• Content Count

  • Joined

  • Last visited

Everything posted by jbesclapez

  1. Hi there! Can someone help, I am running latest v6 DSM and I installed deluge from synocommunity. Now I would like to install plugins of delugehttps://dev.deluge-torrent.org/wiki/Plugins#InstallingPlugins How to do that? I tried manual and automatic but can not find a solution. I have install python module and phyton3. Can someone help? Thanks
  2. Thanks Flyride! I am going to continue tomorow as it will take a day at least... Will catch up with you on sunday I think! Have a good week end!
  3. And now it looks even better right?
  4. I clicked repair. Here is how it look now:
  5. By the way, i do not care at all about the DSM settings... only about the data
  6. root@Syno_Main:~# cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md3 : active raid5 sata4p3[0] sata3p3[3] 29284844544 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/2] [U__U] md1 : active raid1 sata3p2[2] sata4p2[3] sata2p2[1] 2097088 blocks [4/3] [_UUU] md0 : active raid1 sata3p1[0] sata4p1[1] 2490176 blocks [4/2] [UU__] unused devices: <none>
  7. Hi Flyride. My favorite solution is the option 2 but I need to be sure I understand. You are telling me to take away the disk 3 and put a new drive instead of the disk 3. Once this is done I need to resync the arrray. How would I do that? Is that simple? Is it within the DSM GUI? Thanks
  8. root@Syno_Main:~# smartctl -x -d sat /dev/sata2 smartctl 6.5 (build date May 7 2020) [x86_64-linux-4.4.59+] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA HDWG11A Serial Number: Z9F0A004FBDG LU WWN Device Id: 5 000039 9d8cb009a Firmware Version: 0603 User Capacity: 10,000,831,348,736 bytes [10.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall]
  9. root@Syno_Main:~# find /dev -name sata1pfind /dev -name sata1p find: paths must precede expression: /dev Usage: find [-H] [-L] [-P] [-Olevel] [-D help|tree|search|stat|rates|opt|exec] [path...] [expression] root@Syno_Main:~# fdisk -l Disk /dev/ram0: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram1: 640 MiB, 671088640 bytes, 1310720 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (
  10. I also moved to root: root@Syno_Main:~# smartctl -x -d sat /dev/sata2p smartctl 6.5 (build date May 7 2020) [x86_64-linux-4.4.59+] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org Smartctl open device: /dev/sata2p [SAT] failed: No such device root@Syno_Main:~# mdadm --examine /dev/sata[1234]p3 | egrep 'Event|/dev/sata' mdadm: cannot open /dev/sata[1234]p3 : No such file or directory
  11. Hey... Flyride! Thanks again for help others. Appreciated! Again Here it is!
  12. Hi there, I got myself a nice DX920 with the worst drives ever : Toshiba N300. I got 3 of them and already have 2 fails. It never happened to me. DO NOT BUY THOSE DRIVES! I end up with a degraded Volume2 and I need you to guide me on how to solve that. It was a volume with 4 drives of 10Tb. Toshiba Drive 3 and 4 are failing. I took off the Drive 4 and put a new Seagate 10Tb and then got scared/worried and I put back the Drive4 Toshiba in. I have a working 10Tb replacement drive but I am unsure of how to process from there. The new drive is not
  13. Hi Bearcat, Yes I did OPEN the drive and moved an head. The other drive is not even responding. Maybe a board issue. NO idea. I was doing a new back up of the file but could not recover the overall... That is why i decided to open the noisy drive.... I am going to ddrescue the drive on another computer using clonezilla.... and work on the image...
  14. OMG!!!! It was a RAID1 I all guided you to the wrong thing. I am really sorry. AS you can see on the cat /proc/mdstat (so pissed of with myself) However, by kind of luck i recovered some data. The synobox was sitting on the side of my desk... (you wont believe that) and my cat came in. Then my son came in and scared the cat, who pushed the syno to the ground. The second disks started to make some noise....RRRR.... I opened it... to move back the head of the drive. Now my syno is not making noise but it is discovered as a NOT INSTALLED. However, i can s
  15. Thanks IG-88 (again, and again I opened the box yesterday and could not hear the second disk spinning. I need to investigate on how to make it spin again. The only thing it did was unplug the power cord, while DSM was on...
  16. Hi there, I have an old DS2017+ that is running on DSM3.1 and my volume just crashed. I was using this NAS as a back up of my already broken XPEnology. I need to recover those data. It happened when I unplugged the power cord by accident... Even if i was not writting thinds on the NAS. I do not see the other drive I think... Please help Thanks BackUpStation> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md2 : active raid1 sdb5[1](E) 385977472 blocks super 1.2 [2/1] [_E] md1 : act
  17. Hello Flyride, It took me some time to do the DD Raw back up of the drives. I had to redo it 2 times!! I also did a back up of the raw image. I also installed a VM machine with Ubuntu on it and I created a shared folder that can access the DD image from Ubuntu. Now I think I am ready to do the e2fsck you mentioned. I was also thinking that, we totally never worked with the 4th drive. We never touched it... maybe we should try something with it? Can you guide me on the e2fsck command like you did before? Thanks
  18. Flyride, I just got myself a 10Tb drive delivered. I am now using Clonezilla to make a raw image of the drives... I think it might take 1 to 2 days. I will keep you posted on this! I cant wait for the week end ;-)
  19. IG-88 and Flyride, I totally agree with both of you guys! First I will clone my drive - I just got myself a 10Tb drive and a USB 3.1 docking sata station. That should do the job right in terms of hardware. I will do some research in the coming days on how to clone my array onto DSK or IMG files. I will then compress those and put them on the 8Tb drive. I will use the 10Tb to do my research/tests. Once again, remember I realised this morning that my most precious data is saved. I am not trying to recover the rest, but if it fails I will be kind of fine - mainly frustrated
  20. Supermounter, what I could do also is to create a VM and put DSM on it and then attach the real disks to it no? However, I will wait for Flyride!
  21. I see things a bit differently. I think I have everything to loose. I think everything can be forecasted and planned. There is no maybe. I was simply really stupid to use the GUI yesterday! And as Flyride said, it should have been avoided if I did not miread/got confused. I am not ready to change anything without having at least a RAW backup of the disks. I am waiting for my guru to reply
  22. Hi Supermounter! With all due respect, I do not really see the point in that as the array is arlready seen by my DSM if you look at the print screens. The filesystem will not recover on its own...
  23. Good morning Flyride! I had a tough night to be honest, I was thinking of my mistake. All this comes from a big misundertanding from my side ! I did some reading like you recommended and I also contacted a FORENSIC to ask for a quote with all the details you gave me. Then I did more reading to see what i could do. Now I need your opinion, as once again, I might misundertand things I was thinking of doing a RAW copy of the drives and then some analysis. I will have to buy a new drive - but anyway I was thinking of upgrading my NAS as it is pretty old, so the d