cseb

With jun's loader and the HPSA module added to the extra.lzma the server boots but the drive is not recognised correctly with 'Capacity read failed' in the var/log/message. I try to use the 5.2 version and that's work perfectly... Could U help me to solve this pb.

Hi, I try to use P410 sas controler with june loader. I compile the HPSA driver and add it to the extra.lzma. The server boot but the drive is not recognize correctly with 'Capaicity read failed' in the var/log/message. I try to use the 5.2 version and that's work perfectly... Could U help me to solve this pb.

DiskStation> cat /sys/class/scsi_disk/0\:0\:0\:0/device/unique_id [35614.130111] BUG: unable to handle kernel paging request at 00000001000000df [35614.163742] IP: [<ffffffff814ab928>] _raw_spin_lock_irqsave+0x8/0x30 [35614.194153] PGD 13e716067 PUD 0 [35614.209543] Oops: 0002 [#1] SMP [35614.224975] Modules linked in: usbhid hid broadwell_synobios(PO) button ax88179_178a usbnet tg3 r8169 bnx2x(O) bnx2 vmxnet3 pcnet32 e1000 sfc netxen_nic qlge qlcnic qla3xxx pch_gbe ptp_pch sky2 skge jme ipg uio alx atl1c atl1e atl1 libphy mii libcrc32c r8168(O) ixgbe(O) igb(O) i2c_algo_bit e1000e(O) dca vfat fat mdio sg hpsa mpt3sas(O) mpt2sas(O) megaraid_sas ata_piix mptctl mptsas mptspi mptscsih mptbase scsi_transport_spi megaraid megaraid_mbox megaraid_mm vmw_pvscsi BusLogic usb_storage etxhci_hcd xhci_hcd uhci_hcd ohci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O) el000(O) [last unloaded: broadwell_synobios] [35614.489206] CPU: 1 PID: 7957 Comm: cat Tainted: P O 3.10.102 #15047 [35614.523515] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 11/02/2015 [35614.557308] task: ffff880141cc78d0 ti: ffff88013e2f8000 task.ti: ffff88013e2f8000 [35614.593158] RIP: 0010:[<ffffffff814ab928>] [<ffffffff814ab928>] _raw_spin_lock_irqsave+0x8/0x30 [35614.635530] RSP: 0018:ffff88013e2fbe08 EFLAGS: 00010082 [35614.660938] RAX: 0000000000000282 RBX: ffff88013e967170 RCX: 00000000ffffffff [35614.695448] RDX: 0000000000000100 RSI: ffffffffa0296ae0 RDI: 00000001000000df [35614.729641] RBP: 00000001000000df R08: ffffea00045a7098 R09: 000000000003f095 [35614.763885] R10: 00000000000002b5 R11: 0000000000000246 R12: ffff88013e464a40 [35614.798030] R13: 0000000000001000 R14: ffff88013c38b438 R15: ffff88013e694000 [35614.832476] FS: 00007f132cdc6700(0000) GS:ffff880147a20000(0000) knlGS:0000000000000000 [35614.871102] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [35614.899213] CR2: 00000001000000df CR3: 000000013e6cf000 CR4: 00000000001407e0 [35614.933305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [35614.968336] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [35615.002562] Stack: [35615.012320] ffffffffa028acc1 ffff880143238a40 ffffffff810d121e ffff880000000000 [35615.047929] 00000000ffffff9c ffff880100000000 ffff88013e2fbf40 0000000000000001 [35615.083193] 0000000000000000 ffff88013e2fbf30 ffffffff81109a1f ffff88014216e5e0 [35615.118747] Call Trace: [35615.130651] [<ffffffffa028acc1>] ? unique_id_show+0x31/0x190 [hpsa] [35615.161826] [<ffffffff810d121e>] ? handle_mm_fault+0x13e/0x2a0 [35615.190384] [<ffffffff81109a1f>] ? do_filp_open+0x2f/0x70 [35615.216803] [<ffffffff812f1967>] ? dev_attr_show+0x17/0x50 [35615.243250] [<ffffffff81163209>] ? sysfs_read_file+0x99/0x170 [35615.271163] [<ffffffff810f3929>] ? vfs_read+0x99/0x160 [35615.296130] [<ffffffff810f4b19>] ? SyS_read+0x59/0xb0 [35615.320469] [<ffffffff814ac3b2>] ? system_call_fastpath+0x16/0x1b [35615.350265] Code: 1f 40 00 f0 ff 07 48 8b 3c 24 e9 64 c3 b8 ff 0f 1f 40 00 f0 81 07 00 00 10 00 48 8b 3c 24 e9 50 c3 b8 ff 9c 58 fa ba 00 01 00 00 <f0> 66 0f c1 17 0f b6 ce 38 d1 74 0d 0f 1f 40 00 f3 90 0f b6 17 [35615.441686] RIP [<ffffffff814ab928>] _raw_spin_lock_irqsave+0x8/0x30 [35615.472973] RSP <ffff88013e2fbe08> [35615.490103] CR2: 00000001000000df [35615.506048] ---[ end trace 9fecfcee13bde62f ]--- Killed

hello, dans var/log/message j'ai ca : Aug 10 16:34:40 raidtool: partition_clean.c:45 Failed to do '/sbin/sfdisk --fast-delete -1 /dev/sda' Aug 10 16:34:40 raidtool: partition_table_add.c:30 Failed to add ms-dos signature to /dev/sda, err=65280 Aug 10 16:34:40 raidtool: partition_table_add.c:30 Failed to add ms-dos signature to /dev/sda, err=65280 Aug 10 16:34:40 raidtool: partition_create.c:117 Failed to partition disk /dev/sda, err=255 Aug 10 16:34:40 raidtool: raidtool.c:640 Failed to create system partition of /dev/sda, newlayout=8, errno=0x2000 Aug 10 16:34:40 raidtool: raidtool.c:677 No disk to create system and swap partition, initsys fail! Aug 10 16:34:40 install.cgi: ninstaller.c:2272 szCmd=[/usr/syno/sbin/installer.sh -r >> /tmp/installer_sh.log 2>&1], retv=[1] Aug 10 16:34:40 install.cgi: ninstaller.c:2305 retv=[1] Aug 10 16:34:40 install.cgi: ninstaller.c:2310(ErrFHOSTDoFdiskFormat) retv=[1] Aug 10 16:34:40 install.cgi: install.c:1158 FormatPartition fail je ne vois vraiment pas ce qui peut merder, auriez vous une idée ? Merci

Same issu with one logical drive and only one disk. What can I fill in the grub.cfg especially for the sataportmap and sasremap ?

Bonjour, J'ai testé avec une carte hp P410. j'ai ajouté le module HPSA.KO dans l'image. J'ai créé un raid 0 avec un disque. Lorsque je boote sur la clé usb. J'arrive a accéder sur l'assistant d'installation. Il me propose d'installer dsm sur 1 disque mais l'instal se plante avec comme erreur " échec de formatage du disque (35)" Je ne sais pas trop quoi renseigner dans le grub.cfg au niveau du sataportmap et sasremap. Avez vous une idée ? Merci

Hi everyone, I try to install DSM6 on HP Gen8 with SAS controler HP410 I configure 2 logical drive. Each logical drive contain one physical disk (Raid 0) I have compiled hpsa.ko and add on to the extra.lzma. I have maked the Usb Key The server boot on the usb key... I have access to the wizard to install dsm I select the 2 disk but the install stop with error 35 : failed to format the disk. Could You help me to solve this problem ? Thanks

Bonjour, sur les loader Jun, il n'y a plus autant de drivers d'intégrés. Il y a un tuto pour inclure des drivers spécifiques. https://xpenology.club/compile-drivers-xpenology-with-windows-10-and-build-in-bash/ Tiens moi informé car j'attends un gen8 pour y mettre des disque sas sur une hp410.

Hi, I haven't no grub_ver files on the usb stick .... any idea ? thanks

Hi, Someone can explain me how to modify the GRUB_VER on the USB stick? Thanks

Hi could You tell me how to update the Gub_ver ? i couldn't find it. Thanks

Hi everyone, Could you teel me if HP P410 Sas controller works with the jun's loader ? if not someone have integrated the driver ? Thanks

qq'un peut me dire si la carte SAS hp410 est reconnu avec le loader Jun ? Merci d'avance