question is whether a virtual machine with home assistant and others will work on it, I just read that virtualization does not work on amd. I would be very grateful if you could tell me in detail which version to choose in the loader for maximum performance (DS3622xs+ ???) and which version of synology (7.2 ??) and if there are any more nuances, please tell me in detail what to choose because I'm confused I tried the JOT mode, it causes a kernel panic I tried Direct Boot mode in aprl, it freezes I have been studying and experimenting for 3 days now, but to no avail. I will be very grateful for any help, THANK you in advance!!! Edited February 13 by Jastden Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted February 13 Share #33 Posted February 13 1 hour ago, Jastden said: Hello @Peter Suh. I think i have the exact same problem as @narvell3 and @Plesjoor. Specs: ASUS PRIME X370-A, AMD Ryzen 7 2700, NIC: R8168, gpu Radeon x550 512mb (temporary plug), m.2 ssd nvme 256 gb, 2xHDD sata. Before boot, i can set everything in bios, compile loader (ARLP, ARC, ARLP i18n, Redpill, TCRP, etc etc, after reboot, loader can't work. I have already rebooted 1272 times, everything is not working yet Please tell me if it is possible to run xpenology on this hardware without proxmox, since I need maximum performance, and if possible, the question is whether a virtual machine with home assistant and others will work on it, I just read that virtualization does not work on amd. I would be very grateful if you could tell me in detail which version to choose in the loader for maximum performance (DS3622xs+ ???) and which version of synology (7.2 ??) and if there are any more nuances, please tell me in detail what to choose because I'm confused I tried the JOT mode, it causes a kernel panic I tried Direct Boot mode in aprl, it freezes I have been studying and experimenting for 3 days now, but to no avail. I will be very grateful for any help, THANK you in advance!!! Your capture seems to show the grub boot menu at a stage where the loader has not been built yet. Is it correct that you built the loader after that? Would you like to try SA6400? I will check for possible CPU thread support separately. SA6400 is based on the same AMD as the Eypc7002 platform. Quote Link to comment Share on other sites More sharing options...
Jastden Posted February 13 Share #34 Posted February 13 12 минут назад, Peter Suh сказал: Your capture seems to show the grub boot menu at a stage where the loader has not been built yet. Is it correct that you built the loader after that? Would you like to try SA6400? I will check for possible CPU thread support separately. SA6400 is based on the same AMD as the Eypc7002 platform. I do the following steps, as a result it freezes during loading, I waited about 15 minutes. Today I managed to run on ds923+ (JOT), it showed the recovery page, I clicked restore from old xpenology (before changing the hardware I had ds920+), as a result I waited 10 minutes and without result, it froze. Maybe it's worth clearing m.2 ? Quote Link to comment Share on other sites More sharing options...
Jastden Posted February 13 Share #35 Posted February 13 3 часа назад, Peter Suh сказал: Your capture seems to show the grub boot menu at a stage where the loader has not been built yet. Is it correct that you built the loader after that? Would you like to try SA6400? I will check for possible CPU thread support separately. SA6400 is based on the same AMD as the Eypc7002 platform. I cleared the m.2 drive, now it freezes on this label: Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted February 13 Share #36 Posted February 13 3 hours ago, Jastden said: I cleared the m.2 drive, now it freezes on this label: Are there any other Intel-based NICs other than the dual r8169 built-in NIC? Also, have you checked to see if the router is assigned an IP other than 10.10.10.101? Quote Link to comment Share on other sites More sharing options...
Savert1 Posted March 29 Share #37 Posted March 29 It freezes in Booting, I have a Rayzen 5 8500G with 32Gb of RAM and an asus rog strix b650e-f motherboard, I don't know what to do Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.