hawie

Members
  • Content count

    21
  • Joined

  • Last visited

Community Reputation

0 Neutral

About hawie

  • Rank
    Junior Member
  1. already the case today with Jun's loader, at least with my N40L ... it's good news. but I found nothing /lib/modules/powernow-k8.ko found nothing cpufreq-set utilities. in dsm 5.x: insmod /lib/modules/powernow-k8.ko cpufreq-set -c 0 -g ondemand cpufreq-set -c 1 -g ondemand power meter show 5x watts if N54L cpu run on demand, 7x watts if not.
  2. best wishes, next release 2.3 integrated with cpufreq support. also powernow driver (for AMD cpu, N54L...etc), which supported in DSM 5.x.
  3. DSM 6.x.x Loader

    YES! it's correct. now update 7. the problem was, jun's loader did not mount the usb stick device with synoboot official vid 0xf400 / pid 0xf401. sfdisk -l shows no synoboot device. thanks a lot! add: In other words, jun's loader protected the usb stick not to be changed. ^_^
  4. DSM 6.x.x Loader

    Did you upgraded from DSM 5->DSM6? Or Clean installed DSM 6? I'm asking because i also have an HP N54L and successfully installed Update 7 with no problem at all. Clean installed DSM 6 with update 5. I did not install the update 6. just do online upgrade to update 7, 100% done, but prompt 'update failed...' try manual update 6/update 7, fails too. It's grade to know N54L works with update 7, I'll try it again. thx.
  5. DSM 6.x.x Loader

    Have you tried the upgrade fromthe control panel on the disk station ? Just did the 7'th update and everything went fine and straight forward... after online upgrade failed, try d/l update file first, then manual update. still no lucky.
  6. DSM 6.x.x Loader

    update to 7 fails too. also tried update 6 first, exactly the same results. so, remains update 5 version. waiting for new progress... BTW: AMD cpu, N54L, ...
  7. DSM 6.x.x Loader

    Congratulations! actually, I have one BAREMETAL N54L, updated to 6.0.2 update 5, too. but met some problems: 1) /etc/synoinfo.cfg, changed: internalportcfg=“0x00f" esataportcfg=“0xffff0" usbportcfg=“0xf00000" but esata disk not appears. "appended SataPortMap=4" would help this? any grub.cfg sample lines? thanks. 2) missing button.ko & acpid, can not power off when press power button. 3) missing powernow-k8.ko, can not power saving. ...maybe need recompiled, still found no source. any help? Thx a lot for this great forum and tutorials finally got my nas running.. - jun´s loader v1.01 (DSM 6.0.2-8451 Update 5) - Asrock J4205-ITX J4205 Apollolake SOD/U3/4S3 M-ITX - 8GB (1x 8192MB) HyperX Impact Black DDR3L-1600 SO-DIMM CL9 Single - 2x WD Red 3TB - Mach Xtreme Technology Ultra MX-ES MXUB3SESU-16G 16GB USB-Stick, USB 3.0 - Intel EXPI9301CTBLK PRO1000 Ethernet Adapter CT with flashed MAC address - PicoPSU-90 12V DC-DC ATX mini-ITX 0-90W power supply with Salcar 72W Transformator (12V 6A) - Raijintek Metis Mini-ITX case with Noctua NF-S12A FLX fan i would also ask like hawie if anybody please could help with this: - hdd hibernation - Power button shutdown - auto shutdown when no access / power safe i´ve read most of the post and first of all tried this http://xpenology.com/forum/viewtopic.php?f=2&p=75406#p75404 with no success. unzipped it an copied all files to their specific folders. no way very important information for me, thanks. Power button shutdown works now. FYI: sudo -i cd / tar zxvf power-off-repacked-for-dsm602.tar.gz reboot file attached, with minor fix. mega.nz not working. please access this link instead: http://pan.baidu.com/s/1miFcas4
  8. DSM 6.x.x Loader

    Congratulations! actually, I have one BAREMETAL N54L, updated to 6.0.2 update 5, too. but met some problems: 1) /etc/synoinfo.cfg, changed: internalportcfg=“0x00f" esataportcfg=“0xffff0" usbportcfg=“0xf00000" but esata disk not appears. "appended SataPortMap=4" would help this? any grub.cfg sample lines? thanks. 2) missing button.ko & acpid, can not power off when press power button. 3) missing powernow-k8.ko, can not power saving. ...maybe need recompiled, still found no source. any help?
  9. DSM 6.x.x Loader

    Board with NEC uPD720201 chip, works fine OOB.
  10. Working DSM 6

    so far so good! The official e1000e driver, support your NIC, intel 82567LM. I tried one 82574L (id 8086-10D3), no lucky
  11. Working DSM 6

    thx @oktisme, everything works! Would u please release one usb bootable img version? it's very important to us.
  12. Working DSM 6

    Did anybody try it with Broadcom BCM5723 NIC (HP N54L Integrated)? is it official supported w/o Extra drivers?
  13. Any schedule for just released 6.0-7321-1?

    Don't expect it any time soon. It's the first version expected so much
  14. Any schedule for just released 6.0-7321-1?

    DSM 6 beta 2 tool chain released, is it helpful?