Search the Community

Hello all I am trying to stop banging my head against the wall... I have tried just about everthing. I gave up with the internal Nic so got this card can anyone help me as does not find the nas on the network using find.synology etc what loader etc will work with 6.2 Thank you in advance regards Mike

Hi all. Please do help me. I stuck at the very early point for long time already. Thank you all guys in advance. Hardware: HP Gen7 N36L (with mod-bios) HP NC360T NIC (Intel) Bare Metal Environment Software: Jun's loader 1.03b for xs3615 USB grub file has been modified with the VID_PID, SN, Mac1 and Mac2 addresses. Issue: Boot from USB. Screen stays at "Screen will stop updating shortly." (screenshot) Wait 30 minutes. It cannot be discovered in the network. Scanning LAN IPs, using Synology Assistant, or find.synology.com, none of these methods can see my server. Even from the router LAN IP pool, I cannot see any wired node exists. Please, please help. Jerry

Anyone else experienced this? I've got an HP Microserver gen10, an HP NC360T NIC and DSM 6.2.2-24922. Ever since the upgrade from 6.1 to 6.2 the system will drop of off the network about once a week. Sometimes when adding large torrents to the download station (but maybe that's only coincidence). Is there any way to diagnose this? Any system logs besides the Log Center? The only abnormality I'm able to see in the Log Center is that LAN 1 goes down and receives a 169.254.xxx.xxx IP, like the cable was disconnected. It stays like that indefinely.

Bonjour, Ma config actuelle est une installation Barmetal 3615xs - DSM 6.1.7-15284 J'ai acheter une carte HP NC360T dans le but de migré avec le loader 1.03b dans une version de DSM 6.2 La nouvelle carte est bien fonctionnel sous l'installation actuel de DSM Lorsque je lance le loader 1.03b 3615xs ou 3617xs, je ne trouve aucun serveur dans Synology assistant, par contre avec le loader 1.04b pour DS918+ je vois bien le serveur dispo dans Synology assistant mais une fois arrivé dans DSM j'ai un sablier infini lorsque je souhaite voir les interface réseau et les config comme les port DSM etc ne reste pas mémorisé Mes essai on était bien entendu réaliser en ayant retirer les disques en production j'avait juste mis un vieux disque de 1To Si vous avait une idée pour me venir en aide je vous remercie par avance

Hello, I have a HP Gen 8 with DSM 6.2 update 2 installed in a microSD card with the boot loader 1.03b 3617xs Today I have install a new NIC PCIe HP NC360T, and disable the intenal NIC. I have start the Gen 8 and he boot OK and work correctly. So, after reading the post, thinking that the NIC HP NC360T was compatible, I made the upgrade to 6.2.2 directly from the system. Now I cannot enter and I cannot find it with Synology Assistant. Can anybody help me?... I not an expert on this.

i used HP N54L + HP NC360T , upgraded to 6.2.2 24922 , it's working fine in the synology system , but i found that i cant reboot or shutdown , reboot/shutdown is not working when i try to reboot or shutdown , no response from N54L How to solve thie problem ? i had used the modded bios and disable C1E and internal NIC . 1.03b loader + 6.2.2 24922 PAT

Hi to all, To update me DSM to the last system 6.2.2-24922 I bought a Network Card HP NC360T with intel NIC. But when I created the bond (link aggregation) when I upload, download or use the bandwidth of this bond, my DSM crash, the connection is off and restart with the issue message system. First question: How I can find the system log to check where the problem is ? Second Question: I think that the problem come from this card. Because before I use Internal NIC + TpLink Card to create the Bond and I never HAd a problem Thanks a lot.

I have been using my xpenology v 5.x on Baremetal HP Microserver GEN8 for the last 2 years with no problem.... I haven't been able to update the plex app for several months, so I decided to update it to v6.x given ALL the feedback + on DSM update reporting.... I made a complete backup and starting from DSM 5.2-5967 Update9 (latest) and I made the boot key following the tutorial and directly with the DSM DSM 6.2.2 Update 3 (latest) Everything good! Xpenology has been reborn as upgradable. I performed the migration operation successfully (it is also in the logs) Problems begin If I click on the control panel i get the error in attach If clik ok i go on but try to configure the network cards i get the no response for infinite time In DHCP mode all (network share by example) working fine. App not tested i replicate the procedure by replacing the network card with another one of the same type (HP NC360T) and I have also rebuilt, changing the boot key, wit no success Any idea please? Many Thanks in advance.

bonjour a vous tous , qui serait intéressé par des carte résaux HP NC360T 10€ frais d'envoie gratuit payement PayPal entre ami , car je suis sur le point d’acheter plusieurs cela revient moins chère . Contacter MP

as the title states is it possible to update to the latest 6.2.1 using the HP NC360T Dual Port Gigabit NIC PCI-E i know the on board will not work i have a hp proliant n54l microserver 6gb ram 4 x 500gb hdd's 1 x 2tb hdd currently running 6.1.7 update 2

hi can anyone tell me dose the HP NC360T Dual Port Gigabit NIC PCI-E work with xpenology and is it compatible with the lastest dsm 6.2.1 update plz ??

Hallo, wollte mal meinem Server ( Juni 1.02b mit DSM 6.16 ) was gutes tun und hab mir eine NC360T geholt. Davor mit der onboard Nic hat der server noch funktioniert... Eingebaut und DSM startet nicht mehr Da dachte ich, ok hab vergessen die mac Adresse einzutragen... Live linux USB erstellt, Server gestartet und MAC Adressen von der neuen Karte abgeschrieben... Die grub.cfg editiert mit den neuen MAC Adresse... Der onboard nic ist immer noch MAC1... Dann mit Synology Assistent Server gesucht und er findet nix Einer eine Idee? Mit freundlichen Grüßen EDIT: Es lag an C1E der CPU, warum auch immer hatte ich ein BIOS reset und hatte vergessen es wieder aus zu schalten