pigr8 Posted August 16, 2022 Share #126 Posted August 16, 2022 so i tried to passthough the iGPU in a w10 vm, the hypervisor is the same ofc.. quicksync works just fine on windows, it's correctly detected and used by handbrake [17:15:25] CPU: Intel(R) Core(TM) i3-10100T CPU @ 3.00GHz [17:15:25] - Intel microarchitecture Comet Lake [17:15:25] - logical processor count: 1 [17:15:25] Intel Quick Sync Video support: yes, gpu list: 0 [17:15:25] Intel Quick Sync Video integrated adapter with index 0 [17:15:25] - Intel Media SDK hardware: API 1.35 (minimum: 1.3) [17:15:25] - Decode support: h264 hevc (8bit: yes, 10bit: yes) [17:15:25] - H.264 encoder: yes [17:15:25] - preferred implementation: hardware (1) via D3D11 [17:15:25] - capabilities (hardware): breftype icq+la+i+downs vsinfo opt1 opt2+mbbrc+extbrc+trellis+ib_adapt+nmpslice [17:15:25] - H.265 encoder: yes (8bit: yes, 10bit: yes) [17:15:25] - preferred implementation: hardware (1) via D3D11 [17:15:25] - capabilities (hardware): bpyramid icq vsinfo opt1 so it must be something wrong with the backport, maybe not working as it should, i'm gonna try to spinup an ubuntu vm and check with the newer kernel if quicksync works. bummer. Quote Link to comment Share on other sites More sharing options...
blackmanga Posted August 17, 2022 Author Share #127 Posted August 17, 2022 8 hours ago, pigr8 said: so i tried to passthough the iGPU in a w10 vm, the hypervisor is the same ofc.. quicksync works just fine on windows, it's correctly detected and used by handbrake [17:15:25] CPU: Intel(R) Core(TM) i3-10100T CPU @ 3.00GHz [17:15:25] - Intel microarchitecture Comet Lake [17:15:25] - logical processor count: 1 [17:15:25] Intel Quick Sync Video support: yes, gpu list: 0 [17:15:25] Intel Quick Sync Video integrated adapter with index 0 [17:15:25] - Intel Media SDK hardware: API 1.35 (minimum: 1.3) [17:15:25] - Decode support: h264 hevc (8bit: yes, 10bit: yes) [17:15:25] - H.264 encoder: yes [17:15:25] - preferred implementation: hardware (1) via D3D11 [17:15:25] - capabilities (hardware): breftype icq+la+i+downs vsinfo opt1 opt2+mbbrc+extbrc+trellis+ib_adapt+nmpslice [17:15:25] - H.265 encoder: yes (8bit: yes, 10bit: yes) [17:15:25] - preferred implementation: hardware (1) via D3D11 [17:15:25] - capabilities (hardware): bpyramid icq vsinfo opt1 so it must be something wrong with the backport, maybe not working as it should, i'm gonna try to spinup an ubuntu vm and check with the newer kernel if quicksync works. bummer. https://forum.proxmox.com/threads/alder-lake-gvt-d-integrated-graphics-passthrough.105983/ Quote Link to comment Share on other sites More sharing options...
pigr8 Posted August 17, 2022 Share #128 Posted August 17, 2022 i finally got it working.. multiple streams from different devices at once, cpu utilization is really low on a i3-10100T @stock frequency. Quote Link to comment Share on other sites More sharing options...
blackmanga Posted August 17, 2022 Author Share #129 Posted August 17, 2022 5 minutes ago, pigr8 said: i finally got it working.. multiple streams from different devices at once, cpu utilization is really low on a i3-10100T @stock frequency. Awesome. For everyone’s benefit what did you do to make it work in the VM Quote Link to comment Share on other sites More sharing options...
pigr8 Posted August 17, 2022 Share #130 Posted August 17, 2022 10 minutes ago, blackmanga said: Awesome. For everyone’s benefit what did you do to make it work in the VM the gpu passthrough was working fine on Windows (detection, drivers install and so on) so that could not be an Hypervisor problem (VMWare ESXi 7.0f3), vt-d and vt-x enabled, could not figure out why it says "Killed" in Syno terminal, and it still does. i changed the ARPL boot from bios to efi (hypervisor was also already efi boot) and thats the only thing i did actually (and fix the *.bin wrong header files problem in arpl-addons), recreated the docker container with the /dev/dri mapped (permission correctly fixed), enabled the hw transcoding and encoding and now it shows the damn (hw) while streaming. i have to spin up a DVA test vm to see if face recognition also works in Surveillance Station, seems that the ds920+ i'm using does not have it, bummer. i did not test Video Station but i dont actually use that, i guess it "should" also work. Quote Link to comment Share on other sites More sharing options...
blackmanga Posted August 17, 2022 Author Share #131 Posted August 17, 2022 2 minutes ago, pigr8 said: the gpu passthrough was working fine on Windows (detection, drivers install and so on) so that could not be an Hypervisor problem (VMWare ESXi 7.0f3), vt-d and vt-x enabled, could not figure out why it says "Killed" in Syno terminal, and it still does. i changed the ARPL boot from bios to efi (hypervisor was also already efi boot) and thats the only thing i did actually (and fix the *.bin wrong header files problem in arpl-addons), recreated the docker container with the /dev/dri mapped (permission correctly fixed), enabled the hw transcoding and encoding and now it shows the damn (hw) while streaming. i have to spin up a DVA test vm to see if face recognition also works in Surveillance Station, seems that the ds920+ i'm using does not have it, bummer. i did not test Video Station but i dont actually use that, i guess it "should" also work. Ok, that’s really good to know. So the drivers are fine 👍🏻 wrt video station, it has own issues and ffmpeg needs to be patched. I haven’t had much success making that work. For me, plex/jellyfin hw transcoding was critical and those have been tested to work. Quote Link to comment Share on other sites More sharing options...
pigr8 Posted August 17, 2022 Share #132 Posted August 17, 2022 (edited) 15 minutes ago, blackmanga said: Ok, that’s really good to know. So the drivers are fine 👍🏻 wrt video station, it has own issues and ffmpeg needs to be patched. I haven’t had much success making that work. For me, plex/jellyfin hw transcoding was critical and those have been tested to work. oh yeah i'm not gonna bother either with that thing.. i'm gonna try to see if tdarr is using quicksync also. edit: also, to make the iGPU passthough working correctly in ESXi i had to issue a "esxcli system settings kernel set -s vga -v FALSE" from terminal and reboot the supervisor.. it disables the ESXi video terminal function (no hdmi/dp output once booted) but it gives the igpu the ability to be passed to a vm without issues. multi-vm passthough is not supported tho, but that's probably related to Intel limitation. Edited August 17, 2022 by pigr8 Quote Link to comment Share on other sites More sharing options...
blackmanga Posted August 17, 2022 Author Share #133 Posted August 17, 2022 26 minutes ago, pigr8 said: oh yeah i'm not gonna bother either with that thing.. i'm gonna try to see if tdarr is using quicksync also. edit: also, to make the iGPU passthough working correctly in ESXi i had to issue a "esxcli system settings kernel set -s vga -v FALSE" from terminal and reboot the supervisor.. it disables the ESXi video terminal function (no hdmi/dp output once booted) but it gives the igpu the ability to be passed to a vm without issues. multi-vm passthough is not supported tho, but that's probably related to Intel limitation. understood. Thank you for the above and testing it out. Enjoy Quote Link to comment Share on other sites More sharing options...
Zardozlv Posted September 6, 2022 Share #134 Posted September 6, 2022 Tested this driver in 920+ 7.1.1-42961, but not working anymore, can you fix it? I'm using i3-10105 Quote Link to comment Share on other sites More sharing options...
blackmanga Posted September 6, 2022 Author Share #135 Posted September 6, 2022 (edited) 20 minutes ago, Zardozlv said: Tested this driver in 920+ 7.1.1-42961, but not working anymore, can you fix it? I'm using i3-10105 Is the version for Linux changed in the new DSM ? can you give me the output for uname -r also, was it working in previous versions ? do you see any error messages ? (dmesg, cat /var/log/messages ) Edited September 6, 2022 by blackmanga extra Quote Link to comment Share on other sites More sharing options...
pigr8 Posted September 6, 2022 Share #136 Posted September 6, 2022 6 hours ago, blackmanga said: Is the version for Linux changed in the new DSM ? can you give me the output for uname -r also, was it working in previous versions ? do you see any error messages ? (dmesg, cat /var/log/messages ) Linux DiskStation 4.4.180+ #42962 SMP Sat Sep 3 22:22:17 CST 2022 x86_64 GNU/Linux synology_geminilake_920+ should be the same as before it kernel panics and stops the vm for me also, i could not figure out what that was until i rebuild arpl without the igpu drivers and it boots fine now. Quote Link to comment Share on other sites More sharing options...
blackmanga Posted September 6, 2022 Author Share #137 Posted September 6, 2022 8 minutes ago, pigr8 said: Linux DiskStation 4.4.180+ #42962 SMP Sat Sep 3 22:22:17 CST 2022 x86_64 GNU/Linux synology_geminilake_920+ should be the same as before it kernel panics and stops the vm for me also, i could not figure out what that was until i rebuild arpl without the igpu drivers and it boots fine now. hmm then it must be something else that would have changed. I am still on 7.0.1 and not updating for now. what error messages are you getting Quote Link to comment Share on other sites More sharing options...
pigr8 Posted September 7, 2022 Share #138 Posted September 7, 2022 On 9/6/2022 at 12:16 PM, blackmanga said: hmm then it must be something else that would have changed. I am still on 7.0.1 and not updating for now. what error messages are you getting here you have a try to in_modules.sh [13034.313725] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [13034.315500] Failed to add WC MTRR for [00000000d0000000-00000000dfffffff]; performance may suffer. [13034.320774] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [13034.322263] [drm] Driver supports precise vblank timestamp query. [13034.323579] i915 0000:03:00.0: BAR 6: can't assign [??? 0x00000000 flags 0x20000000] (bogus alignment) [13034.325575] [drm] Failed to find VBIOS tables (VBT) [13034.326916] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [13034.329680] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [13034.331556] BUG: unable to handle kernel NULL pointer dereference at (null) [13034.333274] IP: [< (null)>] (null) [13034.334378] PGD 0 [13034.334859] Oops: 0010 [#1] SMP [13034.335622] Modules linked in: i915(E+) video(E) backlight(E) iosf_mbi(E) drm_kms_helper(E) drm(E) i2c_algo_bit(E) fb(E) nfnetlink xfrm_user xfrm_algo xt_ipvs ip_vs_rr ip_vs xt_mark iptable_mangle br_netfilter bridge stp aufs macvlan veth xt_conntrack xt_addrtype nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipt_MASQUERADE xt_REDIRECT nf_nat_masquerade_ipv4 xt_nat iptable_nat nf_nat_ipv4 nf_nat_redirect nf_nat xt_recent xt_iprange xt_limit xt_state xt_tcpudp xt_multiport xt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack iptable_filter ip_tables x_tables fuse vfat fat 8021q vhost_scsi(O) vhost(O) tcm_loop(O) iscsi_target_mod(O) target_core_user(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O) syno_extent_pool(PO) rodsp_ep(O) [13034.352407] udf isofs synoacl_vfs(PO) raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx nfsd btrfs ecryptfs zstd_decompress zstd_compress xxhash xor raid6_pq lockd grace rpcsec_gss_krb5 auth_rpcgss sunrpc leds_lp3943 aesni_intel glue_helper lrw gf128mul ablk_helper geminilake_synobios(PO) usblp syscopyarea sysfillrect sysimgblt fb_sys_fops cfbfillrect cfbcopyarea cfbimgblt drm_panel_orientation_quirks fbdev uhci_hcd zram usb_storage r8168(O) sg dm_snapshot dm_bufio crc_itu_t crc_ccitt psnap p8022 llc hfsplus md4 hmac sit tunnel4 ipv6 flashcache_syno(O) flashcache(O) syno_flashcache_control(O) dm_mod arc4 crc32c_intel cryptd ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance processor cpufreq_stats vxlan ip6_udp_tunnel udp_tunnel ip_tunnel [13034.366501] loop hid_generic usbhid hid sha256_generic synorbd(PO) synofsbd(PO) etxhci_hcd vmxnet3(OE) vmw_vmci(E) button xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common [last unloaded: fb] [13034.369128] CPU: 2 PID: 4641 Comm: insmod Tainted: P OE 4.4.180+ #42962 [13034.370181] Hardware name: VMware, Inc. VMware7,1/440BX Desktop Reference Platform, BIOS VMW71.00V.18227214.B64.2106252220 06/25/2021 [13034.371877] task: ffff88020d651980 ti: ffff88025d930000 task.ti: ffff88025d930000 [13034.372909] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [13034.373965] RSP: 0018:ffff88025d9338a0 EFLAGS: 00010246 [13034.374714] RAX: ffff88001bd88040 RBX: ffff88025d86beb8 RCX: 0000000000000000 [13034.375697] RDX: 0000000000000000 RSI: ffff88001bd88300 RDI: ffff88001bd88040 [13034.376680] RBP: ffff88025d9338c8 R08: ffffffffa0f0a470 R09: ffff88001bd88040 [13034.377664] R10: 0000000000001000 R11: 00000000fffff000 R12: ffff88001bd88300 [13034.378646] R13: 0000000000000000 R14: ffff88025d86ba18 R15: ffff88025d86be78 [13034.379652] FS: 00007f2f47411740(0000) GS:ffff880272d00000(0000) knlGS:0000000000000000 [13034.380755] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [13034.381583] CR2: 0000000000000000 CR3: 00000001005b4000 CR4: 00000000003606f0 [13034.382606] Stack: [13034.382884] ffffffff812e12b1 ffff88001bd882c0 0000000100000000 0000000000001000 [13034.383972] 0000000000000000 ffff88025d9338d8 ffffffffa0f0a878 ffff88025d933968 [13034.385076] ffffffffa0f0ae3a ffff88025d86b968 ffff88001bd882c0 0000000000000000 [13034.386238] Call Trace: [13034.386571] [<ffffffff812e12b1>] ? __rb_insert_augmented+0xe1/0x1d0 [13034.387459] [<ffffffffa0f0a878>] drm_mm_interval_tree_add_node+0xc8/0xe0 [drm] [13034.388468] [<ffffffffa0f0ae3a>] drm_mm_insert_node_in_range+0x23a/0x4a0 [drm] [13034.389495] [<ffffffffa0fe5d7f>] i915_gem_gtt_insert+0xaf/0x1b0 [i915] [13034.390421] [<ffffffffa0ffb771>] __i915_vma_do_pin+0x381/0x490 [i915] [13034.391348] [<ffffffffa10039b2>] logical_render_ring_init+0x2f2/0x3b0 [i915] [13034.392351] [<ffffffffa1001e40>] ? gen8_init_rcs_context+0x50/0x50 [i915] [13034.393305] [<ffffffffa0ffdbcc>] intel_engines_init+0x4c/0xc0 [i915] [13034.394205] [<ffffffffa0fed5b3>] i915_gem_init+0x183/0x520 [i915] [13034.395049] [<ffffffffa106ab80>] ? intel_setup_gmbus+0x210/0x290 [i915] [13034.395966] [<ffffffffa0f073ae>] ? drm_irq_install+0xbe/0x140 [drm] [13034.396867] [<ffffffffa0fa895d>] i915_driver_load+0xb6d/0x1660 [i915] [13034.397775] [<ffffffff814a1330>] ? of_clk_set_defaults.cold.1+0x87/0x87 [13034.398759] [<ffffffffa0fb35b2>] i915_pci_probe+0x22/0x40 [i915] [13034.399630] [<ffffffff813207b0>] pci_device_probe+0x90/0x100 [13034.400441] [<ffffffff813b5113>] driver_probe_device+0x1c3/0x280 [13034.401293] [<ffffffff813b5249>] __driver_attach+0x79/0x80 [13034.402024] [<ffffffff813b51d0>] ? driver_probe_device+0x280/0x280 [13034.402901] [<ffffffff813b32e9>] bus_for_each_dev+0x69/0xa0 [13034.403735] [<ffffffff813b4a59>] driver_attach+0x19/0x20 [13034.404492] [<ffffffff813b46ac>] bus_add_driver+0x19c/0x1e0 [13034.405304] [<ffffffffa10e2000>] ? 0xffffffffa10e2000 [13034.405984] [<ffffffff813b59eb>] driver_register+0x6b/0xc0 [13034.406772] [<ffffffff8131f251>] __pci_register_driver+0x41/0x50 [13034.407644] [<ffffffffa10e2029>] i915_init+0x29/0x4a [i915] [13034.408447] [<ffffffff81000340>] do_one_initcall+0x80/0x130 [13034.409263] [<ffffffff811616e9>] ? __vunmap+0x99/0xf0 [13034.409958] [<ffffffff8116f9cd>] ? kfree+0x13d/0x160 [13034.410679] [<ffffffff810bdb3b>] do_init_module+0x5b/0x1d0 [13034.411469] [<ffffffff810bf914>] load_module+0x1be4/0x2080 [13034.412257] [<ffffffff810bc7c0>] ? __symbol_put+0x40/0x40 [13034.412993] [<ffffffff811899bc>] ? kernel_read+0x3c/0x50 [13034.413760] [<ffffffff810bff6d>] SYSC_finit_module+0x7d/0xa0 [13034.414597] [<ffffffff810bffa9>] SyS_finit_module+0x9/0x10 [13034.415422] [<ffffffff8156c84a>] entry_SYSCALL_64_fastpath+0x1e/0x8e [13034.416327] Code: Bad RIP value. [13034.416828] RIP [< (null)>] (null) [13034.417581] RSP <ffff88025d9338a0> [13034.418058] CR2: 0000000000000000 [13034.418553] ---[ end trace 954c416bf4bfb73b ]--- Quote Link to comment Share on other sites More sharing options...
blackmanga Posted September 7, 2022 Author Share #139 Posted September 7, 2022 (edited) 33 minutes ago, pigr8 said: here you have a try to in_modules.sh [13034.313725] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [13034.315500] Failed to add WC MTRR for [00000000d0000000-00000000dfffffff]; performance may suffer. [13034.320774] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [13034.322263] [drm] Driver supports precise vblank timestamp query. [13034.323579] i915 0000:03:00.0: BAR 6: can't assign [??? 0x00000000 flags 0x20000000] (bogus alignment) [13034.325575] [drm] Failed to find VBIOS tables (VBT) [13034.326916] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [13034.329680] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [13034.331556] BUG: unable to handle kernel NULL pointer dereference at (null) [13034.333274] IP: [< (null)>] (null) [13034.334378] PGD 0 [13034.334859] Oops: 0010 [#1] SMP [13034.335622] Modules linked in: i915(E+) video(E) backlight(E) iosf_mbi(E) drm_kms_helper(E) drm(E) i2c_algo_bit(E) fb(E) nfnetlink xfrm_user xfrm_algo xt_ipvs ip_vs_rr ip_vs xt_mark iptable_mangle br_netfilter bridge stp aufs macvlan veth xt_conntrack xt_addrtype nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipt_MASQUERADE xt_REDIRECT nf_nat_masquerade_ipv4 xt_nat iptable_nat nf_nat_ipv4 nf_nat_redirect nf_nat xt_recent xt_iprange xt_limit xt_state xt_tcpudp xt_multiport xt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack iptable_filter ip_tables x_tables fuse vfat fat 8021q vhost_scsi(O) vhost(O) tcm_loop(O) iscsi_target_mod(O) target_core_user(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O) syno_extent_pool(PO) rodsp_ep(O) [13034.352407] udf isofs synoacl_vfs(PO) raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx nfsd btrfs ecryptfs zstd_decompress zstd_compress xxhash xor raid6_pq lockd grace rpcsec_gss_krb5 auth_rpcgss sunrpc leds_lp3943 aesni_intel glue_helper lrw gf128mul ablk_helper geminilake_synobios(PO) usblp syscopyarea sysfillrect sysimgblt fb_sys_fops cfbfillrect cfbcopyarea cfbimgblt drm_panel_orientation_quirks fbdev uhci_hcd zram usb_storage r8168(O) sg dm_snapshot dm_bufio crc_itu_t crc_ccitt psnap p8022 llc hfsplus md4 hmac sit tunnel4 ipv6 flashcache_syno(O) flashcache(O) syno_flashcache_control(O) dm_mod arc4 crc32c_intel cryptd ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance processor cpufreq_stats vxlan ip6_udp_tunnel udp_tunnel ip_tunnel [13034.366501] loop hid_generic usbhid hid sha256_generic synorbd(PO) synofsbd(PO) etxhci_hcd vmxnet3(OE) vmw_vmci(E) button xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common [last unloaded: fb] [13034.369128] CPU: 2 PID: 4641 Comm: insmod Tainted: P OE 4.4.180+ #42962 [13034.370181] Hardware name: VMware, Inc. VMware7,1/440BX Desktop Reference Platform, BIOS VMW71.00V.18227214.B64.2106252220 06/25/2021 [13034.371877] task: ffff88020d651980 ti: ffff88025d930000 task.ti: ffff88025d930000 [13034.372909] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [13034.373965] RSP: 0018:ffff88025d9338a0 EFLAGS: 00010246 [13034.374714] RAX: ffff88001bd88040 RBX: ffff88025d86beb8 RCX: 0000000000000000 [13034.375697] RDX: 0000000000000000 RSI: ffff88001bd88300 RDI: ffff88001bd88040 [13034.376680] RBP: ffff88025d9338c8 R08: ffffffffa0f0a470 R09: ffff88001bd88040 [13034.377664] R10: 0000000000001000 R11: 00000000fffff000 R12: ffff88001bd88300 [13034.378646] R13: 0000000000000000 R14: ffff88025d86ba18 R15: ffff88025d86be78 [13034.379652] FS: 00007f2f47411740(0000) GS:ffff880272d00000(0000) knlGS:0000000000000000 [13034.380755] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [13034.381583] CR2: 0000000000000000 CR3: 00000001005b4000 CR4: 00000000003606f0 [13034.382606] Stack: [13034.382884] ffffffff812e12b1 ffff88001bd882c0 0000000100000000 0000000000001000 [13034.383972] 0000000000000000 ffff88025d9338d8 ffffffffa0f0a878 ffff88025d933968 [13034.385076] ffffffffa0f0ae3a ffff88025d86b968 ffff88001bd882c0 0000000000000000 [13034.386238] Call Trace: [13034.386571] [<ffffffff812e12b1>] ? __rb_insert_augmented+0xe1/0x1d0 [13034.387459] [<ffffffffa0f0a878>] drm_mm_interval_tree_add_node+0xc8/0xe0 [drm] [13034.388468] [<ffffffffa0f0ae3a>] drm_mm_insert_node_in_range+0x23a/0x4a0 [drm] [13034.389495] [<ffffffffa0fe5d7f>] i915_gem_gtt_insert+0xaf/0x1b0 [i915] [13034.390421] [<ffffffffa0ffb771>] __i915_vma_do_pin+0x381/0x490 [i915] [13034.391348] [<ffffffffa10039b2>] logical_render_ring_init+0x2f2/0x3b0 [i915] [13034.392351] [<ffffffffa1001e40>] ? gen8_init_rcs_context+0x50/0x50 [i915] [13034.393305] [<ffffffffa0ffdbcc>] intel_engines_init+0x4c/0xc0 [i915] [13034.394205] [<ffffffffa0fed5b3>] i915_gem_init+0x183/0x520 [i915] [13034.395049] [<ffffffffa106ab80>] ? intel_setup_gmbus+0x210/0x290 [i915] [13034.395966] [<ffffffffa0f073ae>] ? drm_irq_install+0xbe/0x140 [drm] [13034.396867] [<ffffffffa0fa895d>] i915_driver_load+0xb6d/0x1660 [i915] [13034.397775] [<ffffffff814a1330>] ? of_clk_set_defaults.cold.1+0x87/0x87 [13034.398759] [<ffffffffa0fb35b2>] i915_pci_probe+0x22/0x40 [i915] [13034.399630] [<ffffffff813207b0>] pci_device_probe+0x90/0x100 [13034.400441] [<ffffffff813b5113>] driver_probe_device+0x1c3/0x280 [13034.401293] [<ffffffff813b5249>] __driver_attach+0x79/0x80 [13034.402024] [<ffffffff813b51d0>] ? driver_probe_device+0x280/0x280 [13034.402901] [<ffffffff813b32e9>] bus_for_each_dev+0x69/0xa0 [13034.403735] [<ffffffff813b4a59>] driver_attach+0x19/0x20 [13034.404492] [<ffffffff813b46ac>] bus_add_driver+0x19c/0x1e0 [13034.405304] [<ffffffffa10e2000>] ? 0xffffffffa10e2000 [13034.405984] [<ffffffff813b59eb>] driver_register+0x6b/0xc0 [13034.406772] [<ffffffff8131f251>] __pci_register_driver+0x41/0x50 [13034.407644] [<ffffffffa10e2029>] i915_init+0x29/0x4a [i915] [13034.408447] [<ffffffff81000340>] do_one_initcall+0x80/0x130 [13034.409263] [<ffffffff811616e9>] ? __vunmap+0x99/0xf0 [13034.409958] [<ffffffff8116f9cd>] ? kfree+0x13d/0x160 [13034.410679] [<ffffffff810bdb3b>] do_init_module+0x5b/0x1d0 [13034.411469] [<ffffffff810bf914>] load_module+0x1be4/0x2080 [13034.412257] [<ffffffff810bc7c0>] ? __symbol_put+0x40/0x40 [13034.412993] [<ffffffff811899bc>] ? kernel_read+0x3c/0x50 [13034.413760] [<ffffffff810bff6d>] SYSC_finit_module+0x7d/0xa0 [13034.414597] [<ffffffff810bffa9>] SyS_finit_module+0x9/0x10 [13034.415422] [<ffffffff8156c84a>] entry_SYSCALL_64_fastpath+0x1e/0x8e [13034.416327] Code: Bad RIP value. [13034.416828] RIP [< (null)>] (null) [13034.417581] RSP <ffff88025d9338a0> [13034.418058] CR2: 0000000000000000 [13034.418553] ---[ end trace 954c416bf4bfb73b ]--- This looks like the same issue as what you had before. It’s VM ware issue. Failed to find VBIOS tables (VBT) Edited September 7, 2022 by blackmanga Vbios Quote Link to comment Share on other sites More sharing options...
pigr8 Posted September 7, 2022 Share #140 Posted September 7, 2022 but nothing changed on the hypervisor, only the dsm vm changed with the update. meh Quote Link to comment Share on other sites More sharing options...
blackmanga Posted September 7, 2022 Author Share #141 Posted September 7, 2022 Unfortunately I can’t really help you here. This is where my expertise ends. to me it looks like a VM issue and that’s what the missing vbios error seems to say. maybe you could try some of the links I shared earlier if they have any suggestions. alternatively you can roll back to the earlier version as it was working for you before Quote Link to comment Share on other sites More sharing options...
xuchuan Posted September 12, 2022 Share #142 Posted September 12, 2022 Before this, I ran your code successfully. However, I've switched to unraid now, using GTV-G, Assigned the nuclear display to 918-7.1-42951, But now there is an error and I don't know how to fix it ./in_modules.sh: line 10: 21836 Killed insmod i915.ko Quote Link to comment Share on other sites More sharing options...
blackmanga Posted September 13, 2022 Author Share #143 Posted September 13, 2022 10 hours ago, xuchuan said: Before this, I ran your code successfully. However, I've switched to unraid now, using GTV-G, Assigned the nuclear display to 918-7.1-42951, But now there is an error and I don't know how to fix it ./in_modules.sh: line 10: 21836 Killed insmod i915.ko https://forum.proxmox.com/threads/alder-lake-gvt-d-integrated-graphics-passthrough.105983/ please go through the link here. It’s not specific to unraid, but it does seem to suggest that gtv-g might not work and you have to use gtv-d method. the issue you are facing is not related to the driver, but how you set up the VM for hw transcoding. so you will have better information/advice at unraid forums. Quote Link to comment Share on other sites More sharing options...
xuchuan Posted September 27, 2022 Share #144 Posted September 27, 2022 On 9/13/2022 at 8:07 AM, blackmanga said: https://forum.proxmox.com/threads/alder-lake-gvt-d-integrated-graphics-passthrough.105983/ please go through the link here. It’s not specific to unraid, but it does seem to suggest that gtv-g might not work and you have to use gtv-d method. the issue you are facing is not related to the driver, but how you set up the VM for hw transcoding. so you will have better information/advice at unraid forums. I am happy to inform you that I have modified the PCI slot location in the XML configuration file of the unraid virtual machine (the core display location is modified to 0000:00:02.0). Due to insufficient core memory, I can only assign the core graphics card to 2 VMs. Because I have an MSI 1660S graphics card, the rest of the virtual machines use VGPU, which solves the problem perfectly. However, the nuclear display decoding of the DSM version can only work under 7.1-42951, and it still does not work under 7.1-42962. I pray that I can work stably in the later period, and I am no longer tossing them. 1 Quote Link to comment Share on other sites More sharing options...
blackmanga Posted September 28, 2022 Author Share #145 Posted September 28, 2022 Super ! Quote Link to comment Share on other sites More sharing options...
phytan Posted November 3, 2022 Share #146 Posted November 3, 2022 On 7/18/2022 at 10:47 AM, blackmanga said: https://mega.nz/folder/rl8xxT7L#ddCwt1mHR1ctxLL0LVKnXA Hi, I download the 918+ files and upload all ko and bin to 918+ 7.1.1 42926up1, but it doesn't work. It shows: ./in_modules.sh: line 10: 15888 Killed insmod i915.ko And there is no output with ls /dev/dri. I guess maybe this patch can only be used for 7.0.1? Please help. Quote Link to comment Share on other sites More sharing options...
blackmanga Posted November 3, 2022 Author Share #147 Posted November 3, 2022 27 minutes ago, phytan said: Hi, I download the 918+ files and upload all ko and bin to 918+ 7.1.1 42926up1, but it doesn't work. It shows: ./in_modules.sh: line 10: 15888 Killed insmod i915.ko And there is no output with ls /dev/dri. I guess maybe this patch can only be used for 7.0.1? Please help. Hi, some more details will help. what system are you using CPU etc. is it virtualized or bare metal. there is no kernel change from 7.0.1 to 7.1.1, so technically the same modules will work. pls give output of dmesg and /var/log/messages Quote Link to comment Share on other sites More sharing options...
phytan Posted November 3, 2022 Share #148 Posted November 3, 2022 1 hour ago, blackmanga said: Hi, some more details will help. what system are you using CPU etc. is it virtualized or bare metal. there is no kernel change from 7.0.1 to 7.1.1, so technically the same modules will work. pls give output of dmesg and /var/log/messages Thank you for the reply. I'm using 10400 and gvt-g plugin in unraid, to share the 10400 GPU to a Q35 virtual DS918+. The shared gpu works fine in another Win10 VM, but not working in DSM. Here are the logs: logmessages.txt dmesg.txt Quote Link to comment Share on other sites More sharing options...
blackmanga Posted November 3, 2022 Author Share #149 Posted November 3, 2022 40 minutes ago, phytan said: Thank you for the reply. I'm using 10400 and gvt-g plugin in unraid, to share the 10400 GPU to a Q35 virtual DS918+. The shared gpu works fine in another Win10 VM, but not working in DSM. Here are the logs: logmessages.txt 256.99 kB · 0 downloads dmesg.txt 21.77 kB · 0 downloads Please check the note from post #144 above. It’s something to do with unraid. The user was able to make it work on 7.1 42951 though Quote Link to comment Share on other sites More sharing options...
phytan Posted November 3, 2022 Share #150 Posted November 3, 2022 (edited) 1 hour ago, blackmanga said: Please check the note from post #144 above. It’s something to do with unraid. The user was able to make it work on 7.1 42951 though I have already used the pci address 0000:00:02.0. It looks like something is wrong in 42962. Unfortunately, I just tried the arpl loader which cannot support 42951 now. I will try again if it is fixed. Thank you. Edit: I just tried 42661, the driver works. I guess there is something different in 42962. Edited November 3, 2022 by phytan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.