Spats

When I boot without 10gb nic card installed I get an ip. When i boot with card installed I get no ip, even in the router. I rebuilt the loader with card installed in case there was something missing mate

This is the full build with the 10gb Nic card installed. cheers guys TCRP_10gb build.txt

login as: Spats Spats@192.168.1.xxx's password: Synology strongly advises you not to run commands as the root user, who has the highest privileges on the system. Doing so may cause major damages to the system. Please note that if you choose to proceed, all consequences are at your own risk. Spats@Andy:~$ cat /var/log/jun* cat: '/var/log/jun*': No such file or directory Spats@Andy:~$ sudo cat /var/log/jun* We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. Password: cat: '/var/log/jun*': No such file or directory Spats@Andy:~$ cat /var/log/linu* cat: '/var/log/linu*': No such file or directory Spats@Andy:~$ lsmod |grep -i ixg ixgbevf 60183 0 ixgbe 280488 0 vxlan 32687 1 ixgbe Spats@Andy:~$ lsmod |grep -i ig backlight 6155 2 i915,video igb 176108 0 Spats@Andy:~$ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:11:32:8f:b5:40 brd ff:ff:ff:ff:ff:ff inet 192.168.1.68/24 brd 192.168.1.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::211:32ff:fe8f:b540/64 scope link valid_lft forever preferred_lft forever 3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 link/sit 0.0.0.0 brd 0.0.0.0 Spats@Andy:~$ I dont have the 10gb card in yet, as i will not get an ip, will try again tho.

ok Peter thanks again for trying to get this to work much appreciated. give me a shout if you need to test anything.

I know it takes time mate and thanks goes to you and the guys working behind the scenes to get things going, but i will perceiver and test myself as well mate

what i can do is disable the onboard lan and see if it picks up the 10gb nic

so your saying that the 10gb nic will not function with 7.1

yes its an intel 1gb internal nic for pc. the intel 10gb nic is an addon hence the reason for the 3 macs in the grub.cfg in 6.2.3

i haven't tested when you gave the commands mate

router does not give an ip when the 10gb nic is in mate, i have to take NIC out to get an ip.

tc@box:~$ ll ./redpill-load/c*/e* total 4 -rw-r--r-- 1 tc staff 920 May 11 15:44 REALLY_README.txt drwxr-sr-x 2 tc staff 60 May 11 15:44 pocopico.ixgbevf/ drwxr-sr-x 2 tc staff 60 May 11 15:44 pocopico.r8169/ tc@box:~$ tc@box:~$ wget https://github.com/PeterSuh-Q3/tinycore-redpill/raw/mai Connecting to github.com (140.82.121.4:443) wget: server returned error: HTTP/1.1 404 Not Found tc@box:~$ n/my.sh.gz

tc@box:~$ wget https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz ; tar -zxvf my.sh.gz; Connecting to github.com (140.82.121.4:443) Connecting to raw.githubusercontent.com (185.199.109.133:443) saving to 'my.sh.gz' my.sh.gz 100% |********************************| 3786 0:00:00 ETA 'my.sh.gz' saved my.sh tc@box:~$ tc@box:~$ wget https://github.com/PeterSuh-Q3/tinycore-redpill/raw/mai n/my.sh.gz -sh: tc@box:~$: not found tc@box:~$ ; tar -zxvf my.sh.gz; -sh: syntax error: unexpected ";" tc@box:~$ Connecting to github.com (140.82.121.4:443) -sh: syntax error: unexpected "(" tc@box:~$ Connecting to raw.githubusercontent.com (185.199.109.133:443) -sh: syntax error: unexpected "(" tc@box:~$ saving to 'my.sh.gz' -sh: saving: not found tc@box:~$ my.sh.gz 100% |********************************| 3786 0:00:00 ETA -sh: my.sh.gz: not found -sh: custom-module: not found -sh: 3786: not found tc@box:~$ 'my.sh.gz' saved -sh: my.sh.gz: not found tc@box:~$ my.sh -sh: my.sh: not found tc@box:~$ tc@box:~$ -sh: tc@box:~$: not found tc@box:~$ tc@box:~$ tc@box:~$ wget https://github.com/PeterSuh-Q3/tinycore-redpill/raw/mai -sh: tc@box:~$: not found tc@box:~$ n/my.sh.gz -sh: n/my.sh.gz: not found tc@box:~$ -sh: tc@box:~$: not found -sh: -sh:: not found tc@box:~$ tc@box:~$ ; tar -zxvf my.sh.gz; -sh: tc@box:~$: not found my.sh tc@box:~$ -sh: syntax error: unexpected ";" -sh: -sh:: not found tc@box:~$ tc@box:~$ Connecting to github.com (140.82.121.4:443) -sh: syntax error: unexpected "(" tc@box:~$ -sh: syntax error: unexpected "(" -sh: -sh:: not found tc@box:~$ tc@box:~$ Connecting to raw.githubusercontent.com (185.199.109.133:443) -sh: syntax error: unexpected "(" tc@box:~$ -sh: syntax error: unexpected "(" -sh: -sh:: not found tc@box:~$ tc@box:~$ saving to 'my.sh.gz' -sh: tc@box:~$: not found tc@box:~$ -sh: saving: not found -sh: -sh:: not found tc@box:~$ tc@box:~$ my.sh.gz 100% |********************************| 3786 0:0 0:00 ETA -sh: tc@box:~$: not found -sh: custom-module: not found -sh: 3786: not found tc@box:~$ -sh: my.sh.gz: not found -sh: -sh:: not found tc@box:~$ -sh: custom-module: not found -sh: -sh:: not found tc@box:~$ -sh: 3786: not found -sh: -sh:: not found tc@box:~$ tc@box:~$ 'my.sh.gz' saved -sh: tc@box:~$: not found tc@box:~$ -sh: my.sh.gz: not found -sh: -sh:: not found tc@box:~$ tc@box:~$ my.sh -sh: tc@box:~$: not found tc@box:~$ -sh: my.sh: not found -sh: -sh:: not found tc@box:~$ tc@box:~$ tc@box:~$ -sh: tc@box:~$: not found tc@box:~$ -sh: tc@box:~$: not found -sh: -sh:: not found tc@box:~$ tc@box:~$ -sh: tc@box:~$: not found tc@box:~$

tc@box:~$ ll total 2168 lrwxrwxrwx 1 root staff 18 May 11 14:37 custom-module -> /mnt/sdc3/auxfiles -rw-r--r-- 1 tc staff 33840 May 11 11:43 custom_config.json -rw-r--r-- 1 tc staff 3026 May 11 11:43 ds1621p.dts -rw-r--r-- 1 tc staff 2423 May 11 11:43 ds920p.dts -rw-r--r-- 1 tc staff 150200 May 11 11:43 dtc -rw-r--r-- 1 tc staff 5692 May 11 11:43 global_config.json -rw-r--r-- 1 tc staff 81845 May 11 14:37 modules.alias.3.json -rw-r--r-- 1 tc staff 1628600 May 11 14:37 modules.alias.4.json drwxr-sr-x 2 tc staff 140 May 11 14:35 old/ drwxr-sr-x 9 tc staff 340 May 11 14:37 redpill-lkm/ drwxr-sr-x 23 tc staff 680 May 11 14:38 redpill-load/ -rw-r--r-- 1 tc staff 216702 May 11 11:43 rpext-index.json -rwx------ 1 tc staff 78809 May 11 11:43 rploader.sh -rw-r--r-- 1 tc staff 431 May 11 11:43 user_config.json tc@box:~$ total 2168 -sh: total: not found tc@box:~$ lrwxrwxrwx 1 root staff 18 May 11 14:37 custom-module -> /mnt/sd c3/auxfiles -sh: can't create /mnt/sdc3/auxfiles: Is a directory tc@box:~$ -rw-r--r-- 1 tc staff 33840 May 11 11:43 custom_config.json -sh: -rw-r--r--: not found tc@box:~$ -rw-r--r-- 1 tc staff 3026 May 11 11:43 ds1621p.dts -sh: -rw-r--r--: not found tc@box:~$ -rw-r--r-- 1 tc staff 2423 May 11 11:43 ds920p.dts -sh: -rw-r--r--: not found tc@box:~$ -rw-r--r-- 1 tc staff 150200 May 11 11:43 dtc -sh: -rw-r--r--: not found tc@box:~$ -rw-r--r-- 1 tc staff 5692 May 11 11:43 global_config.json -sh: -rw-r--r--: not found tc@box:~$ -rw-r--r-- 1 tc staff 81845 May 11 14:37 modules.alias.3.json -sh: -rw-r--r--: not found tc@box:~$ -rw-r--r-- 1 tc staff 1628600 May 11 14:37 modules.alias.4.json -sh: -rw-r--r--: not found tc@box:~$ drwxr-sr-x 2 tc staff 140 May 11 14:35 old/ -sh: drwxr-sr-x: not found tc@box:~$ drwxr-sr-x 9 tc staff 340 May 11 14:37 redpill-lkm/ -sh: drwxr-sr-x: not found tc@box:~$ drwxr-sr-x 23 tc staff 680 May 11 14:38 redpill-load/ -sh: drwxr-sr-x: not found tc@box:~$ -rw-r--r-- 1 tc staff 216702 May 11 11:43 rpext-index.json -sh: -rw-r--r--: not found tc@box:~$ -rwx------ 1 tc staff 78809 May 11 11:43 rploader.sh -sh: -rwx------: not found tc@box:~$ -rw-r--r-- 1 tc staff 431 May 11 11:43 user_config.json -sh: -rw-r--r--: not found tc@box:~$

version: 0.7.0.7 Peter and thanks for your help.

./redpill-load directory permission denied ./redpill-load/c*/e* permission denied strange tc@box:~$ ll ./redpill-load/c*/e* total 4 -rw-r--r-- 1 tc staff 920 May 11 14:37 REALLY_README.txt drwxr-sr-x 3 tc staff 80 May 11 14:38 pocopico.ixgbe/ drwxr-sr-x 3 tc staff 80 May 11 14:38 pocopico.r8169/ drwxr-sr-x 3 root staff 80 May 11 14:38 thethorgroup.boot-wait/ drwxr-sr-x 3 root staff 80 May 11 14:38 thethorgroup.virtio/ tc@box:~$ ./redpill-load directory -sh: ./redpill-load: Permission denied

Yes mate, it worked ok in 6.2.3 before installing 7.1 Ttyd is just flashing on screen, using WinSCP but no junior_reason in var/log.

Yes mate Intel 1gbe port, so that makes the 3 mac addresses added to the user_config.json before building.

yes i did mate, was just checking, i did get to load with the 10gbe connected but when i rebooted it didn't come back. still working on it tho lol cheers bud

@pocopico would adding 3 mac addresses in the user_config.json cause a problem mate, as i used to put the 3 macs in the grub.cfg in 6.2.3. cheers bud

Thanks mate, yes its for transcoding and works well in 6.2.3, will give it a try mate cheers

Hi, Trying to install 7.1 from 6.2.3 but i get no ip with my 10gbe card installed. is there drivers i can install when making tcrp build on usb stick, as this is the only way i can get an ip if i take the Intel X520-2 10gbe card out. Pocopico has been trying to help here https://xpenology.com/forum/topic/61547-no-ip-with-tcrp-046-img-loader cheers guys

Still working on it, Nightmare When i pull the Intel X520-2 i can get an IP got apollolake-7.1.0-42661 up and running on baremetal. When i put the X520-2 back in i loose the connection altogether. when I set manually i get an IP address. I am at a lose as to why the 10gbe when in the machine i do not get an IP until i take it out. the 10gbe card works ok in the machine with V6.2.3 but refuses to work with 7.1.0 Cheers Pocopico for your help bud, thanks

Managed to set it manually mate thanks, what next and how do i get the drivers for the Intel X520-2. sorry about holding my hand never done this, noob to linux. cheers mate

Thanks Pocopico, DS918+ running 6.2.3 on baremetal my working machine. I have the original Serial and Mac Addresses from original DS918+. what i am trying to do is setup TCRP DS918+ v7.0.1-42218 on same PC with empty drives, with adding the same serial and mac addresses from the original DS918+ in the grub cfg. just like in 6.2.3. This is all i get with tinycore-redpill-uefi.v0.4.6.img as you can see there is no IP to do the setup proccess. Cheers