toshas

В данной теме это оффтоп, но всеже: для 6го обновления к 3827, эти обновленные скрипты являются опасными? Для сборок 4.3 не происходит никакой перезаписи, там же не использовался загрузчик gnoboot/nanoboot Спасибо! storagehandler.rar volumehandler.rar

/usr/syno/synoman/webman/modules/StorageManager/storagehandler.cgi /usr/syno/synoman/webman/modules/StorageManager/volumehandler.cgi Was changed... Is it possible to manual download and apply patches ?

After update xpenology was auto-rebooted and now works fine. There is no any "strange" message. All is as usual. p.s. N54L with Trantor's beta7 (4.3 3827)

According to viewtopic.php?f=2&t=3799 viewtopic.php?f=2&t=3802 there is some strange behaviour of DSM 5.0U4 update. Does anyone tried apply U6 (the same as 5.0U4) to 4.3 3827 build ? Thanks!

Trantor, but your beta7(8) based on 4.3 3827 seems to be secure. It can be updated to Update2 or higher.

Do you know anything about recent OpenSSL bug ? Vulnerability is described here - http://heartbleed.com/ . You can test your nas hare - https://filippo.io/Heartbleed/ . It was fixed in updates for 4.3 and 5.0.

Which version of xpenology do you have (4.2/4.3/5.0, any updates) ?

Thanks, vtrchan! Very cool design.

Hi! You can use sheduled task (custom script/smart check). It is safe. These action only modify /etc/crontab file, you can check it via "vi" command. Do not use sheduled poweroff or wakeup. These requires changing bios parameters and synology bios is not the same as n40/n54 bios, thus you will get reset issue.

Hi! 4.3 patch is already out - http://www.synology.com/en-global/suppo ... 7_update_2 Your beta7 can be upgraded to it without any issues. Where do you been ? We started worry about you.

Hi! Do you use router or firewall ? What kind of ports is open to internet (web/ftp/smb)?

How to schedule a data scrubbing ? Synology has software raid. There is one weak point of soft-raid - data will be checked only during read/write access to this data. So on raid1,raid5 (and even on raid6 in worst case) is possible such situation: 1. one hdd fails 2. hdd replaced by new one 3. synology start data recovery 4. old data on another hdd has bad sector (which wasn't tested in near past) 5. synology marks volume as read-only 6. all data (several TB ?) should be moved to new place with partial data lost. To prevent this situation periodical data scrubbing is strongly recommended. Even in 5.0 beta there is no way to create schedule for this job. http://forum.synology.com/enu/viewtopic.php?t=65340 http://forum.synology.com/enu/viewtopic.php?t=78392 http://forum.synology.com/enu/viewtopic.php?t=23454 http://forum.synology.com/enu/viewtopic.php?t=8926 So the question is: Could someone to share script for periodically checking and repairing raid volume (maybe even with email notifications) ? thanks a lot!

How to schedule a data scrubbing ? Synology has software raid. There is one weak point of soft-raid - data will be checked only during read/write access to this data. So on raid1,raid5 (and even on raid6 in worst case) is possible such situation: 1. one hdd fails 2. hdd replaced by new one 3. synology start data recovery 4. old data on another hdd has bad sector (which wasn't tested in near past) 5. synology marks volume as read-only 6. all data (several TB ?) should be moved to new place with partial data lost. To prevent this situation periodical data scrubbing is strongly recommended. Even in 5.0 beta there is no way to create schedule for this job. http://forum.synology.com/enu/viewtopic.php?t=65340 http://forum.synology.com/enu/viewtopic.php?t=78392 http://forum.synology.com/enu/viewtopic.php?t=23454 http://forum.synology.com/enu/viewtopic.php?t=8926 So the question is: Could someone to share script for periodically checking and repairing raid volume (maybe even with email notifications) ? thanks a lot!

Please remember about power consumption too. N40L has 15w TDP and N54L has 25w TDP. (N40L + 2x2tb WD Green = 31w in hdd hibernation mode) For 24/7 home use it can be important. Just for NAS (w/o torrent, media transcoding and etc.) even N36L is enough (transfer speed is equal).

I user before bays(?) BIOS 41 and it worked, recently I have updated to the latest one from German site and it still works. Do you perform any bios setting modifications? (virtual ram size to 32, sata mode to 3.0gb/s or etc.) Even with default bios settings xpenology works fine! Bios reset is annoying thing by itself.