tigs
-
Posts
47 -
Joined
-
Last visited
Posts posted by tigs
-
-
any help is greatly appreciate.
I was using the automated arpl loader (not the latest with 7.2 support) running 7.1. seeing people update to 7.2 with success. I attempted and failed. I did not realized people are using a different loader, 18n loader.
after changing to the new loader and try again. still no life. trying to force re-install OS. the box boots and ask me to migrate, which I did. It boots but eventually will shut off while trying to start service.
I read the tutorial about accessing the DSM data partition. It did not work saying no array configuration is found.
what are the options?
If I delete the OS and swamp partition and try again, will this work?
thanks
-
thanks.
I bought the PCI-e x8 extension cable. so I can't really do anything without a display. I need to change the bios setting to let it boot from the USB flash drive.
Other two ideas are:
1. If I can let boot from the internal M. 2 SSD, I can install vmware hypervisor, which is even better.
2. My understanding is, as long as you do not write to the internal flash, you can always revert it to ReadyNAS by change the boot order in the BIOS to internal flash, correct? Xpenology is purely USB based loader, and it does nothing to the internal flash. Do I understand it correctly?
additionally, is there any way we backup the internal flash to an image and write it back when needed, in case? I believe that is what the ReadyNAS USB Recovery Tool does, correct?
-
On 3/14/2023 at 5:08 AM, Luks1983 said:
Yesterday i successfully installed xpenology on my Netgear ReadyNas RN316.
Great news.
Did you install the DSM 7 or the jun loader?
I have a 628x without video output and I can not get it to boot from the USB drive at all. is there any trick other than trying different USB sticks?
I tried a few already. It always boot to REadyNAS OS.
It would be great if I can load the xpenology.
another question, the process of installing teh xpenology will impact the internal flash/USB boot drive, correct? so that I can always revert to native Readynas OS, correct?
Thanks
-
I got this error using your script? any idea?
root@NVR:~# curl -L "https://github.com/PeterSuh-Q3/rp-ext/raw/main/nvme-cache/src/nvme-cache.sh" -O % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 203k 0 203k 0 0 594k 0 --:--:-- --:--:-- --:--:-- 594k root@NVR:~# chmod +x nvme-cache.sh root@NVR:~# ./nvme-cache.sh ./nvme-cache.sh: line 7: syntax error near unexpected token `newline' ./nvme-cache.sh: line 7: `<!DOCTYPE html>'
DVA3221 arpl
thanks
-
On 2/18/2023 at 8:35 PM, tigs said:
Setting a VM DVA3221 is fairly easy. However, I have been unable to access the device from Windows 10 explorer/network. It always tells the username and/or password are incorrect. Does anyone else have this issue?
I cannot even SSH into the VM. Any idea?
-
Hi folks,
I have a question and hope someone can help.
I set up VM DS918 within ESXi. When I try to access it under Windows Explorer/network, It would not let me. It says username or password incorrect. I know they are correct. I have no problem accessing my real Synology NAS. Any idea how I can fix it?
Thanks
-
Setting a VM DVA3221 is fairly easy. However, I have been unable to access the device from Windows 10 explorer/network. It always tells the username and/or password are incorrect. Does anyone else have this issue?
-
On 2/8/2023 at 8:46 PM, fbelavenuto said:
Check if "misc" addon is selected.
Thanks buddy. Figured out!! It was a combination of things, BIOS and graphics card. Excellent work. Really appreciate your work.
-
I want to thank both of you for your help. After another weekend, I finally got it to work. The CPU is fine. I made a number of changes:
1. re-flashed to BIOS to an earlier version, reset the BIOS
2. I replaced the very old graphics card
It finally worked and I can no tell for sure what exactly did the trick.
Changing to legacy boot mood did not help me.
Wonderful people here. Keep up the good work guys!
-
1
-
-
Hello guys, I need your help,
I have been trying to get this to work quite a few days without any success. I would appreciate any advice or direction to the right place.
I have been playing with both this automated or the other non-automated to setup DVA3221 on lenovo P300 thinkstation with xeon E3-1245 v3 CPU and Intel I217LM onboard NIC.
The outcome used to be "automatic shutdown" of the computer once the pat file is installed. This is still the case with the automated loader. I am able to install the pat file, just won't stay on.
With this standard loader, it used to be the same a a few days back. I was able to install the pat, but computer shut off automatically. Since a few day ago, i believe with the new script, I can not even boot the loader any more. It always gives "file /zimage" is not found.
I have tried several USB drives, teh USB were even low level formatted. The HDD was also cleanly wiped with gparted.
Here is the list of commands I ran through.
sudo su ./rploader.sh update ./rploader.sh fullupgrade ./rploader.sh identifyusb ./rploader.sh serialgen DVA3221 ./rploader.sh satamap ./rploader.sh ext denverton-7.1.0-42661 add https://raw.githubusercontent.com/OrpheeGT/redpill-ext/master/acpid/rpext-index.json ./rploader.sh build denverton-7.1.0-42661 auto exitcheck.sh rebootPID and VID are fixed before building the loader and confirmed after.
SN and MAC are random.
Any advice and pointer to the right direction is greatly appreciated.
-
Hello Guys and hopefully @fbelavenuto
I have been playing with both this automated or the other non-automated to setup DVA3221 on lenovo P300 thinkstation with xeon E3-1245 v3 CPU and Intel I217LM onboard NIC.
arpl-1.0-beta13 AND tinycore-redpill.v0.9.4.0
The process is fairly simple and straightforward. Everything went well until the last step when I "Boot the Loader". It booted up to USB with verbose. It is very short lived, for less than a minute. It would shut down automatically. There were occasions i was quick enough to connect from within the Synology assistant. the web page was loading and stuck at http://xxx.xxx.xx.xx:5000/timestamps ?, then computer would shut down.
I have been playing with for the past 3 days with no progress.
auto serial N
auto Mac
PID and VID are correct
Thanks
-
-
On 3/29/2020 at 6:56 AM, likeadoc said:
Thanks: here is output and it was a success!!
Can we patch all 3 versions? right now it does not seem to allow. Once you patched one of them, the only option is to "RESTORE" even if you do "./patch.sh -p".
Great work!!
ash-4.3# sha1sum /volume1/@appstore/MediaServer/bin/synocodectool 1d01ee38211f21c67a4311f90315568b3fa530e6 /volume1/@appstore/MediaServer/bin/synocodectool -
2 hours ago, tigs said:
There are actually 3 versions :
/usr/syno/bin/synocodectool
/volume1/@appstore/MediaServer/bin/synocodectool
/volume1/@appstore/VideoStation/bin/synocodectool2 hours ago, tigs said:Hi OP,
Can you kindly update the patch to latest version?
thanks
root@DiskStation:/# ./patch.sh -p Detected DSM version: 6.2.3 25426-0 Patch for DSM Version (6.2.3 25426-0) not found. -
Hi OP,
Can you kindly update the patch to latest version?
thanks
root@DiskStation:/# ./patch.sh -p Detected DSM version: 6.2.3 25426-0 Patch for DSM Version (6.2.3 25426-0) not found. -
Hi all,
I am having difficulty with setting up my xpenology box. I have:
1 x SSD, right used for apps only
2 x 3 Tb hard drives
2 x 8 Tb hard drives
1 x 4 Tb USB drive
I am having difficulty with designing a system that is secure and crash safe. I like to have multiple backups. I also don't like RAID as it is harder to recover, and I'd prefer ext4 file system over btrfs as ext4 is easier to access once it crashes.
The server is mostly for media and secure file server and storage, and backups of my computer files. I don't hav a lot of files, a few Tbs. My biggest concern is crash and file loss.
I currently use 1 3-tb drive as the main data drive, backed-up locally to an internal 8-tb drive, and a second copy to the external 4-tb USB drive.
I am thinking about LUN for desktop computers, then backup these LUNs the same way as above. I just don't how I can access/recover these LUNs if the NAS or computer crash. I don't know whether LUN works well with ext4 file system and non-raid drives.
I would like you guys' input. The system is being rebuilt, so a good time to plan out.
Thanks
-
Sorry, I did not mean to hijack the thread.The reason I jumped in is because OP brought me in and asked me a question under my thread. My post here is meant to clarify exactly my situation so people know what was going with mine problem, FYI only. It may provide helpful details, or maybe not.
Again, My appology.
-
This is a very odd issue. Mine is a supermicro Rangeley 8-core Atom board, A1SRi-2758F. It runs 1.02b (DSM6.1.7) perfectly fine. But I can not install 1.03b, the DSM 6.2.
For some reason, the 1.03b is very different. I have tried many different USB thumb drives, 3 unamed, 1 lexar, 2 kinston, 1 kingaru. no luck.
I have also tried to install 1.03b on two lenovo thinkstation, no luck, 1 mac mini 2012, no luck.
All with no issue with 1.02b.
The reason I think it is USB drive, is when I tried to install 1.02non the mac mini. The unamed USB worked fine. Then I though Ishould use an SD card it does not protrude. The SD card behaved exactly the same as I descrided above, same error message.
With every change of USB drive, I updated the VID and PID.
-
1 hour ago, StandardToast said:
I also get this issue on a super micro board. Did you find any other solution? I too have tried multiple thumb drives
unfortunately, NO
-
On 12/30/2019 at 1:14 PM, IG-88 said:
i had a case once (avoton system) where installing failed but running from a installed usb/disk combination worked
i'd try that that 1.03b usb and one of the disks you want to use in a different hardware, if the usb is ok then it should work on a different hardware, after installing move both to your C2538 system and see if it boots
i never found out why it was not installing, you would need to connect a serial (null modem) cable to find out whats going on and even then you might not want to dig in that deep into the synology install process, much easier to try to "skip" install and doing this step on a different hardware
also to spare some update trouble you might start with the latest 6.2.2 version (there are matching drives available now)
I had a chance to give it another attempt. I have tried more than 5 different USB thumb drives, all failed. Very odd. It is not the NIC driver issues. I had a feeling it is related to USB thumb drive, but I don't know what.
-
Supermicro Board with Intel Atom C2538
trying to install DSM_DS3617xs_23739 with bootloader 1.03B. here is the error message.
It has no issues with DSM 6.1 and bootloader 1.02b.
thanks
-
I have using the earlier version of the loaders without any issues. It ran DSM 6.1.7. thinking about updating to 6.2 using loader 1.03b ds3615xs. Ihave been unsuccessful. the network card is recognized showing as migratable. I tried to install the DSM 6.2, it crashes in the middle of installation of DSM. Here is the screenshot. Any idea?
I have tried 1.03b ds3617 as well, same symptoms.
thanks
-
-
On 8/31/2018 at 4:20 AM, sbv3000 said:
if you open the 30mb partition of the img file in ofsmount, its in there
Sorry, I am just dumb. using the OSFmount, I can mount the 30Mb partition and see the extra file. now what? what do i do with it? thanks
recovering a failed update from 7.1 to 7.2 DVA3221
in General Questions
Posted
never mind, I solved it myself.
I downgraded the NAS to DS918+, and all the data partitions are intact.