Trantor

I pleased to help Yes this fix will of course included in v1.4. Modifying /etc/rc is a way to autoload module, I will update the ramdrive to load the mpt2sas module at boot. Your fix in /etc.defaults/synoinfo is very great I'm waiting synology to release proper sources to compil and repack the 4.2 and/or maybe 4.3 (beta).....

Using Ubuntu Desktop 13.04 x64 Live CD, the LSI card is detected and all drives are showing. [attachment=0]all drives showing.png[/attachment] dmesg [ 4.741139] mpt2sas version 14.100.00.00 loaded [ 4.744295] ahci 0000:00:1f.2: version 3.0 [ 4.744353] ahci 0000:00:1f.2: irq 49 for MSI/MSI-X [ 4.744711] scsi0 : Fusion MPT SAS Host [ 4.753556] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (8088124 kB) [ 4.753627] mpt2sas 0000:01:00.0: irq 50 for MSI/MSI-X [ 4.753649] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 50 [ 4.753651] mpt2sas0: iomem(0x00000000bfe40000), mapped(0xffffc90000c70000), size(16384) [ 4.753653] mpt2sas0: ioport(0x000000000000d000), size(256) [ 4.759325] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 4.759330] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 4.759335] ahci 0000:00:1f.2: setting latency timer to 64 [ 4.799610] scsi1 : ahci [ 4.799664] scsi2 : ahci [ 4.799728] scsi3 : ahci [ 4.799777] scsi4 : ahci [ 4.799814] scsi5 : ahci [ 4.799857] scsi6 : ahci [ 4.799884] ata1: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05100 irq 49 [ 4.799887] ata2: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05180 irq 49 [ 4.799890] ata3: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05200 irq 49 [ 4.799892] ata4: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05280 irq 49 [ 4.799895] ata5: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05300 irq 49 [ 4.799898] ata6: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05380 irq 49 [ 4.800419] [drm] Memory usable by graphics device = 2048M [ 4.800424] i915 0000:00:02.0: setting latency timer to 64 [ 4.830898] e1000e 0000:03:00.0 eth0: (PCI Express:2.5GT/s:Width x1) cc:52:af:ea:7d:f0 [ 4.830901] e1000e 0000:03:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.830986] e1000e 0000:03:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 4.831006] e1000e 0000:04:00.0: Disabling ASPM L0s L1 [ 4.831019] i915 0000:00:02.0: irq 51 for MSI/MSI-X [ 4.831039] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.831040] [drm] Driver supports precise vblank timestamp query. [ 4.831074] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.831173] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.831280] e1000e 0000:04:00.0: irq 52 for MSI/MSI-X [ 4.831284] e1000e 0000:04:00.0: irq 53 for MSI/MSI-X [ 4.831288] e1000e 0000:04:00.0: irq 54 for MSI/MSI-X [ 4.938741] e1000e 0000:04:00.0 eth1: (PCI Express:2.5GT/s:Width x1) cc:52:af:ea:7d:f1 [ 4.938745] e1000e 0000:04:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 4.938830] e1000e 0000:04:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 4.938842] e1000e 0000:05:00.0: Disabling ASPM L0s L1 [ 4.938999] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.939107] e1000e 0000:05:00.0: irq 55 for MSI/MSI-X [ 4.939112] e1000e 0000:05:00.0: irq 56 for MSI/MSI-X [ 4.939116] e1000e 0000:05:00.0: irq 57 for MSI/MSI-X [ 4.958950] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.998863] mpt2sas0: sending message unit reset !! [ 5.006848] mpt2sas0: message unit reset: SUCCESS [ 5.046495] e1000e 0000:05:00.0 eth2: (PCI Express:2.5GT/s:Width x1) cc:52:af:ea:7d:f2 [ 5.046498] e1000e 0000:05:00.0 eth2: Intel(R) PRO/1000 Network Connection [ 5.046582] e1000e 0000:05:00.0 eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.046589] e1000e 0000:06:00.0: Disabling ASPM L0s L1 [ 5.046729] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.046855] e1000e 0000:06:00.0: irq 58 for MSI/MSI-X [ 5.046860] e1000e 0000:06:00.0: irq 59 for MSI/MSI-X [ 5.046864] e1000e 0000:06:00.0: irq 60 for MSI/MSI-X [ 5.091120] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 5.091125] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.091416] hub 1-1:1.0: USB hub found [ 5.091452] hub 1-1:1.0: 6 ports detected [ 5.118646] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.118681] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.122617] ata6: SATA link down (SStatus 0 SControl 300) [ 5.122646] ata5: SATA link down (SStatus 0 SControl 300) [ 5.123611] ata3.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133 [ 5.123619] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.123648] ata4.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133 [ 5.123651] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.126638] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.128599] ata3.00: configured for UDMA/133 [ 5.128632] ata4.00: configured for UDMA/133 [ 5.130271] ata1.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133 [ 5.130276] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.133751] ata1.00: configured for UDMA/133 [ 5.133964] scsi 1:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5 [ 5.134100] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5.134102] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 5.134131] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 5.134194] sd 1:0:0:0: [sda] Write Protect is off [ 5.134197] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.134230] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.138613] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.143074] ata2.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133 [ 5.143079] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.147050] ata2.00: configured for UDMA/133 [ 5.147237] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5 [ 5.147349] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 5.147398] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5.147431] sd 2:0:0:0: [sdb] Write Protect is off [ 5.147433] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.147437] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5 [ 5.147448] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.147522] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 5.147600] scsi 4:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5 [ 5.147680] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 5.147734] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5.147772] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5.147780] sd 4:0:0:0: [sdd] Write Protect is off [ 5.147782] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 5.147812] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.147846] sd 3:0:0:0: [sdc] Write Protect is off [ 5.147848] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.147861] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.152107] sda: sda1 sda2 sda3 [ 5.152328] sd 1:0:0:0: [sda] Attached SCSI disk [ 5.154586] e1000e 0000:06:00.0 eth3: (PCI Express:2.5GT/s:Width x1) cc:52:af:ea:7d:f3 [ 5.154589] e1000e 0000:06:00.0 eth3: Intel(R) PRO/1000 Network Connection [ 5.154674] e1000e 0000:06:00.0 eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.160714] mpt2sas0: Allocated physical memory: size(7418 kB) [ 5.160718] mpt2sas0: Current Controller Queue Depth(3307), Max Controller Queue Depth(3432) [ 5.160719] mpt2sas0: Scatter Gather Elements per IO(128) [ 5.163274] sdb: sdb1 sdb2 sdb3 [ 5.163556] sd 2:0:0:0: [sdb] Attached SCSI disk [ 5.167781] sdd: sdd1 sdd2 sdd3 [ 5.167965] sd 4:0:0:0: [sdd] Attached SCSI disk [ 5.173215] sdc: sdc1 sdc2 sdc3 [ 5.173507] sd 3:0:0:0: [sdc] Attached SCSI disk [ 5.195562] fbcon: inteldrmfb (fb0) is primary device [ 5.202461] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.334501] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 5.334503] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.334795] hub 2-1:1.0: USB hub found [ 5.334894] hub 2-1:1.0: 8 ports detected [ 5.382571] mpt2sas0: LSISAS2008: FWVersion(15.00.00.00), ChipRevision(0x03), BiosVersion(07.29.00.00) [ 5.382575] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ) [ 5.382693] mpt2sas0: sending port enable !! [ 5.385798] mpt2sas0: host_add: handle(0x0001), sas_addr(0x500605b0054c2de0), phys(8) [ 5.398096] mpt2sas0: port enable: SUCCESS [ 5.405868] scsi 0:0:0:0: Direct-Access ATA WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6 [ 5.405873] scsi 0:0:0:0: SATA: handle(0x000c), sas_addr(0x4433221103000000), phy(3), device_name(0x50014ee6ab2ae67a) [ 5.405875] scsi 0:0:0:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(0) [ 5.405957] scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 5.405960] scsi 0:0:0:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) [ 5.406234] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 5.413463] scsi 0:0:1:0: Direct-Access ATA WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6 [ 5.413467] scsi 0:0:1:0: SATA: handle(0x0009), sas_addr(0x4433221100000000), phy(0), device_name(0x50014ee2afb8054b) [ 5.413468] scsi 0:0:1:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(3) [ 5.413601] scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 5.413604] scsi 0:0:1:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) [ 5.420496] scsi 0:0:2:0: Direct-Access ATA WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6 [ 5.420500] scsi 0:0:2:0: SATA: handle(0x000a), sas_addr(0x4433221101000000), phy(1), device_name(0x50014ee2056f08ca) [ 5.420501] scsi 0:0:2:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(2) [ 5.420635] scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 5.420638] scsi 0:0:2:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) [ 5.421543] Console: switching to colour frame buffer device 210x65 [ 5.424991] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.424992] i915 0000:00:02.0: registered panic notifier [ 5.425007] i915: No ACPI video bus found [ 5.425031] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 5.428575] scsi 0:0:3:0: Direct-Access ATA WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6 [ 5.428586] scsi 0:0:3:0: SATA: handle(0x000b), sas_addr(0x4433221102000000), phy(2), device_name(0x50014ee057d83700) [ 5.428589] scsi 0:0:3:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(1) [ 5.428678] scsi 0:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 5.428683] scsi 0:0:3:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) [ 5.435570] scsi 0:0:4:0: Direct-Access ATA WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6 [ 5.435578] scsi 0:0:4:0: SATA: handle(0x000d), sas_addr(0x4433221104000000), phy(4), device_name(0x50014ee25ac3b0b4) [ 5.435581] scsi 0:0:4:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(7) [ 5.435674] scsi 0:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 5.435678] scsi 0:0:4:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) [ 5.443732] scsi 0:0:5:0: Direct-Access ATA WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6 [ 5.443738] scsi 0:0:5:0: SATA: handle(0x000e), sas_addr(0x4433221105000000), phy(5), device_name(0x50014ee057d83553) [ 5.443741] scsi 0:0:5:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(6) [ 5.443825] scsi 0:0:5:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 5.443829] scsi 0:0:5:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) [ 5.451962] scsi 0:0:6:0: Direct-Access ATA WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6 [ 5.451973] scsi 0:0:6:0: SATA: handle(0x000f), sas_addr(0x4433221106000000), phy(6), device_name(0x50014ee2055057a8) [ 5.451976] scsi 0:0:6:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(5) [ 5.452081] scsi 0:0:6:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 5.452085] scsi 0:0:6:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) [ 5.460384] scsi 0:0:7:0: Direct-Access ATA WDC WD20EARS-00M AB51 PQ: 0 ANSI: 6 [ 5.460392] scsi 0:0:7:0: SATA: handle(0x0010), sas_addr(0x4433221107000000), phy(7), device_name(0x50014ee600aa4694) [ 5.460395] scsi 0:0:7:0: SATA: enclosure_logical_id(0x500605b0054c2de0), slot(4) [ 5.460517] scsi 0:0:7:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 5.460523] scsi 0:0:7:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1) [ 5.460806] sd 0:0:0:0: Attached scsi generic sg4 type 0 [ 5.460935] sd 0:0:1:0: Attached scsi generic sg5 type 0 [ 5.461103] sd 0:0:2:0: Attached scsi generic sg6 type 0 [ 5.461223] sd 0:0:3:0: Attached scsi generic sg7 type 0 [ 5.461336] sd 0:0:4:0: Attached scsi generic sg8 type 0 [ 5.461440] sd 0:0:5:0: Attached scsi generic sg9 type 0 [ 5.461563] sd 0:0:6:0: Attached scsi generic sg10 type 0 [ 5.461664] sd 0:0:7:0: Attached scsi generic sg11 type 0 [ 5.464482] sd 0:0:2:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5.464528] sd 0:0:1:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5.464617] sd 0:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5.464676] sd 0:0:4:0: [sdi] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5.464988] sd 0:0:3:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5.465376] sd 0:0:5:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5.465415] sd 0:0:6:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5.465629] sd 0:0:7:0: [sdl] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5.488696] sd 0:0:4:0: [sdi] Write Protect is off [ 5.488702] sd 0:0:4:0: [sdi] Mode Sense: 7f 00 10 08 [ 5.489349] sd 0:0:2:0: [sdg] Write Protect is off [ 5.489352] sd 0:0:2:0: [sdg] Mode Sense: 7f 00 10 08 [ 5.489957] sd 0:0:0:0: [sde] Write Protect is off [ 5.489961] sd 0:0:0:0: [sde] Mode Sense: 7f 00 10 08 [ 5.490213] sd 0:0:1:0: [sdf] Write Protect is off [ 5.490217] sd 0:0:1:0: [sdf] Mode Sense: 7f 00 10 08 [ 5.490495] sd 0:0:3:0: [sdh] Write Protect is off [ 5.490498] sd 0:0:3:0: [sdh] Mode Sense: 7f 00 10 08 [ 5.490991] sd 0:0:6:0: [sdk] Write Protect is off [ 5.490994] sd 0:0:6:0: [sdk] Mode Sense: 7f 00 10 08 [ 5.491059] sd 0:0:5:0: [sdj] Write Protect is off [ 5.491062] sd 0:0:5:0: [sdj] Mode Sense: 7f 00 10 08 [ 5.491739] sd 0:0:7:0: [sdl] Write Protect is off [ 5.491742] sd 0:0:7:0: [sdl] Mode Sense: 7f 00 10 08 [ 5.495491] sd 0:0:4:0: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.496207] sd 0:0:2:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.497376] sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.497545] sd 0:0:1:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.498837] sd 0:0:3:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.499173] sd 0:0:6:0: [sdk] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.499432] sd 0:0:5:0: [sdj] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.500138] sd 0:0:7:0: [sdl] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 5.506698] usb 1-1.1: New USB device found, idVendor=05ac, idProduct=1006 [ 5.506702] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.506704] usb 1-1.1: Product: Keyboard Hub [ 5.506707] usb 1-1.1: Manufacturer: Apple, Inc. [ 5.506709] usb 1-1.1: SerialNumber: 000000000000 [ 5.506980] hub 1-1.1:1.0: USB hub found [ 5.507044] hub 1-1.1:1.0: 3 ports detected [ 5.530780] sdi: sdi1 sdi2 sdi3 < sdi5 > [ 5.531324] sdg: [ 5.534834] sde: [ 5.535095] sdf: [ 5.537429] sdh: [ 5.537530] sdk: [ 5.537943] sdj: [ 5.538405] sdl: [ 5.566234] sd 0:0:2:0: [sdg] Attached SCSI disk [ 5.566538] sd 0:0:4:0: [sdi] Attached SCSI disk [ 5.571241] sd 0:0:0:0: [sde] Attached SCSI disk [ 5.571561] sd 0:0:1:0: [sdf] Attached SCSI disk [ 5.575067] sd 0:0:3:0: [sdh] Attached SCSI disk [ 5.576302] sd 0:0:6:0: [sdk] Attached SCSI disk [ 5.576679] sd 0:0:5:0: [sdj] Attached SCSI disk [ 5.577120] sd 0:0:7:0: [sdl] Attached SCSI disk [ 5.577756] tsc: Refined TSC clocksource calibration: 2594.107 MHz [ 5.577760] Switching to clocksource tsc [ 5.605874] usb 2-1.4: new high-speed USB device number 3 using ehci-pci [ 5.698683] usb 2-1.4: New USB device found, idVendor=125f, idProduct=312b [ 5.698689] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.698692] usb 2-1.4: Product: ADATA USB Flash Drive [ 5.698694] usb 2-1.4: Manufacturer: ADATA [ 5.698697] usb 2-1.4: SerialNumber: 233071105004006B lsmod Module Size Used by dm_crypt 22820 0 snd_hda_codec_hdmi 36913 1 snd_hda_intel 39619 4 snd_hda_codec 136453 2 snd_hda_codec_hdmi,snd_hda_intel joydev 17377 0 coretemp 13355 0 snd_hwdep 13602 1 snd_hda_codec kvm_intel 132891 0 snd_pcm 97451 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel kvm 443165 1 kvm_intel psmouse 95870 0 mac_hid 13205 0 snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi ghash_clmulni_intel 13259 0 cryptd 20373 1 ghash_clmulni_intel gpio_ich 13476 0 snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq serio_raw 13215 0 dm_multipath 22843 0 snd 68876 17 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device lpc_ich 17061 0 scsi_dh 14843 1 dm_multipath mei 41158 0 parport_pc 28152 0 bnep 18036 2 soundcore 12680 1 snd rfcomm 42641 0 ppdev 17073 0 microcode 22881 0 bluetooth 228619 10 bnep,rfcomm lp 17759 0 parport 46345 3 lp,ppdev,parport_pc squashfs 36522 1 overlayfs 28003 1 nls_utf8 12557 1 isofs 39815 1 dm_raid45 76725 0 xor 17116 1 dm_raid45 dm_mirror 21946 0 dm_region_hash 20820 1 dm_mirror dm_log 18529 3 dm_region_hash,dm_mirror,dm_raid45 hid_logitech_dj 18604 0 hid_apple 13237 0 usbhid 47074 1 hid_logitech_dj hid 101002 3 usbhid,hid_logitech_dj,hid_apple usb_storage 57204 1 i915 600351 3 video 19390 1 i915 ahci 25731 4 libahci 31364 1 ahci i2c_algo_bit 13413 1 i915 mpt2sas 155423 1 drm_kms_helper 49394 1 i915 drm 286313 4 i915,drm_kms_helper e1000e 198787 0 raid_class 13525 1 mpt2sas scsi_transport_sas 40901 1 mpt2sas modinfo mpt2sas ubuntu@ubuntu:~$ modinfo mpt2sas filename: /lib/modules/3.8.0-19-generic/kernel/drivers/scsi/mpt2sas/mpt2sas.ko version: 14.100.00.00 license: GPL description: LSI MPT Fusion SAS 2.0 Device Driver author: LSI Corporation srcversion: 0CDAC54AA3FB6BD11682E57 alias: pci:v00001000d0000007Esv*sd*bc*sc*i* alias: pci:v00001000d0000006Esv*sd*bc*sc*i* alias: pci:v00001000d00000087sv*sd*bc*sc*i* alias: pci:v00001000d00000086sv*sd*bc*sc*i* alias: pci:v00001000d00000085sv*sd*bc*sc*i* alias: pci:v00001000d00000084sv*sd*bc*sc*i* alias: pci:v00001000d00000083sv*sd*bc*sc*i* alias: pci:v00001000d00000082sv*sd*bc*sc*i* alias: pci:v00001000d00000081sv*sd*bc*sc*i* alias: pci:v00001000d00000080sv*sd*bc*sc*i* alias: pci:v00001000d00000065sv*sd*bc*sc*i* alias: pci:v00001000d00000064sv*sd*bc*sc*i* alias: pci:v00001000d00000077sv*sd*bc*sc*i* alias: pci:v00001000d00000076sv*sd*bc*sc*i* alias: pci:v00001000d00000074sv*sd*bc*sc*i* alias: pci:v00001000d00000072sv*sd*bc*sc*i* alias: pci:v00001000d00000070sv*sd*bc*sc*i* depends: scsi_transport_sas,raid_class intree: Y vermagic: 3.8.0-19-generic SMP mod_unload modversions parm: logging_level: bits for enabling additional logging info (default=0) parm: max_sectors:max sectors, range 64 to 32767 default=32767 (ushort) parm: max_lun: max lun, default=16895 (int) parm: diag_buffer_enable: post diag buffers (TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0) (int) parm: prot_mask: host protection capabilities mask, def=7 (int) parm: max_queue_depth: max controller queue depth (int) parm: max_sgl_entries: max sg entries (int) parm: msix_disable: disable msix routed interrupts (default=0) (int) parm: missing_delay: device missing delay , io missing delay (array of int) parm: mpt2sas_fwfault_debug: enable detection of firmware fault and halt firmware - (default=0) parm: disable_discovery: disable discovery (int) Try with this : http://xpenology.trantor.be/mpt2sas-v16.7z Replace zImage on your usb stick with this one and put mpt2sas.ko (latest from LSI website) in /lib/modules/. Reboot and test. (maybe you will need to insmod the module) Waiting your feedback Please Trantor, add also support for LVM mirror. See: viewtopic.php?f=2&t=915#p4291 You only need to add this three modules: dm-mirror.ko, dm-region-hash.ko and dm-log.ko I will include these

LSI drivers are already included (built in the kernel, I think old drivers). I will build latest LSI drivers (like I did for intel network card) as modules in next build. Can you boot your system with livecd like ubuntu and see if all disks are detected (post dmesg, message and/or modinfo) ?

Look from step 11 : viewtopic.php?f=2&t=3

Just little update (I'm very busy at work) for the next update. Two "major" features are in testing stage ^^ - Add command like lspci, modinfo... If you want some please tell me (apt-* / dpkg not planned for now, maybe in future release with complete chroot of latest debian). - Wifi drivers (I'm not a wifi expert, for now I successfully detect/load driver for atheros and realtek card but got error when I "up" the interface: wlan0: link is not ready If someone want beta build to help debugging wireless

Waiting Synology to release proper sources to build 4.2 compatible kernel (3.2.30).... or maybe some 4.3 beta What's driver is loaded at boot (megaraid, mpt2sas) ? Did you sucessfully install DSM on LSI Logical Volume ? Right now I have some issue installing DSM (no disk detected) with my LSI 9211-4i (mpt2sas). Investigating in progress ^^

I think you shouldn't. On my two test machines I never have issue with this....

Repack v1.3a include this

Update repack to v1.3a (with fixed libcrypto by andy). Available on first post.

I think you talking about package center working ? Ok I will repack the v1.3 with this fix

I have no way to test it now but Andy you rock ! What did you patch/modify in this ?

Hum I hope this will be gone with crypto fix... What's exactly your hardware (mainboard, network adapter...) ? What's the network configuration in DSM (static or dhcp) and did you use DDNS service ? It's seem DSM can't resolve gateway / external IP : synonet: net_default_gateway_set.c:36 failed to set default gateway 192.168.1.1 (256). net_external_ip_get.c(27) : Failed to get external IP by /usr/syno/sbin/ddnsd, WEXITSTATUS®=139

Version 1.3 available on first page

- if I open Package Center and check the "Available" tab, I get an error message saying "Connection failed. Please check your network settings.". I don`t have this problem with 4.2.3202 & 4.2.3211 - so I must manually install Package - in Stationdownload, under settings, tab BT Search - I dont see any search engine plugin , if I want to add (serch.dlm) it, it does not working. Here are some errors from log messages: Jul 10 19:49:44 synonet: net_default_gateway_set.c:36 failed to set default gateway 192.168.1.1 (256). Jul 10 20:12:40 initdata.cgi: net_external_ip_get.c(27) : Failed to get external IP by /usr/syno/sbin/ddnsd, WEXITSTATUS®=139 Jul 10 20:14:11 PkgSynoMan.cgi: PkgSynoMan.cpp:887 No available path Jul 10 20:12:54 network.cgi: common_setting.cpp:353 set dns failed [0x0D00] I did add two network card ... to test it, but the problems are still there ... https://dl.dropboxusercontent.com/u/34829066/Synology/Slike/IMG_0890.JPG After some investigation I found something in kernel config about crypto. From the beginning we compil crypto stack as built-in. But on official syno this is built as modules. This is why we see all insmod errors about crypto... I need to start from scratch with config file to be able to build crypto as module @herbyesk : I need to test with my LSI SAS controller. Maybe some firmware issue

Hi, I feel that the answer is NO! I explain: You can schedule by software a shutdown on a specific time. You can configure your BIOS to boot at specific time. But, you need to create a software that changes your bios values to set the new boot time. This is a hard work! Workaround: Configure your XPEnology to Wake-On-Lan, and use your router (with OpenWRT or another custom distribution) to wakeup your XPEnology at specific time. TN. I just test it on my Zotac box, shutdown and start work but I loose BIOS config

It's appear that ubuntu use the exact same driver but as module and not built-in the kernel. I see in message log when you put your card in : insmod: can't insert '/lib/modules/synobios.ko': File exists this is why the system is shutdowning/restarting but why Did your machine boot ok the first time (no dsm installed) with your controller card plug-in without no disk on it ? @interested : any issue to report ? Like we see in logs, there are lot of crypts errors... I will look to fix all of these shortly

Yes if you please give me logs files. Test with ubuntu livecd if your controller is detected and look what module and version is loaded. I will include wireless support in my next update (atheros, realtek, intel, ralink...)

Yes I agree. Schedule for v1.3 ^^

No wireless support is "yet" included in this build, but I can update it and include wireless drivers. If someone want specific driver please let me know

Si je ne dit pas de bétise, les modules compilés sont en version 3.2.11 au lieu de 3.2.30 ? Il me semble que dans les début j'ai testé, le kernel compil bien mais impossible de faire une build 4.2 complète à cause des modules incompatibles (surtout le synobios.ko qui fait tout planter). Ca s'installait bien mais reboot/shutdown au bout de quelques minutes. Dans la mesure ou la béta du DSM 4.3 est dispo sur le diste de syno, les sources ne vont plus tarder

J'ai trouvé ca / I found this: http://www.webupd8.org/2009/12/convert- ... rtual.html

Hi, This is done for AX88179 in DSM 4.2 x64: http://xpenology.com/forum/viewtopic.php?f=2&t=928#p4431 not the sil3114 but yeah, thanks Test with my repack: viewtopic.php?f=2&t=937 Sil chips are supported (SATA_SIL24 and SATA_SIL drivers built in kernel) @stanza : LSI Logic MegaRAID SAS RAID / SATA, MPT2SAS are also included

Only two PATA drivers is included in this kernel: SiS PATA AMD/NVidia PATA If you want more, just tell me

Nouveau repack v1.2 dispo : viewtopic.php?f=2&t=937 Correction de bugs liés aux ports USB et quelques bricoles

Give a try with my repack, it include LSI SAS / RAID support viewtopic.php?f=2&t=937