djvas335
-
Posts
161 -
Joined
-
Last visited
-
Days Won
2
Posts posted by djvas335
-
-
Please note that it was always like this, the driver integrated in loader did not work thus while compiling I had to disable the card for the loader to not detect it and not add the said problematic driver.
-
Please note the differences in driver version of original dsm and the one installed by the loader on these two screens, the 2017 one is dsm original and the 2014 one is the one installed by the loader,
-
Please note that DS3622xs+ already contains an mlx4 driver so if the problematic driver is removed from the integrated module pack it should fix the current issue, I built the loader before the integrated module pack and I had no issues such as this, by just disabling the card and reenabling it after the compilation process. Please note that if I left the card enabled, the outcome was as is now, a non working system. Also please note that the driver contained in the DS3622xs+ is more recent.
-
2 minutes ago, Peter Suh said:
What is your loader build command?
Did you build the latest version of pocopico's TCRP using the command method?
Or did you use the WEB UI builder?I use cli, my loader commands are
./rploader.sh update now
./rploader.sh fullupgrade now
./rploader.sh serialgen DS3622xs+
./rploader.sh identifyusb now
./rploader.sh satamap now
./rploader.sh build ds3622xsp-7.2.0-64561
-
And this is the screen with the card enabled but before going to the webinterface that shuts down the system
-
This is from the recently build system which does not work properly, it starts and works if I disable a card, however as soon as reenable the card, the system starts and when I go to the webinterface, the system immediately shuts down
-
23 minutes ago, Peter Suh said:
uname -a
This is from a working system using the original driver from dsm3622xs built by disabling the card and reenabling it after the build, I am rebuilding the broken system and will send screen soon
-
I attach screens from dmesg on my two systems, one with the original DSM driver and one with loader driver,please note the driver version
-
The mlx4 module is integrated in DSM3622xs, no need to install, before to use it, I just disabled the card before loader compilation as the mlx4 from the loader did not work, and I just enabled the card after, now this doesnt work
-
Thanks for your answer however I am just looking on how to remove the mlx4 driver from my loader build, the DSM has a perfectly usable driver included which works fine for my cards, also the included driver in DSM is newer.
-
Hi guys, I have several servers running mellanox connect-x 3 and the custom driver contained in the loader breaks system, before I just disabled the card slot before loader compilation so that custom driver did not install and just used the mlx4 driver included in DSM, however now the custom driver is pushed into loader and I can't seem to be able to remove it, any help on this ? This is on DSM3622xs, thanks in advance.
-
You can upgrade directly to 7.1, I did it and zero issues with current loader state
3 minutes ago, Brunox said:That's also correct what Peter wrote, but since you already have U3 installed on your Synology, you can only migrate to DS3622xs+ 7.0.1-42218U3 and that doesn't exist "officially" in TC !! That's your problem and that's why I would first change the firmware in your place that is available in TC on the DS918 and on the DS3622 and that would be either 7.1-42621 or 7.1-42661 and only then migrate the system to DS3622!
I hope I was able to explain your little problem in a reasonably understandable way
BR Brunox
-
Updates are blocked on purpose at redpill level, first its not good for custom synology to phone home and second and probably most importantly is that some smart users will configure automatic updates and will get their systems bricked.
5 hours ago, lws8964 said:I Can download package from package center but can not check update.
-
Synology discontinued USB device support from version 7
4 hours ago, mitch55 said:On my N54L, it seems to have a problem with USB drivers (or other, I'm not an expert) :
- the control panel doesn't find my bluetooth.
- And it doesn't find my inverter (eaton ellipse pro 650).
Is this working for someone?
-
2
-
It seems that some drivers are incompatible with 7.1, I had issues updating a Microserver Gen8 with a mellanox Connext x 3 shutting down after installation, so I disabled the card, built the loader so that it does not include the mellanox driver, updated and then reenabled the card, after this the system booted up with no issues
-
1
-
-
This happens when the PAT download is interrupted, you need to clean and start again
7 hours ago, carlozo said:File //mnt/sda3/auxfiles/ds3622xsp_42661.pat, is encrypted
File //mnt/sda3/auxfiles/ds3622xsp_42661.pat, has been cached but its encrypted, re-running decrypting process
Checking for cached pat file
Found tinycore cache folder, linking to home/tc/custom-module
Found locally cached pat file /home/tc/custom-module/ds3622xsp_42661.pat
File /home/tc/custom-module/ds3622xsp_42661.pat, is encrypted
Extracting encrypted pat file : /home/tc/custom-module/ds3622xsp_42661.pat to /tmp/pat
sudo: /bin/syno_extract_system_patch: command not found
extract latest pat
Creating unecrypted pat file ds3622xsp_42661.pat to /home/tc/redpill-load/cache folder
tar: ./VERSION: Not found in archive
tar: Exiting with failure status due to previous errors
Pat file sha256sum is : 4692a72c93969ff02f79453a9f8ee3ea2ff2332760b3ce32441bb798e4f72b7d
Checking config file existence -> No config file found, please use the proper repo, clean and download again
-
1
-
-
All steps are necessary for any install just to be safe, and yes you need to answer yes to any question asked, or there is no point in running the command yes ?
4 minutes ago, nemesis122 said:is this step nessesary for a fresh install 1 +2 see the list?
./rploader.sh update now
1) ./rploader.sh fullupgrade now
./rploader.sh serialgen DS3622xs+
./rploader.sh identifyusb now
./rploader.sh satamap now
2)./rploader.sh build broadwellnk-7.0.1-42218
./rploader.sh clean now
./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json
./rploader.sh build broadwellnk-7.1.0-42661
./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now;-
1
-
-
I have Microserver gen8 running on ds3622xs+ 7.1 with no issues, however my cpu is core i3, also there is one step less which I used to compile redpill for gen8
ie omit this step while building loader
./rploader.sh ext broadwellnk-7.1.0-42661 add https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json
44 minutes ago, nemesis122 said:i have now again kernel panic with Tinycore Redpill newest version and buidling 7.1.... .3622 please help is the gen8 not compatible with 3622xs ??
thank you
95.848072] RIP [<ffffffff8106de27>] kthread_data+0x7/0x10 [ 95.875538] RSP <ffff8802f5effa90> [ 95.892268] CR2: ffffffffffffffd8 [ 95.908078] ---[ end trace 736d20c1730b6c0a ]--- [ 95.930136] Fixing recursive fault but reboot is needed! [ 186.527146] NMI watchdog: Watchdog detected hard LOCKUP on cpu 0dModules linked in: broadwellnk_synobios(PO) adt7475 nfsv3 nfs lockd grace sunrpc i40e(O) r8168(O) igb(O) i2c_algo_bit e1000e(O) vfat fat sha256_generic sg ixgbe(OE) vxlan(OE) dca(OE) ip6_udp_tunnel udp_tunnel usb_storage xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O) redpill(OE) [last unloaded: broadwellnk_synobios] [ 186.527146] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P D OE 4.4.180+ #42661 [ 186.527147] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 186.527147] task: ffffffff818114c0 ti: ffffffff81800000 task.ti: ffffffff81800000 [ 186.527148] RIP: 0010:[<ffffffff8108f18d>] [<ffffffff8108f18d>] queued_spin_lock_slowpath+0x13d/0x150 [ 186.527148] RSP: 0018:ffff880309603d48 EFLAGS: 00000002 [ 186.527149] RAX: 00000000000c0101 RBX: 0000000000000292 RCX: 0000000000000101 [ 186.527149] RDX: 0000000000000101 RSI: 0000000000000001 RDI: ffff880309696340 [ 186.527150] RBP: ffff880309603d48 R08: 0000000000000001 R09: 0000000000000004 [ 186.527150] R10: 000000000000024d R11: 00000000000001ee R12: 00000000000007ba [ 186.527151] R13: 000000000000024d R14: ffff8802fb4b8360 R15: ffff880309696340 [ 186.527151] FS: 0000000000000000(0000) GS:ffff880309600000(0000) knlGS:0000000000000000 [ 186.527151] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 186.527152] CR2: 00007fdd61f429b8 CR3: 000000000180a000 CR4: 00000000001606f0 [ 186.527152] Stack: [ 186.527153] ffff880309603d60 ffffffff81563474 ffff8802fb48ec00 ffff880309603e58 [ 186.527153] ffffffff81084a47 ffff880309603e94 ffff88030960f230 0000000081076d54 [ 186.527153] ffff8802fb48f400 ffff8802fb48ec00 ffff8802fb48ec00 0000000000000000 [ 186.527154] Call Trace: [ 186.527154] <IRQ> d [<ffffffff81563474>] _raw_spin_lock_irqsave+0x24/0x30 [ 186.527155] [<ffffffff81084a47>] load_balance+0x277/0x940 [ 186.527155] [<ffffffff8108579e>] rebalance_domains+0x22e/0x2e0 [ 186.527155] [<ffffffff81085990>] run_rebalance_domains+0x140/0x1d0 [ 186.527156] [<ffffffff810552ba>] __do_softirq+0xca/0x2e0 [ 186.527156] [<ffffffff810aa21d>] ? hrtimer_interrupt+0xcd/0x180 [ 186.527157] [<ffffffff81055603>] irq_exit+0x93/0xa0 [ 186.527157] [<ffffffff81032643>] smp_apic_timer_interrupt+0x43/0x60 [ 186.527157] [<ffffffff8156459b>] apic_timer_interrupt+0x9b/0xa0 [ 186.527158] <EOI> d [<ffffffff8100d456>] ? mwait_idle+0xb6/0x190 [ 186.527158] [<ffffffff8100e020>] arch_cpu_idle+0x10/0x20 [ 186.527159] [<ffffffff8108abd8>] default_idle_call+0x28/0x30 [ 186.527159] [<ffffffff8108aef1>] cpu_startup_entry+0x311/0x320 [ 186.527160] [<ffffffff8155e50b>] rest_init+0x72/0x74 [ 186.527160] [<ffffffff818f5e55>] start_kernel+0x3e2/0x3ef [ 186.527160] [<ffffffff818f52e7>] x86_64_start_reservations+0x29/0x2b [ 186.527161] [<ffffffff818f53e2>] x86_64_start_kernel+0xf9/0x104 [ 186.527162] Code: 01 00 00 00 65 ff 0d 9f 7c f8 7e 5d c3 be 01 00 00 00 f0 0f b1 37 85 c0 0f 85 5a ff ff ff eb e4 83 fa 01 75 04 eb e4 f3 90 8b 07 <84> c0 75 f8 b8 01 00 00 00 5d 66 89 07 c3 0f 1f 44 00 00 48 c7 [ 186.527162] Sending NMI to other CPUs: [ 186.527162] NMI backtrace for cpu 1 [ 186.527163] CPU: 1 PID: 8044 Comm: hotplug Tainted: P D OE 4.4.180+ #42661 [ 186.527163] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 186.527164] task: ffff8800f033f2c0 ti: ffff8802f5cb8000 task.ti: ffff8802f5cb8000 [ 186.527164] RIP: 0010:[<ffffffff8108f114>] [<ffffffff8108f114>] queued_spin_lock_slowpath+0xc4/0x150 [ 186.527165] RSP: 0018:ffff8802f5cbbe70 EFLAGS: 00000046 [ 186.527165] RAX: 0000000000000000 RBX: ffff8800361dd940 RCX: 0000000000080000 [ 186.527166] RDX: ffff880309656e00 RSI: 0000000000000003 RDI: ffff880309696340 [ 186.527166] RBP: ffff8802f5cbbe70 R08: 0000000000000001 R09: 0000000000000001 [ 186.527166] R10: 0000000000001cf2 R11: 0000000000000000 R12: ffff880309696340 [ 186.527167] R13: ffff8800361ddfac R14: ffffffff818d72a0 R15: 0000000000016340 [ 186.527167] FS: 00007fdabba30740(0000) GS:ffff880309640000(0000) knlGS:0000000000000000 [ 186.527168] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 186.527168] CR2: 000000000043eb9a CR3: 00000002f8531000 CR4: 00000000001606f0 [ 186.527169] Stack: [ 186.527169] ffff8802f5cbbe80 ffffffff8156350c ffff8802f5cbbec0 ffffffff810789ee [ 186.527169] 0000000000000286 ffff8800f033f2c0 0000000000000000 ffff8800361dd940 [ 186.527170] 0000000000002051 0000000000000000 ffff8802f5cbbf38 ffffffff810504e8 [ 186.527170] Call Trace: [ 186.527171] [<ffffffff8156350c>] _raw_spin_lock+0x1c/0x20 [ 186.527171] [<ffffffff810789ee>] wake_up_new_task+0xae/0x1b0 [ 186.527171] [<ffffffff810504e8>] _do_fork+0xf8/0x320 [ 186.527172] [<ffffffff81050794>] SyS_clone+0x14/0x20 [ 186.527172] [<ffffffff8156380a>] entry_SYSCALL_64_fastpath+0x1e/0x8e [ 186.527173] Code: 46 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 04 48 63 f6 48 05 00 6e 01 00 48 03 04 f5 a0 72 8d 81 48 89 10 8b 42 08 85 c0 75 1e f3 90 <8b> 42 08 85 c0 74 f7 eb 13 f3 90 8b 37 81 fe 00 01 00 00 74 f4 [ 186.527173] NMI backtrace for cpu 2 [ 186.527174] CPU: 2 PID: 3924 Comm: kworker/u48:5 Tainted: P D OE 4.4.180+ #42661 [ 186.527174] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 186.527175] task: ffff8802faba0000 ti: ffff8802f5efc000 task.ti: ffff8802f5efc000 [ 186.527175] RIP: 0010:[<ffffffff8108f114>] [<ffffffff8108f114>] queued_spin_lock_slowpath+0xc4/0x150 [ 186.527176] RSP: 0018:ffff8802f5eff7b0 EFLAGS: 00000046 [ 186.527176] RAX: 0000000000000000 RBX: 0000000000016340 RCX: 00000000000c0000 [ 186.527177] RDX: ffff880309696e00 RSI: 0000000000000001 RDI: ffff880309696340 [ 186.527177] RBP: ffff8802f5eff7b0 R08: 0000000000000001 R09: 00000000000008e2 [ 186.527178] R10: 0000000000000006 R11: ffffffff81a056ad R12: 0000000000000009 [ 186.527178] R13: ffff880309696340 R14: ffff880309696340 R15: 0000000000000002 [ 186.527178] FS: 0000000000000000(0000) GS:ffff880309680000(0000) knlGS:0000000000000000 [ 186.527179] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 186.527179] CR2: 0000000000000028 CR3: 000000000180a000 CR4: 00000000001606f0 [ 186.527180] Stack: [ 186.527180] ffff8802f5eff7c0 ffffffff8156338d ffff8802f5eff810 ffffffff8155f83d [ 186.527181] 0000000081125b08 0000000000000008 ffff8802faba0000 ffff8802faba0000 [ 186.527181] 0000000000000009 0000000000000046 ffff8802faba0000 0000000000000009 [ 186.527181] Call Trace: [ 186.527182] [<ffffffff8156338d>] _raw_spin_lock_irq+0x1d/0x20 [ 186.527182] [<ffffffff8155f83d>] __schedule+0x8d/0x7c0 [ 186.527182] [<ffffffff8155ff96>] schedule+0x26/0x70 [ 186.527183] [<ffffffff811219f3>] do_exit.cold.24+0x4f/0x74 [ 186.527183] [<ffffffff81007b95>] oops_end+0x85/0xa0 [ 186.527184] [<ffffffff8103ef7c>] no_context+0x12c/0x1d0 [ 186.527184] [<ffffffff8103f141>] __bad_area_nosemaphore+0x121/0x180 [ 186.527184] [<ffffffff8103f1ae>] bad_area_nosemaphore+0xe/0x10 [ 186.527185] [<ffffffff8103f3fb>] __do_page_fault+0x8b/0x3d0 [ 186.527185] [<ffffffff8103f74c>] do_page_fault+0xc/0x10 [ 186.527186] [<ffffffff81565612>] page_fault+0x22/0x30 [ 186.527186] [<ffffffff8106de27>] ? kthread_data+0x7/0x10 [ 186.527186] [<ffffffff8106a2cc>] ? wq_worker_sleeping+0xc/0x90 [ 186.527187] [<ffffffff8155fc21>] __schedule+0x471/0x7c0 [ 186.527187] [<ffffffff8155ff96>] schedule+0x26/0x70 [ 186.527188] [<ffffffff81053b40>] do_exit+0x680/0xa10 [ 186.527188] [<ffffffff81007b95>] oops_end+0x85/0xa0 [ 186.527188] [<ffffffff8103ef7c>] no_context+0x12c/0x1d0 [ 186.527189] [<ffffffff8103f141>] __bad_area_nosemaphore+0x121/0x180 [ 186.527189] [<ffffffff8155fa8d>] ? __schedule+0x2dd/0x7c0 [ 186.527190] [<ffffffff8103f1ae>] bad_area_nosemaphore+0xe/0x10 [ 186.527190] [<ffffffff8103f3fb>] __do_page_fault+0x8b/0x3d0 [ 186.527190] [<ffffffff8103f74c>] do_page_fault+0xc/0x10 [ 186.527191] [<ffffffff81565612>] page_fault+0x22/0x30 [ 186.527191] [<ffffffff810b309b>] ? timecounter_read+0xb/0x50 [ 186.527192] [<ffffffffa019f8c4>] ixgbe_ptp_overflow_check+0x44/0x70 [ixgbe] [ 186.527192] [<ffffffffa0177ff5>] ixgbe_service_task+0x895/0xfd0 [ixgbe] [ 186.527193] [<ffffffff8107130a>] worker_run_work+0x9a/0xe0 [ 186.527193] [<ffffffffa0177760>] ? ixgbe_update_stats+0xe10/0xe10 [ixgbe] [ 186.527193] [<ffffffff810692bb>] process_one_work+0x1db/0x4e0 [ 186.527194] [<ffffffff810695ed>] worker_thread+0x2d/0x4a0 [ 186.527194] [<ffffffff810695c0>] ? process_one_work+0x4e0/0x4e0 [ 186.527195] [<ffffffff8106d9a3>] kthread+0xd3/0xf0 [ 186.527195] [<ffffffff8106d8d0>] ? kthread_worker_fn+0x160/0x160 [ 186.527195] [<ffffffff81563baf>] ret_from_fork+0x3f/0x80 [ 186.527196] [<ffffffff8106d8d0>] ? kthread_worker_fn+0x160/0x160 [ 186.527197] Code: 46 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 04 48 63 f6 48 05 00 6e 01 00 48 03 04 f5 a0 72 8d 81 48 89 10 8b 42 08 85 c0 75 1e f3 90 <8b> 42 08 85 c0 74 f7 eb 13 f3 90 8b 37 81 fe 00 01 00 00 74 f4 [ 186.527197] NMI backtrace for cpu 3 [ 186.527198] CPU: 3 PID: 6 Comm: kworker/u48:0 Tainted: P D OE 4.4.180+ #42661 [ 186.527198] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 186.527198] Workqueue: events_unbound call_usermodehelper_exec_work [ 186.527199] task: ffff8802fb56bfc0 ti: ffff8802fb5a4000 task.ti: ffff8802fb5a4000 [ 186.527199] RIP: 0010:[<ffffffff8108f130>] [<ffffffff8108f130>] queued_spin_lock_slowpath+0xe0/0x150 [ 186.527200] RSP: 0018:ffff8802fb5a7d00 EFLAGS: 00000002 [ 186.527200] RAX: 00000000000c0101 RBX: ffff8802f69a8cc0 RCX: 0000000000100000 [ 186.527201] RDX: ffff8803096d6e00 RSI: 0000000000000000 RDI: ffff880309696340 [ 186.527201] RBP: ffff8802fb5a7d00 R08: 0000000000000001 R09: 0000000000000001 [ 186.527202] R10: ffff8802f8e89ce0 R11: 0000000000000000 R12: ffff880309696340 [ 186.527202] R13: ffff8802f69a932c R14: ffffffff818d72a0 R15: 0000000000016340 [ 186.527203] FS: 0000000000000000(0000) GS:ffff8803096c0000(0000) knlGS:0000000000000000 [ 186.527203] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 186.527203] CR2: 0000000000a74298 CR3: 00000002f6146000 CR4: 00000000001606f0 [ 186.527204] Stack: [ 186.527204] ffff8802fb5a7d10 ffffffff8156350c ffff8802fb5a7d50 ffffffff810789ee [ 186.527205] 0000000000000282 ffff8802fb56bfc0 0000000000000000 ffff8802f69a8cc0 [ 186.527205] 0000000000002050 0000000000000000 ffff8802fb5a7dc8 ffffffff810504e8 [ 186.527205] Call Trace: [ 186.527206] [<ffffffff8156350c>] _raw_spin_lock+0x1c/0x20 [ 186.527206] [<ffffffff810789ee>] wake_up_new_task+0xae/0x1b0 [ 186.527206] [<ffffffff810504e8>] _do_fork+0xf8/0x320 [ 186.527207] [<ffffffff81076d18>] ? check_preempt_curr+0x68/0x90 [ 186.527207] [<ffffffff81076d54>] ? ttwu_do_wakeup+0x14/0xf0 [ 186.527208] [<ffffffff81050734>] kernel_thread+0x24/0x30 [ 186.527208] [<ffffffff81064eea>] call_usermodehelper_exec_work+0x8a/0xa0 [ 186.527209] [<ffffffff8107130a>] worker_run_work+0x9a/0xe0 [ 186.527209] [<ffffffff81064e60>] ? call_usermodehelper_exec_async+0x130/0x130 [ 186.527209] [<ffffffff810692bb>] process_one_work+0x1db/0x4e0 [ 186.527210] [<ffffffff810695ed>] worker_thread+0x2d/0x4a0 [ 186.527210] [<ffffffff810695c0>] ? process_one_work+0x4e0/0x4e0 [ 186.527211] [<ffffffff8106d9a3>] kthread+0xd3/0xf0 [ 186.527211] [<ffffffff8106d8d0>] ? kthread_worker_fn+0x160/0x160 [ 186.527211] [<ffffffff81563baf>] ret_from_fork+0x3f/0x80 [ 186.527212] [<ffffffff8106d8d0>] ? kthread_worker_fn+0x160/0x160 [ 186.527213] Code: 72 8d 81 48 89 10 8b 42 08 85 c0 75 1e f3 90 8b 42 08 85 c0 74 f7 eb 13 f3 90 8b 37 81 fe 00 01 00 00 74 f4 e9 32 ff ff ff f3 90 <8b> 07 66 85 c0 75 f7 39 c1 75 0f 89 c8 be 01 00 00 00 f0 0f b1 [ 186.527215] Kernel panic - not syncing: Hard LOCKUP [ 187.560268] Shutting down cpus with NMI [ 187.560269] Kernel Offset: disabled [ 192.602209] ---[ end Kernel panic - not syncing: Hard LOCKUP
622xs
-
Try on a mac with smb protocol
3 minutes ago, asphixmx said:No cable issue, because on afp protocol (using a Mac) no problems found. Also no problems using ftp.
-
Maybe switch or cable issue ?
-
Sorry, mine is like this, yours is definitely an issue in satamap
-
Don't thank me, as I wrote earlier, pocopico updated the redpill-load, which made this possible, I was just fixing my broken Microserver install, so its pocopico you should be thanking, I didn't do anything
3 minutes ago, mitch55 said: -
Same steps my friend
2 minutes ago, nemesis122 said:Hi whats are the steps for fresh install ????
thank you
-
1
-
-
Nop, I actually migrated directly from DS3615xs 7.0.1, Built the loader and then installed the PAT, my install was actually broken as I updated one of my data servers and it started to shutdown after boot, however latest redpill update fixed it, I just rebuilt the loader and it fixed the shutdown issue
3 minutes ago, zahni said:Did you do the upgrade to 7.1 inside DSM running on 7.0.1 and then reboot into the TC build mode ?
-
1
-
TinyCore RedPill loader (TCRP) - Development release 0.9
in Developer Discussion Room
Posted
Yes I can test no problem, can we please also do the test with the driver removed ?