phone guy
-
Posts
398 -
Joined
-
Last visited
-
Days Won
3
Posts posted by phone guy
-
-
7 hours ago, flyride said:
It does - I had no unusual issues installing with ESXi. Console does cut off as you state. If you are using KVM/q35 and a single virtual disk, configure the virtual disk to SATA, and try SataPortMap=11 and DiskIdxMap=1000. Also, the disk needs to be AT LEAST 21GB for the post-installation to complete and still create a shared folder.
Still failed. I removed the scsi emu hdd, added 2 sata emu hdd as sata 1 and 2, q35 system, kvm64 host type, tried 42218 since I am able to see serial console, these are the results.
Spoiler[ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '115200n8') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] e820: last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5b50-0x000f5b5f] mapped at [ffff8800000f5b50] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672 [ 0.000000] BRK [0x01a6e000, 0x01a6efff] PGTABLE [ 0.000000] BRK [0x01a6f000, 0x01a6ffff] PGTABLE [ 0.000000] BRK [0x01a70000, 0x01a70fff] PGTABLE [ 0.000000] BRK [0x01a71000, 0x01a71fff] PGTABLE [ 0.000000] BRK [0x01a72000, 0x01a72fff] PGTABLE [ 0.000000] log_buf_len: 33554432 bytes [ 0.000000] early log buf free: 127688(97%) [ 0.000000] RAMDISK: [mem 0x35b1f000-0x36d86fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F5960 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000007FFE4B47 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000007FFE485D 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000007FFDF040 00581D (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x000000007FFDF000 000040 [ 0.000000] ACPI: APIC 0x000000007FFE4951 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 0x000000007FFE49E1 0000CA (v01 BOCHS VMGENID 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x000000007FFE4AAB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: MCFG 0x000000007FFE4AE3 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: WAET 0x000000007FFE4B1F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000017fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ffd4fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] [ 0.000000] On node 0 totalpages: 1048435 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8128 pages used for memmap [ 0.000000] DMA32 zone: 520149 pages, LIFO batch:31 [ 0.000000] Normal zone: 8192 pages used for memmap [ 0.000000] Normal zone: 524288 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ffd5000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xafffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88017dc00000 s95192 r8192 d31784 u524288 [ 0.000000] pcpu-alloc: s95192 r8192 d31784 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1032029 [ 0.000000] Kernel command line: BOOT_IMAGE=/zImage withefi earlyprintk syno_hw_version=DVA3221 console=ttyS0,115200n8 netif_num=4 pid=0x0001 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac1=00113209F284 sn=2040SJRKK291H vid=0x46f4 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=0002 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=22 [ 0.000000] Synology Hardware Version: DVA3221 [ 0.000000] Internal netif num: 4 [ 0.000000] Mac1: 00113209F284 [ 0.000000] Serial Number: 2040SJRKK291H [ 0.000000] Disk Index Map: 0002 [ 0.000000] SYNO GPIO hdd detect pin: 0 [ 0.000000] Vender format version: 2 [ 0.000000] Power on seq num: 0 [ 0.000000] Sata Port Map: 22 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3992960K/4193740K available (5554K kernel code, 857K rwdata, 1720K rodata, 924K init, 668K bss, 200780K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:456 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] bootconsole [uart0] disabled [ 0.000000] bootconsole [uart0] disabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3500.119 MHz processor [ 0.003004] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.23 BogoMIPS (lpj=3500119) [ 0.005009] pid_max: default: 32768 minimum: 301 [ 0.005681] ACPI: Core revision 20150930 [ 0.008203] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.009063] Security Framework initialized [ 0.009672] AppArmor: AppArmor initialized [ 0.010008] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.011004] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.012230] Initializing cgroup subsys io [ 0.013010] Initializing cgroup subsys memory [ 0.013652] Initializing cgroup subsys devices [ 0.014011] Initializing cgroup subsys freezer [ 0.015051] CPU: Physical Processor ID: 0 [ 0.015636] CPU: Processor Core ID: 0 [ 0.016074] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.017003] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.018007] Speculative Store Bypass: Vulnerable [ 0.020317] Freeing SMP alternatives memory: 24K [ 0.021400] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.024000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.034000] smpboot: CPU0: Intel Common KVM processor (family: 0xf, model: 0x6, stepping: 0x1) [ 0.034242] smpboot: native_smp_prepare_cpus: this boot have memory training fail, last reason is 0x00 [ 0.035027] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.037218] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.038002] NMI watchdog: Shutting down hard lockup detector on all cpus [ 0.039076] x86: Booting SMP configuration: [ 0.040003] .... node #0, CPUs: #1 #2 #3 [ 0.078022] x86: Booted up 1 node, 4 CPUs [ 0.079003] smpboot: Total of 4 processors activated (28000.95 BogoMIPS) [ 0.080411] devtmpfs: initialized [ 0.081239] invalid opcode: 0000 [#1] SMP [ 0.081746] Modules linked in: [ 0.082000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.180+ #42218 [ 0.082000] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 0.082000] task: ffff880179118000 ti: ffff880179120000 task.ti: ffff880179120000 [ 0.082000] RIP: 0010:[<ffffffff812fb867>] [<ffffffff812fb867>] sha_transform+0x37/0x1290 [ 0.082000] RSP: 0000:ffff880179123ce8 EFLAGS: 00010803 [ 0.082000] RAX: 0000000045321f1a RBX: 00000000c3d2e1f0 RCX: 0000000000000020 [ 0.082000] RDX: ffff880179123d40 RSI: ffffffff81a60860 RDI: ffff880179123d28 [ 0.082000] RBP: ffff880179123d10 R08: 0000000067452301 R09: 0000000010325476 [ 0.082000] R10: 0000000098badcfe R11: 00000000efcdab89 R12: 00000000e8a4602c [ 0.082000] R13: ffff880179123dde R14: ffffffff81897308 R15: ffffffff818972c0 [ 0.082000] FS: 0000000000000000(0000) GS:ffff88017dc00000(0000) knlGS:0000000000000000 [ 0.082000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.082000] CR2: ffff88017ffff000 CR3: 000000000180a000 CR4: 00000000000006f0 [ 0.082000] Stack: [ 0.082000] 0000000000000010 ffff880179123d40 ffff880179123dde ffffffff81897308 [ 0.082000] ffffffff818972c0 ffff880179123da8 ffffffff813aeb2f 0000000000000246 [ 0.082000] efcdab8967452301 1032547698badcfe 00000000c3d2e1f0 0000000000000010 [ 0.082000] Call Trace: [ 0.082000] [<ffffffff813aeb2f>] extract_buf+0x8f/0x110 [ 0.082000] [<ffffffff813ae655>] ? account.part.28+0x125/0x190 [ 0.082000] [<ffffffff813aec31>] extract_entropy+0x81/0x210 [ 0.082000] [<ffffffff814b2b7e>] ? setup_net+0x3e/0x140 [ 0.082000] [<ffffffff818f07eb>] ? initcall_blacklist+0xaa/0xaa [ 0.082000] [<ffffffff813af086>] get_random_bytes+0x36/0x90 [ 0.082000] [<ffffffff814b2b7e>] setup_net+0x3e/0x140 [ 0.082000] [<ffffffff81933c9a>] ? net_defaults_init+0x24/0x24 [ 0.082000] [<ffffffff81933d39>] net_ns_init+0x9f/0x134 [ 0.082000] [<ffffffff810003b8>] do_one_initcall+0x88/0x1a0 [ 0.082000] [<ffffffff818f0ff8>] kernel_init_freeable+0x15e/0x1f1 [ 0.082000] [<ffffffff81562d80>] ? rest_init+0x80/0x80 [ 0.082000] [<ffffffff81562d89>] kernel_init+0x9/0xd0 [ 0.082000] [<ffffffff8156882f>] ret_from_fork+0x3f/0x80 [ 0.082000] [<ffffffff81562d80>] ? rest_init+0x80/0x80 [ 0.082000] Code: 44 89 d0 41 57 44 8b 07 44 8b 5f 04 41 56 44 31 c8 41 55 44 21 d8 41 54 45 8d 20 44 31 c8 41 c1 c4 05 53 44 01 e0 8b 5f 10 01 d8 <0f> 38 f0 0e 05 99 79 82 5a 89 0a 41 c1 cb 02 01 c1 41 8d 02 0f [ 0.082000] RIP [<ffffffff812fb867>] sha_transform+0x37/0x1290 [ 0.082000] RSP <ffff880179123ce8>
-
- Outcome of the update: SUCCESSFUL
- DSM version prior update: NONE - fresh install
- Loader version and model: redpill.v0.4.6.img DS3622xs+ DSM 7.1.0-42661u1
- Using custom extra.lzma: NO (added ext drivers manually)
- Installation type: VM Proxmox v7.2: cpu: E3-1270v2 mobo: SuperMicro X9-SCM-F
- Additional comments: Successful as Q35 and i440fx system. PCIe/PCI Pass Thru LSI HBA controller (Dell H710 flashed IT MODE ver P20) using ext MPT3SAS. Paravirtual nic using ext V9FS. ACPI working using ext https://raw.githubusercontent.com/dodo-dk/rp-ext/main/acpid/rpext-index.json
-
5 hours ago, flyride said:
It does - I had no unusual issues installing with ESXi. Console does cut off as you state. If you are using KVM/q35 and a single virtual disk, configure the virtual disk to SATA, and try SataPortMap=11 and DiskIdxMap=1000. Also, the disk needs to be AT LEAST 21GB for the post-installation to complete and still create a shared folder.
I tried so many things yesterday... q35, i440fx, changing cpu type from default kvm64 all the way to host (e3-1270v2), 2 cores, 4 cores, 2gb ram, 8gb ram, nothing worked. emu hdd was set to scsi and 50gb, I will try later on with virtual sata and those port mappings and report back later.
-
@pocopico there seems to be an issue with the v9fs drivers and ds918 (42218 and 42661). it gives a recipe error when adding that ext and building the loader. someone has that issue in the proxmox thread. just letting you know.
-
1
-
-
4 hours ago, luutuananh said:
When I try to build redpill in tinycore, there is some error on v9fs
[-] Recipe file for extension pocopico.v9fs platform ds918p_42218 is logically invalid - recipe defines kmod virtio_blk.ko *FILE* which doesn't exist after all files entries are processed. You SHOULD contact the extension packer to report that (see below)
[#] ========================================== pocopico.v9fs ==========================================
[#] Extension name: v9fs
[#] Description: Adds Support
[#] To get help visit: <todo>
[#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/v9fs
[#] Software author: https://github.com/pocopico
[#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/v9fs/rpext-index.json
[#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621
[#] =======================================================================================[#] Downloading remote file https://github.com/RedPill-TTG/redpill-boot-wait/raw/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json
#################################################################################################### 100.0%
[#] Filling-in newly downloaded recipe for extension redpill-boot-wait platform ds918p_42218
[#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds918p_42218/boot-wait.sh
#################################################################################################### 100.0%
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds918p_42218/boot-wait.sh file... [OK]
[#] Successfully processed recipe for extension redpill-boot-wait platform ds918p_42218
[#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds918p_42218/boot-wait.sh file... [OK]
[#] Updating extensions... [OK]
[#] PAT file /home/tc/redpill-load/cache/ds918p_42218.pat not found - downloading from https://global.download.synology.com/download/DSM/release/7.0.1/42218/DSM_DS918%2B_42218.pat
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 338M 100 338M 0 0 22.5M 0 0:00:15 0:00:15 --:--:-- 22.0M
[#] Verifying /home/tc/redpill-load/cache/ds918p_42218.pat file... [OK]
[#] Unpacking /home/tc/redpill-load/cache/ds918p_42218.pat file to /home/tc/redpill-load/build/1653058377/pat-ds918p_42218-unpacked... [OK]
[#] Verifying /home/tc/redpill-load/build/1653058377/pat-ds918p_42218-unpacked/zImage file... [OK]
[#] Patching /home/tc/redpill-load/build/1653058377/pat-ds918p_42218-unpacked/zImage to /home/tc/redpill-load/build/1653058377/zImage-patched... [OK]
[#] Verifying /home/tc/redpill-load/build/1653058377/pat-ds918p_42218-unpacked/rd.gz file... [OK]
[#] Unpacking /home/tc/redpill-load/build/1653058377/pat-ds918p_42218-unpacked/rd.gz file to /home/tc/redpill-load/build/1653058377/rd-ds918p_42218-unpacked... [OK]
[#] Apply patches to /home/tc/redpill-load/build/1653058377/rd-ds918p_42218-unpacked... [OK]
[#] Patching config files in ramdisk... [OK]
[#] Adding OS config patching... [OK]
[#] Repacking ramdisk to /home/tc/redpill-load/build/1653058377/rd-patched-ds918p_42218.gz... [OK]
[#] Bundling extensions... [#] Checking runtime for required tools... [OK]
[#] Dumping ds918p_42218 platform extensions to /home/tc/redpill-load/build/1653058377/custom-initrd/exts...
[!] Failed to dump extension pocopico.v9fs for platform ds918p_42218 as its recipe file cannot be retrieved. Isn't the extension misspelled or not supported on that platform?*** Process will exit ***
[!] Failed to dump all extensions for ds918p_42218 platform to /home/tc/redpill-load/build/1653058377/custom-initrd/exts - see errors above
*** Process will exit ***
The command I use to build is here:
./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS918+ ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/v9fs/rpext-index.json ./rploader.sh build apollolake-7.0.1-42218
@pocopico I was able to duplicate this error, something is wrong when adding v9fs for apollolake 42218 and 42661, gives a recipe error.
@luutuananh until @pocopico fixes the issue with the v9fs drivers, use the virtio drivers and you will have success.. I just tested them myself and both 42218 and 42661 build successfully.
To build DS918+ DSM 7.0.1-42218
./rploader.sh clean now ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS918+ ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/redpill-load/master/redpill-virtio/rpext-index.json ./rploader.sh build apollolake-7.0.1-42218To build DS918+ DSM 7.1.0-42661u1
./rploader.sh clean now ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS918+ ./rploader.sh identifyusb now ./rploader.sh satamap now ./rploader.sh ext apollolake-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/redpill-load/master/redpill-virtio/rpext-index.json ./rploader.sh build apollolake-7.1.0-42661Remember to install dsm using .pat downloaded directly from synology.com for your platform (ds918+)
-
1
-
-
36 minutes ago, pocopico said:
You are getting a KP. did you try with 42661 ?
Yes, with 42661 the console no longer displays booting process as shown here
Loading Linux... Loading initramfs... Starting kernel with USB bootSo I have no way to know how far the booting process got before it died...but again, because of how instantly proxmox is quitting that vm instances, I know its locked in kernel panic. ??????
Anything else I can try? Seems to work with ESXi ???
-
1 hour ago, ideasman69 said:
Thanks for all your testing and results @flyride. From previous experience with proxmox, I'm going to stick with the q35 option and just deal with the drive numbering offset.
q35 should be picked when passing through PCIe devices, but each to their own of course
From the research, the only difference is a slight performance hit of about 25%. I am not saying thats not important, but could you elaborate as to why stick with q35?
-
8 minutes ago, pocopico said:
try 42218
It downloaded the 42118 pat, but this is as far as the booting goes, having the serial console opened while booted in tiny core, then clicking reset to boot the loader...
This is a loader with only these commands
./rploader.sh ext denverton-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/v9fs/rpext-index.json ./rploader.sh build denverton-7.0.1-42218Resulting in this from the console... obviously its hung here.
SpoilerLoading Linux... Loading initramfs... Starting kernel with USB boot [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.180+ (root@build18) (gcc version 7.5.0 (GCC) ) #42218 SMP Mon Oct 18 19:26:24 CST 2021 [ 0.000000] Command line: BOOT_IMAGE=/zImage withefi earlyprintk syno_hw_version=DVA3221 console=ttyS0,115200n8 netif_num=4 pid=0x0001 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac1=001132306AA2 sn=20C0SJRE9KXPY vid=0x46f4 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffddfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bffde000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '115200n8') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] e820: last_pfn = 0xbffde max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5b70-0x000f5b7f] mapped at [ffff8800000f5b70] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672 [ 0.000000] BRK [0x01a6e000, 0x01a6efff] PGTABLE [ 0.000000] BRK [0x01a6f000, 0x01a6ffff] PGTABLE [ 0.000000] BRK [0x01a70000, 0x01a70fff] PGTABLE [ 0.000000] BRK [0x01a71000, 0x01a71fff] PGTABLE [ 0.000000] log_buf_len: 33554432 bytes [ 0.000000] early log buf free: 127900(97%) [ 0.000000] RAMDISK: [mem 0x35b1f000-0x36d86fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F5970 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x00000000BFFE1EA6 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x00000000BFFE1C88 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x00000000BFFDF040 002C48 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x00000000BFFDF000 000040 [ 0.000000] ACPI: APIC 0x00000000BFFE1CFC 000080 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 0x00000000BFFE1D7C 0000CA (v01 BOCHS VMGENID 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x00000000BFFE1E46 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: WAET 0x00000000BFFE1E7E 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bffddfff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.000000] On node 0 totalpages: 1048444 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12224 pages used for memmap [ 0.000000] DMA32 zone: 782302 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbffde000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88013dc00000 s95192 r8192 d31784 u1048576 [ 0.000000] pcpu-alloc: s95192 r8192 d31784 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1032038 [ 0.000000] Kernel command line: BOOT_IMAGE=/zImage withefi earlyprintk syno_hw_version=DVA3221 console=ttyS0,115200n8 netif_num=4 pid=0x0001 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac1=001132306AA2 sn=20C0SJRE9KXPY vid=0x46f4 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=1 [ 0.000000] Synology Hardware Version: DVA3221 [ 0.000000] Internal netif num: 4 [ 0.000000] Mac1: 001132306AA2 [ 0.000000] Serial Number: 20C0SJRE9KXPY [ 0.000000] Disk Index Map: 00 [ 0.000000] SYNO GPIO hdd detect pin: 0 [ 0.000000] Vender format version: 2 [ 0.000000] Power on seq num: 0 [ 0.000000] Sata Port Map: 1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3993280K/4193776K available (5554K kernel code, 857K rwdata, 1720K rodata, 924K init, 668K bss, 200496K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 [ 0.000000] NR_IRQS:4352 nr_irqs:440 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] bootconsole [uart0] disabled [ 0.000000] bootconsole [uart0] disabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3499.950 MHz processor [ 0.003004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6999.90 BogoMIPS (lpj=3499950) [ 0.004436] pid_max: default: 32768 minimum: 301 [ 0.005006] ACPI: Core revision 20150930 [ 0.007278] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.008064] Security Framework initialized [ 0.008743] AppArmor: AppArmor initialized [ 0.009008] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.010004] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.011254] Initializing cgroup subsys io [ 0.012021] Initializing cgroup subsys memory [ 0.013014] Initializing cgroup subsys devices [ 0.013700] Initializing cgroup subsys freezer [ 0.014060] CPU: Physical Processor ID: 0 [ 0.015003] CPU: Processor Core ID: 0 [ 0.015634] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.016003] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.017007] Speculative Store Bypass: Vulnerable [ 0.019973] Freeing SMP alternatives memory: 24K [ 0.021106] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.023831] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.034000] smpboot: CPU0: Intel Common KVM processor (family: 0xf, model: 0x6, stepping: 0x1) [ 0.034297] smpboot: native_smp_prepare_cpus: this boot have memory training fail, last reason is 0x00 [ 0.035034] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.037219] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.038001] NMI watchdog: Shutting down hard lockup detector on all cpus [ 0.039074] x86: Booting SMP configuration: [ 0.040002] .... node #0, CPUs: #1 [ 0.053033] x86: Booted up 1 node, 2 CPUs [ 0.054002] smpboot: Total of 2 processors activated (13999.80 BogoMIPS) [ 0.055398] devtmpfs: initialized [ 0.056230] invalid opcode: 0000 [#1] SMP [ 0.056839] Modules linked in: [ 0.057000] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.4.180+ #42218 [ 0.057000] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 0.059006] task: ffff8801390f8000 ti: ffff880139100000 task.ti: ffff880139100000 [ 0.059006] RIP: 0010:[<ffffffff812fb867>] [<ffffffff812fb867>] sha_transform+0x37/0x1290 [ 0.059006] RSP: 0000:ffff880139103ce8 EFLAGS: 00010803 [ 0.059006] RAX: 0000000045321f1a RBX: 00000000c3d2e1f0 RCX: 0000000000000020 [ 0.059006] RDX: ffff880139103d40 RSI: ffffffff81a60860 RDI: ffff880139103d28 [ 0.059006] RBP: ffff880139103d10 R08: 0000000067452301 R09: 0000000010325476 [ 0.059006] R10: 0000000098badcfe R11: 00000000efcdab89 R12: 00000000e8a4602c [ 0.059006] R13: ffff880139103dde R14: ffffffff81897308 R15: ffffffff818972c0 [ 0.059006] FS: 0000000000000000(0000) GS:ffff88013dd00000(0000) knlGS:0000000000000000 [ 0.059006] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.059006] CR2: 0000000000000000 CR3: 000000000180a000 CR4: 00000000000006f0 [ 0.059006] Stack: [ 0.059006] 0000000000000010 ffff880139103d40 ffff880139103dde ffffffff81897308 [ 0.059006] ffffffff818972c0 ffff880139103da8 ffffffff813aeb2f 0000000000000246 [ 0.059006] efcdab8967452301 1032547698badcfe 00000000c3d2e1f0 0000000000000010 [ 0.059006] Call Trace: [ 0.059006] [<ffffffff813aeb2f>] extract_buf+0x8f/0x110 [ 0.059006] [<ffffffff813ae655>] ? account.part.28+0x125/0x190 [ 0.059006] [<ffffffff813aec31>] extract_entropy+0x81/0x210 [ 0.059006] [<ffffffff814b2b7e>] ? setup_net+0x3e/0x140 [ 0.059006] [<ffffffff818f07eb>] ? initcall_blacklist+0xaa/0xaa [ 0.059006] [<ffffffff813af086>] get_random_bytes+0x36/0x90 [ 0.059006] [<ffffffff814b2b7e>] setup_net+0x3e/0x140 [ 0.059006] [<ffffffff81933c9a>] ? net_defaults_init+0x24/0x24 [ 0.059006] [<ffffffff81933d39>] net_ns_init+0x9f/0x134 [ 0.059006] [<ffffffff810003b8>] do_one_initcall+0x88/0x1a0 [ 0.059006] [<ffffffff818f0ff8>] kernel_init_freeable+0x15e/0x1f1 [ 0.059006] [<ffffffff81562d80>] ? rest_init+0x80/0x80 [ 0.059006] [<ffffffff81562d89>] kernel_init+0x9/0xd0 [ 0.059006] [<ffffffff8156882f>] ret_from_fork+0x3f/0x80 [ 0.059006] [<ffffffff81562d80>] ? rest_init+0x80/0x80 [ 0.059006] Code: 44 89 d0 41 57 44 8b 07 44 8b 5f 04 41 56 44 31 c8 41 55 44 21 d8 41 54 45 8d 20 44 31 c8 41 c1 c4 05 53 44 01 e0 8b 5f 10 01 d8 <0f> 38 f0 0e 05 99 79 82 5a 89 0a 41 c1 cb 02 01 c1 41 8d 02 0f [ 0.059006] RIP [<ffffffff812fb867>] sha_transform+0x37/0x1290 [ 0.059006] RSP <ffff880139103ce8>
Tried again with system set as q35 same results.
SpoilerBooting `RedPill DVA3221 v7.0.1-42218 Beta (USB, Verbose)' Loading Linux... Loading initramfs... Starting kernel with USB boot [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.180+ (root@build18) (gcc version 7.5.0 (GCC) ) #42218 SMP Mon Oct 18 19:26:24 CST 2021 [ 0.000000] Command line: BOOT_IMAGE=/zImage withefi earlyprintk syno_hw_version=DVA3221 console=ttyS0,115200n8 netif_num=4 pid=0x0001 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac1=001132306AA2 sn=20C0SJRE9KXPY vid=0x46f4 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd4fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd5000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '115200n8') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] e820: last_pfn = 0x7ffd5 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5b50-0x000f5b5f] mapped at [ffff8800000f5b50] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672 [ 0.000000] BRK [0x01a6e000, 0x01a6efff] PGTABLE [ 0.000000] BRK [0x01a6f000, 0x01a6ffff] PGTABLE [ 0.000000] BRK [0x01a70000, 0x01a70fff] PGTABLE [ 0.000000] BRK [0x01a71000, 0x01a71fff] PGTABLE [ 0.000000] BRK [0x01a72000, 0x01a72fff] PGTABLE [ 0.000000] log_buf_len: 33554432 bytes [ 0.000000] early log buf free: 127692(97%) [ 0.000000] RAMDISK: [mem 0x35b1f000-0x36d86fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F5960 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000007FFE4A8B 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000007FFE47B1 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000007FFDF040 005771 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x000000007FFDF000 000040 [ 0.000000] ACPI: APIC 0x000000007FFE48A5 000080 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 0x000000007FFE4925 0000CA (v01 BOCHS VMGENID 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x000000007FFE49EF 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: MCFG 0x000000007FFE4A27 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: WAET 0x000000007FFE4A63 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000017fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ffd4fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] [ 0.000000] On node 0 totalpages: 1048435 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8128 pages used for memmap [ 0.000000] DMA32 zone: 520149 pages, LIFO batch:31 [ 0.000000] Normal zone: 8192 pages used for memmap [ 0.000000] Normal zone: 524288 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ffd5000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xafffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88017dc00000 s95192 r8192 d31784 u1048576 [ 0.000000] pcpu-alloc: s95192 r8192 d31784 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1032029 [ 0.000000] Kernel command line: BOOT_IMAGE=/zImage withefi earlyprintk syno_hw_version=DVA3221 console=ttyS0,115200n8 netif_num=4 pid=0x0001 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac1=001132306AA2 sn=20C0SJRE9KXPY vid=0x46f4 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=1 [ 0.000000] Synology Hardware Version: DVA3221 [ 0.000000] Internal netif num: 4 [ 0.000000] Mac1: 001132306AA2 [ 0.000000] Serial Number: 20C0SJRE9KXPY [ 0.000000] Disk Index Map: 00 [ 0.000000] SYNO GPIO hdd detect pin: 0 [ 0.000000] Vender format version: 2 [ 0.000000] Power on seq num: 0 [ 0.000000] Sata Port Map: 1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3993224K/4193740K available (5554K kernel code, 857K rwdata, 1720K rodata, 924K init, 668K bss, 200516K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 [ 0.000000] NR_IRQS:4352 nr_irqs:440 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] bootconsole [uart0] disabled [ 0.000000] bootconsole [uart0] disabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3500.080 MHz processor [ 0.003004] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.16 BogoMIPS (lpj=3500080) [ 0.005006] pid_max: default: 32768 minimum: 301 [ 0.006007] ACPI: Core revision 20150930 [ 0.008526] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.009065] Security Framework initialized [ 0.010017] AppArmor: AppArmor initialized [ 0.011008] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.012004] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.013219] Initializing cgroup subsys io [ 0.014010] Initializing cgroup subsys memory [ 0.015016] Initializing cgroup subsys devices [ 0.016010] Initializing cgroup subsys freezer [ 0.017047] CPU: Physical Processor ID: 0 [ 0.018003] CPU: Processor Core ID: 0 [ 0.018733] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.019003] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.020007] Speculative Store Bypass: Vulnerable [ 0.023168] Freeing SMP alternatives memory: 24K [ 0.024389] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.027296] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.038000] smpboot: CPU0: Intel Common KVM processor (family: 0xf, model: 0x6, stepping: 0x1) [ 0.038298] smpboot: native_smp_prepare_cpus: this boot have memory training fail, last reason is 0x00 [ 0.039025] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.041176] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.042002] NMI watchdog: Shutting down hard lockup detector on all cpus [ 0.043062] x86: Booting SMP configuration: [ 0.044002] .... node #0, CPUs: #1 [ 0.057024] x86: Booted up 1 node, 2 CPUs [ 0.058002] smpboot: Total of 2 processors activated (14000.32 BogoMIPS) [ 0.059348] devtmpfs: initialized [ 0.060204] invalid opcode: 0000 [#1] SMP [ 0.060918] Modules linked in: [ 0.061000] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.4.180+ #42218 [ 0.061000] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 0.061000] task: ffff880179118000 ti: ffff880179120000 task.ti: ffff880179120000 [ 0.061000] RIP: 0010:[<ffffffff812fb867>] [<ffffffff812fb867>] sha_transform+0x37/0x1290 [ 0.061000] RSP: 0000:ffff880179123ce8 EFLAGS: 00010803 [ 0.061000] RAX: 0000000045321f1a RBX: 00000000c3d2e1f0 RCX: 0000000000000020 [ 0.061000] RDX: ffff880179123d40 RSI: ffffffff81a60860 RDI: ffff880179123d28 [ 0.061000] RBP: ffff880179123d10 R08: 0000000067452301 R09: 0000000010325476 [ 0.061000] R10: 0000000098badcfe R11: 00000000efcdab89 R12: 00000000e8a4602c [ 0.061000] R13: ffff880179123dde R14: ffffffff81897308 R15: ffffffff818972c0 [ 0.061000] FS: 0000000000000000(0000) GS:ffff88017dd00000(0000) knlGS:0000000000000000 [ 0.061000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.061000] CR2: 0000000000000000 CR3: 000000000180a000 CR4: 00000000000006f0 [ 0.061000] Stack: [ 0.061000] 0000000000000010 ffff880179123d40 ffff880179123dde ffffffff81897308 [ 0.061000] ffffffff818972c0 ffff880179123da8 ffffffff813aeb2f 0000000000000246 [ 0.061000] efcdab8967452301 1032547698badcfe 00000000c3d2e1f0 0000000000000010 [ 0.061000] Call Trace: [ 0.061000] [<ffffffff813aeb2f>] extract_buf+0x8f/0x110 [ 0.061000] [<ffffffff813ae655>] ? account.part.28+0x125/0x190 [ 0.061000] [<ffffffff813aec31>] extract_entropy+0x81/0x210 [ 0.061000] [<ffffffff814b2b7e>] ? setup_net+0x3e/0x140 [ 0.061000] [<ffffffff818f07eb>] ? initcall_blacklist+0xaa/0xaa [ 0.061000] [<ffffffff813af086>] get_random_bytes+0x36/0x90 [ 0.061000] [<ffffffff814b2b7e>] setup_net+0x3e/0x140 [ 0.061000] [<ffffffff81933c9a>] ? net_defaults_init+0x24/0x24 [ 0.061000] [<ffffffff81933d39>] net_ns_init+0x9f/0x134 [ 0.061000] [<ffffffff810003b8>] do_one_initcall+0x88/0x1a0 [ 0.061000] [<ffffffff818f0ff8>] kernel_init_freeable+0x15e/0x1f1 [ 0.061000] [<ffffffff81562d80>] ? rest_init+0x80/0x80 [ 0.061000] [<ffffffff81562d89>] kernel_init+0x9/0xd0 [ 0.061000] [<ffffffff8156882f>] ret_from_fork+0x3f/0x80 [ 0.061000] [<ffffffff81562d80>] ? rest_init+0x80/0x80 [ 0.061000] Code: 44 89 d0 41 57 44 8b 07 44 8b 5f 04 41 56 44 31 c8 41 55 44 21 d8 41 54 45 8d 20 44 31 c8 41 c1 c4 05 53 44 01 e0 8b 5f 10 01 d8 <0f> 38 f0 0e 05 99 79 82 5a 89 0a 41 c1 cb 02 01 c1 41 8d 02 0f [ 0.061000] RIP [<ffffffff812fb867>] sha_transform+0x37/0x1290 [ 0.061000] RSP <ffff880179123ce8>
Any suggestions?
-
1 minute ago, pocopico said:
I Just fixed the typo in the URL and pushed the changes to GH.
should I try the 42661 or the 42218 ?
-
I have tried all nic adapters available in proxmox. virtio, e1000, r8139, vmware ... no connection.
I have added ext for each except the r8139 as I did not find a link to it on @pocopicogit hub, but the builder auto added it https://github.com/pocopico/rp-ext/tree/main/8139cp
Still no connection, and based on how quickly proxmox shutsdown the vm, I am assuming it crashed (kernel panic?) somewhere because it closes the vm almost instantly, where other vms take several seconds to close.
I tried to build 7.0.1 42218 and got this error
######################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/dva3221_42218/boot-wait.sh file... [OK] [#] Successfully processed recipe for extension redpill-boot-wait platform dva3221_42218 [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/dva3221_42218/boot-wait.sh file... [OK] [#] Updating extensions... [OK] [#] PAT file /home/tc/redpill-load/cache/dva3221_42218.pat not found - downloading from https://global.synology.com/download/DSM/release/7.0.1/42218/DSM_DVA3221_42218.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: global.synology.com [#] Verifying /home/tc/redpill-load/cache/dva3221_42218.pat file... /usr/local/bin/sha256sum: /home/tc/redpill-load/cache/dva3221_42218.pat: No such file or directory [ERR] [-] Failed to generate checksum for file [#] Verifying /home/tc/redpill-load/cache/dva3221_42218.pat file... [ERR] [!] Checksum mismatch - expected 01f101d7b310c857e54b0177068fb7250ff722dc9fa2472b1a48607ba40897ee but computed *** Process will exit *** FAILED : Loader creation failed check the output for any errors tc@box:~$All update and fullupgrade were run, so this is latest 0715 shell with whatever updates get pulled down during those commands. I am officially stuck.
-
After several failed attempts, I am at loss for words. This has been the first platform to give me pains while trying to build.
I am using proxmox, like the tutorial in my signature... I have build the loader but can not connect to it, so I assumed it was a nic driver. I have tried v9fs
./rploader.sh ext denverton-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/v9fs/rpext-index.jsonBut no connection.
I then tried virtio
./rploader.sh ext denverton-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/redpill-load/master/redpill-virtio/rpext-index.jsonand got this error
Spoiler######################################################################################################################################################### 100.0% [#] Extension redpill-misc for dva3221_42661 platform is already up to date [-] The extension thethorgroup.virtio was found. However, the extension index has no recipe for dva3221_42661 platform. It may not be [-] supported on that platform, or author didn't updated it for that platform yet. You can try running [-] "ext-manager.sh update" to refresh indexes for all extensions manually. Below are the currently known information about [-] the extension stored locally: [#] ========================================== thethorgroup.virtio ========================================== [#] Extension name: VirtIO [#] Description: Adds VirtIO support for fast network/PCI/SCSI/network/console paravirtualization under QEmu (Proxmox, VirtualBox, virsh, and similar) [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-virtio [#] Software author: https://www.linux-kvm.org/page/Virtio [#] Update URL: https://github.com/pocopico/redpill-load/raw/develop/redpill-virtio/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 ds3615xs_42661 ds3622xsp_42661 ds2422p_42661 ds3622xsp_42218 ds2422p_42218 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3622xsp_42550 ds3615xs_25556 ds920p_42218 ds920p_42621 ds920p_42550 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= [-] Failed to update recipe for thethorgroup.virtio extension for platform dva3221_42661. The script will terminate as you do not [-] have previously downloaded recipe which can be used if download fails. Try again later. If problem [-] persists contact the extension packer for support (displayed below) [#] ========================================== thethorgroup.virtio ========================================== [#] Extension name: VirtIO [#] Description: Adds VirtIO support for fast network/PCI/SCSI/network/console paravirtualization under QEmu (Proxmox, VirtualBox, virsh, and similar) [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/RedPill-TTG/redpill-virtio [#] Software author: https://www.linux-kvm.org/page/Virtio [#] Update URL: https://github.com/pocopico/redpill-load/raw/develop/redpill-virtio/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 ds3615xs_42661 ds3622xsp_42661 ds2422p_42661 ds3622xsp_42218 ds2422p_42218 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3622xsp_42550 ds3615xs_25556 ds920p_42218 ds920p_42621 ds920p_42550 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= [!] Cannot continue due to previous errors (see above) *** Process will exit *** [!] Failed to update all extensions for dva3221_42661 platform - see errors above *** Process will exit *** FAILED : Loader creation failed check the output for any errors tc@box:~$
This was only to be proof of concept kind of thing, since I dont have the graphics card or cameras for that matter to utilize this, but for some reason this build doesnt like me.
And since @pocopico told me the serial output doesnt work, I have no clue how far the vm is actually getting during boot.
-
Just to complete the test, I edited the first (main) VM from q35 to i440fx, and tried to spin it up - it gave me an error, due to the pci pass thru. So I removed the pci card from its hardware profile, and added it again (no pcie checkbox) and it powered right up with disks on the HBA starting at slot #1... So good to go!
I did not re-build its loader, so NO change to its user_config.json which read like this:
"SataPortMap": "1", "DiskIdxMap": "00" -
I agree, but since you did the research, I figured I would ask. Thanks again.
-
I tried to built a DVA3221 vm, and it wouldn't boot up, I am guessing it suffered a kernel panic somewhere, but without serial console to monitor I could not see or tell. I tried a few times without success, adding only the v9fs drivers for the virtio nic. Not sure why it doesnt like proxmox? I had no problems with 918/3622
-
3 minutes ago, flyride said:
There are a lot of posts on the topic. I found this post that seems to answer my question. I'll amend my first post to indicate that passthrough system performance is a differentiator.
According to that link, q35 seems to use less cpu power vs i440fx, not sure how to test that especially for a dsm install? I can tell you that when building the loader under the i440fx system, when running the ./rploader.sh satamap now command, it detected only the hba (albeit with no drives) and wanted to default to 0 connected drives, I choose 8 and enter. the resulting user_config.json entry looked like this
"SataPortMap": "8", "DiskIdxMap": "00"And on powerup, dsm just loaded right up... of course it still had my previous installation still intact.
Are there any tests I can run to compare performance? or any tests you would like any results from?
-
6 minutes ago, flyride said:
Are you passing through the entire HBA or are you mapping the HBA drives into the VirtIO controller? I was under the impression that a PCIe device passthrough wasn't functional since there is no PCIe bus in i440fx.
I powered down my other dsm vm, created a new vm as i440fx, pci pass thru the entire card to the i440fx vm (and you are correct, the pci checkbox is greyed out) so I rebuild the loader using the user_config.json from the first vm, powered it up and boom! Disk in slot 1.
So I am actually passing the entire card. I am not sure how to check if anything is or is not working?
-
Since I am unable to edit the first post, I will add this here.
With many thanks to user @flyride who graciously looked into an issue I was having, using an LSI HBA card in pci pass thru mode for my HDDs, but aways populating the DSM system in lower slots (for me it was slot #9 or slot #2 depending on the sataportmap), he discovered that by choosing system i440fx instead of Q35 fixed this issue.
His thread is located here:
As I mention in that post, I am not sure what advantages or disadvantages choosing i440fx vs Q35 have? But if you experience slot population issues, use i440fx as the system type and not Q35. The rest of the procedure remains the same.
-
2
-
-
First many thanks go out to @flyride for taking the time to investigate this mysterious problem, it seems using system type i440fx is the better choice, in the sense it does eliminate the first slot gap. And allows a pci pass thru HBA controller to start populating drives in slot #1.
I am not sure if there are any other benefits or concerns using i440fx vs Q35 as system type?
-
3 hours ago, naan said:
Exactly, I have an old device with DSM 6.2.3 that is very stable and functional enough to use.
Recently I'm trying to install 6.2.4 using tinycore-redpill instead of Jun's Loader and I always have problems.
Could you please explain the difference between the SataportMap parameters of Jun Loader and RedPill? Maybe I have set this wrong. I am installing DSM in ESXi and put loader image at SATA 0:0 and pass-through physics SATA controller. So I set before are "SataPortMap": "19", "DiskIdxMap": "1000" to be able to hide the boot disk. But not work with RedPill.
While I was still debugging continuously, I found that the recent update of tinycore-redpill removed the support of 6.2.4. So is there an easy way to get the 6.2.4 loader now, other than manually compiling it myself?Thanks.
While I understand your concern and appreciate you want to stick with dsm6.x.x, I do not know what advantage you will get going from what has been described as a rock solid 6.2.3 to 6.2.4.... thats the issue here. To me, and probably to others, why bother? If you are going to go thru the hassle of building a new loader and deal with whatever learning curve will be involved for you, what makes 6.2.4 so special over 6.2.3.... I mean at that point, learn to use redpill, @Peter Suh has a great thread and guide, and jump on the newest DSM and its benefits. If you are stuck on 6.2.3 because of package you like, or usb devices which were removed in DSM7 - again, we all get that... but using Jun loader and dsm6.2.3 is relatively easy and you seem to have it working... I personally don't see why even bother with a minimal jump (more like a slight side step) to 6.2.4.
My advice is if you are going to learn to use redpill, like we all are, jump to dsm7.1 and enjoy. Once you get the hang of it, it's not difficult. And this community is very active so help is usually no more than a day a way, but most scenarios have been covered and can be resolved fairly easily.
Not trying to be rude, just seems like an unusual request at this stage of the game.
-
14 minutes ago, pocopico said:
Did you use virtio_net for network ?
I used your v9fs drivers. should I try virtio ? and specific ones you would like me to try?
rebuilding now with these
./rploader.sh ext denverton-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/redpill-load/master/redpill-virtio/rpext-index.json -
1 minute ago, pocopico said:
I think that q35 should be fine. Right after GRUB you get some kernel messages. Its only after some time that it switches to something else (GPU ?)
I just tried switch q35 to i440fx (the only other system to choose) on i440fx I almost immediately get a red bar showing time out error.
What else can I try?
-
1 minute ago, pocopico said:
Actually i was talking more about the machine emulation.
The problem with the DVA is that you cannot have a serial console. After kernel boots its moving all messages away from tty and this makes it harder to troubleshoot.
I can try again with the i440x, I think thats the other cpu type
-
If I need to switch to ESXi for testing, I can probably put a system together to do that, I have no experience on vmware so bare with me if you want me to test in esxi
-
33 minutes ago, pocopico said:
What is the CPU you used ? some cpu options are known to cause KP
Its in a proxmox vm, but the chip is xeon E3-1270 v2 which has run ds918 and ds3622. Not having much luck with the dva3221
DVA3221 loader development thread
in Developer Discussion Room
Posted
wow! I would have sworn I build a DS918 on this board before, obviously I was wrong! Must have been the i7 4790 box I have? oh well...So it must be 4th gen or newer right? (to be compatible with 918/920/3221)
Man, I just bought all that server hardware to build that proxmox server
<- disappointed.