Orphée Posted February 27, 2023 Author Share #501 Posted February 27, 2023 It seems not. If you card is lower/older than the original GTX1650, you may want to try DVA3219 loader, maybe it will work with your card if it is closer to the GTX1050 from DVA3219. Quote Link to comment Share on other sites More sharing options...
polkue Posted February 27, 2023 Share #502 Posted February 27, 2023 aahhhhI okay i will try Quote Link to comment Share on other sites More sharing options...
polkue Posted February 27, 2023 Share #503 Posted February 27, 2023 Its working whit the 3219 thx 1 Quote Link to comment Share on other sites More sharing options...
jeffestewart Posted February 28, 2023 Share #504 Posted February 28, 2023 Hello, Hoping to get some input on an issue I am having. I have been running a HP MicroServer Gen 9 as a DVA3221 for several months now and it has been running great, I had no issues setting it up. I decided to build a new machine that would accommodate 8 drives and a GPU for AI. I am using the following... Motherboard: Asus H110M-a/m.2 CPU: Core i5-6500t Ram: 16gb (8x2) BIOS: UEFI SATA Card: 8-Port Marvell 9215 / 4-Port Asmedia1062 (I have tested both for troubleshooting. My goal is to use the 8-Port Marvell 9215) Built-in Sata ports have been disabled I am able to update and build through redpill and the unit boots. The problem I am running into is during the install of DiskStation. It gets to the 40/41/42% mark and fails saying the install file is likely corrupt. I am using the .pat file created on the USB drive. Thank you for any input. Quote Link to comment Share on other sites More sharing options...
vortexxx Posted March 20, 2023 Share #505 Posted March 20, 2023 Hi, can you type, what is a cheap way to face recognition? Quote Link to comment Share on other sites More sharing options...
perlrs Posted March 23, 2023 Share #506 Posted March 23, 2023 I cannot get my GTX1650 card to work under proxmox. It says: per@nvr2:/$ nvidia-smi [ 337.204030] NVRM: GPU 0000:00:10.0: RmInitAdapter failed! (0x23:0x56:515) [ 337.204640] NVRM: GPU 0000:00:10.0: rm_init_adapter failed, device minor number 0 [ 337.225286] NVRM: GPU 0000:00:10.0: RmInitAdapter failed! (0x23:0x56:515) [ 337.226250] NVRM: GPU 0000:00:10.0: rm_init_adapter failed, device minor number 0 Unable to determine the device handle for GPU 0000:00:10.0: Unknown Error And to make sure it's not a hardware thing (or that PCI passthrough isn't correct configured in proxmox), i tried to setup a debian 11 vm with the same PCI passthrough setting (on the same host). root@debian-nvidia-test:/home/per# nvidia-smi Thu Mar 23 10:57:25 2023 +-----------------------------------------------------------------------------+ | NVIDIA-SMI 470.161.03 Driver Version: 470.161.03 CUDA Version: 11.4 | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. | | | | MIG M. | |===============================+======================+======================| | 0 NVIDIA GeForce ... On | 00000000:01:00.0 Off | N/A | | 30% 27C P8 4W / 75W | 1MiB / 3911MiB | 0% Default | | | | N/A | +-------------------------------+----------------------+----------------------+ +-----------------------------------------------------------------------------+ | Processes: | | GPU GI CI PID Type Process name GPU Memory | | ID ID Usage | |=============================================================================| | No running processes found | +-----------------------------------------------------------------------------+ It's a Core i3 10105 (has FMA3) with a GTX1650 (not super or anything). I have tried different versions (incl dva3221-7.1.1-42962) and i'm running tinycore 0.9.4.3 DSM works and SS also works (incl. the correct number of licenses), but without nvidia, i'm not going to get AI. Quote Link to comment Share on other sites More sharing options...
SirNoish Posted March 31, 2023 Share #507 Posted March 31, 2023 GTX 1650 DDR6 2 Quote Link to comment Share on other sites More sharing options...
billa786165 Posted April 8, 2023 Share #508 Posted April 8, 2023 Hello everyone. First of all thank you so much for all the effort. I successfully installed dva3221 on proxmox with gpu gtx 1660 super and everything is working. Now my problem is i need help to use Nvidia in jellyfin docker. Show me a guide or path to follow. Any help Will be appreciated. Quote Link to comment Share on other sites More sharing options...
Orphée Posted April 8, 2023 Author Share #509 Posted April 8, 2023 Jellyfin was more a proof of concept than real usage.. I don't remember what I did actually... I suggest you to consider Emby with a bonus Quote Link to comment Share on other sites More sharing options...
billa786165 Posted April 8, 2023 Share #510 Posted April 8, 2023 21 minutes ago, Orphée said: Jellyfin was more a proof of concept than real usage.. I don't remember what I did actually... I suggest you to consider Emby with a bonus Thanks i already have plex with monthly subscription and with official plex app for Synology it is working out of the box. But i really wanted to try it with jellyfin. If you recall what you do. It must help lot of people like me. Quote Link to comment Share on other sites More sharing options...
Orphée Posted April 9, 2023 Author Share #511 Posted April 9, 2023 9 hours ago, billa786165 said: Thanks i already have plex with monthly subscription and with official plex app for Synology it is working out of the box. But i really wanted to try it with jellyfin. If you recall what you do. It must help lot of people like me. You have every step you need here : https://xpenology.com/forum/topic/58499-dva3221-loader-development-thread/?do=findComment&comment=270258 Quote Link to comment Share on other sites More sharing options...
SirNoish Posted April 15, 2023 Share #512 Posted April 15, 2023 Hello again, after all the tests that everyone has done... which low profile and most powerful gpu is 100% compatible with the dva3221? Thanks for all the tests. Quote Link to comment Share on other sites More sharing options...
SirNoish Posted April 15, 2023 Share #513 Posted April 15, 2023 @Orphée@dimakv2014 Have you tried it? I just tried it and unencrypted the apk and pat them without problems. It can be a start for the updated drivers. 1 Quote Link to comment Share on other sites More sharing options...
dimakv2014 Posted April 16, 2023 Share #514 Posted April 16, 2023 6 hours ago, SirNoish said: @Orphée@dimakv2014 Have you tried it? I just tried it and unencrypted the apk and pat them without problems. It can be a start for the updated drivers. If it works for NvidiaLibrary.spk encrypted/unarchived and encrypted/archive then it would be possible to compile newer nvidia driver for current kernel and hopefully it will run on most recent gpu with AI Quote Link to comment Share on other sites More sharing options...
SirNoish Posted April 16, 2023 Share #515 Posted April 16, 2023 12 hours ago, SirNoish said: Hello again, after all the tests that everyone has done... which low profile and most powerful gpu is 100% compatible with the dva3221? Thanks for all the tests. @dimakv2014 And what can you tell me about this? thank you Quote Link to comment Share on other sites More sharing options...
Orphée Posted April 16, 2023 Author Share #516 Posted April 16, 2023 I suggest you buy every card on the market Then do a definitive test of all and report. Or buy a GTX1650 made for DVA3221. 1 Quote Link to comment Share on other sites More sharing options...
rolandas Posted April 17, 2023 Share #517 Posted April 17, 2023 Hi Lads have 2 pcs dell 7020 and 3040 have Quadro P1000, P2000 and GTX1650 4GB DDR5 All Redpill and arpl loaders work fine, and booting without issues, except DVA3219 and DVA3221 with is stuckt booting after ip displayed. Any advice\solution? Quote Link to comment Share on other sites More sharing options...
Orphée Posted April 17, 2023 Author Share #518 Posted April 17, 2023 (edited) Without serial logs, we won't be able to help you. What kind of "All Redpill and arpl loaders work fine" Is DS918+ part of the list working fine ? baremetal or hypervisor ? Edited April 17, 2023 by Orphée Quote Link to comment Share on other sites More sharing options...
SirNoish Posted April 17, 2023 Share #519 Posted April 17, 2023 On 4/16/2023 at 9:41 AM, Orphée said: I suggest you buy every card on the market Then do a definitive test of all and report. Or buy a GTX1650 made for DVA3221. gtx 1650 I already have one working with a dva3221, but I see that it falls short of power with 4 cameras detecting faces and license plates. Quote Link to comment Share on other sites More sharing options...
rolandas Posted April 17, 2023 Share #520 Posted April 17, 2023 1 hour ago, Orphée said: Without serial logs, we won't be able to help you. What kind of "All Redpill and arpl loaders work fine" Is DS918+ part of the list working fine ? baremetal or hypervisor ? DS918, ds920, ds1621 or 22 working, on redpilll loader and on arpl, Also working DVA1622 perfectly on both loader. Have problems only with DVA3221 and DVA3219 Serial generated by loaders. Not sure how to do logs as machines stopping responding after shows IP address Quote Link to comment Share on other sites More sharing options...
Orphée Posted April 17, 2023 Author Share #521 Posted April 17, 2023 Is it baremetal or VM ? try to run it without GPU, it should still run without GPU. There is no reason it does not start, check if lkm is set to PROD Quote Link to comment Share on other sites More sharing options...
Orphée Posted April 17, 2023 Author Share #522 Posted April 17, 2023 18 minutes ago, SirNoish said: gtx 1650 I already have one working with a dva3221, but I see that it falls short of power with 4 cameras detecting faces and license plates. 4 camera : face detection = 4x2 = 8 tasks license plate = 4x2 = 8 tasks total : 16 tasks Expected max for DVA3221 : 12 tasks. 1 1 Quote Link to comment Share on other sites More sharing options...
Orphée Posted April 17, 2023 Author Share #523 Posted April 17, 2023 @SirNoish comment #476 said EVGA RTX 2080 super GDDR6 worked for him. you may try it and see if you have better performances. Quote Link to comment Share on other sites More sharing options...
SirNoish Posted April 17, 2023 Share #524 Posted April 17, 2023 21 minutes ago, Orphée said: @SirNoish comment #476 said EVGA RTX 2080 super GDDR6 worked for him. you may try it and see if you have better performances. I will look for an rtx 2080 to try, to see what differences I have. thank you Quote Link to comment Share on other sites More sharing options...
rolandas Posted April 17, 2023 Share #525 Posted April 17, 2023 (edited) 4 hours ago, Orphée said: Is it baremetal or VM ? try to run it without GPU, it should still run without GPU. There is no reason it does not start, check if lkm is set to PROD bare metal dell 7020 and 3040 i5 6th generation and i5 4th generation tried without graphic as well with no luck I do not see purpose for not booting, boot it is not booting. will try hp z440, will see may be it is dell issues what you mean: check if lkm is set to PROD? Edited April 17, 2023 by rolandas Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.