Onknight

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 7.1.1-42692 Update 5 - Loader version and model : Automated RedPill Loader ARPL 1.1-beta2a - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL -Intel Zeon Dell T1100 - Additional comments: Updated via DSM GUI

Has anyone tried to use Sabrent USB 3.2 5-Bay 3.5" SATA Hard Drive Tray-Less Docking Station (DS-SC5B) as Storage I was thinking this could be great for guys with two bay nas

This is what I took out I don't know anything about flashing and it mode I have standard 5 IDE ports and I'm using all five right now I have an IDE card I'm going to install I actually have this card up for sale because I have no use for it

Okay so I'm already thinking ahead My old case server case Antec P183 had tons of room but it's falling apart The Del case is fine for now but I want to eventually get a case that can contain 12 swappable Bays Doing a search on line has left little to be excited at so far a Antec P101 Silent Performance has 11 bays is the best I can . 9 Front bays and 2 SSD in the rear. I'm using all five SATA ports on the original board I have SATA where are four ports work that gets me up to 9 And I'll have to find a second card to add the other three ports to get me up to 12

I am thinking of adding X540T1 X540-T1 to my DS3622xs+. I see a X40t2 is tested I am good to go ?

Question are Nic Cards that work out of box to get 10 Gbps on my Xpenology nas Thinking of upgrading to Cat 7 Cables my work is getting point i need to able to move files quickly

My only concern now is 7.2 is on the way And I'm wondering it will be ready so our systems can keep going This particular version of software is just so user-friendly I tried truenas and I hated it it's not user-friendly at all And I don't like openmediavault either

Will that's nice about this one. it was not cobbled together out of Scraps it made it simple The last Computer was Core 2 Duo with 4 gigs of ram and bunch hard drives after a while I lost use to onboard SATA and hard use a SATA Card and NIC Card it was just time to start over

I haven't been here in a while But my xpenology Gave up the ghost and Brought a Dell PowerEdge T110 Server Tower I ended up removing the SAS card and just using SATA Following the instructions from this youtube Vid Was able to Get the Dell Running fine on 7.1 Thank to everyone who help with this hobbie

is there anyway to block the updates Till we have a solution to for them to install correctly I'm still on 6.2.3-25426 Update 3 It keeps sending Messages to update Phone every few hours .. Annoying as hell

Hey everybody I might be able to get my hands on a DELL PowerEdge 2900 server Has anyone used one of these cuz I can pick it up pretty cheap

@ig88 Yes but I goofed the original motherboard model I give you is not the motherboard I actually have When I went into the bios for my board I saw the correct model number I then did a Google search and found the manual it does not the ability ahci it was not included in the Bios I even Flash the BIOS to the newest version I search the Manual Yes some board in PB5-VM Series to have AHCI but SE Model is not one ... This is PB5-VM SE motherboard unfortunately Manual.pdf

I gave you wrong Model of motherboard P5B-VM SE came out around 2007 is the correct Model Unfortunally desktop Intel chipsets ICH9 and less are not supporting AHCI mode.Only ICH10 and some ICH9 supports it (P35 chipset). I not found the switching option for AHCI, so the mb doesn't support AHCI. @IG-88

@ig88 Unfortunally desktop Intel chipsets ICH9 and less are not supporting AHCI mode.Only ICH10 and some ICH9 supports it (P35 chipset). I not found the switching option for AHCI, so this mb doesn't support AHCI. so I am out luck unless you guys have any ideas

Motherboard is this PB5-VM SE dose not have ACHI mode bit they may be a solution I've included the link https://www.bios-mods.com/forum/Thread-Asus-P5B-VM-SE

I looked into Setting it old core 2 Dual Motherboard m3n78-vm and looks like dose not have ACHI mode http://static.highspeedbackbone.net/pdf/(e3849)_m3n78-vm.pdf Manual for the board @IG-88

Agreed but it a option

I had an idea and I wanted to run it by the group Has anyone ever used an Intel crypto mining board how to make a server With all the extra PCI Lanes you could you Serial SATA cards amount the maximum number of drives

Has anyone used one of these pcie splitter cards with success If they have I'm considering going this direction for future expansion My current board only has two pci-e ports and they are both occupied One contains my Serial ATA card and the other is use for my Nic card

Asus Motherboard m3n78-vm for SATA Ports .. For DS3615XS using bootloader synoboot_3615 Jun's Loader v1.03b My SATA Cardworks but OS dose not see the Onboard SATA

I did major upgrade and changed loaders. And motherboard is an NVIDIA chipset don't like like they are supported my SATA card is working but losing 4 Good SATA Onboard ports sucks could use some help here @IG-88 or anyone who has solution for me would be appreciated Thank you again for this great community in advance

Thanks @flyride done

is there a way someone could a video tutorial on how to do this Unfortunately I'm a visual learner and I don't pick up things well unless it's in a video format Thanks in advance

I would love to run Active Backup for Business but I see we're being froze out Is there something similar I could run that would do a closed job