iceget Posted February 18, 2016 #1 Posted February 18, 2016 dear community, i have a HP ProLiant G7 MicroServer N54L Server installed with XPEnoboot 5.2-5644.5 and DSM_5.2-5644 Update-3. the four harddiscs in the bays are correctly detected. but i have installed one more harddisc (onboard SATA board). this HDD are detected from BIOS but in DSM there is no additionally HDD detected. how i can bypass them? thanks many greets, iceget
brantje Posted February 18, 2016 #2 Posted February 18, 2016 Can you boot with a linux live usb stick too see if the disks are detected? Posted via MyXpenology
Hackerjac Posted February 18, 2016 #4 Posted February 18, 2016 you need to install the hacked bios from here http://xpenology.me/downloads
iceget Posted February 18, 2016 Author #5 Posted February 18, 2016 Hello, thanks for your info, but it's not working but i have updated the bios. i tried to upload my photos, but its not possible (board attachment quota has been reached). so now i have uploaded the photos to my website: # bios info http://www.raving.at/DSMHP/00.jpg # screenshots http://www.raving.at/DSMHP/01.jpg http://www.raving.at/DSMHP/02.jpg can you help me? thanks
Hackerjac Posted February 18, 2016 #6 Posted February 18, 2016 http://i151.photobucket.com/albums/s156 ... C00021.jpg Make sure that the one with red arrow is set to disable in your bios
iceget Posted February 18, 2016 Author #7 Posted February 18, 2016 Hello, thanks. i have deactivated this, but not success result. same as before. i have now built in other 5 hdds and installed dsm 4.2 on the same bios and same hp proliant, all 5 discs are appearing in the system.. what i do wrong? Can you help me? thanks!
iceget Posted February 19, 2016 Author #8 Posted February 19, 2016 *push* can anybody help me? what can i try? - live system booting (via knoppix or ubuntu) all 5 hdds detected. - dsm 4.2 on same hardware, all 5 hdds detected - bios all 5 hdds detected thanks
Huberer Posted February 19, 2016 #9 Posted February 19, 2016 Did you add the command rmmod=ata_piix/code] to the syslinux.cfg on your boot loader? Like described here [u][b]https://idmedia.no/projects/xpenology/installing-or-upgrading-to-xpenology-5-2-or-later/[/b][/u]. If no just try it.
iceget Posted February 19, 2016 Author #10 Posted February 19, 2016 Hello, i have added this to the end of string: LABEL xpenology MENU LABEL XPEnology DSM 5.2-5644 KERNEL /zImage APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=B3J4N01003 vid=0x0781 pid=0x5567 loglevel=0 vga=0x305 rmmod=ata_piix not working... @ Hackerjac: if i disable your recommendation (from your post), my harddisc dosnt appears in bios. i have set the bios to the default version. what i can do? thanks
Huberer Posted February 20, 2016 #11 Posted February 20, 2016 Did you add it three times in syslinux.cfg? It should look like this: UI menu.c32 PROMPT 0 TIMEOUT 50 DEFAULT xpenology MENU TITLE XPEnoboot 5.2-5644.4-df9e09c LABEL xpenology MENU LABEL XPEnology DSM 5.2-5644 KERNEL /zImage APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=XXXXXXXXXX mac1=XXXXXXXXXXXX rmmod=ata_piix vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 LABEL debug MENU LABEL XPEnology DSM 5.2-5644 Debug KERNEL /zImage APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=XXXXXXXXXX mac1=XXXXXXXXXXXX rmmod=ata_piix vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 debug=1 LABEL install MENU LABEL XPEnology DSM 5.2-5644 Install/Upgrade KERNEL /zImage APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=XXXXXXXXXX mac1=XXXXXXXXXXXX rmmod=ata_piix vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 upgrade=5.2-5644 The string should added direct after mac-address and if you don't have it direct after serial number Just try it again
rhplus Posted February 20, 2016 #12 Posted February 20, 2016 Tried on my similare HW : HP ProLiant G7 MicroServer N40L. Seems its working. Can u check info from //Control Panel / Info Center / Storage?
Hackerjac Posted February 20, 2016 #13 Posted February 20, 2016 Hello, i have added this to the end of string: LABEL xpenology MENU LABEL XPEnology DSM 5.2-5644 KERNEL /zImage APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=B3J4N01003 vid=0x0781 pid=0x5567 loglevel=0 vga=0x305 rmmod=ata_piix not working... @ Hackerjac: if i disable your recommendation (from your post), my harddisc dosnt appears in bios. i have set the bios to the default version. what i can do? thanks Its what i have done on both my n36l and its working with 6 drives in each Are you running bare metal, esxi or what ?
iceget Posted February 22, 2016 Author #14 Posted February 22, 2016 hello peoples, thanks. now i have moved the rmmod=ata_piix line like your post. no result. in bios the harddisc was detected, but not in DSM. if i go to system info, storage only 4 harddiscs are detected. what i made wrong? so now i have installed (for test) a raidcontroller which i leave unconfigured with no array. dsm dedects perfectly. but only on the SATA port, no chance to get working? anybody here there have a HP ProLiant G7 Micro Server N54L witht the same setup?? 4 hdds in the bays, and one directly onboard? thank you!
iceget Posted February 22, 2016 Author #15 Posted February 22, 2016 if disable the Sata ide combined mode, the 5. hdd not appears in bios. only if i enable this function the hdd appears in bios and live system linux (for test).
Recommended Posts