Jump to content
XPEnology Community

WiteWulf

Contributor
 View Profile  See their activity

  • Posts

    423

  • Joined

  • Last visited

  • Days Won

    25

 Content Type 

Posts posted by WiteWulf

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted

    1 minute ago, psychoboi32 said:

    @WiteWulf you own g8 hp server I want to ask can i get serial output on my ilo v4 web console that will be huge help for me thanks

    No, you only get textcons on the web interface.

     

    For serial output you need to ssh into the iLO and run 'vsp'

     

    I can't remember if you need a full iLO license for this or not, but it's worth having anyway and you can get them for ~£10 on eBay.

    Am I Restricted In How Many NICs I Can Add To A System?

    in Answered Questions

    Posted · Edited by WiteWulf

    15 hours ago, flyride said:

    DS918+ has internal synoinfo.cfg parameter maxlanport which is defaulted to 2 ports.  You can change it but it will get overwritten on DSM upgrade, so be careful it doesn't disable your LAN because you didn't think about it.

    FYI, even with maxlanports=4 and the interfaces all declared in grub.cfg, NICs 3 and 4 (eth2 and eth3) didn't appear in Control Panel until I ssh'd in and ran 'ifconfig eth2 up', for example. Once I'd done that it always failed to create the bond using the web ui, so I used synonet instead and that worked fine. Then rebooted to check it persisted between reboots and it's all good.

    Am I Restricted In How Many NICs I Can Add To A System?

    in Answered Questions

    Posted · Edited by WiteWulf

    Even after going through the steps above and making eth2 "visible" to DSM, it fails to add it to a channel bond with eth1 (it fails silently with no error). it's the channel bond that I'm trying to do this for, fwiw.

     

    I note that the 918+ has two NICs and the 3615xs has four. I may give it another try with a 3615xs image.

     

    More info:

     

    What I'm actually trying to do here is set up a dedicated direct connection between this VM and a physical QNAP box using two GigE ports at each end, channel bonded, with a private IP on each, to do very fast NFS transfers over a dedicated link with no other traffic. I figure I could either:

     

    - pass through the PCI NICs on the ESXi host to the guest (along with the existing vNIC that has the systems services bind to it) and configure them as a bond

     

    - create a vSwitch on ESXi with these two NICs configured as uplinks and attach a vmxnet3 interface to the guest on this switch

     

    I thought the first option would be simpler, but it's not looking that way now

    Am I Restricted In How Many NICs I Can Add To A System?

    in Answered Questions

    Posted

    Is there a restriction on how many NICs I can add to a system based on how many the hardware I'm emulating (ie. DS918+ or DS3615xs) has?

     

    I've tried adding two additional NICs to a 918+ VM on ESXi, using PCI passthrough. This is in addition to an existing vNIC using e1000e driver. The existing vNIC is still there, the first PCI NIC shows up, but not the second. If I ssh in, though, I can see all three NICs using "ip a", although eth2 is "down"

     

    Issuing "ifconfig eth2 up" then brings the NIC up *and* it's now visible in the DSM Control Panel 🤔

     

    NB, all three NICs are declared in grub.cfg as mac1, mac2, mac3

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted

    1 hour ago, psychoboi32 said:

    Hello guys, with the help of @Orphée and @Comic Chang's repo , @pocopico driver I wrote a script which gives you Redpill image please change VID/PID/Mac/Serial no. accordingly

    I tried in Linux VM
     

    GUIDE:-

    ```nano takeredpill.sh```
    add your PID/VID/MAC/SN in the beginning of the script
    ```chmod +x takeredpill.sh```
    ```sh takeredpill.sh````

    output folder have image
    ** this is early stage may be error happen don't worry please ping me :)

    takeredpill.shUnavailable

     

    takeredpill.sh 2.04 kB · 16 downloads

     

    Good effort, but be aware that TTG are already planning this functionality for the final release (and maybe beta, too).

     

    If you read nothing else from the past in this thread, at least read TTG's posts. They give a *lot* of detail about where the project is heading and should help reduce duplication of effort 👍

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted

    3 minutes ago, scoobdriver said:

     

    LOL not sure what your use case is .. most my devices direct play content, so I very rarely need to transcode (and the G8 Xeon handled that cpu transcoding ok) I only really set up the HW transcoding 918 VM as an experiment,

     

    Yeah, this was mostly as an experiment just to see if it would work :)

     

    I share Plex libraries with a few work colleagues. My TVs are both 4k HDR capable, so I never do any transcoding (and keep the 4k content in a separate library so ppl without capable eqpt don't play it by accident), but some folk watch on laptops and 720p TVs, so transcoding is often used for 1080p content. It's currently running on a QNAP TS-853A which does hardware transcoding with a GPU (it needs it as the Celeron CPU in it is rubbish!), but I figure moving it off onto this new system will be faster, and I'll just use the QNAP for storage (as it has a 12TB SATA array in it).

     

    Quote

    and incase I ever needed to use it whilst traveling and had bad internet connection . It maps my media content on the main HP microserver . I also use it as hyperback and snapshot replication target for the HP MS . It runs in ESXi on a tiny micro form factor optiplex , its very low power consumption cpu 35w so no big deal keeping it running 

     

    I'm hoping to do similar with hyperback. I had a quick play last night backing up my home server to the new ESXi host at work and it was very fast and easy.

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted

    I assume they used threads as opposed to cores in the table to cover hyperthreading CPUs. As I'm provisioning vCPUs in ESXi it makes no difference. I've assigned 8 cores/1 socket and it's making use of all 8 "CPUs" for Plex transcoding.

     

    Now I wonder where we're at with hardware transcoding for Plex? I've never bothered looking into it before as my main hardware (HP Gen8) isn't capable...

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted

    12 hours ago, WiteWulf said:

    Thanks for helping me get up and running with ESXi, folks. I spent most of the evening upgrading from 6.5 to 7.0 (damn VIB dependencies!) but once that was out of the way the DSM installation was pretty smooth. The only problem I had was that the network it's on has no DHCP (for reasons), so I had to get the virtual terminal working so I could go in and manually give it an IP address, netmask and gateway to even be able to get at the web interface. Now it's up and running! 👍

     

    It's got a 918+ image on it at the moment, given that I've got loads of CPUs and RAM in this host: is 918+ the best image for it? I'm hoping to eventually use this as a Plex host, so CPU, disk and network throughout will be important.

    image.png.e713b581b5c14dc37a897333804a0a14.thumb.png.94c4daeea539bc965e6d17e419866d7b.png

     

    Am I right in thinking that the above table means both 918+ and 3615xs images will only make use of up to 8 cores, and that only the 3617xs image (which isn't available for redpill) will support 16?

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted · Edited by WiteWulf

    6 minutes ago, scoobdriver said:

    is there a fork that support DS3615XS 7.0.1-42218 loader ? 

    You can build it with Haydib's docker scripts by adding the relevant details to the config json file. NB. TTG don't support 42218, so this is pulling from jumkey's repo and you won't be able to use extensions with this. This is what I'm using on my system.

      

    {
            "id": "bromolow-7.0.1-42218",
            "platform_version": "bromolow-7.0.1-42218",
            "user_config_json": "bromolow_user_config.json",
            "docker_base_image": "debian:8-slim",
            "compile_with": "toolkit_dev",
            "redpill_lkm_make_target": "dev-v7",
            "downloads": {
                "kernel": {
                    "url": "https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/bromolow-source/linux-3.10.x.txz/download",
                    "sha256": "18aecead760526d652a731121d5b8eae5d6e45087efede0da057413af0b489ed"
                },
                "toolkit_dev": {
                    "url": "https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.bromolow-7.0.dev.txz/download",
                    "sha256": "a5fbc3019ae8787988c2e64191549bfc665a5a9a4cdddb5ee44c10a48ff96cdd"
                }
            },
            "redpill_lkm": {
                "source_url": "https://github.com/RedPill-TTG/redpill-lkm.git",
                "branch": "master"
            },
            "redpill_load": {
                "source_url": "https://github.com/jumkey/redpill-load.git",
                "branch": "develop"
            }
        },

     

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted

    Thanks for helping me get up and running with ESXi, folks. I spent most of the evening upgrading from 6.5 to 7.0 (damn VIB dependencies!) but once that was out of the way the DSM installation was pretty smooth. The only problem I had was that the network it's on has no DHCP (for reasons), so I had to get the virtual terminal working so I could go in and manually give it an IP address, netmask and gateway to even be able to get at the web interface. Now it's up and running! 👍

     

    It's got a 918+ image on it at the moment, given that I've got loads of CPUs and RAM in this host: is 918+ the best image for it? I'm hoping to eventually use this as a Plex host, so CPU, disk and network throughout will be important.

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted

    1 minute ago, DaveD said:

    I am currently running an HP Gen8 Microserver 16gb memory and E3-1265L V2 currently running as a baremetal XPenology server with Plex Server as the only app curently installed so is bare metal - ESXi or Proxmox the way I should be looking to go now with the new loader and V7 + versions ?

     

    I have the exact same hardware configuration and Plex would frequently kernel panic on redpill loader. It's being worked on, but I'd stay on 6.2.3 for now unless you like living dangerously :)

×
×
  • Create New...