torrington Posted April 13, 2020 Share #1 Posted April 13, 2020 Hi, I'm trying my first install on MSI b85M-p33. So far I've manage to download and install jun's V1.04b ds918+ on a pendrive. I've managed to boot and then locate using synology assistant (first run won't catch, but a second always does) Then select pat image "DSM_DS918+_24922" and later start intallation normally. After some time the assistant show system is rebooting and computer reboots. From then on, computer stays on black screen and assistant showing countdown. After countdown ends, it looks like it start writing configuration files, but always end up failing. Also after de reboot can longer ping to the Ip aquiered in the first boot. Would apreciate any help on the matter, specially what is suposed to happen after the reboot. Quote Link to comment Share on other sites More sharing options...
vanst Posted April 14, 2020 Share #2 Posted April 14, 2020 Hi, May I know what CPU you are using? Did you check that the CPU and your loader is compatible, please refer the below post. Also, I would suggest to give a try with 1.03b DS3615xs and see the result. Quote Link to comment Share on other sites More sharing options...
torrington Posted April 14, 2020 Author Share #3 Posted April 14, 2020 Vanst, thank you for your replay. Processor is I5 4440 Haswell. I've tried 1.03b ds3615xs as per suggestion but it fails during first part of the install. It looks for me, that after the reboot I lost network connection, and that is the reason it fails. I hope someone can help me with this. Thanks. Quote Link to comment Share on other sites More sharing options...
pmchan Posted April 15, 2020 Share #4 Posted April 15, 2020 Same "problem" as many others, I suppose, your integrated network chipset Realtek 8111G, is not supported by DSM 6.2.2. You could check by installing older DSM 6.2.1, if it works ok then your 8111G is the culprit. I suggest you buy a cheap HP NC360T on ebay and disable integrated nic, then 6.2.2 should be visible after reboot. Quote Link to comment Share on other sites More sharing options...
pmchan Posted April 15, 2020 Share #5 Posted April 15, 2020 Sorry, latest 6.2.1 may also be problematic with a 8111G, you could try 6.1.7. Again, the better solution is to buy a compatible nic, but I've read 6.2.3-25423 was just released so I suggest you to keep an eye on this thread and wait a bit to see which nic is still compatible with this new DSM version. Quote Link to comment Share on other sites More sharing options...
torrington Posted April 16, 2020 Author Share #6 Posted April 16, 2020 You were right. 6.1.7 did work. It's a shame I can't install newer version, but will keep an eye on 6.2.3 release. If there is any other suggestion will be more than welcome. Thank's to everyone. Quote Link to comment Share on other sites More sharing options...
djvas335 Posted April 16, 2020 Share #7 Posted April 16, 2020 Did you try extra.lzma ? 2 hours ago, torrington said: You were right. 6.1.7 did work. It's a shame I can't install newer version, but will keep an eye on 6.2.3 release. If there is any other suggestion will be more than welcome. Thank's to everyone. Quote Link to comment Share on other sites More sharing options...
torrington Posted April 17, 2020 Author Share #8 Posted April 17, 2020 No I didn't until you suggested. I've just tried and it works great! Finally got 6.2_24922 working. Can't thank you enough to all of you guys. My next challenge will be 6.2.3. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.