Peter Suh Posted July 19, 2022 Share #226 Posted July 19, 2022 (edited) 34 minutes ago, giacomoleopardo said: I'm not sure of what I'm looking at: gio_admin@NAS920J:/$ ll /sys/block total 0 drwxr-xr-x 2 root root 0 Jul 19 16:02 . dr-xr-xr-x 12 root root 0 Jul 19 16:02 .. lrwxrwxrwx 1 root root 0 Jul 19 16:02 dm-0 -> ../devices/virtual/block/dm-0 lrwxrwxrwx 1 root root 0 Jul 19 16:02 dm-1 -> ../devices/virtual/block/dm-1 lrwxrwxrwx 1 root root 0 Jul 19 16:02 dm-2 -> ../devices/virtual/block/dm-2 lrwxrwxrwx 1 root root 0 Jul 19 16:02 loop0 -> ../devices/virtual/block/loop0 lrwxrwxrwx 1 root root 0 Jul 19 16:02 loop1 -> ../devices/virtual/block/loop1 lrwxrwxrwx 1 root root 0 Jul 19 16:02 loop2 -> ../devices/virtual/block/loop2 lrwxrwxrwx 1 root root 0 Jul 19 16:02 loop3 -> ../devices/virtual/block/loop3 lrwxrwxrwx 1 root root 0 Jul 19 16:02 loop4 -> ../devices/virtual/block/loop4 lrwxrwxrwx 1 root root 0 Jul 19 16:02 loop5 -> ../devices/virtual/block/loop5 lrwxrwxrwx 1 root root 0 Jul 19 16:02 loop6 -> ../devices/virtual/block/loop6 lrwxrwxrwx 1 root root 0 Jul 19 16:02 loop7 -> ../devices/virtual/block/loop7 lrwxrwxrwx 1 root root 0 Jul 19 16:02 md0 -> ../devices/virtual/block/md0 lrwxrwxrwx 1 root root 0 Jul 19 16:02 md1 -> ../devices/virtual/block/md1 lrwxrwxrwx 1 root root 0 Jul 19 16:02 md2 -> ../devices/virtual/block/md2 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram0 -> ../devices/virtual/block/ram0 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram1 -> ../devices/virtual/block/ram1 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram10 -> ../devices/virtual/block/ram10 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram11 -> ../devices/virtual/block/ram11 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram12 -> ../devices/virtual/block/ram12 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram13 -> ../devices/virtual/block/ram13 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram14 -> ../devices/virtual/block/ram14 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram15 -> ../devices/virtual/block/ram15 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram2 -> ../devices/virtual/block/ram2 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram3 -> ../devices/virtual/block/ram3 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram4 -> ../devices/virtual/block/ram4 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram5 -> ../devices/virtual/block/ram5 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram6 -> ../devices/virtual/block/ram6 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram7 -> ../devices/virtual/block/ram7 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram8 -> ../devices/virtual/block/ram8 lrwxrwxrwx 1 root root 0 Jul 19 16:02 ram9 -> ../devices/virtual/block/ram9 lrwxrwxrwx 1 root root 0 Jul 19 16:02 sata1 -> ../devices/pci0000:00/0000:00:17.0/ata5/host4/target4:0:0/4:0:0:0/block/sata1 lrwxrwxrwx 1 root root 0 Jul 19 16:02 sata2 -> ../devices/pci0000:00/0000:00:17.0/ata6/host5/target5:0:0/5:0:0:0/block/sata2 lrwxrwxrwx 1 root root 0 Jul 19 16:02 synoboot -> ../devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/host10/target10:0:0/10:0:0:0/block/synoboot lrwxrwxrwx 1 root root 0 Jul 19 16:02 zram0 -> ../devices/virtual/block/zram0 lrwxrwxrwx 1 root root 0 Jul 19 16:02 zram1 -> ../devices/virtual/block/zram1 PS: Dumb question: What does "DTC" stand for? It's a bit difficult to explain simply. https://source.android.com/devices/architecture/dto https://octavosystems.com/app_notes/osd335x-design-tutorial/osd335x-lesson-2-minimal-linux-boot/linux-device-tree/ In REDPILL If you know what dtc / dts / dtb is, you can use it. Edited July 19, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
giacomoleopardo Posted July 20, 2022 Share #227 Posted July 20, 2022 13 hours ago, Peter Suh said: In REDPILL If you know what dtc / dts / dtb is, you can use it. How? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 20, 2022 Share #228 Posted July 20, 2022 4 hours ago, giacomoleopardo said: How? Most of these three files have been improved recently so that they are processed automatically without using them directly. When there is a special reason to use it, it is not too late to learn it. Quote Link to comment Share on other sites More sharing options...
giacomoleopardo Posted July 20, 2022 Share #229 Posted July 20, 2022 1 hour ago, Peter Suh said: Most of these three files have been improved recently so that they are processed automatically without using them directly. When there is a special reason to use it, it is not too late to learn it. I agree. Is ./my.sh DS920+J one of these automation you are talking about? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 20, 2022 Share #230 Posted July 20, 2022 18 minutes ago, giacomoleopardo said: I agree. Is ./my.sh DS920+J one of these automation you are talking about? yes, automation It is already being done in this shell script. J is the jun mode. jun mode is another solution related to DSM automatic update. Quote Link to comment Share on other sites More sharing options...
giacomoleopardo Posted July 22, 2022 Share #231 Posted July 22, 2022 (edited) Now, this is amazing: with the extraordinary help of ./my.sh DS920+ I've just applied the jumkey's jun's mod through ./my.sh DS920+J noconfig with manual serial, vid and pid. The dtc is making its job flawlessly due to DS920+, and I tested the Synology update from 7.0.1 (Update5) to 7.1.0 (Update 3) with success! @jumkey Would it be possible for you to implement in your jun's mod some more extensions such as: add acpid service (power button) sudo ./rploader.sh ext geminilake-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/develop/redpill-acpid/rpext-index.json Realtek 2,5 Gb 8125 NIC controller ext sudo ./rploader.sh ext geminilake-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/main/r8125/rpext-index.json Also thanks to @Peter Suh for clarifying all these concepts for me! Edited July 22, 2022 by giacomoleopardo Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 23, 2022 Share #232 Posted July 23, 2022 13 hours ago, giacomoleopardo said: Now, this is amazing: with the extraordinary help of ./my.sh DS920+ I've just applied the jumkey's jun's mod through ./my.sh DS920+J noconfig with manual serial, vid and pid. The dtc is making its job flawlessly due to DS920+, and I tested the Synology update from 7.0.1 (Update5) to 7.1.0 (Update 3) with success! @jumkey Would it be possible for you to implement in your jun's mod some more extensions such as: add acpid service (power button) sudo ./rploader.sh ext geminilake-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/develop/redpill-acpid/rpext-index.json Realtek 2,5 Gb 8125 NIC controller ext sudo ./rploader.sh ext geminilake-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/main/r8125/rpext-index.json Also thanks to @Peter Suh for clarifying all these concepts for me! instead of ./my.sh DS920+J noconfig Use ./myv.sh DS920+J noconfig There is a function that allows you to add the exts you want in advance. You can select several at the same time. Quote Link to comment Share on other sites More sharing options...
giacomoleopardo Posted July 23, 2022 Share #233 Posted July 23, 2022 8 hours ago, Peter Suh said: instead of ./my.sh DS920+J noconfig Use ./myv.sh DS920+J noconfig There is a function that allows you to add the exts you want in advance. You can select several at the same time. Very nice! What I need is 22 for onboard Intel 1Gb NIC and 46 for my Realtek 2,5 Gb pci-e NIC. Which one is for acpid service? 1) aacraid 2) aic94xx 3) alx 4) arcmsr 5) asix 6) atl1 7) atl1c 😎 atl1e 9) atl2 10) atlantic 11) ax88179_178a 12) be2net 13) bna 14) bnx2 15) bnx2x 16) cxgb 17) cxgb3 18) cxgb4 19) cxgb4vf 20) dm9601 21) e1000 22) e1000e 23) early-telnet 24) forcedeth 25) hpsa 26) hv_netvsc 27) i40e 28) iavf 29) igb 30) igbvf 31) ixgbe 32) ixgbe.vanilla 33) ixgbevf 34) megaraid_sas 35) mlx4_core 36) mlx5_core 37) mpt2sas 38) mpt3sas 39) mptsas 40) mptspi 41) mvsas 42) nct6775 43) qla2xxx 44) qlcnic 45) r8101 46) r8125 47) r8152 48) r8168 49) r8169 50) raspbi-pill 51) redpill 52) redpill-boot-wait 53) rtl8150 54) sfc 55) skge 56) sky2 57) tcrp-diag 58) tg3 59) tn40xx 60) v9fs 61) via-rhine 62) via-velocity 63) vmw_pvscsi 64) vmxnet3 65) vxge 66) wch Quote Link to comment Share on other sites More sharing options...
giacomoleopardo Posted July 23, 2022 Share #234 Posted July 23, 2022 9 hours ago, Peter Suh said: instead of ./my.sh DS920+J noconfig Use ./myv.sh DS920+J noconfig There is a function that allows you to add the exts you want in advance. You can select several at the same time. r8125 gives errors: [-] The extension pocopico.r8125 was found. However, the extension index has no recipe for ds920p_42218 platform. It may not be [-] supported on that platform, or author didn't updated it for that platform yet. You can try running [-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about [-] the extension stored locally: [#] ========================================== pocopico.r8125 ========================================== [#] Extension name: r8125 [#] Description: Adds Realtek RTL8125 2.5Gigabit Ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/r8125 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 dva1622_42621 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42621 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= [-] Failed to update recipe for pocopico.r8125 extension for platform ds920p_42218. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) [#] ========================================== pocopico.r8125 ========================================== [#] Extension name: r8125 [#] Description: Adds Realtek RTL8125 2.5Gigabit Ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/r8125 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 dva1622_42621 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42621 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= [!] Cannot continue due to previous errors (see above) *** Process will exit *** [!] Failed to update all extensions for ds920p_42218 platform - see errors above *** Process will exit *** FAILED : Loader creation failed check the output for any errors Any idea? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 23, 2022 Share #235 Posted July 23, 2022 (edited) 2 hours ago, giacomoleopardo said: Very nice! What I need is 22 for onboard Intel 1Gb NIC and 46 for my Realtek 2,5 Gb pci-e NIC. Which one is for acpid service? 1) aacraid 2) aic94xx 3) alx 4) arcmsr 5) asix 6) atl1 7) atl1c 😎 atl1e 9) atl2 10) atlantic 11) ax88179_178a 12) be2net 13) bna 14) bnx2 15) bnx2x 16) cxgb 17) cxgb3 18) cxgb4 19) cxgb4vf 20) dm9601 21) e1000 22) e1000e 23) early-telnet 24) forcedeth 25) hpsa 26) hv_netvsc 27) i40e 28) iavf 29) igb 30) igbvf 31) ixgbe 32) ixgbe.vanilla 33) ixgbevf 34) megaraid_sas 35) mlx4_core 36) mlx5_core 37) mpt2sas 38) mpt3sas 39) mptsas 40) mptspi 41) mvsas 42) nct6775 43) qla2xxx 44) qlcnic 45) r8101 46) r8125 47) r8152 48) r8168 49) r8169 50) raspbi-pill 51) redpill 52) redpill-boot-wait 53) rtl8150 54) sfc 55) skge 56) sky2 57) tcrp-diag 58) tg3 59) tn40xx 60) v9fs 61) via-rhine 62) via-velocity 63) vmw_pvscsi 64) vmxnet3 65) vxge 66) wch The missing redpill-acpid was modified to be used as number 52. Try it again. You can type like this. 46,52 Edited July 23, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 23, 2022 Share #236 Posted July 23, 2022 (edited) 2 hours ago, giacomoleopardo said: r8125 gives errors: [-] The extension pocopico.r8125 was found. However, the extension index has no recipe for ds920p_42218 platform. It may not be [-] supported on that platform, or author didn't updated it for that platform yet. You can try running [-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about [-] the extension stored locally: [#] ========================================== pocopico.r8125 ========================================== [#] Extension name: r8125 [#] Description: Adds Realtek RTL8125 2.5Gigabit Ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/r8125 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 dva1622_42621 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42621 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= [-] Failed to update recipe for pocopico.r8125 extension for platform ds920p_42218. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) [#] ========================================== pocopico.r8125 ========================================== [#] Extension name: r8125 [#] Description: Adds Realtek RTL8125 2.5Gigabit Ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/r8125 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 dva1622_42621 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 ds2422p_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42621 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= [!] Cannot continue due to previous errors (see above) *** Process will exit *** [!] Failed to update all extensions for ds920p_42218 platform - see errors above *** Process will exit *** FAILED : Loader creation failed check the output for any errors Any idea? @pocopico was applied 1 hour before. https://github.com/pocopico/rp-ext/commit/fa48e5f2f8eea86d35881a1b52fe1b03e5a275c0 I have synced now. https://github.com/PeterSuh-Q3/rp-ext/commit/9bd2b7affe88540bb3a4abbfbce3ef05e7d7f774 Edited July 23, 2022 by Peter Suh Quote Link to comment Share on other sites More sharing options...
giacomoleopardo Posted July 23, 2022 Share #237 Posted July 23, 2022 44 minutes ago, Peter Suh said: The missing redpill-acpid was modified to be used as number 52. Try it again. You can type like this. 46,52 Is this still the right link do use your script? wget https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/myv.sh.gz; tar -zxvf myv.sh.gz; Because it's still giving me 52) redpill-boot-wait Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 23, 2022 Share #238 Posted July 23, 2022 1 minute ago, giacomoleopardo said: Is this still the right link do use your script? wget https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/myv.sh.gz; tar -zxvf myv.sh.gz; Because it's still giving me 52) redpill-boot-wait It's an old download script. Use the one below. myv.sh is also included. curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz" -O; tar -zxvf my.sh.gz; Quote Link to comment Share on other sites More sharing options...
giacomoleopardo Posted July 23, 2022 Share #239 Posted July 23, 2022 10 minutes ago, Peter Suh said: It's an old download script. Use the one below. myv.sh is also included. curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz" -O; tar -zxvf my.sh.gz; Alright, this link works, but another error on r8125 [-] JSON file "/home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json" is invalid: parse error: Expected separator between values at line 40, column 18 [-] Extension loaded from https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/r8125/rpext-index.json (id: ) is invalid: index JSON file is unparsable. Please report that to the extension maintainer via help URL [!] The index file for https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/r8125/rpext-index.json extension is invalid - please report that to the extension maintainer *** Process will exit *** Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 23, 2022 Share #240 Posted July 23, 2022 29 minutes ago, giacomoleopardo said: Alright, this link works, but another error on r8125 [-] JSON file "/home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json" is invalid: parse error: Expected separator between values at line 40, column 18 [-] Extension loaded from https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/r8125/rpext-index.json (id: ) is invalid: index JSON file is unparsable. Please report that to the extension maintainer via help URL [!] The index file for https://raw.githubusercontent.com/PeterSuh-Q3/rp-ext/master/r8125/rpext-index.json extension is invalid - please report that to the extension maintainer *** Process will exit *** Sorry, There was a typo. Try again now. 1 1 Quote Link to comment Share on other sites More sharing options...
giacomoleopardo Posted July 23, 2022 Share #241 Posted July 23, 2022 (edited) Exciting as always! Thanks to @pocopico @jumkey and @Peter Suh I had successfully installed DSM 7.0.1 (update 5) and next I successfully updated to DSM 7.1.0 (Update 3) through DSM update. I also installed extensions for my Realtek 2,5 Gb 8125 NIC controller and added acpid service (power button), everything survived happily to the update from 7.0.1 to 7.1.0. Here are the steps: [DS920+] - MANUALLY MODIFY user_config.json with serial n. and Mac addresses (included my Realtek 2,5 Gb NIC) through WinSCP - from Putty: sudo ./rploader.sh identifyusb now # to get USB pen drive vid and pid curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz" -O; tar -zxvf my.sh.gz; # to download Peter Suh's amazing script my.sh ./myv.sh DS920+J noconfig # why myv? Because it gives us the opportunity to install other extensions (such as 46 and 52); why J? Because this is jumkey's latest Jun's Mod which allows updating like a real Synology (at least from 7.0.1 to 7.1); why noconfig? Because I manually modified the serial n. and the mac addresses with proper ones Attached here my Putty session, just in case somebody would need it. Putty session 23rd July 2022.txt Edited July 23, 2022 by giacomoleopardo 2 Quote Link to comment Share on other sites More sharing options...
maqros Posted July 24, 2022 Share #242 Posted July 24, 2022 (edited) hi all. thanks for making installing dsm so easy. I did not find drivers for AQC111U 5Gb usb network adapters in the extensions. I am currently using the package from here https://github.com/bb-qq/aqc111. is it possible to add it? Edited July 24, 2022 by maqros 1 Quote Link to comment Share on other sites More sharing options...
giacomoleopardo Posted July 26, 2022 Share #243 Posted July 26, 2022 @Peter Suh Do you know how to map nvme on DS920+ ? 1 Quote Link to comment Share on other sites More sharing options...
Hackaro Posted July 26, 2022 Share #244 Posted July 26, 2022 30 minutes ago, giacomoleopardo said: @Peter Suh Do you know how to map nvme on DS920+ ? YES!!!! this is quite interesting!!! I know that my 918+ has NVMe hardcoded in libnvme.sys but which other models have the same charateristics so that they are patchable with an hex editor? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 26, 2022 Share #245 Posted July 26, 2022 The ds920+ used ARPL's fabio's dtbpatch ext. This dtbpatch ext is designed to automatically detect and add NVMe. If this part is not automatically processed, there must be another reason. Quote Link to comment Share on other sites More sharing options...
giacomoleopardo Posted July 26, 2022 Share #246 Posted July 26, 2022 3 minutes ago, Peter Suh said: The ds920+ used ARPL's fabio's dtbpatch ext. This dtbpatch ext is designed to automatically detect and add NVMe. If this part is not automatically processed, there must be another reason. Whit this procedure I used should dtbpatch be automatically present, or do I need to add it manually during usb boot drive creation? Quote Link to comment Share on other sites More sharing options...
Peter Suh Posted July 26, 2022 Share #247 Posted July 26, 2022 (edited) 1 hour ago, giacomoleopardo said: Whit this procedure I used should dtbpatch be automatically present, or do I need to add it manually during usb boot drive creation? dtbpatch is already added automatically by m shell(my.sh) . Since it is a topic completely unrelated to jun mode, it is not polite to jumkey to continue talking on this topic. If you create a new topic in the general question box, I will continue to answer it. Edited July 26, 2022 by Peter Suh 2 Quote Link to comment Share on other sites More sharing options...
giacomoleopardo Posted July 26, 2022 Share #248 Posted July 26, 2022 6 minutes ago, Peter Suh said: dtbpatch is already added automatically by m shell(my.sh) . Since it is a topic completely unrelated to jun mode, it is not polite to jumkey to continue talking on this topic. If you create a new topic in the general question box, I will continue to answer it. Fair enough. In a few days I'll test an nvme cache implementation. Thanks 2 Quote Link to comment Share on other sites More sharing options...
Hackaro Posted July 26, 2022 Share #249 Posted July 26, 2022 1 hour ago, giacomoleopardo said: Fair enough. In a few days I'll test an nvme cache implementation. Thanks I guess the best thread to continue this discussion about NVMe already exists and it's this one: NVME-CACHE-SUPPORT, I'll write my observations there and I invite you and @Peter Suh to do the same. Quote Link to comment Share on other sites More sharing options...
miicker Posted August 2, 2022 Share #250 Posted August 2, 2022 I am now running Tinycore Redpill with DSM version 7.1-42661 Update 1. Is there somewhere a clear and simple tutorial on how to migrate to this Jun's mod? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.