Ingridis13

Hi everyone! I'm sorry for disturbing you, but I have another problem with the same system: I'd change ethernet adapter to Synology E10G18-T1, and I'd changed the mac and s/n in user_config.json as well, and create image one more time. My system freezed on "starting kernel with usb boot". Could you, please, answer what can I do to fix this? Big thanks in advance! @Peter Suh @IG-88

Да, уважаемый -iliya-, у нас именно, что базы данных и куча мелких файлов-там-далее-по-тексту... Но, насколько я понимаю, ситуация от этого не легче, не так ли?

Похожая проблема... Развалился массив RAID10 и человек ещё и вынул ssd кэша-чтения записи. Потом массив пересобрался, но не видит кэш и, естественно, нет доступа к информации на массиве. Что можно сделать?

Hei, guys! Those who use HP elite 8300 platform: YOU NEED TO DISABLE AMT at BIOS!! This is root of evil! No need to shaman's dance with a tambourine!

Will answer to my question myself 😊 The problem was with disks logical geometry: LSI 1064E had truncated my disks to 2Gb and SAS2008 was unable to read the right geometry. Disks was re-initialized with easeUS soft and after this operation -- RAID10 was SUCCESSFUL!!

Добрый день, друзья! Подскажите, пожалуйста, контроллер Adaptec ASR3405 шьётся ли в IT-моде? А то всё время получаю сообщение о том, что отсутствуют диски... Соответственно, установить DSM (6.2.3 Update 3 образ 3615sx MBR) не получается. Заранее спасибо за ответ!

I tried LSI SAS2008 and normally process of install 6.2.3 was completed. But when I try to create RAID10 (or just Basic) on disk that number is more than 6, I have message "System Failed to create storage pool" Whats the problem?

And may be you can point for me some kind of 6-SATA (or more...8, 10, 12) AHCI adapters? What kind of chip I must find? ASM1061 is only 2, ASM1064 is only 4, may it be ASM1068, ASM1812? Thanks a lot for your kindly answers!

I found the problem: my LSI MegaRAID 1064E work at IR-mode instead of IT. And it seems that this thing can't work with >=3Tb disks. 😪 Does anyone know: will the SAS2008 or SAS2308 work with 3Tb Toshiba SATA disks and 6.2.3 Update 3? @Peter SuhCould you, please, answer? Thanks in advance for the answer! P.S. FW of 1064E is ver 1.29.00.00-IR

Dear Gentlemans! Could you please answer what kind of problem may it be: I have succesefully installed with Jun's 1.03b 6.2.3 Update 3, but WD Red 3Tb disks visible only like 2Tb's. Whats matter? How it can be heal? Sorry for dumb question, if it really dumb!..

Thank you very much for the solution, Peter!!

Peter you are my HERO! It WORKS! When I had download .pat from Synology -- normal process passed! I thinked that I need download .pat from tmp-folder, because I read that kind of instruction a couple of months before (with RedPill 0.4.4 and DSM 7.0.1) Thanks a lot once again for you help and great patience!!! Btw, I can't see 2 of my SSD (for cache) at DSM -- only 4 HDD online. Is it possible to diagnose and heal this?

Thanks, Peter! It works fine for a while... Build was passed normally, and I see my NAS at network very well, BUT... install process failed on 55% (Can't install DSM... The file is probably corrupt.). Could you please make any advices? P.S. .pat was downloaded by me from /home/tc/redpill-load/cache/

And I have bspatch-error with 7.1.0-42661 too...😪 This is forward log:

Thanks, Peter! I tried with another NICs: 1) Broadcom 2) Intel (2-ports). Could you please take a look on my another log?

Here you are! Thanks!!

First of all, thanks a lot for your answer, Peter! Actually, I'm not very familar with Linux, sorry I still learning to work with it. Could you, please, make a little bit tip for me, how I can install igc correctly? And I have problem with bspath on v.0.8.0.0 ("Couldn't find bspath in your $PATH")... Could you please make this question some clearer to me? Thanks in advance!

Hi, Gentlemans! I'm really sorry, but have some troubles with the Gigabyte B560I AORUS PRO AX + i5-11400 + 64Gb DDR4 (2x32) Try a lot of variants, but I have ethernet link only before I had created loader. After reboot it is no link at all. Try with 2-ports Intel Network Card: partially success with 3617sx, looks like DSM is installed correctly, but after reboot and "10 minutes" it says about migration. And so in the cycle. Could you please help me? lspci -nnq 00:00.0 Host bridge [0600]: Intel Corporation Device [8086:4c53] (rev 01) 00:02.0 VGA compatible controller [0300]: Intel Corporation RocketLake-S GT1 [UHD Graphics 730] [8086:4c8b] (rev 04) 00:14.0 USB controller [0c03]: Intel Corporation Tiger Lake-H USB 3.2 Gen 2x1 xHCI Host Controller [8086:43ed] (rev 11) 00:14.2 RAM memory [0500]: Intel Corporation Tiger Lake-H Shared SRAM [8086:43ef] (rev 11) 00:16.0 Communication controller [0780]: Intel Corporation Tiger Lake-H Management Engine Interface [8086:43e0] (rev 11) 00:17.0 SATA controller [0106]: Intel Corporation Device [8086:43d2] (rev 11) 00:1b.0 PCI bridge [0604]: Intel Corporation Device [8086:43c4] (rev 11) 00:1c.0 PCI bridge [0604]: Intel Corporation Tiger Lake-H PCI Express Root Port#5 [8086:43bc] (rev 11) 00:1c.5 PCI bridge [0604]: Intel Corporation Device [8086:43bd] (rev 11) 00:1c.6 PCI bridge [0604]: Intel Corporation Device [8086:43be] (rev 11) 00:1d.0 PCI bridge [0604]: Intel Corporation Tiger Lake-H PCI Express Root Port#9 [8086:43b0] (rev 11) 00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:4387] (rev 11) 00:1f.3 Audio device [0403]: Intel Corporation Tiger Lake-H HD Audio Controller[8086:43c8] (rev 11) 00:1f.4 SMBus [0c05]: Intel Corporation Tiger Lake-H SMBus Controller [8086:43a3] (rev 11) 00:1f.5 Serial bus controller [0c80]: Intel Corporation Tiger Lake-H SPI Controller [8086:43a4] (rev 11) 03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller I225-V[8086:15f3] (rev 03) 04:00.0 Network controller [0280]: Intel Corporation Wi-Fi 6 AX200 [8086:2723] (rev 1a) VERY big thanks in advance! @Peter Suh@pocopico

I'm really sorry, but have some troubles with the Gigabyte B560I AORUS PRO AX + i5-11400 + 64Gb DDR4 (2x32) Try a lot of variants, but I have ethernet link only before I had created loader. After reboot it is no link at all. Try with 2-ports Intel Network Card: partially success with 3617sx, looks like DSM is installed correctly, but after reboot and "10 minutes" it says about migration. And so in the cycle. Could you please help me? lspci -nnq 00:00.0 Host bridge [0600]: Intel Corporation Device [8086:4c53] (rev 01) 00:02.0 VGA compatible controller [0300]: Intel Corporation RocketLake-S GT1 [UHD Graphics 730] [8086:4c8b] (rev 04) 00:14.0 USB controller [0c03]: Intel Corporation Tiger Lake-H USB 3.2 Gen 2x1 xHCI Host Controller [8086:43ed] (rev 11) 00:14.2 RAM memory [0500]: Intel Corporation Tiger Lake-H Shared SRAM [8086:43ef] (rev 11) 00:16.0 Communication controller [0780]: Intel Corporation Tiger Lake-H Management Engine Interface [8086:43e0] (rev 11) 00:17.0 SATA controller [0106]: Intel Corporation Device [8086:43d2] (rev 11) 00:1b.0 PCI bridge [0604]: Intel Corporation Device [8086:43c4] (rev 11) 00:1c.0 PCI bridge [0604]: Intel Corporation Tiger Lake-H PCI Express Root Port#5 [8086:43bc] (rev 11) 00:1c.5 PCI bridge [0604]: Intel Corporation Device [8086:43bd] (rev 11) 00:1c.6 PCI bridge [0604]: Intel Corporation Device [8086:43be] (rev 11) 00:1d.0 PCI bridge [0604]: Intel Corporation Tiger Lake-H PCI Express Root Port#9 [8086:43b0] (rev 11) 00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:4387] (rev 11) 00:1f.3 Audio device [0403]: Intel Corporation Tiger Lake-H HD Audio Controller[8086:43c8] (rev 11) 00:1f.4 SMBus [0c05]: Intel Corporation Tiger Lake-H SMBus Controller [8086:43a3] (rev 11) 00:1f.5 Serial bus controller [0c80]: Intel Corporation Tiger Lake-H SPI Controller [8086:43a4] (rev 11) 03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller I225-V[8086:15f3] (rev 03) 04:00.0 Network controller [0280]: Intel Corporation Wi-Fi 6 AX200 [8086:2723] (rev 1a) VERY big thanks in advance!

Hi, Gentlemans! I'm really sorry, but have some troubles with the Gigabyte B560I AORUS PRO AX + i5-11400 + 64Gb DDR4 (2x32) Try a lot of variants, but I have ethernet link only before I had created loader. After reboot it is no link at all. Try with 2-ports Intel Network Card: partially success with 3617sx, looks like DSM is installed correctly, but after reboot and "10 minutes" it says about migration. And so in the cycle. Could you please help me? lspci -nnq 00:00.0 Host bridge [0600]: Intel Corporation Device [8086:4c53] (rev 01) 00:02.0 VGA compatible controller [0300]: Intel Corporation RocketLake-S GT1 [UHD Graphics 730] [8086:4c8b] (rev 04) 00:14.0 USB controller [0c03]: Intel Corporation Tiger Lake-H USB 3.2 Gen 2x1 xHCI Host Controller [8086:43ed] (rev 11) 00:14.2 RAM memory [0500]: Intel Corporation Tiger Lake-H Shared SRAM [8086:43ef] (rev 11) 00:16.0 Communication controller [0780]: Intel Corporation Tiger Lake-H Management Engine Interface [8086:43e0] (rev 11) 00:17.0 SATA controller [0106]: Intel Corporation Device [8086:43d2] (rev 11) 00:1b.0 PCI bridge [0604]: Intel Corporation Device [8086:43c4] (rev 11) 00:1c.0 PCI bridge [0604]: Intel Corporation Tiger Lake-H PCI Express Root Port#5 [8086:43bc] (rev 11) 00:1c.5 PCI bridge [0604]: Intel Corporation Device [8086:43bd] (rev 11) 00:1c.6 PCI bridge [0604]: Intel Corporation Device [8086:43be] (rev 11) 00:1d.0 PCI bridge [0604]: Intel Corporation Tiger Lake-H PCI Express Root Port#9 [8086:43b0] (rev 11) 00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:4387] (rev 11) 00:1f.3 Audio device [0403]: Intel Corporation Tiger Lake-H HD Audio Controller[8086:43c8] (rev 11) 00:1f.4 SMBus [0c05]: Intel Corporation Tiger Lake-H SMBus Controller [8086:43a3] (rev 11) 00:1f.5 Serial bus controller [0c80]: Intel Corporation Tiger Lake-H SPI Controller [8086:43a4] (rev 11) 03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller I225-V[8086:15f3] (rev 03) 04:00.0 Network controller [0280]: Intel Corporation Wi-Fi 6 AX200 [8086:2723] (rev 1a) VERY big thanks in advance!