maqros

Hi guys. Is there any way to roll back or recover, if I trapped into this)? I've got DS920+ with M.2 NVMe cache

Thanks alot. /usr/syno/bin/synosetkeyvalue /etc.defaults/synoinfo.conf support_m2_pool yes this helped me. Now I see my RAID device healthy and all the data came back.

\ I've applied ds920+. in previously installed DSM I used manually created storage pool on this device, and there was any issue with this.

Hi guys. after upgrading to DSM 7.2 i've lost support for my m2 nvme device. Could somebody help to troubleshut this issue? I now use @Peter Suh image from Github

https://github.com/PeterSuh-Q3/tinycore-redpill/releases/tag/v0.9.4.3-2

Can confirm. 7.2RC installs with no issues, thanks alot. what about 7.1?

Hi guys. Trying to install SA6400 on proxmox with tinycore-redpill.v0.9.4.3-2.m-shell.img, but getting corruption message at 55%. Have I missed something?

hi all. thanks for making installing dsm so easy. I did not find drivers for AQC111U 5Gb usb network adapters in the extensions. I am currently using the package from here https://github.com/bb-qq/aqc111. is it possible to add it?

for patching the libs I used this tutorial. everything works flawlessly

it's possible to create a volume on nvme and use for smth. here is HOWTO

yep, you're right, but according to this post "USB devices are also SCSI-based (like SATA):" and need to be counted

this is what i do, thanks

unfortunately "something went wrong" errors on disks 1,2,4 sata ports were disabled(

just tried with the same result (no disk detected)

hi guys. my intel NUC8i3BEH runs DSM 6.2.3u3 with Jun 1.04b loader just fine. some output is here: when I try to install\update to redpill with loader built from Jumkey's repo (./build-loader.sh 'DS918+' '7.0.1-42218') with no sata_args defined, in web assistant I got message error on disks 1,2 and sata port disabled. after reading the articles linked above and adding these strings "DiskIdxMap": "0C", "SataPortMap": "1", "SasIdxMap": "0" (and a few other variants) in user_config.json got no disks were found. but when I install DSM on other box (MSI CUBI) and then attach this SSD to NUC, it works. Point me pls. which numbers in sata_args I should set.

thanks. replaced /usr/lib/modules/i915.ko with this one, unfortunately hangs on reboot with no even DHCP lease(. ready to go further

не буду утверждать обратное, но у меня SS 8.2.8 с одной камерой пишущей по движению на ssd выглядит так: при этом 8.2.7 с ~20 камерами на HDD уже иначе

hi guys. my question is to IG-88. First of all thanks a lot for your great job. Is there any chance to get support for mobile 10th gen video core i3- 10110U (8086:9B41)?

через ddns заходит

after enabling thunderbolt support in uefi and changing port everything is ok now.

hi guys. got this one lsusb output: |__usb1 1d6b:0002:0404 09 2.00 480MBit/s 0mA 1IF (Linux 4.4.59+ xhci-hcd xHCI Host Controller 0000:00:14.0) hub |__1-2 046d:c517:3810 00 1.10 1.5MBit/s 98mA 2IFs (Logitech USB Receiver ffffffc6ffffffa3ffffffd5ffffffbc) |__1-10 8087:0026:0002 e0 2.01 12MBit/s 100mA 2IFs ( ffffffd1ffffffb2ffffffdbffffffad) |__usb2 1d6b:0003:0404 09 3.00 5000MBit/s 0mA 1IF (Linux 4.4.59+ xhci-hcd xHCI Host Controller 0000:00:14.0) hub |__2-1 8564:1000:0a00 00 3.00 5000MBit/s 504mA 1IF (JetFlash Mass Storage Device 09021000000000000726862170) |__2-4 2eca:c101:0101 00 3.20 5000MBit/s 896mA 1IF (Aquantia Aquantia 5G USB Ethernet Adapter 000000BP) this is what i see in dmesg: [ 4.722654] aqc111 2-4:1.0 eth1: register 'aqc111' at usb-0000:00:14.0-4, Aquantia AQtion USB to 5GbE Controller, 00:0a:cd:38:eb:15 [ 4.738082] 2021-10-14 14:58:28 UTC [ 4.738082] synobios: load, major number 201 [ 4.738102] Brand: Synology [ 4.738102] Model: DS-918+ [ 4.738103] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 4.738103] synobios cpu_arch proc entry initialized [ 4.738103] synobios crypto_hw proc entry initialized [ 4.738104] synobios syno_platform proc entry initialized [ 4.738105] synobios open /dev/ttyS1 success [ 5.291213] xhci_hcd 0000:00:14.0: device is plugged out, empty URBs [ 5.312692] usb 2-4: USB disconnect, device number 3 [ 5.312701] aqc111 2-4:1.0 eth1: unregister 'aqc111' usb-0000:00:14.0-4, Aquantia AQtion USB to 5GbE Controller [ 6.506037] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0006: -110 [ 6.506041] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0001: -19 [ 6.506043] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0001: -19 [ 6.506044] aqc111 2-4:1.0 eth1: Failed to read(0x1) reg index 0x0001: -19 [ 6.506044] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0001: -19 [ 6.506050] aqc111 2-4:1.0 eth1: Failed to write(0x64) reg index 0x0000: -19 [ 6.506050] aqc111 2-4:1.0 eth1: Failed to write(0x61) reg index 0x0000: -19 [ 6.506077] aqc111 2-4:1.0 eth1: Failed to write(0x61) reg index 0x0000: -19 [ 6.506077] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0006: -19 [ 6.506077] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0001: -19 [ 6.506078] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0001: -19 [ 6.506078] aqc111 2-4:1.0 eth1: Failed to read(0x1) reg index 0x0001: -19 [ 6.506078] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0001: -19 [ 6.506079] aqc111 2-4:1.0 eth1: Failed to write(0x64) reg index 0x0000: -19 [ 6.506079] aqc111 2-4:1.0 eth1: Failed to write(0x61) reg index 0x0000: -19 [ 6.506080] aqc111 2-4:1.0 eth1: Error submitting the control message: status=-19 [ 6.506351] aqc111 2-4:1.0 eth1: Error submitting the control message: status=-19 [ 6.506605] aqc111 2-4:1.0 eth1: Error submitting the control message: status=-19 [ 6.506893] aqc111 2-4:1.0 eth1: Error submitting the control message: status=-19 [ 6.507132] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 6.507165] aqc111 2-4:1.0 eth1: Failed to read(0x1) reg index 0x0002: -19 [ 6.507165] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0002: -19 [ 6.507166] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0002: -19 [ 6.507166] aqc111 2-4:1.0 eth1: Failed to write(0x61) reg index 0x0000: -19 [ 6.519118] aqc111 2-4:1.0 eth1 (unregistered): Failed to write(0x1) reg index 0x0002: -19 [ 6.519119] aqc111 2-4:1.0 eth1 (unregistered): Failed to write(0x1) reg index 0x0002: -19 [ 6.519119] aqc111 2-4:1.0 eth1 (unregistered): Failed to write(0x61) reg index 0x0000: -19 [ 6.645776] usb 2-4: new SuperSpeed USB device number 4 using xhci_hcd [ 6.652492] aqc111 2-4:1.0 eth1: register 'aqc111' at usb-0000:00:14.0-4, Aquantia AQtion USB to 5GbE Controller, 00:0a:cd:38:eb:15 [ 6.798694] usb 2-4: USB disconnect, device number 4 [ 6.798705] aqc111 2-4:1.0 eth1: unregister 'aqc111' usb-0000:00:14.0-4, Aquantia AQtion USB to 5GbE Controller [ 6.924577] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 7.898409] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0006: -110 [ 7.898410] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0001: -19 [ 7.898410] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0001: -19 [ 7.898411] aqc111 2-4:1.0 eth1: Failed to read(0x1) reg index 0x0001: -19 [ 7.898411] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0001: -19 [ 7.898411] aqc111 2-4:1.0 eth1: Failed to write(0x64) reg index 0x0000: -19 [ 7.898412] aqc111 2-4:1.0 eth1: Failed to write(0x61) reg index 0x0000: -19 [ 7.925803] BTRFS: device label 2021.10.14-14:48:47 v25426 devid 1 transid 31 /dev/md2 [ 7.925933] BTRFS info (device md2): enabling auto syno reclaim space [ 7.925934] BTRFS info (device md2): use ssd allocation scheme [ 7.925934] BTRFS info (device md2): using free space tree [ 7.925934] BTRFS info (device md2): has skinny extents [ 8.138528] audit: type=1400 audit(1634223522.222:2): apparmor="DENIED" operation="capable" profile="/usr/sbin/dhclient" pid=9653 comm="dhclient" capability=16 capname="sys_module" [ 8.344923] init: dhcp-client (eth0) main process (9438) killed by TERM signal [ 8.351028] aqc111 2-4:1.0 eth1 (unregistered): Failed to write(0x1) reg index 0x0002: -19 [ 8.351029] aqc111 2-4:1.0 eth1 (unregistered): Failed to write(0x1) reg index 0x0002: -19 [ 8.351029] aqc111 2-4:1.0 eth1 (unregistered): Failed to write(0x61) reg index 0x0000: -19 [ 8.351074] init: dhcp-client (eth1) main process (9653) terminated with status 1 [ 8.351099] init: dhcp-client (eth1) main process ended, respawning [ 8.407389] usb 2-4: new SuperSpeed USB device number 5 using xhci_hcd [ 8.413594] aqc111 2-4:1.0 eth1: register 'aqc111' at usb-0000:00:14.0-4, Aquantia AQtion USB to 5GbE Controller, 00:0a:cd:38:eb:15 [ 8.455922] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.455923] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 8.456992] ehci-pci: EHCI PCI platform driver [ 8.462144] uhci_hcd: USB Universal Host Controller Interface driver [ 8.465001] usbcore: registered new interface driver usblp [ 8.468656] usbcore: registered new interface driver usbhid [ 8.468656] usbhid: USB HID core driver [ 8.906081] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(0011327b29df). [ 8.907252] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized [ 8.909352] iSCSI:target_core_device.c:617:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 8.909374] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully [ 8.912680] iSCSI:target_core_file.c:146:fd_attach_hba RODSP plugin for fileio is enabled. [ 8.912681] iSCSI:target_core_file.c:153:fd_attach_hba ODX Token Manager is enabled. [ 8.912683] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled. [ 8.912684] iSCSI:target_core_ep.c:786:ep_attach_hba RODSP plugin for epio is enabled. [ 8.912684] iSCSI:target_core_ep.c:793:ep_attach_hba ODX Token Manager is enabled. [ 8.949997] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use) [ 8.979963] FAT-fs (sdq1): FAT: nls_disk load default table [ 8.981865] FAT-fs (sdq1): FAT: nls_io load default table [ 9.067290] init: iscsi_pluginserverd main process (12192) killed by TERM signal [ 9.067497] init: iscsi_pluginengined main process (12184) killed by TERM signal [ 9.111032] loop: module loaded [ 9.140767] init: scsi_plugin_server main process (12187) killed by TERM signal [ 9.583237] FAT-fs (sdq2): FAT: nls_disk load default table [ 9.583646] FAT-fs (sdq2): FAT: nls_io load default table [ 10.280215] ata3.00: supports DRM functions and may not be fully accessible [ 10.280275] ata3.00: disabling queued TRIM support [ 10.280501] ata3.00: supports DRM functions and may not be fully accessible [ 10.280593] ata3.00: disabling queued TRIM support [ 10.280693] ata3.00: configured for UDMA/133 [ 10.280694] ata3: EH complete [ 10.280710] ata3.00: Enabling discard_zeroes_data [ 31.258772] xhci_hcd 0000:00:14.0: device is plugged out, empty URBs [ 31.268053] usb 2-4: USB disconnect, device number 5 [ 31.268062] aqc111 2-4:1.0 eth1: unregister 'aqc111' usb-0000:00:14.0-4, Aquantia AQtion USB to 5GbE Controller [ 32.213398] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0006: -110 [ 32.213399] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0001: -19 [ 32.213399] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0001: -19 [ 32.213400] aqc111 2-4:1.0 eth1: Failed to read(0x1) reg index 0x0001: -19 [ 32.213400] aqc111 2-4:1.0 eth1: Failed to write(0x1) reg index 0x0001: -19 [ 32.213401] aqc111 2-4:1.0 eth1: Failed to write(0x64) reg index 0x0000: -19 [ 32.213402] aqc111 2-4:1.0 eth1: Failed to write(0x61) reg index 0x0000: -19 [ 32.307481] aqc111 2-4:1.0 eth1 (unregistered): Failed to write(0x1) reg index 0x0002: -19 [ 32.307482] aqc111 2-4:1.0 eth1 (unregistered): Failed to write(0x1) reg index 0x0002: -19 [ 32.307482] aqc111 2-4:1.0 eth1 (unregistered): Failed to write(0x61) reg index 0x0000: -19 [ 32.443452] usb 2-4: new SuperSpeed USB device number 6 using xhci_hcd [ 32.450487] aqc111 2-4:1.0 eth1: register 'aqc111' at usb-0000:00:14.0-4, Aquantia AQtion USB to 5GbE Controller, 00:0a:cd:38:eb:15 this is ifconfig eth1 output: eth1 Link encap:Ethernet HWaddr 00:0A:CD:38:EB:15 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) when i try to up the interface with ifconfig eth1 up, got this: SIOCSIFFLAGS: No such device any advice will be appreciated

по поводу 8.2.2. на DSM6.1.7 ночью перезапускаю службу, днем теряет камеры, в liveview пишет "удалено", после перезапуска службы все возвращается в норму. где чего посмотреть?

у меня 6.1.7, но если мне не изменяет память, на виртуалке я пробовал 6.2 и 8.0.3, работало

всем, привет. ссылки на эту версию можете дать? буду признателен. можно в личку. у меня 8.0.3 с 15-ю камерами как раз с ежедневным перезапуском работает, меня этот вариант устроит на 100%, готов потестировать и отписаться.