revaiz

Members
  • Content Count

    11
  • Joined

  • Last visited

Community Reputation

0 Neutral

About revaiz

  • Rank
    Newbie
  1. revaiz

    XPEnology gnoBoot

    Hi gnoboot, Thank you very much!! I have tried to use the gnoboot-alpha 10.4, I can install my TV usb... [ 548.508112] usb 2-1: new high-speed USB device number 4 using ehci_hcd [ 548.908546] dvb-usb: found a 'Conexant DMB-TH Stick' in warm state. [ 549.249405] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 549.249602] DVB: registering new adapter (Conexant DMB-TH Stick) [ 551.459336] usb 2-1: DVB: registering adapter 0 frontend 0 (Legend Silicon LGS8913/LGS8GXX DMB-TH)... [ 551.459576] MXL5005S: Attached at address 0x63 [ 551.460018] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-1/input/input4 [ 551.460025] dvb-usb: schedule remote query interval to 100 msecs. [ 551.460244] dvb-usb: Conexant DMB-TH Stick successfully initialized and connected. [ 551.461146] usbcore: registered new interface driver dvb_usb_cxusb BTW, I have clicked the ADs to support development.
  2. revaiz

    XPEnology gnoBoot

    Hi gnoboot, I would like to install my Contex DTV-01 USB for TV recording on my HP N54L (gnoboot alpha 10.3 + DSM 5.0 4458), but the below error message has been shown... [ 253.793103] usb 1-3: new high-speed USB device number 3 using ehci_hcd [ 254.300612] dvb-usb: found a 'Conexant DMB-TH Stick' in warm state. [ 254.641437] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 254.641628] DVB: registering new adapter (Conexant DMB-TH Stick) [ 256.852364] usb 1-3: DVB: registering adapter 0 frontend 0 (Legend Silicon LGS8913/LGS8GXX DMB-TH)... [ 256.852605] MXL5005S: Attached at address 0x63 [ 256.853050] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-3/input/input4 [ 256.853057] dvb-usb: schedule remote query interval to 100 msecs. [ 256.853098] ------------[ cut here ]------------ [ 256.853139] kernel BUG at kernel/workqueue.c:570! [ 256.853177] invalid opcode: 0000 [#1] SMP [ 256.853278] CPU 0 [ 256.853312] Modules linked in: dvb_usb_cxusb(O+) mxl5005s(O) lgs8gxx(O) atbm8830(O) mt352(O) lgdt330x(O) tuner_simple(O) tuner_types(O) tuner_xc2028(O) dvb_pll(O) max2165(O) zl10353(O) cx22702(O) dvb_usb(O) rc_core(O) dib0070(O) dib7000p(O) dibx000_common(O) dvb_core(O) cifs udf isofs loop usbhid hid usblp usb_storage uhci_hcd etxhci_hcd xhci_hcd ohci_hcd ehci_hcd bromolow_synobios(P) btrfs zlib_deflate hfsplus md4 hmac i2c_algo_bit fuse vfat fat chainiv cpufreq_conservative cpufreq_powersave cpufreq_performance cpufreq_ondemand mperf processor cpufreq_stats freq_table dm_snapshot crc_itu_t quota_v2 quota_tree usbcore psnap p8022 llc usb_common vmxnet3 synoacl_ext4(P) synoacl_vfs(P) hptiop 3w_sas 3w_9xxx 3w_xxxx mv61xx(P) mvsas hpsa arcmsr aic7xxx aic79xx aic94xx aacraid megaraid_sas megaraid_mbox megaraid_mm mpt2sas mptsas mptspi mptscsih mptbase scsi_transport_spi scsi_wait_scan sg ata_piix sata_uli sata_svw sata_qstor sata_inic162x sata_sis pata_sis stex sata_sx4 sata_promise sata_nv sata_via sata_sil pata_serverworks pata_atiixp pata_amd pata_oldpiix pata_sch pata_artop pata_atp867x pata_pdc202xx_old pata_pdc2027x pata_it821x pata_hpt3x2n pata_hpt37x pata_hpt366 pata_hpt3x3 pdc_adma pata_via pata_sil680 pata_rdc pata_ninja32 pata_netcell pata_marvell pata_jmicron pata_cmd64x pata_ali pata_acpi ata_generic iscsi_tcp libiscsi_tcp libiscsi enic qlge qlcnic qla3xxx netxen_nic mlx4_en mlx4_core cxgb4vf cxgb4 cxgb3 cxgb cnic ipv6 bnx2x bna be2net sis900 sis190 jme atl1e(O) atl1c atl2(O) atl1(O) alx(O) sky2 skge via_velocity crc_ccitt via_rhine r8169(O) r8168(O) 8139too 8139cp tg3(O) libphy b44(O) bnx2 mmc_core ssb uio forcedeth ixgbe ixgb igb_new(O) ioatdma e1000e_new(O) e1000 e100 dca pcnet32 amd8111e tulip mdio mii container fan thermal_sys compat(O) cryptd ecryptfs sha512_generic sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic libcrc32c crc32c eseqiv krng ansi_cprng cts rng aes_generic md5 cbc cryptomgr pcompress aead crypto_hash crypto_blkcipher crypto_wq crypto_algapi [last unloaded: bromolow_synobios] [ 256.854008] [ 256.854008] Pid: 27240, comm: insmod Tainted: P C O 3.2.40 #1 HP ProLiant MicroServer [ 256.854008] RIP: 0010:[] [] get_work_gcwq+0x28/0x32 [ 256.854008] RSP: 0018:ffff8802173cbb60 EFLAGS: 00010287 [ 256.854008] RAX: 0000000000000000 RBX: ffff8802141765e0 RCX: 0000000000000064 [ 256.854008] RDX: 0000000000000000 RSI: ffff88021e808140 RDI: 0000000000000009 [ 256.854008] RBP: ffff88021e808140 R08: 000000000000d3a7 R09: ffffffff815390f7 [ 256.854008] R10: 0000000000000000 R11: 0000000000000003 R12: ffff880214176600 [ 256.854008] R13: 00000000ffffffff R14: 0000000000000064 R15: 0000000000000001 [ 256.854008] FS: 00000000006fc880(0000) GS:ffff88021fc00000(0063) knlGS:00000000f75a0b40 [ 256.854008] CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b [ 256.854008] CR2: 00000000082b81e0 CR3: 000000021492b000 CR4: 00000000000006f0 [ 256.854008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 256.854008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 256.854008] Process insmod (pid: 27240, threadinfo ffff8802173ca000, task ffff880214fd8eb0) [ 256.854008] Stack: [ 256.854008] ffffffff8104f060 0000000000000064 ffff880214174000 0000000000000000 [ 256.854008] 0000000000000023 ffff880214174000 ffffffffa0410093 0000000000000000 [ 256.854008] ffff880214175130 ffff880214175298 0000000000000001 ffff880214174a30 [ 256.854008] Call Trace: [ 256.854008] [] ? queue_delayed_work_on+0x8f/0xfe [ 256.854008] [] ? dvb_usb_remote_init+0x273/0x440 [dvb_usb] [ 256.854008] [] ? dvb_usb_device_init+0x62f/0x700 [dvb_usb] [ 256.854008] [] ? cxusb_probe+0x1a2/0x1e0 [dvb_usb_cxusb] [ 256.854008] [] ? usb_probe_interface+0xbf/0xfa [usbcore] [ 256.854008] [] ? driver_probe_device+0x99/0x11c [ 256.854008] [] ? driver_probe_device+0x11c/0x11c [ 256.854008] [] ? __driver_attach+0x45/0x61 [ 256.854008] [] ? bus_for_each_dev+0x43/0x75 [ 256.854008] [] ? bus_add_driver+0xb2/0x201 [ 256.854008] [] ? driver_register+0x95/0x101 [ 256.854008] [] ? usb_register_driver+0x7e/0x121 [usbcore] [ 256.854008] [] ? 0xffffffffa05bffff [ 256.854008] [] ? do_one_initcall+0x79/0x132 [ 256.854008] [] ? sys_init_module+0x105c/0x1201 [ 256.854008] [] ? dput+0xdd/0xfe [ 256.854008] [] ? cstar_dispatch+0x7/0x32 [ 256.854008] Code: 08 eb be 48 8b 07 a8 04 74 06 30 c0 48 8b 00 c3 48 89 c7 31 c0 48 c1 ef 08 83 ff 11 74 16 3b 3d ca e8 5f 00 72 09 83 ff 10 74 04 <0f> 0b eb fe e9 59 fd ff ff c3 e8 c9 ff ff ff 48 85 c0 ba 11 00 [ 256.854008] RIP [] get_work_gcwq+0x28/0x32 [ 256.854008] RSP [ 256.864674] ---[ end trace 4cefa1e62067a3e2 ]--- lsmod. Module Size Used by Tainted: P dvb_usb_cxusb 70639 1 mxl5005s 36976 1 dvb_usb_cxusb lgs8gxx 12026 1 dvb_usb_cxusb atbm8830 6633 1 dvb_usb_cxusb mt352 6244 1 dvb_usb_cxusb lgdt330x 8618 1 dvb_usb_cxusb tuner_simple 14480 1 dvb_usb_cxusb tuner_types 19453 1 tuner_simple tuner_xc2028 21113 1 dvb_usb_cxusb dvb_pll 11055 1 dvb_usb_cxusb max2165 5992 1 dvb_usb_cxusb zl10353 7141 1 dvb_usb_cxusb cx22702 5522 1 dvb_usb_cxusb dvb_usb 20086 1 dvb_usb_cxusb rc_core 14795 1 dvb_usb dib0070 8661 1 dvb_usb_cxusb dib7000p 29421 1 dvb_usb_cxusb dibx000_common 7575 1 dib7000p dvb_core 94675 3 lgdt330x,dvb_usb,dib7000p cifs 220445 0 udf 67659 0 isofs 28854 0 loop 15123 0 usbhid 23310 0 hid 44680 1 usbhid usblp 10616 0 usb_storage 46747 0 uhci_hcd 19576 0 etxhci_hcd 67510 0 xhci_hcd 69082 0 ohci_hcd 18671 0 ehci_hcd 34785 0 bromolow_synobios 33535 0 btrfs 474209 0 zlib_deflate 18625 1 btrfs hfsplus 81886 0 md4 3016 0 hmac 2791 0 i2c_algo_bit 4526 0 fuse 60252 0 vfat 8327 0 fat 44178 1 vfat chainiv 2954 0 cpufreq_conservative 5046 0 cpufreq_powersave 882 0 cpufreq_performance 888 0 cpufreq_ondemand 5763 0 mperf 1247 0 processor 28130 0 cpufreq_stats 3152 0 freq_table 3039 2 cpufreq_ondemand,cpufreq_stats dm_snapshot 26176 0 crc_itu_t 1453 1 udf quota_v2 3794 2 quota_tree 7334 1 quota_v2 usbcore 158988 11 dvb_usb_cxusb,dvb_usb,usbhid,usblp,usb_storage,uhci_hcd,etxhci_hcd,xhci_hcd,ohci_hcd,ehci_hcd psnap 2059 0 p8022 1161 0 llc 4518 2 psnap,p8022 usb_common 938 1 usbcore vmxnet3 31983 0 synoacl_ext4 13321 3 synoacl_vfs 5103 3 hptiop 11688 0 3w_sas 19147 0 3w_9xxx 30028 0 3w_xxxx 21677 0 mv61xx 74473 0 mvsas 42188 0 hpsa 38977 0 arcmsr 24915 0 aic7xxx 106332 0 aic79xx 122165 0 aic94xx 62657 0 aacraid 67635 0 megaraid_sas 62338 0 megaraid_mbox 24607 0 megaraid_mm 7388 1 megaraid_mbox mpt2sas 150666 0 mptsas 43587 0 mptspi 13917 0 mptscsih 27214 2 mptsas,mptspi mptbase 77746 3 mptsas,mptspi,mptscsih scsi_transport_spi 18556 3 aic7xxx,aic79xx,mptspi scsi_wait_scan 661 0 sg 22358 0 ata_piix 23000 0 sata_uli 3183 0 sata_svw 4464 0 sata_qstor 5209 0 sata_inic162x 6998 0 sata_sis 3989 0 pata_sis 11981 1 sata_sis stex 13583 0 sata_sx4 8129 0 sata_promise 10100 0 sata_nv 19611 0 sata_via 8313 0 sata_sil 7948 0 pata_serverworks 5662 0 pata_atiixp 4276 0 pata_amd 10858 0 pata_oldpiix 3470 0 pata_sch 2745 0 pata_artop 5337 0 pata_atp867x 4984 0 pata_pdc202xx_old 4801 0 pata_pdc2027x 6497 0 pata_it821x 9134 0 pata_hpt3x2n 5939 0 pata_hpt37x 12101 0 pata_hpt366 5455 0 pata_hpt3x3 3425 0 pdc_adma 5425 0 pata_via 9236 0 pata_sil680 5206 0 pata_rdc 4500 0 pata_ninja32 3094 0 pata_netcell 2372 0 pata_marvell 3089 0 pata_jmicron 2577 0 pata_cmd64x 6383 0 pata_ali 9807 0 pata_acpi 3163 0 ata_generic 3694 0 iscsi_tcp 8593 0 libiscsi_tcp 12578 1 iscsi_tcp libiscsi 35722 2 iscsi_tcp,libiscsi_tcp enic 46142 0 qlge 68376 0 qlcnic 100943 0 qla3xxx 28926 0 netxen_nic 78324 0 mlx4_en 43845 0 mlx4_core 84914 1 mlx4_en cxgb4vf 41998 0 cxgb4 81895 0 cxgb3 123820 0 cxgb 60466 0 cnic 41094 0 ipv6 250211 50 cnic bnx2x 398572 0 bna 99588 0 be2net 56533 0 sis900 17654 0 sis190 15442 0 jme 25926 0 atl1e 27382 0 atl1c 27716 0 atl2 22399 0 atl1 26988 0 alx 21780 0 sky2 43527 0 skge 34186 0 via_velocity 28447 0 crc_ccitt 1453 1 via_velocity via_rhine 20577 0 r8169 26838 0 r8168 245234 0 8139too 17811 0 8139cp 16565 0 tg3 147336 0 libphy 18014 0 b44 22596 0 bnx2 62996 0 mmc_core 68817 0 ssb 33059 1 b44 uio 8124 1 cnic forcedeth 47296 0 ixgbe 116651 0 ixgb 37775 0 igb_new 156974 0 ioatdma 35509 0 e1000e_new 186813 0 e1000 88919 0 e100 25371 0 dca 5755 3 ixgbe,igb_new,ioatdma pcnet32 27448 0 amd8111e 16385 0 tulip 44012 0 mdio 3699 5 cxgb3,cxgb,bnx2x,alx,ixgbe mii 4102 11 sis900,sis190,jme,atl1,via_rhine,8139too,8139cp,b44,e100,pcnet32,amd8111e container 2398 0 fan 2359 0 thermal_sys 14343 2 processor,fan compat 17647 5 atl1e,atl2,atl1,alx,b44 cryptd 7859 0 ecryptfs 85626 0 sha512_generic 4708 0 sha256_generic 8662 0 sha1_generic 1952 0 ecb 1815 0 aes_x86_64 7565 0 authenc 5941 0 des_generic 15895 0 libcrc32c 1003 2 btrfs,bnx2x crc32c 2597 1 eseqiv 2442 0 krng 1088 0 ansi_cprng 3487 0 cts 3577 0 rng 2354 4 chainiv,eseqiv,krng,ansi_cprng aes_generic 26402 1 aes_x86_64 md5 1704 0 cbc 2481 0 cryptomgr 2323 0 pcompress 1683 0 aead 5852 3 cryptd,authenc,cryptomgr crypto_hash 13298 11 cifs,md4,hmac,cryptd,sha512_generic,sha256_generic,sha1_generic,authenc,libcrc32c,crc32c,md5 crypto_blkcipher 13075 8 chainiv,cryptd,ecryptfs,ecb,authenc,eseqiv,cts,cbc crypto_wq 842 2 chainiv,cryptd crypto_algapi 14107 18 hmac,chainiv,cryptd,ecb,aes_x86_64,authenc,des_generic,eseqiv,krng,ansi_cprng,cts,aes_generic,cbc,cryptomgr,pcompress,aead,crypto_hash,crypto_blkcipher lspci -v 00:00.0 Class 0600: Device 1022:9601 Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 0 Capabilities: [c4] HyperTransport: Slave or Primary Interface Capabilities: [54] HyperTransport: UnitID Clumping Capabilities: [40] HyperTransport: Retry Mode Capabilities: [9c] HyperTransport: #1a Capabilities: [f8] HyperTransport: #1c 00:01.0 Class 0604: Device 103c:9602 Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe700000-fe8fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [b0] Subsystem: Device 103c:1609 00:06.0 Class 0604: Device 1022:9606 Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fe900000-fe9fffff Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Port (Slot-), MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [b0] Subsystem: Device 103c:1609 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [110] Virtual Channel Kernel driver in use: pcieport 00:11.0 Class 0106: Device 1002:4391 (rev 40) (prog-if 01) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 41 I/O ports at d000 [size=1] I/O ports at c000 [size=1] I/O ports at b000 [size=1] I/O ports at a000 [size=1] I/O ports at 9000 [size=1] Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+ Capabilities: [70] SATA HBA v1.0 Capabilities: [a4] PCI Advanced Features Kernel driver in use: ahci 00:12.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17 Memory at fe6ff800 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:13.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17 Memory at fe6ff400 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:14.0 Class 0c05: Device 1002:4385 (rev 42) Flags: 66MHz, medium devsel 00:14.3 Class 0601: Device 1002:439d (rev 40) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 Class 0604: Device 1002:4384 (rev 40) (prog-if 01) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 00:16.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:16.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17 Memory at fe6ff000 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:18.0 Class 0600: Device 1022:1200 Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Class 0600: Device 1022:1201 Flags: fast devsel 00:18.2 Class 0600: Device 1022:1202 Flags: fast devsel 00:18.3 Class 0600: Device 1022:1203 Flags: fast devsel Capabilities: [f0] Secure device <?> 00:18.4 Class 0600: Device 1022:1204 Flags: fast devsel 01:05.0 Class 0300: Device 1002:9712 Subsystem: Device 103c:1609 Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at f0000000 (32-bit, prefetchable) [size=128M] I/O ports at e000 [size=11] Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] Memory at fe700000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at [disabled] Capabilities: [50] Power Management version 3 Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ 02:00.0 Class 0200: Device 14e4:165b (rev 10) Subsystem: Device 103c:705d Flags: bus master, fast devsel, latency 0, IRQ 42 Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 3 Capabilities: [40] Vital Product Data Capabilities: [60] Vendor Specific Information: Len=6c <?> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [cc] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 38-ea-a7-ff-fe-a6-02-c9 Capabilities: [16c] Power Budgeting <?> Kernel driver in use: tg3 lspci -vvv 00:00.0 Class 0600: Device 1022:9601 Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Capabilities: [c4] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 3.00 Link Frequency 0: 1.6GHz Link Error 0: Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [54] HyperTransport: UnitID Clumping Capabilities: [40] HyperTransport: Retry Mode Capabilities: [9c] HyperTransport: #1a Capabilities: [f8] HyperTransport: #1c 00:01.0 Class 0604: Device 103c:9602 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe700000-fe8fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [b0] Subsystem: Device 103c:1609 00:06.0 Class 0604: Device 1022:9606 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag+ RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4149 Capabilities: [b0] Subsystem: Device 103c:1609 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [110 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport 00:11.0 Class 0106: Device 1002:4391 (rev 40) (prog-if 01) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: I/O ports at d000 [size=1] Region 1: I/O ports at c000 [size=1] Region 2: I/O ports at b000 [size=1] Region 3: I/O ports at a000 [size=1] Region 4: I/O ports at 9000 [size=1] Region 5: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+ Address: 00000000fee0100c Data: 4159 Capabilities: [70] SATA HBA v1.0 InCfgSpace Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ahci 00:12.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff800 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:13.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff400 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:14.0 Class 0c05: Device 1002:4385 (rev 42) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:14.3 Class 0601: Device 1002:439d (rev 40) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 00:14.4 Class 0604: Device 1002:4384 (rev 40) (prog-if 01) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:16.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:16.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:18.0 Class 0600: Device 1022:1200 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- Link Control: CFlE- CST- CFE- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.6GHz Link Error: Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- 00:18.1 Class 0600: Device 1022:1201 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:18.2 Class 0600: Device 1022:1202 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:18.3 Class 0600: Device 1022:1203 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [f0] Secure device <?> 00:18.4 Class 0600: Device 1022:1204 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 01:05.0 Class 0300: Device 1002:9712 Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at e000 [size=11] Region 2: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at fe700000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at [disabled] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 02:00.0 Class 0200: Device 14e4:165b (rev 10) Subsystem: Device 103c:705d Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [40] Vital Product Data Product Name: HP NC107i PCIe Gigabit Server Adapter Read-only fields: [PN] Part number: BCM95723 [EC] Engineering changes: 106679-15 [sN] Serial number: 0123456789 [MN] Manufacture ID: 31 34 65 34 [RV] Reserved: checksum good, 37 byte(s) reserved Read/write fields: [YA] Asset tag: XYZ01234567 [RW] Read-write area: 107 byte(s) free End Capabilities: [60] Vendor Specific Information: Len=6c <?> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4161 Capabilities: [cc] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [13c v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 38-ea-a7-ff-fe-a6-02-c9 Capabilities: [16c v1] Power Budgeting <?> Kernel driver in use: tg3 By the way, I can install it by using gnoboot alpha 5 (DSM 5.0 4418 beta)... [ 1095.876075] usb 2-1: new high-speed USB device number 3 using ehci_hcd [ 1096.256096] dvb-usb: found a 'Conexant DMB-TH Stick' in warm state. [ 1096.597405] dvb-usb: will pass the complete MPEG2 transport stream to the sof tware demuxer. [ 1096.597592] DVB: registering new adapter (Conexant DMB-TH Stick) [ 1098.808315] usb 2-1: DVB: registering adapter 0 frontend 0 (Legend Silicon LG S8913/LGS8GXX DMB-TH)... [ 1098.808559] MXL5005S: Attached at address 0x63 [ 1098.808997] input: IR-receiver inside an USB DVB receiver as /devices/pci0000 :00/0000:00:13.2/usb2/2-1/input/input0 [ 1098.809026] dvb-usb: schedule remote query interval to 100 msecs. [ 1098.809174] dvb-usb: Conexant DMB-TH Stick successfully initialized and conne cted. [ 1098.809930] usbcore: registered new interface driver dvb_usb_cxusb Thanks for your help!!!
  3. revaiz

    XPEnology gnoBoot

    Could you pm me the dmesg or `lspci -vvv` output from alpha5 and alpha7? I can post the output from alpha5 first. Output from alpha7 will be provided later... 00:00.0 Class 0600: Device 1022:9601 Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Capabilities: [c4] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 3.00 Link Frequency 0: 1.6GHz Link Error 0: Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [54] HyperTransport: UnitID Clumping Capabilities: [40] HyperTransport: Retry Mode Capabilities: [9c] HyperTransport: #1a Capabilities: [f8] HyperTransport: #1c 00:01.0 Class 0604: Device 103c:9602 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe700000-fe8fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [b0] Subsystem: Device 103c:1609 00:06.0 Class 0604: Device 1022:9606 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag+ RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4149 Capabilities: [b0] Subsystem: Device 103c:1609 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [110 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport 00:11.0 Class 0106: Device 1002:4391 (rev 40) (prog-if 01) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: I/O ports at d000 [size=1] Region 1: I/O ports at c000 [size=1] Region 2: I/O ports at b000 [size=1] Region 3: I/O ports at a000 [size=1] Region 4: I/O ports at 9000 [size=1] Region 5: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+ Address: 00000000fee0100c Data: 4159 Capabilities: [70] SATA HBA v1.0 InCfgSpace Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP+ Kernel driver in use: ahci 00:12.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K] 00:12.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff800 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:13.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K] 00:13.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff400 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:14.0 Class 0c05: Device 1002:4385 (rev 42) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:14.3 Class 0601: Device 1002:439d (rev 40) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 00:14.4 Class 0604: Device 1002:4384 (rev 40) (prog-if 01) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:16.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K] 00:16.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:18.0 Class 0600: Device 1022:1200 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- Link Control: CFlE- CST- CFE- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.6GHz Link Error: Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- 00:18.1 Class 0600: Device 1022:1201 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:18.2 Class 0600: Device 1022:1202 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:18.3 Class 0600: Device 1022:1203 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [f0] Secure device <?> 00:18.4 Class 0600: Device 1022:1204 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 01:05.0 Class 0300: Device 1002:9712 Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at e000 [size=11] Region 2: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at fe700000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at [disabled] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 02:00.0 Class 0200: Device 14e4:165b (rev 10) Subsystem: Device 103c:705d Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [40] Vital Product Data Product Name: HP NC107i PCIe Gigabit Server Adapter Read-only fields: [PN] Part number: BCM95723 [EC] Engineering changes: 106679-15 [sN] Serial number: 0123456789 [MN] Manufacture ID: 31 34 65 34 [RV] Reserved: checksum good, 37 byte(s) reserved Read/write fields: [YA] Asset tag: XYZ01234567 [RW] Read-write area: 107 byte(s) free End Capabilities: [60] Vendor Specific Information: Len=6c <?> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4161 Capabilities: [cc] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [13c v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number xx-xx-xx-xx-xx-xx-xx-xx Capabilities: [16c v1] Power Budgeting <?> Kernel driver in use: tg3
  4. revaiz

    XPEnology gnoBoot

    Could you pm me the dmesg or `lspci -vvv` output from alpha5 and alpha7? I can post the output from alpha5 first. Output from alpha7 will be provided later... 00:00.0 Class 0600: Device 1022:9601 Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Capabilities: [c4] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 3.00 Link Frequency 0: 1.6GHz Link Error 0: Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [54] HyperTransport: UnitID Clumping Capabilities: [40] HyperTransport: Retry Mode Capabilities: [9c] HyperTransport: #1a Capabilities: [f8] HyperTransport: #1c 00:01.0 Class 0604: Device 103c:9602 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe700000-fe8fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [b0] Subsystem: Device 103c:1609 00:06.0 Class 0604: Device 1022:9606 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag+ RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4149 Capabilities: [b0] Subsystem: Device 103c:1609 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [110 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport 00:11.0 Class 0106: Device 1002:4391 (rev 40) (prog-if 01) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: I/O ports at d000 [size=1] Region 1: I/O ports at c000 [size=1] Region 2: I/O ports at b000 [size=1] Region 3: I/O ports at a000 [size=1] Region 4: I/O ports at 9000 [size=1] Region 5: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+ Address: 00000000fee0100c Data: 4159 Capabilities: [70] SATA HBA v1.0 InCfgSpace Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP+ Kernel driver in use: ahci 00:12.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K] 00:12.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff800 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:13.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K] 00:13.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff400 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:14.0 Class 0c05: Device 1002:4385 (rev 42) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:14.3 Class 0601: Device 1002:439d (rev 40) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 00:14.4 Class 0604: Device 1002:4384 (rev 40) (prog-if 01) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:16.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K] 00:16.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:18.0 Class 0600: Device 1022:1200 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- Link Control: CFlE- CST- CFE- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.6GHz Link Error: Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- 00:18.1 Class 0600: Device 1022:1201 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:18.2 Class 0600: Device 1022:1202 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:18.3 Class 0600: Device 1022:1203 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [f0] Secure device <?> 00:18.4 Class 0600: Device 1022:1204 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 01:05.0 Class 0300: Device 1002:9712 Subsystem: Device 103c:1609 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at e000 [size=11] Region 2: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at fe700000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at [disabled] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 02:00.0 Class 0200: Device 14e4:165b (rev 10) Subsystem: Device 103c:705d Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [40] Vital Product Data Product Name: HP NC107i PCIe Gigabit Server Adapter Read-only fields: [PN] Part number: BCM95723 [EC] Engineering changes: 106679-15 [sN] Serial number: 0123456789 [MN] Manufacture ID: 31 34 65 34 [RV] Reserved: checksum good, 37 byte(s) reserved Read/write fields: [YA] Asset tag: XYZ01234567 [RW] Read-write area: 107 byte(s) free End Capabilities: [60] Vendor Specific Information: Len=6c <?> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4161 Capabilities: [cc] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [13c v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number xx-xx-xx-xx-xx-xx-xx-xx Capabilities: [16c v1] Power Budgeting <?> Kernel driver in use: tg3
  5. revaiz

    XPEnology gnoBoot

    I can use the Alpha-7 to install DSM and work fine, but I cannot scan my USB TV Stick when I use Alpha-7 to boot up (Alpha-5 can scan it)...
  6. revaiz

    XPEnology gnoBoot

    I can use the Alpha-7 to install DSM and work fine, but I cannot scan my USB TV Stick when I use Alpha-7 to boot up (Alpha-5 can scan it)...
  7. revaiz

    XPEnology gnoBoot

    Sorry that I cannot copy files to my boot image (USB drive), since the files size of Alpha 6 is larger that 6.76MB.
  8. revaiz

    XPEnology gnoBoot

    Just use jdownloader to get the image or google for decrypt RSDF. Enjoy and report any issues . Thanks!! I can boot it on my N54L!!
  9. revaiz

    XPEnology gnoBoot

    Thanks a lot!! I would like to download the gnoboot-alpha5, but the file type is .RSDF?
  10. revaiz

    XPEnology gnoBoot

    Could you post the `lspci -v`result? I am using HP N54L too, I can post it for your reference... thanks. 00:00.0 Class 0600: Device 1022:9601 Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 0 Capabilities: [c4] HyperTransport: Slave or Primary Interface Capabilities: [54] HyperTransport: UnitID Clumping Capabilities: [40] HyperTransport: Retry Mode Capabilities: [9c] HyperTransport: #1a Capabilities: [f8] HyperTransport: #1c 00:01.0 Class 0604: Device 103c:9602 Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe700000-fe8fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [b0] Subsystem: Device 103c:1609 00:06.0 Class 0604: Device 1022:9606 Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fe900000-fe9fffff Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Port (Slot-), MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [b0] Subsystem: Device 103c:1609 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [110] Virtual Channel Kernel driver in use: pcieport 00:11.0 Class 0106: Device 1002:4391 (rev 40) (prog-if 01) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 41 I/O ports at d000 [size=1] I/O ports at c000 [size=1] I/O ports at b000 [size=1] I/O ports at a000 [size=1] I/O ports at 9000 [size=1] Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+ Capabilities: [70] SATA HBA v1.0 Capabilities: [a4] PCI Advanced Features Kernel driver in use: ahci 00:12.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17 Memory at fe6ff800 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:13.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17 Memory at fe6ff400 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:14.0 Class 0c05: Device 1002:4385 (rev 42) Flags: 66MHz, medium devsel 00:14.3 Class 0601: Device 1002:439d (rev 40) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 Class 0604: Device 1002:4384 (rev 40) (prog-if 01) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 00:16.0 Class 0c03: Device 1002:4397 (prog-if 10) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:16.2 Class 0c03: Device 1002:4396 (prog-if 20) Subsystem: Device 103c:1609 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17 Memory at fe6ff000 (32-bit, non-prefetchable) [size=11] Capabilities: [c0] Power Management version 2 Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00:18.0 Class 0600: Device 1022:1200 Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Class 0600: Device 1022:1201 Flags: fast devsel 00:18.2 Class 0600: Device 1022:1202 Flags: fast devsel 00:18.3 Class 0600: Device 1022:1203 Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k10temp 00:18.4 Class 0600: Device 1022:1204 Flags: fast devsel 01:05.0 Class 0300: Device 1002:9712 Subsystem: Device 103c:1609 Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at f0000000 (32-bit, prefetchable) [size=128M] I/O ports at e000 [size=11] Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] Memory at fe700000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at [disabled] Capabilities: [50] Power Management version 3 Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ 02:00.0 Class 0200: Device 14e4:165b (rev 10) Subsystem: Device 103c:705d Flags: bus master, fast devsel, latency 0, IRQ 42 Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 3 Capabilities: [40] Vital Product Data Capabilities: [60] Vendor Specific Information: Len=6c <?> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [cc] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number xx-xx-xx-xx-xx-xx-xx-xx Capabilities: [16c] Power Budgeting <?> Kernel driver in use: tg3
  11. revaiz

    XPEnology gnoBoot

    I have tried it for my HP N54L (Real PC), but cannot boot. Have anyone can boot it on N54L? Thanks.