diqipib
-
Posts
29 -
Joined
-
Last visited
Posts posted by diqipib
-
-
@pmchan, thanks for the answer ! Yes, I did it, but forgot to mention it in a topic. Unfortunatly U r right - there is no any info about imagick in phpinfo log. Even though, PHP 7.4 module has core settings:
I forgot to say that I tried to install ImageMagick package from syno community, but it still didn't help. Maybe there is some other way to activate imagick ?
-
Привет всем, дамы и господа ! Пришёл к вам с вопросом - удалось ли кому-то заставить работать расширение imagick на DSM DSM 6.1.7-15284 Update 3 ? Начну с того, что эта потребность у меня возникла так как я поднял сайт на Wordpress в Web Station. К сожалению, healthcheck сайта выдаёт мне сообщение о том, что рекомендуемые расширения не установлены и в списке указывает imagick.
Скрытый текст
Поискав в инете я нашёл несколько обсуждений на эту тему:
https://community.synology.com/enu/forum/1/post/128164
Это привело меня к инструкции:
https://mariushosting.com/how-to-add-php-imagick-extension-on-synology-nas/
В конце говорится, что "PHP 7.4 Is Out Today with imagick extension support"
Я решил попробовать поставить PHP 7.4. Разумеется он сообщил, что моя версия DSM его не поддерживает. Решил, провести эксперимент. Я выкачал PHP 7.4 в виде spk (
https://www.synology.com/en-us/support/download/DS3615xs#packages
альтернатива: https://archive.synology.com/download/Package/PHP7.4/7.4.9-0005
), открыл его через 7z архиватор и поправил в файле INFO строку
firmware="6.1.7-15284"После этого пакет успешно установился. Я увидел, что в настройках PHP 7.4 присутствует пункт imagick, включил его, но сайт Wordpress всё равно выдаёт сообщение, что расширение не установлено.
Есть ли способ заставить его работать ?
-
Hello everyone, ladies and gentlemen! Came to you with a question - did someone get php imagick extention to work on DSM DSM 6.1.7-15284 Update 3 ? To begin with, this need it as I started a site on Wordpress in Web Station. After that I found a message in site health check, that imagick extension is not installed.
Searching the internet, I found several discussions:
https://community.synology.com/enu/forum/1/post/128164
This led me to the instruction:
https://mariushosting.com/how-to-add-php-imagick-extension-on-synology-nas/
It says at the end that "PHP 7.4 is out today with support for the Imagick extension."
I decided to try to install PHP 7.4. Of course DSM said that my version 6.1.7 does not support it. I decided to make an experiment.
1) downloaded PHP 7.4 as spk (https://www.synology.com/en-us/support/download/DS3615xs#packages alternative link: https://archive.synology.com/download/Package/PHP7.4/7.4.9-0005
2) opened it with 7z and corrected the line in the INFO file
firmware = "6.1.7-15284"After that it installed successfully. I saw that the imagick item was present in the PHP 7.4 settings.
I turned it on, but the Wordpress site still displays a message that the extension is not installed, even after system reboot.
Don't You know - is there a way to make it work ?
-
@luchuma, shame on me, shame! I was sure I did it. But no ! I open the image and see all 3 boot options are on. Left only vmware and everything worked. Thank you very much for your help and patience! 😔
-
Thanks for Your reply. I attached config screenshot and wmx file.
Скрытый текст
-
Hi guys. I got an issue with installing DSM 6.2 in ESXI 6.5. DSM starts normaly, but when I try to upload "DSM_DS3615xs_23739.pat" it says:
Скрытый текст[H[J[1;1H[?25l[m[H[J[1;1H[2;20HGNU GRUB version 2.02~beta2-36ubuntu3.14
[m[4;2H+----------------------------------------------------------------------------+[5;2H|[5;79H|[6;2H|[6;79H|[7;2H|[7;79H|[8;2H|[8;79H|[9;2H|[9;79H|[10;2H|[10;79H|[11;2H|[11;79H|[12;2H|[12;79H|[13;2H|[13;79H|[14;2H|[14;79H|[15;2H|[15;79H|[16;2H|[16;79H|[17;2H+----------------------------------------------------------------------------+[m[18;2H[19;2H[m Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line. [5;80H [7m[5;3H*DS3615xs 6.2 Baremetal with Jun's Mod v1.03b [m[5;78H[m[m[6;3H DS3615xs 6.2 Baremetal with Jun's Mod v1.03b Reinstall [m[6;78H[m[m[7;3H DS3615xs 6.2 VMWare/ESXI with Jun's Mod v1.03b [m[7;78H[m[m[8;3H [m[8;78H[m[m[9;3H [m[9;78H[m[m[10;3H [m[10;78H[m[m[11;3H [m[11;78H[m[m[12;3H [m[12;78H[m[m[13;3H [m[13;78H[m[m[14;3H [m[14;78H[m[m[15;3H [m[15;78H[m[m[16;3H [m[16;78H[m[16;80H [5;78H[22;1H The highlighted entry will be executed automatically in 1s. [5;78H[22;1H The highlighted entry will be executed automatically in 0s. [5;78H[?25h[H[J[1;1H[H[J[1;1H[H[J[1;1H[H[J[1;1Hpatching file etc/rc
patching file etc/synoinfo.conf
patching file linuxrc.syno
patching file usr/sbin/init.post
START /linuxrc.syno
Insert basic USB modules...
:: Loading module usb-common ... [ OK ]
:: Loading module usbcore ... [ OK ]
:: Loading module ehci-hcd ... [ OK ]
:: Loading module ehci-pci ... [ OK ]
:: Loading module ohci-hcd ... [ OK ]
:: Loading module uhci-hcd ... [ OK ]
:: Loading module xhci-hcd ... [ OK ]
:: Loading module usb-storage ... [ OK ]
:: Loading module BusLogic ... [ OK ]
:: Loading module vmw_pvscsi ... [ OK ]
:: Loading module megaraid_mm ... [ OK ]
:: Loading module megaraid_mbox ... [ OK ]
:: Loading module megaraid ... [ OK ]
:: Loading module scsi_transport_spi ... [ OK ]
:: Loading module mptbase ... [ OK ]
:: Loading module mptscsih ... [ OK ]
:: Loading module mptspi ... [ OK ]
:: Loading module mptsas ... [ OK ]
:: Loading module mptctl ... [ OK ]
:: Loading module megaraid_sas ... [ OK ]
:: Loading module mpt2sas ... [ OK ]
:: Loading module mpt3sas ... [ OK ]
Insert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
All disk ready or timeout execeed
Partition Version=0
Partition layout is not DiskStation style.
NOT EXECUTE /sbin/e2fsck.
Mounting /dev/md0 /tmpRoot
mount: lseek failed, msg:Invalid argument
mount: mounting /dev/md0 on /tmpRoot failed: No such device
mount /dev/md0 fail, returns
Exit on error [3] no init exists...
Sat Nov 21 15:06:01 UTC 2020
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=1014200k,nr_inodes=253550,mode=755 0 0
proc /proc proc rw,relatime 0 0
linuxrc.syno failed on 3
starting pid 5427, tty '': '/etc/rc'
:: Starting /etc/rc
:: Mounting procfs ... [ OK ]
:: Mounting tmpfs ... [ OK ]
:: Mounting devtmpfs ... [ OK ]
:: Mounting devpts ... [ OK ]
:: Mounting sysfs ... [ OK ]
mdadm: error opening /dev/md1: No such file or directory
rc: Use all internal disk as swap.
rc: No assigned swap disk (sda2) can be assembled, use all instead.
rc: Use all internal disk as swap.
rc: No disk (sda2) can be assembled.
swapon: can't stat '/dev/md1': No such file or directory
:: Loading module sg ... [ OK ]
:: Loading module mdio ... [ OK ]
:: Loading module fat ... [ OK ]
:: Loading module vfat ... [ OK ]
:: Loading module ip_tunnel ... [ OK ]
:: Loading module vxlan ... [ OK ]
:: Loading module dca ... [ OK ]
:: Loading module e1000e ... [ OK ]
:: Loading module i2c-algo-bit ... [ OK ]
:: Loading module igb ... [ OK ]
:: Loading module ixgbe ... [ OK ]
:: Loading module r8168 ... [ OK ]
:: Loading module libcrc32c ... [ OK ]
:: Loading module mii ... [ OK ]
:: Loading module libphy ... [ OK ]
:: Loading module atl1 ... [ OK ]
:: Loading module atl1e ... [ OK ]
:: Loading module atl1c ... [ OK ]
:: Loading module alx ... [ OK ]
:: Loading module uio ... [ OK ]
:: Loading module ipg ... [ OK ]
:: Loading module jme ... [ OK ]
:: Loading module skge ... [ OK ]
:: Loading module sky2 ... [ OK ]
:: Loading module ptp_pch ... [ OK ]
:: Loading module pch_gbe ... [ OK ]
:: Loading module qla3xxx ... [ OK ]
:: Loading module qlcnic ... [ OK ]
:: Loading module qlge ... [ OK ]
:: Loading module netxen_nic ... [ OK ]
:: Loading module sfc ... [ OK ]
:: Loading module e1000 ... [ OK ]
:: Loading module pcnet32 ... [ OK ]
:: Loading module vmxnet3 ... [ OK ]
:: Loading module bnx2 ... [ OK ]
:: Loading module bnx2x ... [ OK ]
:: Loading module cnic ... [FAILED]
:: Loading module r8169 ... [ OK ]
:: Loading module tg3 ... [ OK ]
:: Loading module usbnet ... [ OK ]
:: Loading module ax88179_178a ... [ OK ]
:: Loading module button ... [ OK ]
:: Loading module synobios ... [ OK ]
udhcpc (v1.16.1) started
eth0 Link encap:Ethernet HWaddr 00:11:32:52:E8:2D
inet addr:192.168.2.22 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1140 (1.1 KiB) TX bytes:1480 (1.4 KiB)
Interrupt:18 Memory:fd4a0000-fd4c0000lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B):: Starting syslogd ... [ OK ]
:: Starting scemd
:: Starting services in background
Starting findhostd in flash_rd...
Starting services in flash_rd...
Running /usr/syno/etc/rc.d/J01httpd.sh...
Starting httpd:80 in flash_rd...
Starting httpd:5000 in flash_rd...
Running /usr/syno/etc/rc.d/J03ssdpd.sh...
/usr/bin/minissdpd -i eth0
(15): upnp:rootdevice
(51): uuid:upnp_SynologyNAS-00113252e82d::upnp:rootdevice
(56): Synology/synology_bromolow_3615xs/6.2-23739/192.168.2.22
(45): http://192.168.2.22:5000/description-eth0.xml
Connected.
done.
/usr/syno/bin/reg_ssdp_service 192.168.2.22 00113252e82d 6.2-23739 synology_bromolow_3615xs eth0
Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh...
Starting synoagentregisterd...
Running /usr/syno/etc/rc.d/J30DisableNCQ.sh...
Running /usr/syno/etc/rc.d/J80ADTFanControl.sh...
Running /usr/syno/etc/rc.d/J98nbnsd.sh...
Starting nbnsd...
Running /usr/syno/etc/rc.d/J99avahi.sh...
Starting Avahi mDNS/DNS-SD Daemon
cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf
:: Loading module hid ... [ OK ]
:: Loading module usbhid ... [ OK ]
============ Date ============
Sat Nov 21 15:06:18 UTC 2020
==============================
starting pid 7215, tty '': '/sbin/getty 115200 console'Sat Nov 21 15:06:19 2020
DiskStation login:As I see, this issue happens when second disk is too small. I use 100GB vdisk. So I still can't find the answer, what am I doing wrong.
-
В 05.02.2020 в 18:34, Florin lupu сказал:
Hi, i used the tutorial and set the virtual machine but i cannot find the virtual machine over network and also in ESX is set the network to E1000e but there is no network information.
Any ideas?
Thank you
Hmm ... My ESXI doesn't show ip either, but the virtual machine is working nonetheless. I found ip by looking into the web interface of the router.
Скрытый текст
-
@luchuma GREAT THANKS MAN ! 😳😳😳
I really wonder myself how I could be so careless! I recreated a virtual machine 5 times and every time I got the same result ! Shaaaame on me !
Скрытый текст
-
Thank's for the answer. 🙂
I checked my "pat" file md5. Redownloaded it again from server. As I see, it's md5 are equal.
md5: 57748c2d9bed639403fca13de64eba03 *DSM_DS3615xs_23739.pat
And as I see on server there is md5 for this file - https://archive.synology.com/download/DSM/release/6.2/23739/DSM_DS3615xs_23739.pat.md5
So my file "pat" file looks correct.
Please, can You inform me what vm config should I show ? I have several files:
Скрытый текст
I attached XPEnology.vmx. If other files are required, please inform me.
Скрытый текст
-
Good afternoon. Please tell me why during installation I constantly get an error of 13
Скрытый текст
? I try to install DSM 6.2.2 (tried with DSM_DS3615xs_23739.pat / DSM_DS3615xs_24922.pat) on ESXI 6.0. I searched in a subject and in the Internet. Everywhere they write that this is due to the incorrectly set VID and PID. But the topic header does not indicate a change in VID and PID, and in theory should they be set in the VMDK file? I upload it to ESXI without changes. But after starting the virtual machine, its contents are constantly changing! Namely, the CID and db.longContentID are changing. What am I doing wrong ?
P.S That's what I see in changed vmdk:
Скрытый текст
-
@flyride , yes, of course you are right ! In the end, I can even get the certificate artificially and install it with the same DSM functionality, but the fact is that the old version of DSM 5.1.7 is slowly starting to get glitches, because Synology stops supporting it and the built-in functionality stops working. So, something else may "fall off" tomorrow and no one will fix it. It makes me sad. In addition, an alternative way to obtain a certificate is more time consuming. And DSM for me is in simplicity and convenience. If I have to use an alternative, then it already makes sense to abandon DSM in favor of other solutions. Maybe I'm wrong, but I see it like this. 😏
-
By the way, I forgot to clarify. I felt the need to switch to 6.2.2, because in 6.1.7, even with update 3, the DSM functionality for receiving letsencrypt certificate stopped working for me. In a loop, it reports an error and offers to log into DSM.
-
@IG-88 Thank you so much for such a detailed answer! Now the reason is clear. So I have to either buy a SATA controller, or use alternatives like FreeNAS. It's a pity. Loved the beautiful design of XPenology. ) Although, I will try to write Jun. Maybe he could offer an option.
-
@bearcat, I used dmesg with su rights.
"dmesg | grep SATA" returns this:
Цитата[ 2.785339] ata1: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[ 2.785342] ata2: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
Maybe it can help ? Any ideas ? )Below is the full result of dmesg:
Скрытый текст[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.102 (root@build1) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #15284 SMP Sat May 19 04:16:44 CST 2018
[ 0.000000] Command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=XXXXXXXXXXXX mac1=YYYYYYYYYYYY mac2=YYYYYYYYYYYY mac3=YYYYYYYYYYYY mac4=YYYYYYYYYYYY netif_num=4 vid=0x13fe pid=0x3e00
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf5dffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf5e0000-0x00000000cf5e2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf5e3000-0x00000000cf5effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cf5f0000-0x00000000cf5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. G31M-ES2L/G31M-ES2L, BIOS FI 08/09/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CAFFF write-protect
[ 0.000000] CB000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0CF800000 mask FFF800000 uncachable
[ 0.000000] 4 base 0CF700000 mask FFFF00000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 130000000 mask FF0000000 uncachable
[ 0.000000] 7 base 0CF600000 mask FFFF00000 uncachable
[ 0.000000] e820: update [mem 0xcf600000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcf5e0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f53c0-0x000f53cf] mapped at [ffff8800000f53c0]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01ab6000, 0x01ab6fff] PGTABLE
[ 0.000000] BRK [0x01ab7000, 0x01ab7fff] PGTABLE
[ 0.000000] BRK [0x01ab8000, 0x01ab8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
[ 0.000000] BRK [0x01ab9000, 0x01ab9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[ 0.000000] [mem 0x12c000000-0x12fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcf5dffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcf3fffff] page 2M
[ 0.000000] [mem 0xcf400000-0xcf5dffff] page 4k
[ 0.000000] RAMDISK: [mem 0x37062000-0x37828fff]
[ 0.000000] ACPI: RSDP 0x00000000000F6DB0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 0x00000000CF5E3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 0x00000000CF5E30C0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 0x00000000CF5E3180 040E8 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 0x00000000CF5E0000 00040
[ 0.000000] ACPI: HPET 0x00000000CF5E73C0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 0x00000000CF5E7440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 0x00000000CF5E7480 0625A (v01 GBT GBT B0 5455312E BG?? 00020101)
[ 0.000000] ACPI: APIC 0x00000000CF5E72C0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 0x00000000CF5EDD40 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcf5dffff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1045886
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11557 pages used for memmap
[ 0.000000] DMA32 zone: 845280 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf5e0000 - 00000000cf5e3000
[ 0.000000] PM: Registered nosave memory: 00000000cf5e3000 - 00000000cf5f0000
[ 0.000000] PM: Registered nosave memory: 00000000cf5f0000 - 00000000cf600000
[ 0.000000] PM: Registered nosave memory: 00000000cf600000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] e820: [mem 0xcf600000-0xdfffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff88012fc00000 s69376 r8192 d20736 u524288
[ 0.000000] pcpu-alloc: s69376 r8192 d20736 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031564
[ 0.000000] Kernel command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=XXXXXXXXXXXX mac1=YYYYYYYYYYYY mac2=YYYYYYYYYYYY mac3=YYYYYYYYYYYY mac4=YYYYYYYYYYYY netif_num=4 vid=0x13fe pid=0x3e00
[ 0.000000] Power on seq num: 0
[ 0.000000] Synology Hardware Version: DS3615xs-j
[ 0.000000] Vender format version: 2
[ 0.000000] Serial Number: XXXXXXXXXXXX
[ 0.000000] Mac1: YYYYYYYYYYYY
[ 0.000000] Mac2: YYYYYYYYYYYY
[ 0.000000] Mac3: YYYYYYYYYYYY
[ 0.000000] Mac4: YYYYYYYYYYYY
[ 0.000000] Internal netif num: 4
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Memory: 4032436k/4980736k available (4814k kernel code, 797192k absent, 151108k reserved, 3793k data, 760k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2999.886 MHz processor
[ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.77 BogoMIPS (lpj=2999886)
[ 0.001007] pid_max: default: 32768 minimum: 301
[ 0.001040] Security Framework initialized
[ 0.001050] AppArmor: AppArmor initialized
[ 0.001058] Mount-cache hash table entries: 256
[ 0.001241] Initializing cgroup subsys memory
[ 0.001257] Initializing cgroup subsys devices
[ 0.001259] Initializing cgroup subsys freezer
[ 0.001261] Initializing cgroup subsys blkio
[ 0.001286] CPU: Physical Processor ID: 0
[ 0.001287] CPU: Processor Core ID: 0
[ 0.001288] mce: CPU supports 6 MCE banks
[ 0.001294] CPU0: Thermal monitoring enabled (TM2)
[ 0.001300] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.001353] Freeing SMP alternatives: 24k freed
[ 0.001362] ACPI: Core revision 20130328
[ 0.002775] ACPI: All ACPI Tables successfully acquired
[ 0.003409] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.013498] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (fam: 06, model: 0f, stepping: 0b)
[ 0.014000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.014000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.014000] ... version: 2
[ 0.014000] ... bit width: 40
[ 0.014000] ... generic registers: 2
[ 0.014000] ... value mask: 000000ffffffffff
[ 0.014000] ... max period: 000000007fffffff
[ 0.014000] ... fixed-purpose events: 3
[ 0.014000] ... event mask: 0000000700000003
[ 0.014000] smpboot: Booting Node 0, Processors #1
[ 0.025033] Brought up 2 CPUs
[ 0.025037] smpboot: Total of 2 processors activated (11999.54 BogoMIPS)
[ 0.026057] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.027041] devtmpfs: initialized
[ 0.027175] PM: Registering ACPI NVS region [mem 0xcf5e0000-0xcf5e2fff] (12288 bytes)
[ 0.027175] xor: measuring software checksum speed
[ 0.036672] prefetch64-sse: 13060.000 MB/sec
[ 0.046672] generic_sse: 11464.000 MB/sec
[ 0.046673] xor: using function: prefetch64-sse (13060.000 MB/sec)
[ 0.046710] NET: Registered protocol family 16
[ 0.047053] ACPI: bus type PCI registered
[ 0.047066] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.047066] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.047223] PCI: Using configuration type 1 for base access
[ 0.050027] bio: create slab <bio-0> at 0
[ 0.067007] raid6: sse2x1 gen() 5484 MB/s
[ 0.084005] raid6: sse2x1 xor() 5025 MB/s
[ 0.101009] raid6: sse2x2 gen() 5847 MB/s
[ 0.118001] raid6: sse2x2 xor() 6310 MB/s
[ 0.135007] raid6: sse2x4 gen() 8996 MB/s
[ 0.152001] raid6: sse2x4 xor() 6970 MB/s
[ 0.152002] raid6: using algorithm sse2x4 gen() (8996 MB/s)
[ 0.152003] raid6: .... xor() 6970 MB/s, rmw enabled
[ 0.152004] raid6: using ssse3x2 recovery algorithm
[ 0.152020] ACPI: Added _OSI(Module Device)
[ 0.152021] ACPI: Added _OSI(Processor Device)
[ 0.152022] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.152024] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.152475] ACPI: EC: Look up EC in DSDT
[ 0.154770] ACPI BIOS Bug: Warning: Incorrect checksum in table [TAMG] - 0x32, should be 0x31 (20130328/tbutils-320)
[ 0.154849] ACPI: SSDT 0x00000000CF5ED720 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.154960] ACPI: Dynamic OEM Table Load:
[ 0.154962] ACPI: SSDT 0x0000000000000000 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.155033] ACPI: SSDT 0x00000000CF5EDBE0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.155135] ACPI: Dynamic OEM Table Load:
[ 0.155137] ACPI: SSDT 0x0000000000000000 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.155237] ACPI: Interpreter enabled
[ 0.155248] ACPI: (supports S0 S4 S5)
[ 0.155249] ACPI: Using IOAPIC for interrupt routing
[ 0.155283] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.155283] ACPI: No dock devices found.
[ 0.159101] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.159173] PCI host bridge to bus 0000:00
[ 0.159173] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.159173] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.159173] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.159173] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.159173] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.159173] pci_bus 0000:00: root bus resource [mem 0xcf600000-0xfebfffff]
[ 0.159173] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.159173] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
[ 0.159173] pci 0000:00:02.0: reg 10: [mem 0xfdf00000-0xfdf7ffff]
[ 0.159173] pci 0000:00:02.0: reg 14: [io 0xff00-0xff07]
[ 0.159173] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.159173] pci 0000:00:02.0: reg 1c: [mem 0xfde00000-0xfdefffff]
[ 0.159173] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.159173] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.159173] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.160014] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.160044] pci 0000:00:1d.0: reg 20: [io 0xfe00-0xfe1f]
[ 0.160092] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.160117] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.160117] pci 0000:00:1d.1: reg 20: [io 0xfd00-0xfd1f]
[ 0.160117] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.160117] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.160117] pci 0000:00:1d.2: reg 20: [io 0xfc00-0xfc1f]
[ 0.160117] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.160117] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.160117] pci 0000:00:1d.3: reg 20: [io 0xfb00-0xfb1f]
[ 0.160117] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.160117] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.160117] pci 0000:00:1d.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.160121] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.160138] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.160138] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.160138] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.160138] pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00000400-0x00000403 flags 0x80000000]
[ 0.160138] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.160138] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.160138] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.160158] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.160158] pci 0000:00:1f.2: reg 10: [io 0xf700-0xf707]
[ 0.160158] pci 0000:00:1f.2: reg 14: [io 0xf600-0xf603]
[ 0.160158] pci 0000:00:1f.2: reg 18: [io 0xf500-0xf507]
[ 0.160158] pci 0000:00:1f.2: reg 1c: [io 0xf400-0xf403]
[ 0.160158] pci 0000:00:1f.2: reg 20: [io 0xf300-0xf30f]
[ 0.160158] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.161013] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.161049] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.161176] pci 0000:01:00.0: [1186:4300] type 00 class 0x020000
[ 0.161176] pci 0000:01:00.0: reg 10: [io 0xce00-0xceff]
[ 0.161176] pci 0000:01:00.0: reg 18: [mem 0xfdbff000-0xfdbfffff 64bit]
[ 0.161176] pci 0000:01:00.0: reg 20: [mem 0xfdafc000-0xfdafffff 64bit pref]
[ 0.161176] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.161176] pci 0000:01:00.0: supports D1 D2
[ 0.161176] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.163013] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.163018] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.163022] pci 0000:00:1c.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.163027] pci 0000:00:1c.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.163060] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.163060] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.163060] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.163061] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.163063] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.163065] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.163068] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.163070] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.163072] pci 0000:00:1e.0: bridge window [mem 0xcf600000-0xfebfffff] (subtractive decode)
[ 0.163081] pci_bus 0000:00: on NUMA node 0
[ 0.163085] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.163087] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.163180] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.163224] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.163268] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.163310] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.163352] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.163395] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.163437] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.163479] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.163540] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.163540] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.163540] Found 1 acpi root devices
[ 0.164010] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.164013] vgaarb: loaded
[ 0.164014] vgaarb: bridge control possible 0000:00:02.0
[ 0.164061] SCSI subsystem initialized
[ 0.164061] ACPI: bus type ATA registered
[ 0.164061] libata version 3.00 loaded.
[ 0.164061] pps_core: LinuxPPS API ver. 1 registered
[ 0.164061] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.164061] PTP clock support registered
[ 0.164061] PCI: Using ACPI for IRQ routing
[ 0.168776] PCI: pci_cache_line_size set to 64 bytes
[ 0.168802] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.168805] e820: reserve RAM buffer [mem 0xcf5e0000-0xcfffffff]
[ 0.168817] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.169021] Switching to clocksource hpet
[ 0.169064] AppArmor: AppArmor Filesystem Enabled
[ 0.169093] pnp: PnP ACPI init
[ 0.169097] ACPI: bus type PNP registered
[ 0.169194] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.169197] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.169199] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.169201] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.169203] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.169205] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.169215] pnp 00:01: [dma 4]
[ 0.169244] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.169323] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.169372] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.169406] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.169444] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.169530] pnp 00:06: [dma 2]
[ 0.169571] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.169740] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.169914] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.170036] system 00:09: [io 0x0400-0x04cf] could not be reserved
[ 0.170039] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.170200] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.170202] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.170348] system 00:0b: [mem 0x000cd000-0x000cffff] has been reserved
[ 0.170350] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.170353] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.170354] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.170356] system 00:0b: [mem 0xcf5e0000-0xcf5fffff] could not be reserved
[ 0.170358] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.170360] system 00:0b: [mem 0x00100000-0xcf5dffff] could not be reserved
[ 0.170362] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.170364] system 00:0b: [mem 0xfed13000-0xfed1dfff] has been reserved
[ 0.170366] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.170369] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.170371] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.170373] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.170375] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[ 0.170377] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.170424] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.170429] pnp: PnP ACPI: found 13 devices
[ 0.170430] ACPI: bus type PNP unregistered
[ 0.177965] pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
[ 0.177970] pci 0000:01:00.0: BAR 6: assigned [mem 0xfda00000-0xfda0ffff pref]
[ 0.177973] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.177975] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.177979] pci 0000:00:1c.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.177982] pci 0000:00:1c.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.177986] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.177988] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.177992] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.177995] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.178062] pci 0000:00:1e.0: setting latency timer to 64
[ 0.178065] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.178067] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.178069] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.178070] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.178072] pci_bus 0000:00: resource 8 [mem 0xcf600000-0xfebfffff]
[ 0.178074] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.178075] pci_bus 0000:01: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.178077] pci_bus 0000:01: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.178079] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.178081] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.178082] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.178084] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.178085] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.178087] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.178089] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.178090] pci_bus 0000:02: resource 8 [mem 0xcf600000-0xfebfffff]
[ 0.178121] NET: Registered protocol family 2
[ 0.178262] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.178373] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.178490] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.178515] TCP: reno registered
[ 0.178517] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.178532] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.178582] NET: Registered protocol family 1
[ 0.178651] RPC: Registered named UNIX socket transport module.
[ 0.178652] RPC: Registered udp transport module.
[ 0.178654] RPC: Registered tcp transport module.
[ 0.178655] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.178661] pci 0000:00:02.0: Boot video device
[ 0.179107] PCI: CLS 4 bytes, default 64
[ 0.179137] Trying to unpack rootfs image as initramfs...
[ 1.484824] Freeing initrd memory: 7964k freed
[ 1.497664] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.497669] software IO TLB [mem 0xcb5e0000-0xcf5e0000] (64MB) mapped at [ffff8800cb5e0000-ffff8800cf5dffff]
[ 1.507099] audit: initializing netlink socket (disabled)
[ 1.507113] type=2000 audit(1579447998.506:1): initialized
[ 1.513392] bounce pool size: 64 pages
[ 1.514578] VFS: Disk quotas dquot_6.5.2
[ 1.514596] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.515384] NFS: Registering the id_resolver key type
[ 1.515394] Key type id_resolver registered
[ 1.515395] Key type id_legacy registered
[ 1.515407] msgmni has been set to 7891
[ 1.515498] async_tx: api initialized (async)
[ 1.515551] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.515553] io scheduler noop registered
[ 1.515555] io scheduler deadline registered
[ 1.515561] io scheduler cfq registered (default)
[ 1.516086] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 2.122171] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.143749] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.143852] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
[ 2.213389] brd: module loaded
[ 2.218064] ACPI Warning: 0x0000000000000428-0x000000000000042F SystemIO conflicts with Region \GP2C 1 (20130328/utaddress-249)
[ 2.218072] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.218075] Unknown LPC device 27b8
[ 2.221141] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.225684] Loading iSCSI transport class v2.0-870.
[ 2.249060] rdac: device handler registered
[ 2.264106] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.298379] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 2.298382] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 2.499029] tsc: Refined TSC clocksource calibration: 2999.999 MHz
[ 2.499034] Switching to clocksource tsc
[ 2.548095] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.548194] rtc_cmos 00:03: RTC can wake from S4
[ 2.548638] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.548661] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.549530] i2c /dev entries driver
[ 2.553732] coretemp coretemp.0: Using relative temperature scale!
[ 2.553743] coretemp coretemp.0: Using relative temperature scale!
[ 2.553773] it87: Found IT8718F chip at 0x290, revision 8
[ 2.553789] it87: Beeping is supported
[ 2.557842] md: linear personality registered for level -1
[ 2.557846] md: raid0 personality registered for level 0
[ 2.557847] md: raid1 personality registered for level 1
[ 2.557848] md: raid10 personality registered for level 10
[ 2.559382] md: raid6 personality registered for level 6
[ 2.559386] md: raid5 personality registered for level 5
[ 2.559387] md: raid4 personality registered for level 4
[ 2.559389] md: raidF1 personality registered for level 45
[ 2.560630] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 2.560633] cpuidle: using governor ladder
[ 2.560635] cpuidle: using governor menu
[ 2.560701] TCP: cubic registered
[ 2.560703] NET: Registered protocol family 17
[ 2.560728] Key type dns_resolver registered
[ 2.568526] registered taskstats version 1
[ 2.570169] rtc_cmos 00:03: setting system clock to 2020-01-19 15:33:19 UTC (1579447999)
[ 2.570875] Freeing unused kernel memory: 760k freed
[ 2.571074] Write protecting the kernel read-only data: 8192k
[ 2.571188] Freeing unused kernel memory: 1320k freed
[ 2.572328] Freeing unused kernel memory: 500k freed
[ 2.614176] ACPI: bus type USB registered
[ 2.614724] usbcore: registered new interface driver usbfs
[ 2.615224] usbcore: registered new interface driver hub
[ 2.616885] usbcore: registered new interface driver ethub
[ 2.618898] usbcore: registered new device driver usb
[ 2.627084] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.630677] ehci-pci: EHCI PCI platform driver
[ 2.630773] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 2.630781] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.630787] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.634679] ehci-pci 0000:00:1d.7: cache line size of 4 is not supported
[ 2.634695] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 2.640018] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.640228] hub 1-0:1.0: USB hub found
[ 2.640232] hub 1-0:1.0: 8 ports detected
[ 2.648119] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.655083] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.655177] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.655180] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.655186] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.655209] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
[ 2.655542] hub 2-0:1.0: USB hub found
[ 2.655547] hub 2-0:1.0: 2 ports detected
[ 2.655642] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.655645] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.655649] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.655679] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
[ 2.657040] hub 3-0:1.0: USB hub found
[ 2.657046] hub 3-0:1.0: 2 ports detected
[ 2.657154] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.657156] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.657161] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.657190] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
[ 2.659242] hub 4-0:1.0: USB hub found
[ 2.659247] hub 4-0:1.0: 2 ports detected
[ 2.659351] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.659354] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.659358] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.659389] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
[ 2.662780] hub 5-0:1.0: USB hub found
[ 2.662788] hub 5-0:1.0: 2 ports detected
[ 2.704148] usbcore: registered new interface driver usb-storage
[ 2.716071] VMware PVSCSI driver - version 1.0.2.0-k
[ 2.720669] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 2.725400] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 2.740874] Fusion MPT base driver 3.04.20
[ 2.740878] Copyright (c) 1999-2008 LSI Corporation
[ 2.747479] Fusion MPT SPI Host driver 3.04.20
[ 2.752263] Fusion MPT SAS Host driver 3.04.20
[ 2.756886] Fusion MPT misc device (ioctl) driver 3.04.20
[ 2.756953] mptctl: Registered with Fusion MPT base driver
[ 2.756955] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 2.761435] ata_piix 0000:00:1f.2: version 2.13
[ 2.761510] ata_piix 0000:00:1f.2: MAP [
[ 2.761511] P0 P2 P1 P3 ]
[ 2.761536] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.769017] scsi0 : ata_piix
[ 2.772963] scsi1 : ata_piix
[ 2.774347] ata1: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[ 2.774350] ata2: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[ 2.931016] ata1: Read current link speed fail, retry 1
[ 2.942009] ata1: Read current link speed fail, retry 2
[ 2.953034] ata1: Read current link speed fail, retry 3
[ 2.974012] ata2: Read current link speed fail, retry 1
[ 2.985009] ata2: Read current link speed fail, retry 2
[ 2.996009] ata2: Read current link speed fail, retry 3
[ 3.020227] ata2.00: HPA detected: current 1953523055, native 1953525168
[ 3.020231] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
[ 3.020234] ata2.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.039222] ata2.00: configured for UDMA/133
[ 3.041020] usb 1-7: new high-speed USB device number 3 using ehci-pci
[ 3.045740] scsi 1:0:0:0: Direct-Access SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 3.046327] sd 1:0:0:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.046360] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.046363] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.046377] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.058247] sdb: sdb1 sdb2
[ 3.058956] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.069130] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
[ 3.079710] mpt2sas version 20.00.00.00 loaded
[ 3.090983] mpt3sas version 01.100.01.00 loaded
[ 3.100825] bromolow_synobios: module license 'Synology Inc.' taints kernel.
[ 3.100828] Disabling lock debugging due to kernel taint
[ 3.101473] 2020-1-19 15:33:20 UTC
[ 3.101476] synobios: load, major number 201
[ 3.101478] Brand: Synology
[ 3.101480] Model: DS-3615xs
[ 3.101482] set group disks wakeup number to 4, spinup time deno 7
[ 3.602023] synobios cpu_arch proc entry initialized
[ 3.602026] synobios crypto_hw proc entry initialized
[ 3.602028] synobios syno_platform proc entry initialized
[ 3.608541] synobios: unload
[ 3.615200] md: Autodetecting RAID arrays.
[ 3.633467] md: Scanned 2 and added 2 devices.
[ 3.633470] md: autorun ...
[ 3.633472] md: considering sdb1 ...
[ 3.633477] md: adding sdb1 ...
[ 3.633479] md: sdb2 has different UUID to sdb1
[ 3.633484] md: created md0
[ 3.633486] md: bind<sdb1>
[ 3.633498] md: running: <sdb1>
[ 3.633639] md/raid1:md0: active with 1 out of 12 mirrors
[ 3.633653] md0: detected capacity change from 0 to 2549940224
[ 3.633703] md: considering sdb2 ...
[ 3.633706] md: adding sdb2 ...
[ 3.634269] md: created md1
[ 3.634271] md: bind<sdb2>
[ 3.634278] md: running: <sdb2>
[ 3.636560] md/raid1:md1: active with 1 out of 12 mirrors
[ 3.636576] md1: detected capacity change from 0 to 2147418112
[ 3.637274] md: ... autorun DONE.
[ 3.648621] md0: unknown partition table
[ 3.712924] usb-storage 1-7:1.0: USB Mass Storage device detected
[ 3.713899] scsi2 : usb-storage 1-7:1.0
[ 3.846082] EXT4-fs (md0): barriers disabled
[ 3.858852] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[ 4.046022] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[ 4.235223] Got empty serial number. Generate serial number from product.
[ 4.720366] scsi 2:0:0:0: Direct-Access UFD 2.0 Silicon-Power4G PMAP PQ: 0 ANSI: 4
[ 4.722300] sd 2:0:0:0: [synoboot] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB)
[ 4.722881] sd 2:0:0:0: [synoboot] Write Protect is off
[ 4.722886] sd 2:0:0:0: [synoboot] Mode Sense: 23 00 00 00
[ 4.724120] sd 2:0:0:0: [synoboot] No Caching mode page found
[ 4.730001] sd 2:0:0:0: [synoboot] Assuming drive cache: write through
[ 4.742000] sd 2:0:0:0: [synoboot] No Caching mode page found
[ 4.747896] sd 2:0:0:0: [synoboot] Assuming drive cache: write through
[ 4.765895] synoboot: synoboot1 synoboot2 synoboot3
[ 4.770867] sd 2:0:0:0: [synoboot] No Caching mode page found
[ 4.776743] sd 2:0:0:0: [synoboot] Assuming drive cache: write through
[ 4.783341] sd 2:0:0:0: [synoboot] Attached SCSI removable disk
[ 11.463693] md1: unknown partition table
[ 11.489034] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
[ 13.736191] 2020-1-19 15:33:31 UTC
[ 13.736196] synobios: load, major number 201
[ 13.736200] Brand: Synology
[ 13.736202] Model: DS-3615xs
[ 13.736203] set group disks wakeup number to 4, spinup time deno 7
[ 14.237081] synobios cpu_arch proc entry initialized
[ 14.237086] synobios crypto_hw proc entry initialized
[ 14.237089] synobios syno_platform proc entry initialized
[ 14.244186] synobios: unload
[ 24.719195] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[ 25.778538] EXT4-fs (md0): re-mounted. Opts: (null)
[ 31.450721] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 31.450764] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 31.768663] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
[ 32.089929] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 32.090313] zram: Created 2 device(s) ...
[ 32.099815] Adding 1212412k swap on /dev/zram0. Priority:1 extents:1 across:1212412k SS
[ 32.108593] Adding 1212412k swap on /dev/zram1. Priority:1 extents:1 across:1212412k SS
[ 35.932262] NET: Registered protocol family 10
[ 35.958186] sit: IPv6 over IPv4 tunneling driver
[ 36.066034] init: syno-auth-check main process (5600) killed by TERM signal
[ 36.751326] ACPI: Requesting acpi_cpufreq
[ 37.341810] fuse init (API version 7.22)
[ 37.354778] dca service started, version 1.12.1
[ 37.357950] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI
[ 37.357953] e1000e: Copyright(c) 1999 - 2016 Intel Corporation.
[ 37.366196] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3
[ 37.366199] Copyright (c) 2007-2015 Intel Corporation.
[ 37.382900] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.4.6
[ 37.382903] Copyright(c) 1999 - 2016 Intel Corporation.
[ 37.382927] ixgbe unsupported_sfp_notify proc entry initialized
[ 37.409109] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 1.5.19
[ 37.409112] i40e: Copyright(c) 2013 - 2016 Intel Corporation.
[ 37.456460] tn40xx low_mem_msg proc entry initialized
[ 37.456463] tn40xx low_mem_counter proc entry initialized
[ 37.456465] tn40xx debug_msg proc entry initialized
[ 37.456466] tn40xx: Tehuti Network Driver, 0.3.6.12.3
[ 37.460349] r8168 Gigabit Ethernet driver 8.044.02-NAPI loaded
[ 37.460450] r8168 0000:01:00.0: irq 41 for MSI/MSI-X
[ 37.462273] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 37.462277] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 37.535066] qed_init called
[ 37.535069] QLogic FastLinQ 4xxxx Core Module qed 8.33.9.0
[ 37.535070] creating debugfs root node
[ 37.553553] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.33.9.0
[ 37.575846] Loading modules backported from Linux version v3.18.1-0-g39ca484
[ 37.575849] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
[ 37.614752] Compat-mlnx-ofed backport release: cd30181
[ 37.614755] Backport based on mlnx_ofed/mlnx_rdma.git cd30181
[ 37.614756] compat.git: mlnx_ofed/mlnx_rdma.git
[ 37.991217] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.00 ($DateTime: 2015/07/28 00:13:30 $)
[ 38.083066] systemd-udevd[6148]: starting version 204
[ 38.301183] bio: create slab <bio-1> at 1
[ 38.312169] Btrfs loaded
[ 38.341208] exFAT: Version 1.2.9
[ 38.616175] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 38.630027] sky2: driver version 1.30
[ 38.636836] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01
[ 38.644523] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42
[ 38.655123] QLogic/NetXen Network Driver v4.0.80
[ 38.658527] Solarflare NET driver v3.2
[ 38.661833] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 38.661835] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 38.664910] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 38.667867] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI
[ 38.676679] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
[ 38.695567] usbcore: registered new interface driver ax88179_178a
[ 38.698496] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 38.698501] ACPI: Power Button [PWRB]
[ 38.698550] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 38.698552] ACPI: Power Button [PWRF]
[ 38.848337] 2020-1-19 15:33:56 UTC
[ 38.848342] synobios: load, major number 201
[ 38.848345] Brand: Synology
[ 38.848347] Model: DS-3615xs
[ 38.848349] set group disks wakeup number to 4, spinup time deno 7
[ 39.349026] synobios cpu_arch proc entry initialized
[ 39.349030] synobios crypto_hw proc entry initialized
[ 39.349032] synobios syno_platform proc entry initialized
[ 39.819933] eth0: 0xffffc90011392000, 00:11:32:52:e8:2d, IRQ 41
[ 39.864206] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.294706] init: dhcp-client (eth0) main process (8118) killed by TERM signal
[ 42.429556] usbcore: registered new interface driver usblp
[ 42.480283] usbcore: registered new interface driver usbhid
[ 42.480287] usbhid: USB HID core driver
[ 42.489783] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input2
[ 42.489794] hid-generic 0003:045E:0780.0001: input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:1d.2-2/input0
[ 42.496332] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input3
[ 42.496338] Get empty minor:104
[ 42.496390] hid-generic 0003:045E:0780.0002: input,hiddev0: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:1d.2-2/input1
[ 42.871501] r8168: eth0: link up
[ 42.871516] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 43.999252] init: dhcp-client (eth0) main process (8568) killed by TERM signal
[ 44.366277] ata2.00: configured for UDMA/133
[ 44.366284] ata2: EH complete
[ 49.192573] iSCSI:target_core_rodsp_server.c:1021:rodsp_server_init RODSP server started, login_key(YYYYYYYYYYYY).
[ 49.206249] iSCSI:extent_pool.c:757:ep_init syno_extent_pool successfully initialized
[ 49.218915] iSCSI:target_core_device.c:571:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 49.219051] iSCSI:target_core_lunbackup.c:358:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[ 49.246379] iSCSI:target_core_file.c:92:fd_attach_hba RODSP plugin for fileio is enabled.
[ 49.246390] iSCSI:target_core_ep.c:862:ep_attach_hba RODSP plugin for epio is enabled.
[ 49.246394] iSCSI:target_core_ep.c:869:ep_attach_hba ODX Token Manager is enabled.
[ 49.539142] loop: module loaded
[ 91.658292] ata2.00: configured for UDMA/133
[ 91.658302] ata2: EH complete
[ 93.290738] init: synostoraged main process (8826) killed by USR1 signal
[ 93.290789] init: synostoraged main process ended, respawning
I replaced real sn and macs with XXXXXXXXX / YYYYYYYYYY
-
Цитата
from your post, it looked like a fresh install, using that mainboard for the first time with DSM.
U r right. My fault. ☺️
ЦитатаIf it worked with 1.02b and 6.1.x, I would assume that drivers for your SATA controller was one of many "lost" in the newer releases.
Do I understand correctly that then I have no chance to start 6.2.2 ? After all, Synology built in signing file protection and since extra.lzma from 6.2.2 doesn’t include my driver, I can't add it from another extra.lzma from previous versions, cause it has another sign that doesn't match new bootloader ? Am I wrong ?
ЦитатаDoublecheck your controllers ID and driver (with a 1.02b loader and DSM 6.1.x, using a spare HDD if you have it).
Please, can You tell me how to find controller ID ? Now I installed DSM 6.1.7-15284 again. What shall I do next ? 🙄
ЦитатаThen, try to search the "extra drivers" thread, to see if you fin it there.
It sounds like I still have chances. ))
ЦитатаTo be honest, I was sure that you needed AHCI support on any SATA controller beeing used
It's good. So life can still surprise us. 😉
-
bearcat, thanks for Your answer !
1) So the problem is in SATA controller ?
2) Hm. I checked BIOS settings. That's what I see:
Скрытый текст
3) Previously I successfully used loader 1.02b DS3615xs with DSM 6.1.7. I thought, if motherboard doesn't support AHCI, it can't run DSM at all (I mean any version of it). Am I wrong ? 🙄
-
Greetings, gentlemen. I decided that creating a new topic does not make sense if I have the same problem as the author. As I understand it, this is a fairly common situation:
Скрытый текстI read these messages, but have not yet found an answer how to solve the problem. So I'll try to give a description of my system, if more detailed information is required, I will be glad to provide it:
Processor: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2 cores)
Mother board: Gigabyte GA-G31M-ES2L
Memory: KVR667D2N5/2G (x2)I tried to install DSM 6.2.2 with loader DS3615xs 1.03b (fresh install) from this topic
As usual, I flashed the image on a USB flash drive, booted from it and through the console replaced VID and PID in GRUB.cfg.
Web interface started but I see the same picture - No Hard Disk Found on DS3615xs.
After searching the internet I found this topic.
I tried to replace extra.lzma with file from here and zImage and rd.gz from file DSM_DS3615xs_24922.pat, but still get the same result.
Tell me, please, are there any chances to start DSM 6.2.2 on my system or is there no point in trying further ?
-
den3001, вот как. Тогда вдвойне благодарю за информацию ! ) Пойду соберу DSM-ку как было и париться не буду. Как допилят, так и буду думать о переходе ). Большое спасибо !
-
2 минуты назад, den3001 сказал:
да , только UEFI
по поводу флешки, я почему так сказал? У самого такое было не видит диски хоть убей. Взял какуюто древнюю флешку сделал и все пошло. Это было на 1.03а2. Но сейчас дл 918 уже есть 1.04в вот https://mega.nz/#F!Fgk01YoT!7fN9Uxe4lpzZWPLXPMONMA
Понял. Крайне благодарен. Значит пока не судьба мне погонять новую DSM. ) Придётся затариваться новой материнкой.
-
1 час назад, den3001 сказал:
попробуй сменить флешку( другого производителя)
1.03в это только 3615 и 3617 для 918 1.03а2.
Загружать в режиме только UEFI( В биосе выставлять),
Потом ради эксперемента в режиме только Legasi попробуй
1) Да. Вы правы. Именно так. Для 918+ я использовал 1.03a2, а для 3615 и 3617 - 1.03b
2) Флешки менял уже. И причём тут они ? Ведь раз я вижу веб интерфейс, значит загрузка с флешки уже прошла успешно.
3) Так это ж древние мамки у них UEFI и не пахнет. Так что я по любому в legacy. А что - новый загрузчик только UEFI поддерживает ?
-
Господа, попробовал на двух материнках Asus P5G41T-M LX2/GB и Gigabyte GA-945GCMX-52. На новом загрузчике 1.03b всё время получаю сообщение в веб морде, что диски не найдены. На загрузчике и для 918+ модели устройство вообще в сети не появляется, а на 3615 и 3617 захожу в веб интерфейс и везде вижу сообщение с предложением переподключить диск. Подскажите пожалуйста, что я делаю не так ? Неужели в новом загрузчике нет дров под мой диск ? В старом же всё заводилось с пол пинка ?
P.S На флешке VID и PID прописаны, в BIOS режим для дисков Enchanced SATA выбран. (Пробовал выставлять IDE - разницы никакой)
-
centeredki69, hi, unfortunatly, I got the same issue with virtual manager on the same PC configuration as You. CPU: E6600 + 8GB memory.
Screenshots
Hide -
druzhynins, а VID и PID флэшки не забыли подменить в grub.cfg ?
-
Хм. Решил перед тем как затариваться валидной парой, попробовать свои силы в анализе серийников. Так получается вроде не так уж много и поменялось. Пара тройка экспериментов и в итоге успешно зарегал себе учётку. Проверил и вуаля квик коннект успешно пустил. Посмотрим на долго ли хватит такого удовольствия.
Wordpress + imagick extension on DSM DSM 6.1.7-15284 Update 3
in Third Party Packages
Posted
@flyride, thanks ! That's goot idea, but then all the charm of using DSM is lost. After all, it is the GUI interface of Web Station that makes it easy to manage PHP and extension settings. Didn't anyone else wonder about DSM-level customization? 😔