gnoboot Posted February 16, 2014 Author Share #226 Posted February 16, 2014 You forgot to include the Ethernet controller, pm me instead. BTW, a few users were able to install gnoboot without any issues on hyper-v @nas1.cn . Quote Link to comment Share on other sites More sharing options...
carlchan Posted February 17, 2014 Share #227 Posted February 17, 2014 hi ! Could it be use in virtual box ? I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files. Other then that, it boot and then shuntdown ... Cannot go into the DSM system page ... I also rewrite the alpha7.img, but still fail to boot ... Thanks... Quote Link to comment Share on other sites More sharing options...
carlchan Posted February 17, 2014 Share #228 Posted February 17, 2014 hi ! Could it be use in virtual box ? I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files. Other then that, it boot and then shuntdown ... Cannot go into the DSM system page ... I also rewrite the alpha7.img, but still fail to boot ... Thanks... Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 17, 2014 Author Share #229 Posted February 17, 2014 hi ! Could it be use in virtual box ? I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files. Other then that, it boot and then shuntdown ... Cannot go into the DSM system page ... I also rewrite the alpha7.img, but still fail to boot ... Thanks... hmmmm, it's known issue in virtual machines. Are you using AMD cpu? Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 17, 2014 Author Share #230 Posted February 17, 2014 hi ! Could it be use in virtual box ? I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files. Other then that, it boot and then shuntdown ... Cannot go into the DSM system page ... I also rewrite the alpha7.img, but still fail to boot ... Thanks... hmmmm, it's known issue in virtual machines. Are you using AMD cpu? Quote Link to comment Share on other sites More sharing options...
carlchan Posted February 17, 2014 Share #231 Posted February 17, 2014 hi ! Could it be use in virtual box ? I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files. Other then that, it boot and then shuntdown ... Cannot go into the DSM system page ... I also rewrite the alpha7.img, but still fail to boot ... Thanks... hmmmm, it's known issue in virtual machines. Are you using AMD cpu? Yes, HP N40L Quote Link to comment Share on other sites More sharing options...
carlchan Posted February 17, 2014 Share #232 Posted February 17, 2014 hi ! Could it be use in virtual box ? I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files. Other then that, it boot and then shuntdown ... Cannot go into the DSM system page ... I also rewrite the alpha7.img, but still fail to boot ... Thanks... hmmmm, it's known issue in virtual machines. Are you using AMD cpu? Yes, HP N40L Quote Link to comment Share on other sites More sharing options...
carlchan Posted February 17, 2014 Share #233 Posted February 17, 2014 hi ! Could it be use in virtual box ? I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files. Other then that, it boot and then shuntdown ... Cannot go into the DSM system page ... I also rewrite the alpha7.img, but still fail to boot ... Thanks... hmmmm, it's known issue in virtual machines. Are you using AMD cpu? Yes, HP N40L Oh ... It work la!! It is a problem on SCSI hdd setting, set back the data disk to sata is ok.. Thank you gnoboot ... Quote Link to comment Share on other sites More sharing options...
carlchan Posted February 17, 2014 Share #234 Posted February 17, 2014 hi ! Could it be use in virtual box ? I install it , it work on the first time and let me apply the DSM_DS3612xs_4418.pat(org. pat file from syno-logy) files. Other then that, it boot and then shuntdown ... Cannot go into the DSM system page ... I also rewrite the alpha7.img, but still fail to boot ... Thanks... hmmmm, it's known issue in virtual machines. Are you using AMD cpu? Yes, HP N40L Oh ... It work la!! It is a problem on SCSI hdd setting, set back the data disk to sata is ok.. Thank you gnoboot ... Quote Link to comment Share on other sites More sharing options...
revaiz Posted February 17, 2014 Share #235 Posted February 17, 2014 I can use the Alpha-7 to install DSM and work fine, but I cannot scan my USB TV Stick when I use Alpha-7 to boot up (Alpha-5 can scan it)... Quote Link to comment Share on other sites More sharing options...
revaiz Posted February 17, 2014 Share #236 Posted February 17, 2014 I can use the Alpha-7 to install DSM and work fine, but I cannot scan my USB TV Stick when I use Alpha-7 to boot up (Alpha-5 can scan it)... Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 17, 2014 Author Share #237 Posted February 17, 2014 I can use the Alpha-7 to install DSM and work fine, but I cannot scan my USB TV Stick when I use Alpha-7 to boot up (Alpha-5 can scan it)... Could you pm me the dmesg or `lspci -vvv` output from alpha5 and alpha7? Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 17, 2014 Author Share #238 Posted February 17, 2014 I can use the Alpha-7 to install DSM and work fine, but I cannot scan my USB TV Stick when I use Alpha-7 to boot up (Alpha-5 can scan it)... Could you pm me the dmesg or `lspci -vvv` output from alpha5 and alpha7? Quote Link to comment Share on other sites More sharing options...
revaiz Posted February 17, 2014 Share #239 Posted February 17, 2014 I can use the Alpha-7 to install DSM and work fine, but I cannot scan my USB TV Stick when I use Alpha-7 to boot up (Alpha-5 can scan it)... Could you pm me the dmesg or `lspci -vvv` output from alpha5 and alpha7? I can post the output from alpha5 first. Output from alpha7 will be provided later... 00:00.0 Class 0600: Device 1022:9601 Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Capabilities: [c4] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 3.00 Link Frequency 0: 1.6GHz Link Error 0: Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [54] HyperTransport: UnitID Clumping Capabilities: [40] HyperTransport: Retry Mode Capabilities: [9c] HyperTransport: #1a Capabilities: [f8] HyperTransport: #1c 00:01.0 Class 0604: Device 103c:9602 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe700000-fe8fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [b0] Subsystem: Device 103c:1609 00:06.0 Class 0604: Device 1022:9606 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag+ RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4149 Capabilities: [b0] Subsystem: Device 103c:1609 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [110 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport 00:11.0 Class 0106: Device 1002:4391 (rev 40) (prog-if 01) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: I/O ports at d000 [size=1] Region 1: I/O ports at c000 [size=1] Region 2: I/O ports at b000 [size=1] Region 3: I/O ports at a000 [size=1] Region 4: I/O ports at 9000 [size=1] Region 5: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+ Address: 00000000fee0100c Data: 4159 Capabilities: [70] SATA HBA v1.0 InCfgSpace Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP+ Kernel driver in use: ahci 00:12.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K] 00:12.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff800 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:13.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K] 00:13.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff400 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:14.0 Class 0c05: Device 1002:4385 (rev 42) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:14.3 Class 0601: Device 1002:439d (rev 40) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 00:14.4 Class 0604: Device 1002:4384 (rev 40) (prog-if 01) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:16.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K] 00:16.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:18.0 Class 0600: Device 1022:1200 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- Link Control: CFlE- CST- CFE- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.6GHz Link Error: Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- 00:18.1 Class 0600: Device 1022:1201 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:18.2 Class 0600: Device 1022:1202 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:18.3 Class 0600: Device 1022:1203 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [f0] Secure device <?> 00:18.4 Class 0600: Device 1022:1204 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 01:05.0 Class 0300: Device 1002:9712 Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at e000 [size=11] Region 2: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at fe700000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at [disabled] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 02:00.0 Class 0200: Device 14e4:165b (rev 10) Subsystem: Device 103c:705d Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [40] Vital Product Data Product Name: HP NC107i PCIe Gigabit Server Adapter Read-only fields: [PN] Part number: BCM95723 [EC] Engineering changes: 106679-15 [sN] Serial number: 0123456789 [MN] Manufacture ID: 31 34 65 34 [RV] Reserved: checksum good, 37 byte(s) reserved Read/write fields: [YA] Asset tag: XYZ01234567 [RW] Read-write area: 107 byte(s) free End Capabilities: [60] Vendor Specific Information: Len=6c <?> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4161 Capabilities: [cc] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [13c v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number xx-xx-xx-xx-xx-xx-xx-xx Capabilities: [16c v1] Power Budgeting <?> Kernel driver in use: tg3 Quote Link to comment Share on other sites More sharing options...
revaiz Posted February 17, 2014 Share #240 Posted February 17, 2014 I can use the Alpha-7 to install DSM and work fine, but I cannot scan my USB TV Stick when I use Alpha-7 to boot up (Alpha-5 can scan it)... Could you pm me the dmesg or `lspci -vvv` output from alpha5 and alpha7? I can post the output from alpha5 first. Output from alpha7 will be provided later... 00:00.0 Class 0600: Device 1022:9601 Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Capabilities: [c4] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 3.00 Link Frequency 0: 1.6GHz Link Error 0: Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [54] HyperTransport: UnitID Clumping Capabilities: [40] HyperTransport: Retry Mode Capabilities: [9c] HyperTransport: #1a Capabilities: [f8] HyperTransport: #1c 00:01.0 Class 0604: Device 103c:9602 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe700000-fe8fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [b0] Subsystem: Device 103c:1609 00:06.0 Class 0604: Device 1022:9606 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag+ RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4149 Capabilities: [b0] Subsystem: Device 103c:1609 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [110 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport 00:11.0 Class 0106: Device 1002:4391 (rev 40) (prog-if 01) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: I/O ports at d000 [size=1] Region 1: I/O ports at c000 [size=1] Region 2: I/O ports at b000 [size=1] Region 3: I/O ports at a000 [size=1] Region 4: I/O ports at 9000 [size=1] Region 5: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+ Address: 00000000fee0100c Data: 4159 Capabilities: [70] SATA HBA v1.0 InCfgSpace Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP+ Kernel driver in use: ahci 00:12.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K] 00:12.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff800 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:13.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K] 00:13.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff400 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:14.0 Class 0c05: Device 1002:4385 (rev 42) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:14.3 Class 0601: Device 1002:439d (rev 40) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 00:14.4 Class 0604: Device 1002:4384 (rev 40) (prog-if 01) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:16.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K] 00:16.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:18.0 Class 0600: Device 1022:1200 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- Link Control: CFlE- CST- CFE- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.6GHz Link Error: Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- 00:18.1 Class 0600: Device 1022:1201 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:18.2 Class 0600: Device 1022:1202 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:18.3 Class 0600: Device 1022:1203 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [f0] Secure device <?> 00:18.4 Class 0600: Device 1022:1204 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 01:05.0 Class 0300: Device 1002:9712 Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at e000 [size=11] Region 2: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at fe700000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at [disabled] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 02:00.0 Class 0200: Device 14e4:165b (rev 10) Subsystem: Device 103c:705d Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [40] Vital Product Data Product Name: HP NC107i PCIe Gigabit Server Adapter Read-only fields: [PN] Part number: BCM95723 [EC] Engineering changes: 106679-15 [sN] Serial number: 0123456789 [MN] Manufacture ID: 31 34 65 34 [RV] Reserved: checksum good, 37 byte(s) reserved Read/write fields: [YA] Asset tag: XYZ01234567 [RW] Read-write area: 107 byte(s) free End Capabilities: [60] Vendor Specific Information: Len=6c <?> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4161 Capabilities: [cc] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [13c v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number xx-xx-xx-xx-xx-xx-xx-xx Capabilities: [16c v1] Power Budgeting <?> Kernel driver in use: tg3 Quote Link to comment Share on other sites More sharing options...
oswaldini Posted February 17, 2014 Share #241 Posted February 17, 2014 Hi, can you add support for pinnacle pctv 330e em28xx (em2882/3) [ 233.845818] Linux video capture interface: v2.00 [ 233.904054] em28xx: New device @ 480 Mbps (0000:0000, interface 0, class 0) [ 233.904061] em28xx: Audio interface 0 found (Vendor Class) [ 233.904066] em28xx: Video interface 0 found: isoc [ 233.904071] em28xx: DVB interface 0 found: isoc [ 233.904196] em28xx: chip ID is em2882/3 [ 234.017108] i2c-core: Attempt to register an adapter with no name! [ 234.017114] em2882/3 #0: em28xx_i2c_register: i2c_add_adapter failed! retval [-22] [ 234.017118] em2882/3 #0: em28xx_init_dev: em28xx_i2c_register bus 0 - error [-22]! [ 234.017143] em28xx: probe of 1-4:1.0 failed with error -22 [ 234.017341] usbcore: registered new interface driver em28xx [ 234.050846] Em28xx: Initialized (Em28xx Input Extension) extension [ 234.070870] dvb_core: Unknown symbol __refrigerator (err 0) [ 234.119478] drxk: Unknown symbol intlog10 (err 0) [ 234.133125] cxd2820r: Unknown symbol intlog10 (err 0) [ 234.133168] cxd2820r: Unknown symbol intlog2 (err 0) [ 234.327075] lgdt330x: Unknown symbol intlog10 (err 0) [ 234.350556] lgdt3305: Unknown symbol intlog10 (err 0) [ 234.400293] em28xx_dvb: Unknown symbol dvb_dmxdev_init (err 0) [ 234.400353] em28xx_dvb: Unknown symbol dvb_register_adapter (err 0) [ 234.400390] em28xx_dvb: Unknown symbol dvb_dmx_release (err 0) [ 234.400447] em28xx_dvb: Unknown symbol dvb_net_init (err 0) [ 234.400480] em28xx_dvb: Unknown symbol dvb_dmx_swfilter (err 0) [ 234.400517] em28xx_dvb: Unknown symbol dvb_dmxdev_release (err 0) [ 234.400551] em28xx_dvb: Unknown symbol dvb_frontend_detach (err 0) [ 234.400584] em28xx_dvb: Unknown symbol dvb_net_release (err 0) [ 234.400623] em28xx_dvb: Unknown symbol dvb_unregister_frontend (err 0) [ 234.400662] em28xx_dvb: Unknown symbol dvb_register_frontend (err 0) [ 234.400696] em28xx_dvb: Unknown symbol dvb_unregister_adapter (err 0) [ 234.400729] em28xx_dvb: Unknown symbol dvb_dmx_init (err 0) I found that: https://github.com/andy928/xpenology/tr ... deo/em28xx http://www.linuxtv.org/wiki/index.php/H ... V-HVR-930C Quote Link to comment Share on other sites More sharing options...
oswaldini Posted February 17, 2014 Share #242 Posted February 17, 2014 Hi, can you add support for pinnacle pctv 330e em28xx (em2882/3) [ 233.845818] Linux video capture interface: v2.00 [ 233.904054] em28xx: New device @ 480 Mbps (0000:0000, interface 0, class 0) [ 233.904061] em28xx: Audio interface 0 found (Vendor Class) [ 233.904066] em28xx: Video interface 0 found: isoc [ 233.904071] em28xx: DVB interface 0 found: isoc [ 233.904196] em28xx: chip ID is em2882/3 [ 234.017108] i2c-core: Attempt to register an adapter with no name! [ 234.017114] em2882/3 #0: em28xx_i2c_register: i2c_add_adapter failed! retval [-22] [ 234.017118] em2882/3 #0: em28xx_init_dev: em28xx_i2c_register bus 0 - error [-22]! [ 234.017143] em28xx: probe of 1-4:1.0 failed with error -22 [ 234.017341] usbcore: registered new interface driver em28xx [ 234.050846] Em28xx: Initialized (Em28xx Input Extension) extension [ 234.070870] dvb_core: Unknown symbol __refrigerator (err 0) [ 234.119478] drxk: Unknown symbol intlog10 (err 0) [ 234.133125] cxd2820r: Unknown symbol intlog10 (err 0) [ 234.133168] cxd2820r: Unknown symbol intlog2 (err 0) [ 234.327075] lgdt330x: Unknown symbol intlog10 (err 0) [ 234.350556] lgdt3305: Unknown symbol intlog10 (err 0) [ 234.400293] em28xx_dvb: Unknown symbol dvb_dmxdev_init (err 0) [ 234.400353] em28xx_dvb: Unknown symbol dvb_register_adapter (err 0) [ 234.400390] em28xx_dvb: Unknown symbol dvb_dmx_release (err 0) [ 234.400447] em28xx_dvb: Unknown symbol dvb_net_init (err 0) [ 234.400480] em28xx_dvb: Unknown symbol dvb_dmx_swfilter (err 0) [ 234.400517] em28xx_dvb: Unknown symbol dvb_dmxdev_release (err 0) [ 234.400551] em28xx_dvb: Unknown symbol dvb_frontend_detach (err 0) [ 234.400584] em28xx_dvb: Unknown symbol dvb_net_release (err 0) [ 234.400623] em28xx_dvb: Unknown symbol dvb_unregister_frontend (err 0) [ 234.400662] em28xx_dvb: Unknown symbol dvb_register_frontend (err 0) [ 234.400696] em28xx_dvb: Unknown symbol dvb_unregister_adapter (err 0) [ 234.400729] em28xx_dvb: Unknown symbol dvb_dmx_init (err 0) I found that: https://github.com/andy928/xpenology/tr ... deo/em28xx http://www.linuxtv.org/wiki/index.php/H ... V-HVR-930C Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 17, 2014 Author Share #243 Posted February 17, 2014 Hi, can you add support for pinnacle pctv 330e em28xx (em2882/3) Multimedia support enabled in the kernel, will be included in Alpha8. Check my blog to get the latest updates and don't forget to click the ADs Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 17, 2014 Author Share #244 Posted February 17, 2014 Hi, can you add support for pinnacle pctv 330e em28xx (em2882/3) Multimedia support enabled in the kernel, will be included in Alpha8. Check my blog to get the latest updates and don't forget to click the ADs Quote Link to comment Share on other sites More sharing options...
neonflx Posted February 17, 2014 Share #245 Posted February 17, 2014 is there a method to install this directly to hardware without vm? thanks Quote Link to comment Share on other sites More sharing options...
neonflx Posted February 17, 2014 Share #246 Posted February 17, 2014 is there a method to install this directly to hardware without vm? thanks Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 17, 2014 Author Share #247 Posted February 17, 2014 is there a method to install this directly to hardware without vm? thanks It's the same process for installing to physical hardware. You just need to write the image to your USB disk. Attach your USB disk (PATA/SATA disk disconnected) and boot to your physical hardware using a LInux livecd. Get the USB disk path.# dmesg | egrep '^(sd|hd).*[1-9]'' Let assume your USB disk is /dev/sda (step 2 result), write the image to your USB disk.# dd if=gnoboot-alpha7 of=/dev/sda Open Synology Assistant to begin DSM installation. Quote Link to comment Share on other sites More sharing options...
gnoboot Posted February 17, 2014 Author Share #248 Posted February 17, 2014 is there a method to install this directly to hardware without vm? thanks It's the same process for installing to physical hardware. You just need to write the image to your USB disk. Attach your USB disk (PATA/SATA disk disconnected) and boot to your physical hardware using a LInux livecd. Get the USB disk path.# dmesg | egrep '^(sd|hd).*[1-9]'' Let assume your USB disk is /dev/sda (step 2 result), write the image to your USB disk.# dd if=gnoboot-alpha7 of=/dev/sda Open Synology Assistant to begin DSM installation. Quote Link to comment Share on other sites More sharing options...
oswaldini Posted February 18, 2014 Share #249 Posted February 18, 2014 Hi, can you add support for pinnacle pctv 330e em28xx (em2882/3) Multimedia support enabled in the kernel, will be included in Alpha8. Check my blog to get the latest updates and don't forget to click the ADs Sweet, thanks ! Will it be possible to do "clean" update in the future? I can make 5 beta update with telnet command but it doesn't work with 4.3 (3810 -> 3827) Quote Link to comment Share on other sites More sharing options...
oswaldini Posted February 18, 2014 Share #250 Posted February 18, 2014 Hi, can you add support for pinnacle pctv 330e em28xx (em2882/3) Multimedia support enabled in the kernel, will be included in Alpha8. Check my blog to get the latest updates and don't forget to click the ADs Sweet, thanks ! Will it be possible to do "clean" update in the future? I can make 5 beta update with telnet command but it doesn't work with 4.3 (3810 -> 3827) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.