NiGGaZ
Transition Member-
Posts
14 -
Joined
-
Last visited
-
Days Won
1
Everything posted by NiGGaZ
-
Comparing Read/Write speed between DS1019+ (chinese, repacked) and DS918+ (from this forum loaders). Hardware: ASUS N3150M-E, Lan: Realtek 8111H, SSD: Samsung 128Gb (Sata 3Gbps). File: approx. 2,52 GB img Strange, but DS1019+ (W: ~63-65 Mb/s, R: ~66-67 Mb/s) copying faster then DS918+ (W: ~50-58 Mb/s, R: ~60-62 Mb/s). Checked on another HDD WD 1Tb: DS1019+ (W: ~39-45 Mb/s, R: ~40-47 Mb/s) copying faster then DS918+ (W: ~30-36 Mb/s, R: ~36-38 Mb/s). Maybe someone can explain why it so!? DS918+ Wrinting (SSD Samsung 128Gb) DS918+ Reading (SSD Samsung 128Gb) DS1019+ Wrinting (SSD Samsung 128Gb) DS1019+ Reading (SSD Samsung 128Gb)
-
I tried to load another version of realtek drivers, but there was some version differences of kernel. Yes, I've removed too. Because for me it's not necessary, I got only 2 sata ports. (Sorry if removed) I've interested to maintain. From the beginning of lockdown I used extra2 made for 6.2.2, but currently loaded 6.2.3 and it works fine! You're right about kernel, I've tried to compile kernel from sourceforge, but results wasn't good.
-
Hi IG-88 I will try to send more information later, but I've just re-packed extra. And additioanlly prepared loader, you can find it by link https://mega.nz/file/ESw1lCIK#_RIGEaKHXn5loScfmAnkyEjHczSVv_v3xE5wr9K0HT0 And you right it's based on QQ124718842. Currently I'm testing, and most of performance looks better.
-
Hi. I've prepared extra.lzma based on Juns patch and Custom loader for DS1019+ for DSM 6.2.3-25426, link below: https://mega.nz/file/pao0CQrb#_pLGNjTl-f7eneoWQgDkPklDoRCyqxJ_vhx_d79kIKg (only extra.lzma ~ 5.7Mb) You can find loader for DS1019+ on this forum or another place, you can remove both extra files from partition and use re-compiled. Then you need to download PAT files from https://archive.synology.com/download/DSM/release/6.2.3/25426/DSM_DS1019+_25426.pat, and just replace zImage and rd.gz Tested on ASUS N3150M-E (Lan: Realtek 8111H) and it works better then on loader for DS918+ (including extra)
-
- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 6 - Loader version and model: Jun's v1.04b - DS918+ - Using custom extra.lzma: Repacked extra.lzma (based on Jun's Extra 918+ v0.8 syno) - Installation type: BAREMETAL - ASUS N3150M-E rev. 1.02 (MicroATX) / Removed 16 disks support, MB equipped only 2 x 6Gb SATA - Additional comment: WOL works only if use native MAC address.
-
Привет. Вот только что установил и обновил до актуальной DSM 6.2.2-24922 Update 6. Сразу оговорюсь, что 918+ никак не идет, диск теряет при обновлении. Устанавливал (for DS3615xs) - v1.03b (extra) и обязательно прописывал загрузочную запись как гибридная.
-
Why I’m asking, because I’ve updated my HP Compaq Elite 8300 CMT to 6.2.2, but that was not so smooth. 😁
-
Enjoy! What hardware are you use?
-
Really useful!
-
Synology DSM 6.1 (xpenology) Lets Encrypt ACMEv1 to ACMEv2 If you get messages like: synoscgi_SYNO.Core.Certificate.LetsEncrypt_1_create[5038]: certificate.cpp:957 syno-letsencrypt failed. 200 [new-req, unexpect httpcode] synoscgi_SYNO.Core.Certificate.LetsEncrypt_1_create[5038]: certificate.cpp:1359 Failed to create Let'sEncrypt certificate. [200][new-req, unexpect httpcode] Then you need to upgrade your DSM up to version 6.2 or replace execution (syno-letsencrypt) file and some changes in configuarion file: 1. Download file syno-letsencrypt (this file from DSM v6.2) link https://drive.google.com/drive/folders/1-LgjOAU3dBtNk2WKZ1KJY88Lklf12RPp?usp=sharing 2. If not enabled SSH, please enable in settings 3. Copy downloaded file syno-letsencrypt in any folder on you NAS 4. Connect to NAS with SSH (Putty) using admin account 5. Make backup of original syno-letsencrypt (sudo cp /usr/syno/sbin/syno-letsencrypt usr/syno/sbin/syno-letsencrypt.bck) 6. Copy downloaded syno-letsencrypt file to directory /usr/syno/sbin/ (ex.: sudo cp /volume1/sharedFolder/syno-letsencrypt /usr/syno/sbin/) 7. Change attributes (sudo chmod 755 /usr/syno/sbin/syno-letsencrypt) to execute new file 8. Now change default address for syno-letsencrypt, using ssh (sudo vi /usr/syno/etc.defaults/letsencrypt/letsencrypt.default) 9. Fine string "server": "https://acme-v01.api.letsencrypt.org/directory", press i and change 01 to 02 10. Press escape, enter :wq and reboot your NAS.
-
text.txt