shibby
-
Posts
155 -
Joined
-
Last visited
-
Days Won
5
Posts posted by shibby
-
-
22 hours ago, Orphée said:
If your DS918+ works, from my point of view thereis no real benefit to change.
Especially if you use hardware transcoding.thanks. At the moment i am on DS918+: i5-6500t, 4x HDD (SHR2), 2x SSD Sata (SHR), 2x NVMe (SSD Cache). All works fine including HW Transcodind and 10Gb ethernet card (atlantic)
-
which redpill-loader will be the best choice for i5-6500t (skylake) and 6xHDD? At the moment i am on DS918+ but i see there are so many new models supported by redpill. Should i migrate to other one? ex DS362xsp? Will DS1621p work with Intel CPU?
-
which redpill-loader will be the best choice for i5-6500t (skylake)? At the moment i am on DS918+ but i see there are new models supported by redpill. Should i migrate to other one?
-
@pocopico can you skip checking extension in build process if they are already downloaded? When i add my own module manually by "./rploader ext command" (atlantic.ko for example) or run "./rploader ext [...] auto" first, then build process failed because "module already exists".
PS inhttps://github.com/pocopico/rp-ext/blob/main/atlantic/rpext-index.json
"ds3622xs_42218" should be "ds3622xsp_42218" and in atlantic-4.4.180plus-broadwellnk.tgz file is missing crc-itu-t.ko module so in
https://github.com/pocopico/rp-ext/blob/main/atlantic/releases/ds3622xsp_42218.json
i had to remove line #20
"crc-itu-t.ko": "",
-
but your module is working fine (i can load it manually but i cannot (dont know how) load it at boot)
When i compile new redpill loader (even using yours tinycore), then synology assisntant detect my NAS as "not installed". But is detected so yours atlantic module works. So why DSM doesn`t see previous instalation (even migradable) and want to make a fresh one?
-
1 minute ago, pocopico said:
Are you looking after 918 platform ?
what do you mean?
-
atlantic module is working (i tested @pocopico and compiled myself new one). The problem is how to force it to load at boot:
1) copying to /usr/lib/modules + load file in /usr/lib/mobules-load.d doesn`t work
2) compile new redpill loader with build-in atlantic module is not a solution for me because after boot DSM wants to make a fresh instalation and i dont know why.
-
i`m using plex so h/w transcoding is required. I`m happy with using DS918+. All i need is switch my old 10gigs card (tn40xx) to new one (atlantic). At the moment i have to use build-in e1000e.
-
15 minutes ago, Peter Suh said:
Is there a reason
yes, it does
-
is there any way to load new kernel module on boot without recompile redpill-load? I need atlantic.ko. I tried copy module to /usr/lib/modules and create load file in /usr/lib/modules-load.d but after reboot module is not loaded.
-
Was made some big changes in redpill-loader in last few months? I have Baremetal DS918+ with redpill 7.0.1 compiled in October from @jumkey develop branch. All works fine but now i need to change mu 10GbE Ethernet card so i need to add new module (already using tn40xx but need atlantic). So yesterday i compiled new redpill-loader from jumkey`s sources. Baremetal was detected by Synology Assistant but as "Not installed!!" Not even "Migradable" but as new one and creator wants to format all my drives.
I tried @pocopico`s tinycore but result was the same.
Any advice how can i make new redpill image which will not requires new DSM instalation.
-
On 2/3/2022 at 2:25 PM, Hackaro said:
as we share the same Baremetal Hardware, could you be so kind to give details of your red-pill 7.0.1u2 make process? Thanks!
or you can use tinycore-redpill from @pocopico
https://xpenology.club/install-dsm-7-on-baremetal-or-vm/
should be easier way to build redpill for yuor baremetal.
-
On 2/3/2022 at 2:39 PM, Amoureux said:
SW: DS918+; RedPill Loader; DSM 7.0.1-42218 Update 2
do you had to make new redpill for 42218 Update 2? Or you used the same from 42218?
-
On 12/10/2021 at 6:08 PM, aportnov said:
Is it possible to make the correct processor mapping? The old ch_cpuinfo script does not work.
LANG.txt 1.97 kB · 6 downloads ch_cpuinfo 41.71 kB · 6 downloads
the latest version is working fine
-
1 hour ago, devid79 said:
i tested same error
try this one: add to extra_cmdline
"DiskIdxMap": "00", "SataPortMap": "4", "SasIdxMap": "0" -
i already have my xpenology as
33 minutes ago, pocopico said:Can you please try using the extension instead ? The link is below :
https://raw.githubusercontent.com/pocopico/rp-ext/master/tn40xx/rpext-index.json
i don`t have 10gbit network plugged into NAS at the moment but compiled new redpill with your extension and module loaded correct, so should works
root@nas:~# dmesg | grep tn40 [ 26.040363] tn40xx: Tehuti Network Driver, 0.3.6.17.2 [ 26.045541] tn40xx: Supported phys : MV88X3310 QT2025 TLK10232 AQR105 MUSTANG root@nas:~#-
1
-
-
https://github.com/pocopico/4.4.180plus-modules/blob/main/tn40xx.ko
this module is broken (cannot load by modules.conf.d). I attached once again a working one.
Best Regards
-
compiled once again with CROSS_COMPILE
make -C /usr/src/module_compile/tn40xx-driver-vendor-drop-v0.3.6.17.2 EXPECTED_KDIR=/usr/src/module_compile/DSM-7.0-toolkit/build CROSS_COMPILE=/usr/src/module_compile/x86_64-pc-linux-gnu/bin/x86_64-pc-linux-gnu- MV88X3310=YES QT=YES TL=YES AQ=YES MUSTANG=YESand now it works!!
shibby@nas:~$ dmesg | grep tn40xx [ 27.203540] tn40xx: Tehuti Network Driver, 0.3.6.17.2 [ 27.203541] tn40xx: Supported phys : MV88X3310 QT2025 TLK10232 AQR105 MUSTANG [ 27.203567] tn40xx 0000:01:00.0: enabling device (0000 -> 0002) [ 27.203638] tn40xx: srom 0x0 HWver 16 build 0 lane# 4 max_pl 0x1 mrrs 0x2 [ 27.420101] tn40xx: PHY detected on port 0 ID=2B09AB - MV88X3310 (A1) 10Gbps 10GBase-T [ 27.420102] tn40xx: PHY type by svid 0 found 4 [ 30.530192] tn40xx: MV88X3310 initdata applied [ 30.534741] tn40xx: MV88X3310 I/D version is 0.3.4.0 [ 30.727831] tn40xx: fw 0xe [ 30.730552] tn40xx: eth0, Port A [ 30.733811] tn40xx: 1 1fc9:4027:1432:8104 [ 30.737845] tn40xx: detected 1 cards, 1 loaded [ 170.919776] tn40xx: eth0 Link Up 10G
-
1
-
-
10 minutes ago, pocopico said:
Can you share the compilation process you used ? I'm very curious why it failed
sources:
https://github.com/acooks/tn40xx-driver/tree/vendor-drop/v0.3.6.17.2missing file
i use toolkit-dev7 to compile (ds.apollolake-7.0.dev.txz)
make -C /usr/src/module_compile/tn40xx-driver-vendor-drop-v0.3.6.17.2 EXPECTED_KDIR=/usr/src/module_compile/DSM-7.0-toolkit/build MV88X3310=YES QT=YES TL=YES AQ=YES MUSTANG=YESdone
-
@pocopico i need your advise. I successful compiled latest tn40xx driver with added MV88X3310 support (module in attachment). I copied module to /usr/lib/modules. Module works:
root@nas:~# modprobe tn40xx root@nas:~# #dmesg [ 353.114733] tn40xx: Tehuti Network Driver, 0.3.6.17.2 [ 353.119815] tn40xx: Supported phys : MV88X3310 QT2025 TLK10232 AQR105 MUSTANG [ 353.127276] tn40xx 0000:01:00.0: enabling device (0000 -> 0002) [ 353.133276] tn40xx: srom 0x0 HWver 16 build 0 lane# 4 max_pl 0x1 mrrs 0x2 [ 353.352584] tn40xx: PHY detected on port 0 ID=2B09AB - MV88X3310 (A1) 10Gbps 10GBase-T [ 353.360511] tn40xx: PHY type by svid 0 found 4 [ 356.485600] tn40xx: MV88X3310 initdata applied [ 356.490121] tn40xx: MV88X3310 I/D version is 0.3.4.0 [ 356.683372] tn40xx: fw 0xe [ 356.686080] tn40xx: eth1, Port A [ 356.689315] tn40xx: 1 1fc9:4027:1432:8104 [ 356.693323] tn40xx: detected 1 cards, 1 loadedNow i want to load module automatically with DSM start, so i made file /usr/lib/modules-load.d/70-network-0100-tn40xx.conf
tn40xxbut after reboot module is not loaded
root@nas:~# dmesg | grep tn40xx [ 30.401708] tn40xx: Unknown rela relocation: 4What can i do to fix it?
-
@pocopico i finally compile tn40xx myself and it works
[ 2273.598415] tn40xx: Tehuti Network Driver, 0.3.6.14.1 [ 2273.603509] tn40xx: Supported phys : MV88X3120 MV88X3310 [ 2273.609313] tn40xx 0000:01:00.0: enabling device (0000 -> 0002) [ 2273.615302] tn40xx: srom 0x0 HWver 16 build 0 lane# 4 max_pl 0x1 mrrs 0x2 [ 2273.834763] tn40xx: PHY detected on port 0 ID=2B09AB - MV88X3310 (A1) 10Gbps 10GBase-T [ 2273.842690] tn40xx: PHY type by svid 0 found 4 [ 2276.955878] tn40xx: MV88X3310 firmware code is running [ 2276.961112] tn40xx: MV88X3310 FW version is 0.2.8.0 [ 2277.154530] tn40xx: fw 0xe [ 2277.157252] tn40xx: eth1, Port A [ 2277.160496] tn40xx: 1 1fc9:4027:1432:8104 [ 2277.164519] tn40xx: detected 1 cards, 1 loadedMain problem was in sources. Only the oldest one (v0.3.6.14.1) supports vendor MV88X3310. All newer doesn`t
[ 158.836678] tn40xx: Tehuti Network Driver, 0.3.6.17.2 [ 158.841745] tn40xx: Supported phys : QT2025 TLK10232 AQR105 MUSTANGI will try backport MV88X3310 to the latest sources because on 6.2.3 with extras it`s working
6.2.3 with extras [ 21.455402] tn40xx: Tehuti Network Driver, 0.3.6.17.2 [ 21.460489] tn40xx: Supported phys : MV88X3120 MV88X3310 MV88E2010 QT2025 TLK10232 AQR105 MUSTANG [ 21.469635] tn40xx: srom 0x0 HWver 16 build 0 lane# 4 max_pl 0x0 mrrs 0x2 [ 21.689198] tn40xx: PHY detected on port 0 ID=2B09AB - MV88X3310 (A1) 10Gbps 10GBase-T [ 21.697107] tn40xx: PHY type by svid 0 found 4 [ 24.948258] tn40xx: MV88X3310 initdata applied [ 24.952777] tn40xx: MV88X3310 I/D version is 0.3.4.0 [ 25.145958] tn40xx: fw 0xe [ 25.148678] tn40xx: eth0, Port A [ 25.151911] tn40xx: 1 1fc9:4027:1432:8104 [ 25.155919] tn40xx: detected 1 cards, 1 loaded [ 30.585590] tn40xx: eth0 Link Up 10G-
1
-
-
12 minutes ago, dpruim said:
after 56% it give me an error saying: Faile to install the file. The file is probably corrupted.
wrong VID:PID of USB flashdrive
-
21 minutes ago, pocopico said:
OK, my fault, used wrong compiler version, can you re-download and try again ?
Link is the same? Because i have the same error
root@nas:/volume1/dane# rm tn40xx.ko root@nas:/volume1/dane# wget https://github.com/pocopico/4.4.180plus-modules/raw/main/tn40xx.ko --2021-10-07 11:00:11-- https://github.com/pocopico/4.4.180plus-modules/raw/main/tn40xx.ko Resolving github.com... 140.82.121.4 Connecting to github.com|140.82.121.4|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://raw.githubusercontent.com/pocopico/4.4.180plus-modules/main/tn40xx.ko [following] --2021-10-07 11:00:11-- https://raw.githubusercontent.com/pocopico/4.4.180plus-modules/main/tn40xx.ko Resolving raw.githubusercontent.com... 185.199.111.133, 185.199.108.133, 185.199.109.133, ... Connecting to raw.githubusercontent.com|185.199.111.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 6150984 (5.9M) [application/octet-stream] Saving to: 'tn40xx.ko' tn40xx.ko 100%[========================================================================>] 5.87M 32.6MB/s in 0.2s 2021-10-07 11:00:12 (32.6 MB/s) - 'tn40xx.ko' saved [6150984/6150984] root@nas:/volume1/dane# insmod /volume1/dane/tn40xx.ko insmod: ERROR: could not insert module /volume1/dane/tn40xx.ko: Unknown symbol in module #dmesg [ 1807.238227] tn40xx: Unknown symbol __fentry__ (err 0) [ 1807.243326] tn40xx: Unknown symbol __stack_chk_fail (err 0) [ 1807.248927] tn40xx: Unknown symbol pv_irq_ops (err 0) [ 1807.254011] tn40xx: Unknown symbol _raw_spin_unlock (err 0) [ 1807.259608] tn40xx: Unknown symbol alloc_pages_current (err 0) -
12 minutes ago, pocopico said:
It not in the kernel tree, had to download and compile, nevertheless you can try
Can you try : https://github.com/pocopico/4.4.180plus-modules/raw/main/tn40xx.ko
root@nas:~# insmod /volume1/dane/tn40xx.ko insmod: ERROR: could not insert module /volume1/dane/tn40xx.ko: Unknown symbol in module #dmesg [ 115.098302] tn40xx: Unknown symbol __fentry__ (err 0) [ 115.103362] tn40xx: Unknown symbol __stack_chk_fail (err 0) [ 115.108953] tn40xx: Unknown symbol pv_irq_ops (err 0) [ 115.114019] tn40xx: Unknown symbol _raw_spin_unlock (err 0) [ 115.119589] tn40xx: Unknown symbol alloc_pages_current (err 0)
RedPill - the new loader for 6.2.4 - Discussion
in Developer Discussion Room
Posted · Edited by shibby
Hi,
I need your advise. I had redpill DS918+ 7.0.1-42218 Update 2 i upgraded to 7.0.1-42218 Update 4. I thought it will be safe. Now im on "migratable" loop. Any tip how to fix it?